DQP-26 is a potent NMDAR negative allosteric modulator with IC 50 values of 0.77 μM and 0.44 μM for GluN2C and GluN2D, respectively. DQP-26 has the potential for NMDAR-associated neurological disease research.
Especificaciones
Condiciones de almacenamiento de almacenamiento
Store at -20°C
Enviado en
Ice chest + Ice pads
Este producto requiere envío en cadena de frío. Los servicios terrestres y otros servicios económicos no están disponibles.
Tipo de acción
MODULATOR
Nombres e identificadores
Peso molecular
534.39
Datos avanzados
Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluciones
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reseñas
Reseñas de cliente
Application Protocols
No validated application protocols are provided for this product.
Item-specific facts:
None on assay formats, dilutions, or controls.
General example workflow for small-molecule screening (guidance only):
Prepare a 10–50 mM DMSO stock; verify complete dissolution by visual inspection and, if needed, UV/LC–MS.
Dilute into assay buffer to achieve desired test concentrations while keeping final DMSO ≤0.5% v/v (or per assay tolerance).
Include vehicle controls and, when available, positive/negative reference compounds.
Run a concentration–response (e.g., 10-point, half-log) to determine potency metrics.
Confirm hits with orthogonal readouts and counter-screens to mitigate artifacts.
This guidance is general and not specific to DQP-26.
Biological Roles
No biological function, pathway, or target information was provided for DQP-26 in the Product Data.
Item-specific facts:
None supplied regarding mechanism of action, target class, or biochemical role.
General guidance for users of screening compounds:
If DQP-26 is to be employed as a probe candidate, establish baseline physicochemical and ADME-relevant properties (solubility, stability in assay buffer, permeability) and confirm activity using orthogonal readouts to avoid assay interference.
Avoid assigning biological roles without validated data. Use concentration–response studies, inactive analog controls, and counter-screens to distinguish on-target effects from off-target or assay artifact.
For omics or phenotypic profiling, accompany treatments with vehicle controls and exposure verification (LC–MS of media/cell lysate) to confirm dosing.
These statements are general best practices and do not imply any specific biological role for DQP-26.
Buffer Applications
This product is not a buffering reagent, and no buffer system usage is indicated in the Product Data.
Practical note:
When preparing assay solutions, dissolve in a suitable solvent (often DMSO) and dilute into your chosen buffer while maintaining a consistent final co-solvent percentage across controls and test conditions to avoid pH or solvent artifacts.
Buffer recipes and pH ranges are not applicable to this item without known acid/base functionality. Refer to your assay’s validated buffer system.
Green Alternatives
In the absence of structure-specific hazards and solvent needs, greener choices focus on solvent selection for dissolution, handling, and assay workflows.
Greener solvent considerations (general):
Prefer water or buffered aqueous media where solubility allows.
Among organic solvents, consider biobased or lower-toxicity options when compatible with the compound and assay: Cyrene (dihydrolevoglucosenone), 2-MeTHF, ethanol, and propylene carbonate.
Comparison (general guidance, not item-specific):
DMSO vs Cyrene: DMSO is broadly miscible and assay-friendly but has high persistence; Cyrene is a greener alternative with good solvating power, though compatibility and background signals must be validated per assay.
MeCN vs EtOH: Acetonitrile offers strong elution power in analytics but is less green than ethanol; where feasible, replace or reduce MeCN content.
Operational greening:
Minimize stock concentration beyond solubility need to reduce solvent mass.
Employ microscale assays to cut waste.
Consolidate shipments to reduce cold-chain footprint.
Always confirm compound stability and assay performance when changing solvents; these notes are general and not specifications for DQP-26.
Pharmaceutical Uses
No pharmacopeial status, excipient role, or formulation use is specified for this item.
Item-specific facts (from Product Data):
Research Use Note: For research use only.
General context (non-clinical):
Small-molecule library members like DQP-26 may be used in early discovery research as reference or screening compounds. They are not approved as drug substances or excipients.
If used in pre-formulation research, document salt form, polymorph, and solvates where applicable; however, these details are not provided here and must be confirmed via CoA/Spec Sheet.
No clinical or therapeutic claims are made or implied.
Physical Properties
Summary: Critical physicochemical data were not provided for this catalog entry. Where numerical values are essential for your work, please refer to the CoA/Spec Sheet or request additional documentation.
Item-specific facts (from Product Data):
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
No literature values can be asserted without a confirmed structure. Boiling point, melting point, density, logP, pKa, solubility, and refractive index are therefore not listed here.
Practical notes (general chemistry guidance):
Many small-molecule screening compounds are solids with limited aqueous solubility and are commonly prepared as concentrated DMSO stocks (e.g., 10–50 mM) for biological assays. This is a general practice note, not a specification for DQP-26.
If hygroscopicity or light sensitivity is a concern, use desiccation and light protection during handling; confirm needs via SDS/CoA.
Quality and Grades
Item-specific facts (from Product Data):
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Interpreting grades (general guidance):
Research-grade screening compounds are typically provided with identity confirmation (e.g., NMR, MS, HPLC/LC–MS chromatogram). When a specific purity (e.g., ≥95% by HPLC) is required, confirm on the CoA for your lot.
Absence of specified stabilizers implies none are declared; however, do not assume—verify on the CoA/SDS if stabilizers, counterions, or residual solvents are present.
Documentation you can expect on request:
Analytical data package (e.g., 1H NMR, LC–MS, HPLC purity), lot-specific CoA, and, when applicable, water/residual solvent content. If your application is sensitive (e.g., SAR, cell assays), request the most recent CoA for SKU D1437170.
Fit-for-purpose notes:
For biochemical screening, low nonvolatile impurities and defined salt/counterion forms are recommended. Confirm exact form (free base/acid, salt, solvate) on the CoA.
For analytical applications (e.g., reference material), ensure the purity specification and identity methods meet your method validation criteria.
Reaction and Applications
Item-specific facts (from Product Data):
Manufacturer application notes: Not provided for this item.
General research application contexts for small-molecule library entries:
Chemical biology: Use as a candidate modulator in enzyme or receptor assays; confirm identity and purity before SAR comparisons.
Phenotypic screening: Evaluate activity across cell-based assays; track lot numbers and solvent carryover to ensure reproducibility.
Target deconvolution workflows: If activity is observed, support with orthogonal assays and chemoproteomics as appropriate.
Practical considerations (general):
Stock preparation: Typical 10–50 mM DMSO stocks; maintain consistent DMSO percentage across controls and test wells.
Adsorption/aggregation checks: Include detergent or use dynamic light scattering where aggregation-driven artifacts are suspected; employ counterscreens for PAINS-like behavior if structural alerts arise (requires structure confirmation).
Stability: Assess freeze–thaw robustness and solution stability (time, temperature, light) by LC–MS/HPLC.
Note: Without a disclosed structure or functional class, no specific synthetic or mechanistic reaction roles can be recommended for DQP-26.
Reaction Conditions
No reaction condition guidance can be provided for DQP-26 without knowledge of its functional groups or reactivity profile.
Item-specific facts:
None on reaction compatibility, catalysts, or temperature limits.
General best practices:
If using DQP-26 in solution-phase studies (e.g., stability tests), start with mild conditions (ambient temperature, neutral pH) and expand scope based on analytical outcomes.
For any derivatization, consult structural data first, then reference literature for similar scaffolds to select catalysts/solvents/temperatures. Document yields and conditions carefully for reproducibility.
All numerical conditions and yields must be developed empirically for this compound once structural information is available.
Safety and Handling
Safety data specific to this item were not supplied in the Product Data. Always consult the SDS for authoritative guidance before use.
Item-specific facts (from Product Data):
Storage: Store at −20°C
Shipped on cold packs (ice chest + ice pads)
GHS classification, signal word, pictograms, and H-statements: Not specified for this item; refer to SDS.
General laboratory precautions (professional guidance):
PPE: Wear lab coat, nitrile gloves, and safety glasses as a baseline. Escalate PPE (e.g., splash goggles, double-gloving) if solvent use or splash risk is present.
Engineering controls: Handle powders and solvents in a chemical fume hood; avoid inhalation of dust or vapors.
Incompatibilities: Unknown for this specific compound; as a conservative approach, avoid strong oxidizers, strong acids/bases, and reducing agents until compatibility is confirmed in the SDS.
First aid (general): If on skin/eyes, rinse with water for at least 15 minutes; if inhaled, move to fresh air; if ingested, seek medical advice. Provide SDS to medical personnel.
Spill/cleanup: Avoid dust generation; use inert absorbent for liquids; collect waste in labeled containers for disposal according to local regulations.
Waste disposal: Treat as chemical waste. Follow institutional and regulatory requirements; reference SDS for specific disposal codes.
Solvent Selection
Because no structure or solubility data were provided, solvent choice should be established empirically and documented for your workflow.
Item-specific facts (from Product Data):
None regarding solubility or solvent compatibility.
General strategy for small-molecule library members:
Primary screening stock: DMSO is the typical first-choice solvent due to broad solubilizing power and assay compatibility at ≤0.5% v/v final.
Secondary options: DMF, acetonitrile, ethanol, methanol—evaluate based on assay tolerance and compound stability.
Aqueous solubilization: Use co-solvent dilution (e.g., DMSO stock into buffered saline) or add minimal surfactant (e.g., 0.01–0.05% Tween-20) if assay-compatible.
pH-assisted dissolution: For ionizable compounds, adjust medium pH to favor the ionized state; only apply after confirming pKa and stability.
Practical tips:
Prepare a small solvent screen (DMSO, MeOH, ACN, EtOH, buffer) at target concentrations (e.g., 1–10 mg/mL) to identify a clear, stable solution.
Filter sterilization (0.22 µm PTFE) when sterile solutions are required and solvent-compatible.
Record precipitation limits upon aqueous dilution to set maximum working concentrations.
Storage and Reconstitution
Item-specific facts (from Product Data):
Storage: Store at −20°C
Shipping: Ice chest + ice pads
General storage guidance (non-item-specific; verify with SDS/CoA):
Keep container tightly closed under dry, inert atmosphere if feasible. Protect from prolonged light exposure until light stability is known.
Minimize freeze–thaw by aliquoting upon receipt. Record lot number and date of first opening.
Reconstitution (general best practices for small molecules):
Solvents: DMSO is commonly used to prepare concentrated stocks (e.g., 10–50 mM). If water solubility is expected, test buffered aqueous media as well.
Procedure:
Allow vial to equilibrate to room temperature in a desiccator to prevent condensation.
Add pre-warmed solvent incrementally with gentle vortex/sonication until fully dissolved.
Pass through a 0.22 µm PTFE filter if a particle-free solution is required and solvent-compatible.
Aliquot stocks and store at −20°C or per your validated stability study.
Stability checks: Confirm solution stability over intended use period by LC–MS/HPLC; discard if precipitation, color change, or degradation is observed.
Note: Where precise solubility, hygroscopicity, or light-sensitivity data are critical, obtain the lot-specific CoA/Spec Sheet.
Structure and Identity
Brief overview: DQP-26 is listed as a small-molecule library member; detailed structural identifiers were not supplied in the Product Data.
Item-specific facts (from Product Data):
SKU: D1437170
Product name: DQP-26
CAS: 1449373-99-2
Storage: Store at −20°C
Shipping: Ice chest + ice pads
Research Use: For research use only
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
Structural features (general note):
Structural class and functional groups cannot be described without a SMILES/InChI or structure depiction. Please consult the CoA/Spec Sheet or SDS for the definitive identity data.
2D structure description:
Not available in the provided Product Data. If you require a structure file (SDF/MOL), contact Aladdin Scientific technical support with SKU D1437170.
Synthetic Utility
Without a disclosed structure or functional groups, specific synthetic roles cannot be assigned to DQP-26.
Item-specific facts:
None on reactivity, protecting-group compatibility, or functional handles.
General considerations for unnamed small molecules:
If DQP-26 were to be used as a building block, verify presence of reactive handles (e.g., halides, boronates, amines, acids) by reviewing the structure on the CoA/SDS before planning couplings (Suzuki, Buchwald–Hartwig, amide formation, etc.).
Confirm chemical stability under planned conditions (base/acid, redox, temperature) via small-scale scouting and analytical monitoring (TLC, HPLC, LC–MS).
Please request structural data to assess any synthetic utility with confidence.
Target Specificity
No target, binding partner, or selectivity profile is supplied for DQP-26.
Item-specific facts (from Product Data):
None provided on target class, species reactivity, or binding constants.
If you have internal data on DQP-26’s target, consider including KD/IC50/EC50 values with assay conditions (buffer, temperature, co-solvent) for rigorous comparison; otherwise, treat as an uncharacterized screening compound.
Preguntas frecuentes
How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 1449373-99-2, the molecular formula is C28H21Cl2N3O4, and the molecular weight is 534.39 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Utilizamos cookies para garantizar el correcto funcionamiento del sitio web y, cuando esté permitido, para mejorar su experiencia. Puede gestionar sus preferencias en cualquier momento en Configuración. Más información en nuestra Política de Cookies.
¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?
Recordármelo más tarde
¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.