Esta serie de productos contiene UCNs NaYREF4 (RE:Yb, Er, Tm, Gd, Mn, Lu) aminofuncionalizados con una longitud de onda de excitación óptima de 975 nm. El sensibilizador es Yb3+, y el activador Er3+ o Tm3+. Las nanopartículas son muy hidrófilas debido al recubrimiento de sílice o de PEG. Los UCNs son de alta eficiencia cuántica y muy fotoestables Tras una adecuada modificación y funcionalización de la superficie, los productos pueden utilizarse para la obtención de imágenes fluorescentes, la biodetección, el análisis de la inmunidad y la fotoactivación de fármacos anticancerígenos y biomoléculas.
Especificaciones
Especificaciones y pureza
Em. Longitud de onda:545 nm,Tamaño de partícula:35nm,Recubrimiento:PEG-COOH
Condiciones de almacenamiento de almacenamiento
Room temperature
Enviado en
Normal
Datos avanzados
Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluciones
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reseñas
Reseñas de cliente
Application Protocols
Item-specific (Product Data)
No tested application protocols or validated methods are provided; refer to CoA/Spec Sheet.
General/literature example workflows (not item-specific)
Dispersion and cleaning
Disperse UCNPs in water (pH ~8) by brief bath sonication (1–5 min). Clarify by low-speed spin to remove large aggregates if needed.
EDC/NHS amide coupling to an amine-bearing ligand
Activate in 25 mM MES, pH 5.5 with 5 mM EDC + 10 mM sulfo-NHS for 30 min at RT. Pellet and resuspend in PBS, pH 7.4. Add ligand (e.g., protein at 0.1–1 mg/mL) and react 1 h at RT. Quench with 20 mM Tris. Wash 3× by centrifugation.
Verify conjugation by gel electrophoresis shifts, FTIR/XPS changes, or functional binding assays. Check luminescence under 980 nm excitation.
Printing/coating
Prepare 1–10 mg/mL dispersions in water/ethanol (or polymer binder). Filter through 0.45 μm if recovery allows. Deposit by spin/spray/inkjet; dry at ambient or ≤60 °C. Measure emission maps to confirm uniformity.
Storage of dispersions
Store at RT or 4 °C as appropriate for colloidal stability; include 0.01–0.05% nonionic surfactant if compatible. Avoid freeze–thaw.
Note: All conditions above are illustrative literature practices; optimize for your formulation and instrumentation.
Biological Roles
Item-specific (Product Data)
No biological function is specified. Research Use Only.
General perspective (not item-specific)
UCNPs are not biomolecules and do not have intrinsic biological roles. In research, they serve as photonic labels or transducers. The carboxyl-functionalized surface provides a handle for conjugation to biomolecules (proteins, peptides, nucleic acids) via amide bonding after EDC/NHS activation, enabling targeted binding in vitro.
Interaction with biological systems is dominated by the protein corona and surface chemistry. PEGylation or zwitterionic shells are often implemented to modulate nonspecific adsorption in cell-free assays (literature).
Photophysical advantages in bioassays: NIR excitation minimizes background fluorescence and light scattering, enabling high signal-to-noise detection in complex mixtures; minimal photobleaching compared to organic dyes (literature).
Considerations for in vitro work: Maintain dispersion in physiologic buffers with controlled ionic strength; avoid amine-containing buffers during EDC activation; confirm conjugation and retention of bioactivity of ligands by SDS-PAGE, HPLC, or functional binding assays.
Important note
Any mention of cellular or in vivo behavior would be system-specific and outside the scope of this catalog entry. No clinical or diagnostic use is implied or supported.
Buffer Applications
Carboxyl-functionalized UCNPs are not classical acid–base buffers. However, buffer choice is critical for dispersing them and performing surface coupling reactions.
Item-specific (Product Data)
No buffer recommendations specified; refer to CoA/Spec Sheet.
General/literature guidance (not item-specific)
Dispersion buffers: For colloidal stability, use low–moderate ionic strength buffers at pH 7.2–8.5 (e.g., 10–20 mM HEPES, 1× PBS with caution on ionic strength). Divalent cations (Ca2+, Mg2+) can promote bridging/flocculation—minimize during preparation.
EDC/NHS coupling buffers:
Activation: MES, acetate, or phosphate buffers at pH 5.0–6.0 (amine-free).
Coupling: Phosphate or HEPES at pH 7.2–7.5 (avoid primary amine buffers like Tris during activation/coupling to prevent side reactions).
Storage buffers: Neutral pH with small amounts of nonionic surfactant (e.g., 0.01–0.05% Tween-20) or PEG additives can mitigate aggregation; validate for your assay (literature).
Filtration: Use low protein-binding membranes (0.22–0.45 μm) cautiously; nanoparticles may be retained depending on size/surface chemistry—test recovery.
Practical notes
Always match buffer refractive index and viscosity to optical readouts when performing quantitative luminescence measurements.
Remove excess EDC/NHS and byproducts via centrifugal washing to avoid interference in downstream assays.
Green Alternatives
Context
UCNPs are inorganic, non-volatile materials; “green” considerations focus on solvent choice, process energy, and lifecycle impacts of rare-earth sourcing.
Greener practice options (general/literature; not item-specific)
Aqueous processing: Prefer water or water/ethanol mixtures for dispersions, bioconjugation, and printing where feasible. Avoid chlorinated or high-toxicity polar aprotics when not necessary.
Energy efficiency: Upconversion allows NIR excitation with low-power diodes; choose efficient optics to minimize illumination energy.
Waste minimization: Recycle supernatants, use centrifugal filtration rather than solvent-intensive dialysis when appropriate, and consolidate nanoparticle waste streams for proper disposal.
Safer coupling chemistries: Carbodiimide (EDC/NHS) in buffered water reduces reliance on organic solvents; consider enzymatic or photoclick alternatives when compatible.
Tradeoffs (balanced view)
Aqueous systems improve EHS profile but may narrow the stability window and increase aggregation risk; judicious use of benign stabilizers (e.g., PAA, PEG) can help.
Rare-earth mining has environmental externalities; extending particle lifetime via robust shells and recycling of off-spec material reduces footprint (literature).
Quick comparison (literature)
Water/ethanol: Low toxicity, easy cleanup; may require pH/ionic strength control.
DMSO/DMF: Powerful dispersants for some ligands/polymers but higher EHS concerns; restrict to necessary steps.
Supercritical CO2 or solventless printing: Niche methods for coatings; may reduce VOCs but require specialized equipment.
Pharmaceutical Uses
This product is for research use only. No medical, diagnostic, or therapeutic use is claimed.
Item-specific (Product Data)
No pharmacopeial status or excipient role specified; refer to CoA/Spec Sheet.
General/literature context (not item-specific)
UCNPs have been explored in academic settings as optical reporters and for light-mediated processes, but such investigations are pre-commercial and outside regulated pharmaceutical applications.
In formulation science research, carboxyl-functionalized nanoparticles can serve as model colloids to study surface coupling, mucoadhesion, or ligand-density effects, but they are not established pharmaceutical excipients.
If using in device prototyping or packaging markers (e.g., anti-counterfeiting inks on labels), ensure materials compatibility and regulatory separation from drug-contact components.
Physical Properties
Item-specific (Product Data)
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Particle size, phase, dopant levels, zeta potential, carboxyl density: Not specified for this item; refer to CoA/Spec Sheet.
Bulk properties such as melting/boiling point, refractive index: Not applicable for discrete nanoparticles; not specified for this item; refer to CoA/Spec Sheet.
General/literature values and considerations (not item-specific)
Particle size: Common diameter ranges 10–80 nm (TEM), with hydrodynamic diameters larger when coated with polymers or proteins (literature).
Zeta potential: Surface –COOH tends to yield negative zeta potential in water at neutral–basic pH (e.g., −15 to −40 mV), shifting toward neutrality upon EDC/NHS activation (literature).
Solubility/dispersion: Insoluble as a solid; forms colloidal dispersions. Dispersible in water and polar buffers when deprotonated (pH ≥ 7). In low-polarity solvents, dispersibility may require amphiphiles or phase-transfer ligands (literature).
Photophysical properties: Anti-Stokes emission under 808/980 nm excitation; emission bands depend on activator (e.g., Er3+ green/red, Tm3+ blue/UV, Ho3+ green). Absolute quantum yields vary widely with size, phase, dopant, and shell design (literature).
Thermal/photostability: Inorganic cores are photostable and thermally robust; surface ligands may determine colloidal stability window (literature).
Quality and Grades
Item-specific (Product Data)
Grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
How quality is typically defined for carboxyl-functionalized UCNPs (general guidance)
Structural quality: Crystal phase (β vs α), size distribution (TEM, DLS), faceting, and defect density influence emission efficiency.
Composition control: Dopant identity and at.% (e.g., Yb/Er/Tm/Ho) verified by ICP-OES/ICP-MS or EDS; homogeneous distribution improves performance.
Surface chemistry: Confirmation of –COOH by FTIR (C=O stretch ~1700 cm−1/COO− ~1550–1400 cm−1), XPS (C 1s/O 1s), TGA for ligand loading, and zeta potential vs pH (titration).
Colloidal performance: Dispersibility, absence of large aggregates (DLS/PDI), and stability windows across pH/ionic strength. Endotoxin/bioburden may be characterized when intended for sensitive bioassays (research-only, not for clinical use).
Optical benchmarks: Upconversion emission spectra under defined NIR excitation, relative intensity ratios (e.g., 540/660 nm for Er3+), and photostability under continuous irradiation (literature).
Practical note
For batch-to-batch consistency, users typically consult a CoA listing particle size (TEM), hydrodynamic size (DLS), zeta potential, ligand coverage, and core composition. In absence of item-specific values here, request the CoA/Spec Sheet to align your QC with application requirements.
Reaction and Applications
Item-specific (Product Data)
Manufacturer applications: Not specified beyond product name; refer to CoA/Spec Sheet.
Optical probes and labels: UCNPs convert 808/980 nm excitation into visible/UV emission, enabling low-background luminescence readouts in complex media due to minimal autofluorescence under NIR excitation.
Sensing platforms: Surface –COOH allows covalent immobilization of receptors (antibodies, peptides, aptamers) via amide coupling, supporting assays for nucleic acids, ions, and small molecules.
Anti-counterfeiting and security inks: NIR-to-visible upconversion for covert tags and multi-wavelength encoding in printed patterns.
Photonics and energy: Light management in photovoltaics, optical thermometry, and waveguide-coupled devices.
Microscope calibration and imaging phantoms: Stable point emitters for instrument alignment and resolution testing.
Chemistry of use
Carboxyl surfaces are amenable to EDC/NHS activation for coupling to primary amines on biomolecules or polymers; click handles can be introduced via amide linkers.
The inorganic core is chemically inert to most reaction conditions used for organic coupling; preserve colloidal stability by maintaining appropriate pH/ionic strength and avoiding surfactant stripping unless intentional.
Practical tips
Degas aqueous dispersions for sensitive optical measurements to minimize oxygen-related quenching of surface states (context- and system-dependent).
Employ core–shell UCNPs (if available) for brighter signals and greater resistance to surface quenching when heavy surface functionalization is planned (literature guidance).
Reaction Conditions
Below are general, literature-based conditions for common surface coupling steps on carboxyl-functionalized UCNPs. These are not item-specific specifications; optimize for your system.
EDC/NHS-mediated amide coupling (literature)
Activation: Disperse UCNPs (0.1–2 mg/mL) in MES buffer (10–50 mM, pH 5.0–6.0). Add EDC (1–10 mM) and NHS or sulfo-NHS (2–20 mM). Incubate 15–45 min at RT with gentle mixing.
Coupling: Exchange into phosphate or HEPES buffer (pH 7.2–7.5). Add amine-bearing ligand (10–100× molar excess vs. estimated surface –COOH). React 1–2 h at RT (or 4 °C overnight). Quench residual esters with Tris or ethanolamine after coupling.
Purification: Centrifugation (typical 8,000–20,000 g depending on size) or size-exclusion chromatography; verify retention of dispersibility and photoluminescence.
Noncovalent adsorption (literature)
Polymers/proteins can adsorb electrostatically at pH above their pI for cationic species; screen ionic strength to avoid bridging flocculation.
Coating and encapsulation (literature)
Silanization: In ethanol/water with APTES/MPTES under mildly basic conditions (pH 9–10, ammonia as catalyst), followed by carboxyl-bearing silanes or succinylation to reintroduce –COOH.
Polymer grafting: Couple RAFT/ATRP initiators, then polymerize under controlled radical conditions in water/ethanol at RT–50 °C.
Expected outcomes
Efficient coupling yields stable, functionalized colloids retaining characteristic upconversion spectra; excessive crosslinking, high salt, or extreme pH can reduce brightness or induce aggregation.
Safety and Handling
Item-specific (Product Data)
GHS classification, signal word, pictograms, hazard statements: Not specified for this item; refer to SDS.
Storage conditions: Room temperature.
Shipped: Normal.
General safety guidance for UCNP powders/dispersion concentrates (not item-specific; consult SDS for authoritative instructions)
Primary hazards: Nuisance dust/particulate inhalation if dry; potential respiratory/eye irritation. Suspensions may contain dispersants—review their hazards. Rare-earth salts/fluorides in bulk can be irritants; nanoparticulate forms warrant prudent handling (literature).
PPE: Laboratory coat, safety glasses, and suitable gloves (e.g., nitrile). Use a fume hood or ventilated enclosure to minimize aerosolization, especially with dry powders.
Incompatibilities: Strong acids/bases can modify surface ligands and colloidal stability; fluoride-containing cores are stable but avoid hot, concentrated acids that could release HF upon dissolution. Avoid oxidative degradation of organic ligands.
First aid overview: If inhaled—move to fresh air; if on skin—wash with soap/water; if in eyes—rinse cautiously with water; if ingested—rinse mouth and seek medical advice. Always follow SDS.
Environmental considerations: Prevent uncontrolled release to drains; collect nanoparticle waste in labeled containers per institutional nanomaterial disposal procedures (literature).
Special risks: Nanoparticles can translocate in air as fine particulates; minimize dust, keep containers closed, consider wet handling to reduce airborne exposure.
Solvent Selection
These nanoparticles are solids that form colloidal dispersions rather than true solutions. Solvent choice governs charge state of –COOH groups and colloidal stability.
Item-specific (Product Data)
No dispersion solvent specified; refer to CoA/Spec Sheet.
General/literature guidance (not item-specific)
Aqueous systems: At pH ≥ 7, –COOH deprotonates (–COO−), improving electrostatic stabilization in water, PBS (low to moderate ionic strength), or HEPES buffers. High ionic strength or divalent cations can screen charges and induce aggregation—optimize salt concentration.
Organic polar solvents: DMF, DMSO, ethanol can disperse carboxylated UCNPs if aided by hydrogen bonding or with amphiphilic co-ligands. Long-term stability may be lower than in water with appropriate pH control.
Nonpolar solvents: Typically poor for –COOH-terminated surfaces; phase transfer (e.g., with amphiphiles or ligand exchange to oleates) is often required.
pH window: Carboxylate surfaces are least stable near pH ~2–4 (protonation reduces charge) and most stable near pH 7.4–9, balancing deprotonation with biocompatibility (literature).
Practical selection tips
For bioconjugation via EDC/NHS, use non-amine buffers (MES, PBS without Tris) at pH 5.0–6.0 (activation) and pH 7.2–7.5 (coupling).
For spectroscopy/printing, low-scatter solvents (water, ethanol) minimize background; viscosity of glycerol/water blends can reduce sedimentation.
Small comparison (literature)
Water (pH-adjusted): Best for charge-stabilized dispersions; low toxicity. Ethanol: Faster drying for coatings. DMSO/DMF: Useful for polymer processing but may quench surface states if coordinating strongly.
Storage and Reconstitution
Item-specific (Product Data)
Storage conditions: Room temperature.
Shipped in: Normal.
General guidance (not item-specific)
Dry material: Keep tightly closed in a clean, inert container at room temperature, protected from excessive humidity and direct light to preserve surface ligands. Minimize static and dust generation when handling.
Dispersions: For short- to medium-term storage, maintain at RT or 4 °C depending on colloidal stability tests. Avoid repeated freeze–thaw; if freezing is required, consider cryoprotectants (e.g., 10–20% glycerol) and validate effects on optical properties.
Reconstitution to dispersion
Solvent: Use ultrapure water or buffer adjusted to pH 7.4–8.0 to deprotonate –COOH groups for electrostatic stabilization. Start at 0.1–5 mg/mL.
Method: Add solvent to the powder (not vice versa) to reduce dusting. Gently vortex and apply brief bath sonication (1–5 min). If needed, perform low-speed centrifugation to remove aggregates.
Optional additives: 0.01–0.05% nonionic surfactant (Tween-20, Pluronic) or low-MW PEG can reduce aggregation; confirm compatibility with downstream chemistry.
Shelf-life and QC: Periodically check hydrodynamic size (DLS), zeta potential, and emission intensity under NIR excitation to monitor stability. If aggregation is observed, adjust pH/ionic strength and re-disperse by mild sonication.
Always refer to the product’s CoA/Spec Sheet and SDS for item-specific instructions.
Structure and Identity
Brief overview: Carboxyl-functionalized upconverting nanoparticles (UCNPs) are inorganic nanocrystals (commonly rare-earth fluoride hosts) whose surfaces are terminated with –COOH groups for dispersibility and bioconjugation.
Item-specific (Product Data)
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
CAS, InChIKey, SMILES: Not applicable/Not specified; UCNPs are heterogeneous inorganic nanoparticles and generally lack single-molecule identifiers.
Typical core: Rare-earth fluoride host lattices such as NaREF4 (RE = Y, Gd) doped with sensitizer/activator ions (e.g., Yb3+, Er3+, Tm3+, Ho3+) that upconvert NIR photons to visible/UV emission under 808–980 nm excitation.
Surface chemistry: Carboxylation via ligand exchange (e.g., polyacrylic acid, citric acid) or polymer/silica shells bearing terminal –COOH. The –COOH groups enable amide coupling to primary amines.
Structural features: Crystalline nanospheres or rods; hexagonal (β) or cubic (α) phases are common. A core–shell architecture (e.g., inert shell to suppress surface quenching) is often used in advanced UCNPs (literature).
2D structural description: Inorganic crystalline lattice (ionic solid) with a surface corona of carboxylate-bearing ligands; no discrete small-molecule structure.
Notes for identification
Identity is typically established by powder XRD (phase), TEM/SEM (size/shape), EDS/ICP-MS (composition/dopants), FTIR/XPS (surface –COOH), and photoluminescence spectra under NIR excitation (literature).
Synthetic Utility
While not reagents in classical organic synthesis, carboxyl-functionalized UCNPs are versatile nano-building blocks for assembling functional materials and bioconjugates.
Functional group handle
Terminal –COOH enables covalent linkage to primary amines (proteins, peptides, polymers, surfaces) via carbodiimide chemistry to form amide bonds. Multi-point attachment permits grafting of polymers (PEG, PNIPAM) to tailor colloidal and interfacial properties.
Platform for further derivatization (literature)
Convert –COOH to NHS esters in situ (EDC/NHS) for mild subsequent coupling.
Introduce orthogonal click handles: Couple amine-azides/alkynes to enable CuAAC or strain-promoted cycloadditions; thiol-reactive linkers (maleimides) can be installed via amide spacers.
Layer-by-layer assembly: Electrostatic deposition of polyelectrolytes (e.g., PAH/PAA) to build shells controlling permeability and charge.
Surface-initiated polymerization: Attach RAFT/ATRP initiators via amide bonds to grow brushes from the surface.
Integration into devices
Embed in polymer films, sol–gel/silica matrices, or photonic structures to create stable upconverting coatings and micro-patterns. The robust inorganic core tolerates moderate curing/processing conditions better than many organic fluorophores.
Retrosynthetic value
Treat the UCNP as a luminescent, nanoscale carboxylic acid synthon: plan sequences that first stabilize colloids (shells/ligands), then introduce functional ligands, and finally assemble with targets under conditions preserving upconversion efficiency.
Target Specificity
Not applicable. This product is a nanomaterial, not an antibody or affinity reagent. No clone, isotype, antigen, or species reactivity information is provided for this item. For selective binding, users typically install target-specific ligands (e.g., antibodies, peptides, aptamers) onto the –COOH surface via covalent coupling (see Synthetic Utility and Reaction Conditions).
Utilizamos cookies para garantizar el correcto funcionamiento del sitio web y, cuando esté permitido, para mejorar su experiencia. Puede gestionar sus preferencias en cualquier momento en Configuración. Más información en nuestra Política de Cookies.
¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?
Recordármelo más tarde
¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.