Tyramide alkyne - Moligand™, 10 mM in DMSO , CAS No.2230051-33-7

CAS: 2230051-33-7 Cat. No.: T1498107 Fórmula: C14H17NO2 Peso molecular: 231.29
Disponível para encomenda
GRAU & PUREZA Moligand™ ? Moligand™ — Aladdin's line of ligands and bioactive small molecules. Use for receptor, pathway, and binding studies needing defined small-molecule tools. 10 mM in DMSO
Storage
Protected from light,Store at -80°C
Shipped In
Dry ice packs + Cold packs
★
Tamanho
Alemanha (EU)
USA*
Preço
Qtd
1ml
T1498107-1ml
Sob encomenda · 8–12 semanas
130,94€
Enter a quantity for the sizes you want to add.

Visão geral

Tyramide alkyne is an alternative labeling substrate that can be coupled to detection or enrichment moieties via a Copper-catalyzed Azide/Alkyne Cycloaddition (CuAAC) “click” reaction. Tyramide alkyne can be used for ascorbate peroxidase 2 ( APEX2 ) labeling.

Especificações

Especificações e pureza
Moligand™, 10 mM in DMSO
Condições de armazenamento de armazenamento
Protected from light,Store at -80°C
Enviado em
Dry ice packs + Cold packs
Este produto requer transporte de cadeia fria. Serviços terrestres e outros serviços econômicos não estão disponíveis.
Grau
Moligand™
Nomes e identificadores
Peso molecular
231.29

Dados avançados

Certificados(CoA,COO,BSE/TSE e Mapa de Análise)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluções
Revisões

Avaliações dos Clientes

Application Protocols

No item-specific, vendor-validated protocols or recommended dilutions are provided for SKU T1498107. Refer to the CoA and SDS for any lot-specific handling notes.

Scope note: This product is supplied for research use only. Users typically adapt standard TSA and CuAAC workflows from the primary literature, optimizing concentrations, incubation times, and buffer composition for their specific samples and detection modalities.

Biological Roles

Item intent: research chemical probe for biochemical labeling. No endogenous biological role is implied for this SKU. The remarks below describe how tyramide-alkyne reagents operate in biological experiments (general/literature), not therapeutic effects.

  • Enzymatic substrate: The phenolic moiety is a substrate for heme peroxidases (e.g., HRP). In the presence of H2O2, HRP generates a phenoxy radical that forms covalent bonds with electron-rich amino acids (predominantly tyrosine) on proteins near the enzyme, creating a stable deposit.
  • Bioorthogonal handle: The terminal alkyne is chemically inert to most biological functional groups, enabling selective post-labeling ligation to azide-functionalized reporters via CuAAC.
  • Spatial amplification: Because deposition occurs only near active peroxidase, the approach amplifies signal without broadly modifying distal biomolecules, enabling high-contrast imaging and proteomic mapping of microenvironments.
  • Compatibility: TSA-style labeling is commonly performed in fixed cells/tissues and, with careful control of peroxide and copper, can be adapted to live-cell–adjacent workflows. Copper and peroxide can perturb biology; conditions must be optimized to limit toxicity.

Not a nutrient, metabolite, or drug: There is no known physiological function for the tyramide-alkyne tag itself; its utility derives entirely from its reactivity under engineered assay conditions.

Research Use Note: For research use only.

Buffer Applications

This product is not a buffering reagent and is not used to control solution pH. Accordingly, classic buffer system design (pKa selection, capacity calculations) does not apply.

Practical notes for assay buffers in which this reagent is typically used (general/literature guidance; not product specifications):

  • TSA deposition buffer: Commonly phosphate-buffered saline (PBS) or Tris-buffered saline (TBS), pH ~7.2–7.6, containing a controlled, low concentration of H2O2 to initiate peroxidase catalysis. Avoid high levels of competing phenols or strong nucleophiles that could quench phenoxy radicals.
  • Detergents: Low percentages of Tween-20 can reduce nonspecific interactions but may influence deposition; titrate for your system.
  • CuAAC reaction buffer: Aqueous or mixed aqueous/organic media with CuSO4, a reducing agent (e.g., sodium ascorbate), and a copper-stabilizing ligand (e.g., THPTA) to enable efficient click coupling to azide reporters.

For actual buffer recipes and validated conditions, consult primary literature and optimize empirically for your assay. Refer to the product CoA/SDS for compatibility notes specific to your lot.

Green Alternatives

Opportunities to improve the environmental and safety profile while maintaining performance are primarily in solvent/catalyst choice and workup.

Considerations and alternatives (general):

  • Replace/Reduce copper for click: If copper exposure is a concern (cell toxicity, waste), consider strain-promoted azide–alkyne cycloaddition (SPAAC) using cyclooctynes on the reporter side. Tradeoff: SPAAC reagents are bulkier/costlier and may react slower; alkyne-only substrates like this SKU require CuAAC by design unless the azide partner is strained.
  • Aqueous-friendly ligands: THPTA or BTTAA can enable efficient CuAAC in predominantly aqueous media, reducing organic solvent usage compared with tBuOH-rich systems.
  • Solvent selection: Favor DMSO over DMF for reduced toxicity and better biodegradability profile; minimize VOCs such as acetonitrile or dichloromethane in workups.
  • Copper minimization: Use minimal effective copper concentrations and scavenge post-reaction with chelators (EDTA/BCS) to lower metal waste. Employ solid-supported copper catalysts when feasible to facilitate recovery.

Illustrative comparison (general guidance):

  • CuAAC (this product’s typical path): Fast, high-yielding, small handle; requires Cu(I), generating metal-containing waste; excellent for dense labeling.
  • SPAAC (alternative workflow): Metal-free, biocompatible; slower kinetics and larger tag; requires strained azide/alkyne partner.

Process hygiene:

  • Batch aqueous workups at neutral pH and use cartridge desalting to reduce solvent consumption.
  • Implement light-controlled handling to extend shelf life, reducing material waste.
Pharmaceutical Uses

This material is not offered as a pharmaceutical active ingredient or excipient and is designated For research use only.

Contextual notes (general information, not product claims):

  • Tyramide-alkyne probes are chemical biology tools for assay signal amplification and target proximity labeling. They are not described in pharmacopeial monographs and are not intended for human or veterinary use.
  • In drug discovery labs, such probes may assist in target validation, interactome mapping, and high-content imaging, indirectly supporting preclinical research workflows.

Regulatory status: No pharmacopoeial or GMP grade is indicated. For any application beyond laboratory research, the user is responsible for establishing suitability, safety, and compliance.

Physical Properties

The following item-specific physicochemical parameters have not been provided by the supplier for SKU T1498107. Always consult the product CoA/Spec Sheet for definitive specifications.

Item-specific (specification):

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Melting point / boiling point: Not specified for this item; refer to CoA/Spec Sheet.
  • Density, refractive index, UV cutoff: Not specified for this item; refer to CoA/Spec Sheet.
  • Solubility: Not specified for this item; refer to CoA/Spec Sheet.

General/literature guidance for tyramide-alkyne reagents (not product specifications):

  • Physical state: Many tyramide derivatives are off-white solids; alkyne-tagged variants are typically solid at ambient conditions.
  • Solubility behavior: Readily soluble in polar aprotic organic solvents such as DMSO or DMF; limited aqueous solubility prior to conjugation. After CuAAC derivatization with polar azides, solubility can increase.
  • Stability: Phenolic substrates are light-sensitive and can slowly oxidize; alkyne handles are generally stable but can undergo Glaser coupling under copper/air. Supplier instructs protection from light and storage at −80°C, consistent with maintaining reactivity.
  • Partitioning: The phenolic OH and amide lower lipophilicity relative to purely hydrocarbon tags; logP is typically moderate for similar scaffolds (literature trend), facilitating cell/tissue permeation in TSA workflows.

Note: The above are general characteristics of the class and are not specifications for this item.

Quality and Grades
  • Item grade: Moligand™ (as provided). No additional numeric purity or stabilizer details are specified for this item; refer to CoA/Spec Sheet for analytical data.

What Moligand™ typically implies (general program description, not a specification):

  • Research-grade small-molecule intended for ligand discovery, chemical biology, and screening. Emphasis is typically placed on structural integrity and performance in assay-relevant solvents (e.g., DMSO) rather than pharmacopeial compliance.
  • Batch documentation: CoA normally includes identity confirmation (e.g., NMR/HRMS/LC), and, where relevant, assay purity by HPLC. For this SKU, specific methods/thresholds are not provided here.

Considerations for tyramide-alkyne reagents:

  • Light sensitivity and low-temperature storage (−80°C) are specified, indicating preservation of peroxidase-reactive phenol and the terminal alkyne.
  • For imaging/proteomics, low background deposition and clean click performance are critical; inquire about residual metal content and UV profile if your application is LC-MS–sensitive. If not listed on the CoA, request vendor data.

Recommendations to end users:

  • Upon receipt, record lot number and download the lot-specific CoA. Verify identity and purity to your internal thresholds (e.g., LC-MS, 1H NMR) before high-value experiments.
  • If your workflow is copper-sensitive (cells/tissues), consider testing for trace copper and using copper-chelating workups after CuAAC to reduce background in downstream analyses.

Research Use Note: For research use only.

Reaction and Applications

This reagent is designed for enzyme-mediated deposition followed by click conjugation, enabling high-sensitivity detection and enrichment.

Core application families (general/literature):

  • Tyramide Signal Amplification (TSA): Horseradish peroxidase (HRP) catalyzes one-electron oxidation of the phenolic moiety to a short-lived phenoxy radical that covalently couples to electron-rich residues (notably tyrosines) proximal to the enzyme locus. The deposited alkyne handle supports post-labeling derivatization via CuAAC.
  • Proximity labeling/proteomics: Enzyme-targeted HRP fusions or peroxidase-dependent antibodies deposit alkyne tags on nearby proteins. Subsequent CuAAC with azido-biotin enables streptavidin enrichment and LC-MS proteomics.
  • Microscopy and blotting: After TSA deposition, CuAAC with azide fluorophores or haptens provides amplified signal for IHC/IF or membrane-based assays.

Mechanistic and practical notes:

  • Control H2O2 concentration and incubation time to balance signal amplification with background. Excess peroxide increases nonspecific deposition.
  • For CuAAC, use copper(I) generated in situ (CuSO4 + sodium ascorbate) with stabilizing ligands (e.g., TBTA/THPTA) to accelerate reaction and limit oxidative side reactions. Thoroughly remove copper afterward to reduce autofluorescence and proteome oxidation.
  • Blocking steps and detergent levels affect deposition patterns; optimize for each tissue/cell line.
  • Light protection preserves phenol integrity; prepare fresh working solutions immediately before use.

Extensions:

  • Alternative downstream tags: azido-rhodamine, azido-fluor 488/555/647, azido-PEG-biotin, azido-affinity resins.
  • Multiplexing: Orthogonal cycles can be achieved by stripping/chelating copper and using distinct azide reporters in sequential rounds.
Reaction Conditions

Guidance below summarizes commonly reported conditions for the two core steps enabled by a tyramide-alkyne reagent. These are literature/general recommendations and not product specifications.

  1. Peroxidase-mediated deposition (TSA):
  • Enzyme: HRP-conjugated antibody or HRP fusion localized to target of interest.
  • Buffer: PBS or TBS, pH 7.2–7.6; protect solutions from light.
  • Substrate: Freshly prepared working solution from a concentrated DMSO stock; typical incubation at room temperature.
  • Initiation: Add H2O2 at low, controlled concentration; incubate minutes to tens of minutes while monitoring background.
  • Quench: Remove substrate and quench residual peroxidase activity (e.g., sodium azide or specific peroxidase quenchers) as appropriate for the downstream application.
  1. CuAAC to install reporter tags:
  • Catalyst: CuSO4 (50–200 µM) with sodium ascorbate (0.5–5 mM) to generate Cu(I) in situ; include a stabilizing ligand (e.g., THPTA/BTTAA, 0.25–1 mM) for aqueous systems.
  • Solvent: H2O with 5–30% DMSO or tBuOH; room temperature to 37°C; typical reaction time 15–60 min for surface-accessible labels.
  • Stoichiometry: Use 2–10 equiv of azide reporter relative to estimated alkyne sites for efficient conversion.
  • Post-reaction: Thorough washing and copper chelation (e.g., EDTA) to minimize residual metal and background fluorescence.

Controls and validation:

  • Include minus-H2O2 and minus-HRP controls to estimate nonspecific adsorption and background click.
  • Optimize peroxide and substrate concentrations empirically for each sample type to balance sensitivity and specificity.
Safety and Handling

Authoritative safety information resides in the product SDS. The following consolidates available item data with general best practices.

Item-specific hazards provided: None. GHS classification, pictograms, signal word, and H-statements are not specified for this item; refer to SDS.

Handling and PPE (general laboratory guidance):

  • Use in a chemical fume hood. Wear lab coat, safety glasses, and appropriate chemically resistant gloves (e.g., nitrile). Avoid inhalation of dust/aerosols and skin/eye contact.
  • Protect from light to minimize premature oxidation. Avoid prolonged exposure to air and moisture.

Substance- and use-specific risks (general):

  • Phenolic/peroxidase substrate: In TSA workflows, hydrogen peroxide and peroxidases (e.g., HRP) are used. H2O2 is an oxidizer and irritant; manage carefully and quench appropriately.
  • Alkyne handle: Cu-catalyzed azide–alkyne cycloaddition (CuAAC) employs copper salts and reducing agents (e.g., sodium ascorbate, TBTA ligands). Copper solutions can be harmful—avoid ingestion/inhalation; prevent metal contamination of instruments. Manage waste as heavy-metal containing.
  • Potential sensitization: Aromatic amides/phenols may cause irritation; avoid repeated exposure.

Storage incompatibilities and precautions:

  • Store at −80°C, protected from light (per product data). Keep tightly closed under inert atmosphere or desiccation to limit oxidative degradation.
  • Keep away from strong oxidizers (beyond controlled TSA use), strong bases that may deprotonate phenols, and copper/air combinations that may promote side reactions of the alkyne.

First aid (general):

  • Skin/eye contact: Rinse with water for at least 15 minutes; remove contaminated clothing; seek medical evaluation. Inhalation: Move to fresh air. Ingestion: Rinse mouth; do not induce vomiting; seek medical attention.
Solvent Selection

This reagent is engineered for bioorthogonal labeling and is commonly handled as a concentrated stock in polar aprotic solvents.

General solvent behavior for tyramide-alkyne class (guidance; not item-specific specifications):

  • Primary stock solvents: DMSO (anhydrous) is most common; DMF is an alternative. Both solubilize phenolic amide scaffolds and are compatible with subsequent dilution into aqueous buffers for TSA.
  • Aqueous media: Limited direct solubility before use; working solutions are typically prepared by diluting a DMSO stock into buffer immediately before application. Keep final DMSO ≤1–2% v/v in biological assays to minimize perturbation.
  • CuAAC media: tBuOH/H2O, DMSO/H2O, or pure DMSO are frequently used. Ligands (e.g., TBTA, THPTA) improve copper solubility in aqueous systems.

Selection tips and comparisons:

  • DMSO vs DMF: DMSO offers broader biocompatibility and lower volatility; DMF may be preferred for difficult dissolutions but is less desirable for biological systems.
  • Ethanol/MeOH: Can dissolve many tyramide derivatives but may be less compatible with peroxidase activity at higher percentages.
  • Buffered systems: For TSA, phosphate or Tris buffers with low detergent are commonly used; avoid high concentrations of competing phenols or strong nucleophiles that may quench radicals.

Practical notes:

  • Prepare small aliquots of concentrated stock (e.g., 10–50 mM in anhydrous DMSO) to avoid repeated freeze–thaw cycles. Filter sterilize through PTFE if needed for cell-adjacent applications.
  • Degassing is not usually required, but protecting from light and minimizing prolonged exposure at room temperature helps maintain performance.
Storage and Reconstitution

Item-specific conditions (from Product Data):

  • Storage: Store at −80°C, protected from light.
  • Shipping: Dry ice packs + cold packs.

Not otherwise specified for this item; refer to CoA/Spec Sheet for any stabilizers, container type, and shelf-life.

General guidance for similar reagents (for user convenience; not a specification):

  • Upon receipt: Keep frozen; allow the container to equilibrate to room temperature in a desiccator before opening to avoid condensation.
  • Reconstitution: Prepare a concentrated stock solution in anhydrous DMSO (e.g., 10–50 mM) under low light. If needed, briefly sonicate to aid dissolution. Optionally sparge with inert gas to limit oxidation during preparation.
  • Aliquoting: Dispense into single-use, light-protected micro-aliquots; refreeze immediately at −80°C. Avoid repeated freeze–thaw cycles.
  • Working solutions: Prepare immediately before use by diluting the DMSO stock into the desired buffer. Use within the same day; discard unused dilutions.
  • Light and air: Minimize exposure by wrapping tubes in foil and keeping caps closed. Do not store working solutions for extended periods.

Disposal: Follow institutional guidelines. Waste from CuAAC steps should be collected as heavy-metal–containing chemical waste due to copper content.

Structure and Identity

Item-specific identifiers provided by Aladdin Scientific for SKU T1498107 are limited. Where values are absent, consult the latest CoA/Spec Sheet.

  • Product name: Tyramide alkyne (research reagent)
  • CAS: 2230051-33-7
  • Grade: Moligand™
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • InChIKey: Not specified for this item; refer to CoA/Spec Sheet.

Structural features (general/literature description, not item-specific):

  • Core phenolic ring consistent with tyramide-class substrates (para-hydroxyphenyl motif) capable of peroxidase-mediated one-electron oxidation to a phenoxy radical.
  • Amide linkage (tyramide = phenethyl amide scaffold) providing hydrogen-bonding capability and reduced basicity relative to the parent amine.
  • Terminal alkyne “click handle” suitable for azide–alkyne cycloaddition (CuAAC) to install affinity tags (e.g., azido-biotin) or fluorophores post-deposition.
  • Typical 2D depiction (qualitative): a para-hydroxylated benzene ring connected via –CH2–CH2– to an amide, with a terminal –C≡CH substituent placed on the amide nitrogen side-chain or reporter appendage (exact regiochemistry depends on the specific commercial structure; refer to CoA/Spec Sheet for definitive connectivity).

Stereochemistry: None expected for the core tyramide scaffold; the alkyne handle introduces no stereocenters. Any chiral centers, if present in a specific analog, would be indicated on the CoA.

Synthetic Utility

Although primarily a labeling probe, the functional group combination in a tyramide-alkyne reagent lends it utility as a synthetic intermediate in chemical biology workflows.

Reactive handles (general):

  • Terminal alkyne: Enables azide–alkyne cycloaddition (CuAAC) to install biotin, fluorophores, affinity tags, or isotopic labels. Post-deposition conjugation allows flexible reporter selection without altering deposition chemistry.
  • Phenolic OH: Tunable reactivity under peroxidase catalysis; also amenable to protection (e.g., silyl, benzyl) or further derivatization in synthetic campaigns if needed.
  • Amide: Provides polarity and H-bonding; site for potential further diversification via acyl substitution in upstream synthesis (not typically modified in end-use labeling).

Retrosynthetic value:

  • Decouples targeting and reporting: Enzymatic site-selective deposition places a minimal alkyne handle at proteins. Subsequent CuAAC allows modular late-stage functionalization with a wide menu of azide reagents.

Examples of downstream transformations (literature guidance):

  • CuAAC with azido-PEG-biotin for enrichment on streptavidin resins.
  • CuAAC with azido-fluorophores for microscopy.
  • CuAAC with azido-alkoxyamines or cleavable azides to enable MS-friendly release after enrichment.

Notes:

  • Maintain the alkyne in its terminal form; avoid oxidative homocoupling (Glaser) by limiting Cu/air exposure outside controlled click conditions.
  • For LC-MS applications, use copper-ligand systems that minimize peptide oxidation and thoroughly remove copper post-click.
Target Specificity

Not applicable to this reagent. Tyramide alkyne is a chemical substrate and does not possess inherent biological target specificity like an antibody, ligand-directed inhibitor, or nucleic acid probe. Specificity in applications derives from the localization of the peroxidase catalyst (e.g., HRP-conjugated affinity reagents) used to deposit the tag.

Perguntas frequentes

What is Moligand??
Moligand? is one of Aladdin Scientific's premium product lines, formulated for high-purity applications across multiple workflows. Compared to standard grades in the same workflow, Moligand? products typically offer tighter specifications, more rigorous QC, and stronger lot-to-lot consistency.
How should this product be stored?
Store at ?80 °C, protected from light. The material is light-sensitive — keep it in its original opaque or amber container.
How is this product shipped?
This product ships frozen with dry ice and cold packs. Unpack on arrival and transfer it to the storage condition stated above; handle dry ice with insulated gloves in a ventilated area.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 2230051-33-7, the molecular formula is C14H17NO2, and the molecular weight is 231.29 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Precisa de ajuda para escolher o grau?

O nosso guia de seleção de graus abrange pureza, estado do estabilizador e adequação à aplicação para todas as variantes do nosso catálogo.

Ver o guia de graus Moligand™ →

Deseja que lhe enviemos uma mensagem quando tivermos descontos disponíveis?

Lembrar-me mais tarde

Obrigado! Por favor, verifique a sua caixa de entrada de e-mail para confirmar.

Ops! As notificações estão desativadas.