LightOx™19 - ≥95%(HPLC) , CAS No.2324152-25-0

CAS: 2324152-25-0 Cat. No.: L463703 Peso molecular: 345.43
Disponible para pedir
CALIDAD & PUREZA ≥95%(HPLC)
Storage
Store at 2-8°C
Shipped In
Wet ice
★
Talla
USA
Alemania (EU)*
Precio
Cantidad
1EA
L463703-1EA
Fabricado bajo pedido · 8–12 semanas

345,90US$

403,90US$
Guardar 58,00 US$ (14.36%)
Enter a quantity for the sizes you want to add.

Descripción general

Description

Fluorescence microscopy, fluorescent retinoid binding assay, fluorescence spectroscopy.

Especificaciones

Especificaciones y pureza
≥95%(HPLC)
Información jurídica
Condiciones de almacenamiento de almacenamiento
Store at 2-8°C
Enviado en
Wet ice
Este producto requiere envío en cadena de frío. Los servicios terrestres y otros servicios económicos no están disponibles.
Tipo de acción
AGONIST
Pureza
≥95%(HPLC)
Nombres e identificadores
Peso molecular
345.43

Datos avanzados

Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Propiedades químicas y físicas
Punto de inflamación (°F)Not applicable
Punto de inflamación (°C)Not applicable
Calculadoras de soluciones
Reseñas

Reseñas de cliente

Application Protocols

No validated, item-specific protocols, concentrations, or instrument settings are provided in the current listing.

General framework for evaluating a fluorescent probe (literature/general knowledge; not specific to this item):

  • Stock solution: Prepare a concentrated stock (e.g., in DMSO) under low light; aliquot into amber vials to avoid repeated freeze–thaw. Record exact concentration by weight or UV–Vis if ε is known.
  • Assay setup: Define solvent percentage, incubation time, and temperature for your model system. Include appropriate controls (no-dye, solvent-matched, illumination-only).
  • Spectral validation: Measure excitation/emission spectra in the intended buffer/media to confirm compatibility with available filters/lasers and to set detector gain.
  • Titration: Establish a response curve over the intended concentration range. Monitor for precipitation, aggregation, or cytotoxicity (if using cells) and adjust solvent percentage accordingly.
  • Imaging/measurement: Minimize exposure time and illumination intensity to reduce photobleaching; apply antifade strategies where compatible. Document acquisition parameters for reproducibility.

Item-specific recommended dilutions, incubation times, and positive controls: Not specified for this item; refer to CoA/Spec Sheet.

Biological Roles

Item-specific biological roles or targets are not provided. As a branded research reagent, LightOx™19 should be regarded as a synthetic probe without intrinsic physiological function unless otherwise documented.

General context (literature/general knowledge; not item-specific):

  • Small-molecule fluorophores and photoactive probes are widely used as reporters of localization, microenvironment, or dynamic processes in biochemical and cell-based studies. They themselves do not constitute endogenous metabolites or signaling molecules.
  • If a probe includes organelle-targeting motifs (e.g., cationic/aromatic systems for mitochondria), selectivity arises from physicochemical partitioning rather than a defined biological “role.” Such features for LightOx™19 are not specified here.
  • The interaction of dyes with biomacromolecules (proteins, nucleic acids, membranes) can modulate brightness, lifetime, and photostability. Empirical characterization (spectra, brightness, toxicity in the relevant model) is recommended before experimental use.

Research Use Note: For research use only (per Product Data). Not for diagnostic or therapeutic applications.

Buffer Applications

Item-specific buffer compatibility and working concentrations are not provided in the listing. The following are general practices for fluorescent probes (verify for LightOx™19 experimentally and against the CoA/tech sheet):

  • Stock preparation: Prepare a concentrated stock in DMSO or MeCN under reduced light. Filter through 0.2 µm PTFE if particulates are present. Record stock concentration gravimetrically or by UV–Vis using an extinction coefficient if provided.
  • Working solutions: Dilute into the assay buffer immediately before use. Common biological buffers include PBS, HBSS, HEPES-buffered saline, or culture media. Keep final organic co-solvent ≤0.1–1% v/v as allowed by the system.
  • pH and ionic strength: Fluorophore spectra can be pH-sensitive. Validate signal stability across the intended pH and salt conditions. Avoid buffers that absorb/fluoresce strongly near the probe’s bands.
  • Additives: For hydrophobic dyes, small amounts of non-ionic surfactants (e.g., 0.01–0.05% Pluronic F-127) can mitigate aggregation and surface adsorption. Include BSA (e.g., 0.1–0.5%) if nonspecific binding to plastics is observed, ensuring no spectral interference.
  • Light management: Protect solutions from ambient light; use amber tubes and foil-wrapped flasks. Minimize repeated freeze–thaw of aliquots.

Item-specific parameters such as extinction coefficient, recommended buffer, and optimal pH: Not specified for this item; refer to CoA/Spec Sheet.

Green Alternatives

Greener considerations for handling optical probes center on solvent selection, waste minimization, and energy-efficient illumination. Because item-specific properties for LightOx™19 are not provided, the following are general recommendations (literature/general knowledge):

Solvent and formulation choices:

  • Prefer water-based buffers when feasible. If a co-solvent is needed, use lower-toxicity options and minimal volumes.

Comparison of common solvent choices (general):

  • DMSO: good solvency; relatively low vapor pressure; acceptable EHS profile at small percentages; challenge: difficult wastewater treatment.
  • Ethanol/IPA: renewable feedstocks available; higher allowable exposure limits; may suffice for moderately polar dyes; challenge: sometimes insufficient solvency, may perturb bioassays.
  • MeCN/DMF: strong solvency but greater EHS concerns; consider reducing or replacing with aqueous + surfactant systems when compatible.

Operational strategies:

  • Use microvolume stock solutions and on-demand dilution to reduce expired waste.
  • Employ amber vials and low-energy LEDs matched to the dye’s absorption (when photostimulation is required) to reduce heat load and extend sample life.
  • Consolidate waste streams (halogen-free organic vs aqueous) to facilitate compliant disposal.

Note: Selection of a “green” alternative must be validated against LightOx™19’s actual solubility and optical performance; consult the CoA/technical note before changing solvent systems.

Pharmaceutical Uses

No pharmacopeial status or excipient role is provided for this product. This reagent is designated For research use only and is not intended for human or veterinary use, drug substance, or excipient applications.

General context (not specific to this item):

  • Fluorescent dyes may be used in pharmaceutical R&D as analytical reagents for imaging, mechanism-of-action studies, high-content screening, or as in-process indicators in development laboratories. Transition to GMP environments requires additional controls (identity, purity, residual solvents, bioburden/endotoxin for biologically used reagents) that are beyond typical research-grade specifications.
  • If a dye were to be incorporated into a device or diagnostic, extensive validation and regulatory filings would be necessary. No such claims are made for LightOx™19 in this listing.

Item-specific pharmacopeial/quality listings (USP/EP/JP), residual limits, or extractables/leachables data: Not specified for this item; refer to CoA/Spec Sheet.

Physical Properties

Item-specific physicochemical data are not provided in the current listing. Use the supplier CoA/Spec Sheet for authoritative specifications.

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Melting point: Not specified for this item; refer to CoA/Spec Sheet.
  • Boiling point: Not specified for this item; refer to CoA/Spec Sheet.
  • Density: Not specified for this item; refer to CoA/Spec Sheet.
  • Solubility: Not specified for this item; refer to CoA/Spec Sheet.
  • LogP/logD: Not specified for this item; refer to CoA/Spec Sheet.
  • pKa: Not specified for this item; refer to CoA/Spec Sheet.
  • Refractive index: Not applicable/unknown for solids; Not specified for this item; refer to CoA/Spec Sheet.
  • UV–Vis/fluorescence: Not specified for this item; refer to CoA/Spec Sheet.

General considerations (literature/general knowledge, not specific to this item):

  • Small-molecule fluorescent probes often show strong absorption bands in the visible range (400–600 nm) with solvent- and environment-dependent emission. Many are sparingly soluble in water but dissolve readily in polar aprotic solvents (e.g., DMSO, DMF, acetonitrile) and can be formulated into aqueous buffers with co-solvent or surfactant.
  • Fluorophores frequently exhibit light sensitivity; minimize photobleaching by handling under subdued light and storing protected from light.
  • If working concentration is in the nM–µM range, prepare a concentrated DMSO or MeCN stock and dilute into the target medium; verify absence of precipitation and maintain low final co-solvent percentages (commonly ≤0.1–1%) as dictated by your assay.
Quality and Grades
  • Grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
  • Intended use: For research use only (per Product Data). Not for diagnostics, clinical, or therapeutic applications.

Context and expectations (general guidance):

  • Research-grade fluorescent probes are typically supplied at high chemical purity to ensure consistent optical performance and minimal background. The exact purity threshold, residual solvent limits, and analytical control parameters (HPLC, NMR, HRMS) are lot-specific and should be confirmed in the CoA.
  • If the item is supplied with stabilizers, counterions, or is provided as a salt, those details will be listed on the CoA; such features can influence solubility and spectral properties. No stabilizer/counterion information is provided in the current listing.
  • Low-UV-absorbance or HPLC-grade designations are relevant when the reagent is used in trace analysis or as a reference standard; no such designation is stated for this product.

Recommendations for QC on receipt (best practice):

  • Inspect packaging integrity and verify storage temperature on arrival (wet ice shipment indicated).
  • Review lot-specific CoA for identity, purity, and assay details. If critical to your workflow, confirm by independent LC–MS and record excitation/emission under your exact assay conditions to establish an in-house reference.
Reaction and Applications

Manufacturer-provided application detail is not included in this listing. The following reflects general uses for LightOx-branded small-molecule optical reagents and should be confirmed for LightOx™19 with the CoA/technical datasheet.

General application domains (literature/general knowledge; not item-specific):

  • Fluorescence-based detection: Use as a reporter in microscopy or spectroscopy workflows if excitation/emission are compatible with available instrumentation. Calibrate emission intensity versus concentration and verify linearity in the intended matrix.
  • Photoactive studies: Many LightOx dyes function as photosensitizers or photoreactive probes. If applicable, evaluate light-dose response and oxygen dependence, and quantify photobleaching under assay illumination.
  • Environmental polarity/viscosity sensing: Conjugated dyes can show solvatochromism or viscosity-dependent emission; validate spectral shifts in calibrant solvents before sample measurements.
  • Conjugation/immobilization (if functionalized): If LightOx™19 contains reactive handles (e.g., NHS ester, maleimide, azide/alkyne), it may be coupled to biomolecules or surfaces. Such functionality is not specified here and must be confirmed from documentation.

Practical tips (general):

  • Work under reduced light, prepare fresh dilutions, and filter (0.2 µm PTFE) if particulates are visible. Assess inner filter effects at higher optical densities (A > 0.1–0.2).
  • Record spectra in the actual buffer/medium. Control for solvent percentage, pH, and protein binding, which can modulate brightness and lifetime.
Reaction Conditions

No reaction conditions are specified for LightOx™19 in the current listing. Because the exact structure and functionality are not provided, prescriptive reaction parameters cannot be given.

General guidance for use as a fluorescent/photoactive probe (literature/general knowledge; not item-specific):

  • Illumination: Select excitation wavelengths matched to the probe’s absorption maxima (consult spectral data when available). Use bandpass filters to minimize off-target excitation and photodamage.
  • Dose management: Optimize light intensity and exposure time to balance signal strength with photobleaching/phototoxicity risks. Implement neutral density filters or pulsed illumination as needed.
  • Environment: Validate signal in the actual assay medium (buffer, serum-containing media, or polymer matrix). Confirm stability against pH, ionic strength, and redox environment.
  • Controls: Include no-dye, solvent-only, and illumination-only controls to deconvolute background fluorescence and photochemical effects.

If employing chemical conjugation (only where applicable and documented):

  • Select solvent, base, and stoichiometry according to the specific reactive handle (e.g., aqueous buffer pH 7.5–8.5 for NHS–amine coupling; pH 6.5–7.0 for maleimide–thiol). These are generic ranges and must not be assumed for LightOx™19 without confirmation.

Item-specific optimal conditions, catalysts, and yields: Not specified for this item; refer to CoA/Spec Sheet.

Safety and Handling

Safety data for this item are not specified in the listing; consult the product SDS for authoritative information.

  • GHS classification: Not specified for this item; refer to SDS.
  • Signal word / H-statements / pictograms: Not specified for this item; refer to SDS.
  • Storage: Store at 2–8 °C (per Product Data). Keep container tightly closed. Protect from light. Avoid moisture ingress if supplied as a dry solid.
  • Shipping: Shipped on wet ice (per Product Data).

General laboratory precautions (good practice; not item-specific):

  • Wear appropriate PPE: lab coat, safety glasses, and suitable chemical-resistant gloves (e.g., nitrile). Use in a fume hood to avoid inhalation of dusts/aerosols or solvent vapors.
  • Avoid skin/eye contact and ingestion. Wash thoroughly after handling.
  • If the material is a photoactive dye (typical of LightOx products), minimize unnecessary illumination and consider shielding from ambient light to reduce photoreactions and photobleaching.
  • Incompatibilities (general): Strong oxidizers/reductants and strong acids/bases may degrade organic dyes; segregate accordingly. Avoid contact with reactive metals if solution contains coordinating solvents.
  • First aid (overview; defer to SDS): In case of skin contact, wash with soap and water. If in eyes, rinse cautiously with water for several minutes and remove contact lenses if easy to do. If inhaled, move to fresh air. If swallowed, rinse mouth and seek medical advice. Provide SDS to medical personnel.
  • Waste: Collect dye-containing solutions as hazardous organic waste; follow institutional and local regulations.
Solvent Selection

Item-specific solubility and polarity are not provided. The following guidance reflects general best practices for small-molecule fluorescent dyes and photosensitizers (literature/general knowledge; verify experimentally for LightOx™19).

  • Item-specific solubility: Not specified for this item; refer to CoA/Spec Sheet.
  • Typical stock solvents: DMSO and acetonitrile are commonly used due to broad solvating power and low proticity. DMF may also be suitable but is less preferred in bioassays.
  • Aqueous use: If water solubility is limited, dilute a concentrated organic stock into buffered saline or cell media, keeping final organic co-solvent ≤0.1–1.0% v/v as assay compatibility allows. Gentle sonication may aid dispersion. Avoid precipitation and dye aggregation.
  • pH/ionic strength effects: Protonatable dyes can exhibit pH-dependent spectra and solubility; screen buffer pH and ionic strength to stabilize the desired form.
  • Surfactants/additives: Non-ionic surfactants (e.g., 0.01–0.05% Tween 20 or Pluronic F-127) can mitigate aggregation and surface adsorption for hydrophobic dyes; verify no assay interference.

Quick comparison (general):

  • DMSO: strongest solvency; low volatility; widely biocompatible at low %; hygroscopic.
  • MeCN: volatile; low viscosity; UV-transparent; miscible with water; may extract plastics.
  • Alcohols (EtOH/IPA): moderate solvency; higher % often needed; may alter membranes.

Always confirm the solvent system empirically for LightOx™19 prior to scale-up or imaging assays.

Storage and Reconstitution
  • Storage conditions: Store at 2–8 °C (per Product Data). Keep tightly closed. Protect from light. Avoid moisture ingress.
  • Shipment: Shipped on wet ice (per Product Data). Inspect upon receipt to ensure temperature compliance.
  • Long-term stability: Not specified for this item; refer to CoA/Spec Sheet.
  • Reconstitution solvent and concentration: Not specified for this item; refer to CoA/Spec Sheet.

General guidance (good practice; not item-specific):

  • If supplied as a solid: Allow container to equilibrate to room temperature before opening to prevent condensation. Prepare a concentrated stock in an appropriate dry solvent (commonly DMSO or MeCN) under subdued light. Filter if needed and aliquot into amber, low-bind vials.
  • If supplied as a solution: Verify solvent composition and concentration on the label/CoA. Store as directed and avoid repeated freeze–thaw by aliquoting.
  • Light protection: Use amber glassware and wrap containers in foil to minimize photodegradation.
  • Working solutions: Prepare immediately before use and discard remaining working solution at end of day unless stability is documented.

Any item-specific stabilizers, compatible diluents, or shelf-life claims: Not specified for this item; refer to CoA/Spec Sheet.

Structure and Identity

Brief overview: LightOx™19 is a catalog-listed research chemical from the LightOx family of photoactive/fluorescent probes. Item-specific structural identifiers have not been provided in the current listing.

  • CAS: 2324152-25-0 (as provided in Product Data)
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
  • Synonyms/branding: LightOx™19 (trade name)

Structural features (general context; literature/general knowledge, not specific to this item):

  • LightOx-branded small molecules are typically compact, aromatic fluorophores and/or photosensitizers designed for optical studies; many carry heteroaromatic rings and extended conjugation to confer absorption/emission in the visible range. The exact ring systems, substituents, charge state, and functional handles of LightOx™19 are not available here.

2D structure description (item-specific):

  • Not specified for this item; refer to CoA/Spec Sheet.

Identity verification recommendations:

  • Confirm identity by the supplier’s Certificate of Analysis (CoA) and, as appropriate for your QA system, by LC–MS, HRMS, and 1H/13C NMR, using supplier-provided reference spectra/retention times where available.
Synthetic Utility

The listing does not disclose functional groups or reactive handles for LightOx™19; therefore, item-specific synthetic applications cannot be detailed.

General considerations for dye reagents (literature/general knowledge; not specific to this item):

  • If the molecule contains a conjugation handle (e.g., NHS ester for amines, maleimide for thiols, azide/alkyne for click chemistry), it can be used to label biomolecules, polymers, or surfaces. Reaction conditions and selectivity depend on the handle and matrix.
  • Photoactive motifs can participate in photochemical transformations (e.g., singlet oxygen generation or radical initiation) under visible light, enabling photolabeling or photocrosslinking workflows. Suitability must be confirmed experimentally and through supplier documentation.
  • In materials chemistry, fluorescent chromophores can be embedded into polymers or coatings to impart sensing or reporting capabilities; compatibility with monomers/curing conditions should be verified.

Item-specific reactivity, protecting group strategy, or coupling recommendations: Not specified for this item; refer to CoA/Spec Sheet.

Target Specificity

Item-specific biological targets, epitopes, or selectivity data are not provided for LightOx™19.

  • Target/antigen name: Not specified for this item; refer to CoA/Spec Sheet.
  • Species reactivity/clone/isotype: Not applicable; this product is not described as an antibody.

General note:

  • Many small-molecule probes display physicochemical selectivity (e.g., mitochondrial accumulation via membrane potential) rather than binding to a single biomolecular epitope. Any such selectivity for LightOx™19 is not disclosed here and should be verified with supplier literature and in-house controls.

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.