mPEG7-NH2

Cat. No.: M487643
Disponible para pedir
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
Talla
USA
Alemania (EU)*
Precio
Cantidad
1g
M487643-1g
Fabricado bajo pedido · 8–12 semanas

960,90US$

1.121,90US$
Guardar 161,00 US$ (14.35%)
Enter a quantity for the sizes you want to add.

Descripción general

Description

Monodisperse PEG. The amine group reacts with a carboxyl group (-COOH) and other amine reactive chemical groups.Applications may include: bioconjugation, drug delivery, PEG hydrogel, crosslinker, and surface functionalization

Especificaciones

Información jurídica
Condiciones de almacenamiento de almacenamiento
Store at -20°C
Enviado en
Ice chest + Ice pads
Este producto requiere envío en cadena de frío. Los servicios terrestres y otros servicios económicos no están disponibles.

Datos avanzados

Certificados (CoA, COO, BSE/TSE y tabla de análisis)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculadoras de soluciones
Reseñas

Reseñas de cliente

Application Protocols

No vendor-tested bioassay protocols are specified for this item; refer to CoA/Spec Sheet if available. The following are general, non-binding protocol outlines for common uses.

  • Aqueous EDC/NHS coupling (outline):
    1. Dissolve carboxylated substrate in MES buffer (0.1 M, pH 5.5). Add EDC (1.0 eq) and NHS (1.2 eq); incubate 15–30 min on ice.
    2. Exchange to phosphate buffer (pH 7.4) rapidly (spin column or dilution). Add mPEG7-NH2 (2–3 eq). Incubate 1–2 h at RT.
    3. Quench with 10 mM hydroxylamine. Purify by dialysis/UF.
  • Organic HATU coupling (outline):
    1. Dry substrates and glassware. In anhydrous DMF, combine acid (1.0 eq), HATU (1.1 eq), DIPEA (2.5 eq). Stir 10 min at 0–25°C.
    2. Add mPEG7-NH2 (1.2–1.5 eq). Stir 2–6 h at RT. Work up by aqueous wash, dry, evaporate.
  • Surface passivation (outline):
    1. Activate COOH surface with EDC/NHS in MES pH 5.0.
    2. Rinse; immerse in mPEG7-NH2 solution in PBS pH 7.4 for 1 h.
    3. Rinse, block residual sites (e.g., ethanolamine), and characterize.

These are starting points only. Optimize stoichiometry, pH, time, and purification for your specific system.

Biological Roles

This product is intended for research use only. The following describes general roles of PEG linkers in biomolecular and materials contexts; no clinical or therapeutic claims are made.

  • Protein resistance: PEG chains sterically and entropically hinder protein adsorption on surfaces, reducing fouling and nonspecific binding in biosensors and biomaterials (literature consensus).
  • Solubilization and stabilization: Conjugation of a short PEG (e.g., PEG7) to small molecules, peptides, or nanoparticles often improves aqueous solubility and colloidal stability without adding excessive steric bulk.
  • Modulation of charge: The terminal amine is protonated under physiological pH, introducing a cationic site that can engage in electrostatic interactions (e.g., with carboxylate- or phosphate-bearing targets). This can aid in immobilization or assembly but may also increase nonspecific interactions unless shielded.
  • Spacer function: PEG7 provides a flexible, hydrophilic spacer that can separate a functional moiety from a surface or scaffold, reducing steric hindrance and improving target accessibility (e.g., in affinity ligands or catalysts).
  • Bio-orthogonality: PEG ether backbones are generally inert to many biological nucleophiles and oxidants, making them suitable for use in complex biological media.

Note: Exact behavior depends on conjugation density, chain length, and the surrounding matrix. For quantitative performance in a given assay or device, empirical optimization is recommended.

Buffer Applications

mPEG7-NH2 is not a buffering agent and is not typically used to maintain pH. Instead, it is used as a hydrophilic spacer and amine-bearing conjugation handle.

Practical guidance when using in buffers (general):

  • Choose buffers without primary amines (e.g., avoid Tris, glycine) during NHS-ester couplings, as they can quench activation. Prefer MES (pH 5–6.5), phosphate (pH 7–8), or HEPES.
  • Ionic strength and pH influence amine protonation: For nucleophilic coupling, maintain pH sufficiently above the amine’s pKa fraction to ensure some free base exists (often pH 7.5–8.5 in aqueous EDC/NHS workflows), balancing substrate stability.
  • Filtration: Short PEG conjugates typically pass 10–30 kDa MWCO membranes; for purification of conjugates, select MWCO relative to your target macromolecule rather than the PEG reagent.

Item-specific buffer specifications, pKa, and exact recipes: Not applicable/not specified for this item; refer to your reaction protocol and substrate requirements.

Green Alternatives

Although mPEG7-NH2 itself is the functional objective (a hydrophilic, amine-terminated PEG linker), greener choices can be made around its use and, where appropriate, alternative chemistries can be considered.

Greener process choices (general):

  • Solvents: Replace DMF/DCM with ethanol, isopropanol, 2-MeTHF, Cyrene, or water where compatible with activation chemistry. For aqueous amidation, EDC/NHS in buffered water (MES or phosphate) is a strong green option.
  • Coupling reagents: Favor carbodiimide (EDC) in water or acid anhydrides over high-mass, hazardous uronium salts where feasible. Enzymatic ligation (e.g., microbial transglutaminase) can be considered for biopolymer contexts.
  • Workup: Use membrane separations (ultrafiltration/diafiltration) over chromatographic adsorbents to minimize solvent use.

Alternative materials (context-dependent):

  • Glycerol- or polyglycerol-based linkers: Offer renewably sourced, highly hydrophilic alternatives with similar antifouling profiles, though with different chain architectures.
  • Zwitterionic polymers (e.g., poly(sulfobetaine), poly(carboxybetaine)): Provide superior protein resistance in some cases; however, synthetic routes may be less mature and less modular than PEG.

Trade-offs:

  • PEG7 affords well-understood biocompatibility and straightforward, high-yield amide formation. Alternatives may reduce petrochemical dependence or hazard but can complicate synthesis, analytics, or regulatory familiarity.

Summary table (general):

  • Water/EDC/NHS coupling: Pros—green, mild; Cons—buffer constraints, byproduct urea.
  • 2-MeTHF with acid activation: Pros—biobased solvent; Cons—solubility variability.
  • DMF/DCM routes: Pros—broad solubility, reliable; Cons—less sustainable, stricter handling.
Pharmaceutical Uses

No therapeutic or clinical claims. The following discusses formulation/manufacturing roles in a research and development context.

  • Excipient/processing aid (general): PEGylated linkers such as mPEG7-NH2 can be used during R&D to modulate solubility of APIs, aid in pro-drug or conjugate synthesis, or adjust rheology of experimental formulations.
  • Conjugation handle: The primary amine enables formation of stable amide/urea linkages to activated API intermediates or excipient scaffolds, facilitating construction of hydrophilic pro-moieties or targeted delivery constructs in preclinical studies.
  • Surface modification: Functionalization of device prototypes, nanoparticles, or packaging test materials to reduce biofouling and improve wettability.
  • Analytical standards: Discrete PEGs sometimes serve as calibration references for MS or SEC in development labs; PEG7-based standards can assist in method setup for oligomeric ranges.

Pharmacopeial status, residual solvent/metal limits, and GMP applicability: Not specified for this item; refer to CoA/Spec Sheet and consult relevant pharmacopeias if translation to regulated manufacturing is contemplated. For any clinical or manufacturing use, appropriate qualification and supplier auditing are required.

Physical Properties

Item-specific physicochemical specifications (mp, bp, density, water content, metals, UV cutoff): Not specified for this item; refer to CoA/Spec Sheet.

General/literature characteristics for mPEG-amine oligomers (PEG7):

  • Physical state: Typically a waxy solid to viscous syrup at ambient temperature, depending on exact end-groups and polydispersity.
  • Solubility (literature): Highly soluble in water and polar organic solvents (e.g., methanol, ethanol, acetonitrile, DMF, DMSO). Limited solubility in non-polar solvents (e.g., hexanes, toluene) unless aided by co-solvents.
  • Hygroscopicity: PEG chains are hygroscopic; the terminal amine can hydrogen-bond and absorb moisture and CO2 from air, forming ammonium carbamates under some conditions.
  • pKa (literature, terminal primary amine): Typically ~9–10 in water for simple aliphatic primary amines; effective protonation state depends on local environment and ionic strength. Exact value for this item is not specified.
  • LogP (literature trend): Strongly hydrophilic; effective logP is negative to very low positive for short PEG oligomers.
  • Viscosity: Solutions can be moderately viscous at high concentrations due to PEG chain entanglement.

Practical notes:

  • For accurate concentration determination, use mass and volumetric methods; UV quantitation is generally not applicable due to lack of strong chromophores.
  • If precise values are required for method development (e.g., refractive index, water content), consult the CoA/Spec Sheet for this SKU.
Quality and Grades
  • Grade/purity: Not specified for this item; refer to CoA/Spec Sheet.

Interpretation and best practices for PEG-amine quality (general guidance):

  • Purity measures: For discrete PEG oligomers, purity often refers to the percentage of the target oligomer length and correct end-group fidelity. Analytical methods include LC/MS or ESI-MS, GPC/SEC for distribution, and 1H/13C NMR to confirm end-groups.
  • End-group integrity: The value of mPEG7-NH2 depends critically on complete methoxy capping at one end and a free primary amine at the other. Verify via NMR (diagnostic methoxy singlet), FTIR (N–H stretches), and functional titration (e.g., TNBS assay for amines).
  • Water and residual solvents: PEGs are hygroscopic; residual water or protic solvents can impact coupling efficiency. If water or solvent limits are important to your process, confirm with the CoA (Karl Fischer, GC residuals). Not specified for this item; refer to CoA/Spec Sheet.
  • Metals and stabilizers: No stabilizers or metal content are specified for this item; refer to CoA/Spec Sheet if low-metal content is critical (e.g., for electronic or bioapplications).
  • UV transparency: Not typically optimized; HPLC-grade specs (low UV absorbance) are not implied unless stated. Not specified for this item; refer to CoA/Spec Sheet.
  • Documentation: For regulated workflows, retain CoA/SDS lot-matched to your material; discrete PEGs may be supplied with exact mass/sequence confirmation—verify upon receipt.
Reaction and Applications

mPEG7-NH2 is a versatile hydrophilic linker used to introduce PEG character and a primary amine into molecules, surfaces, and nanomaterials.

Key application families (general, literature):

  • Bioconjugation: Formation of amide bonds with activated carboxyls (NHS esters, mixed anhydrides), ureas with isocyanates, and thioureas with isothiocyanates. Useful for labeling carboxylate-bearing biomolecules, polymers, and surfaces.
  • Surface passivation: Grafting to carboxyl-terminated self-assembled monolayers or polymer films to reduce nonspecific adsorption (antifouling). Often combined with EDC/NHS chemistry on COOH-presenting surfaces (e.g., carboxylated polystyrene, oxidized graphene/GO, carboxylated nanoparticles).
  • Nanomaterials functionalization: Ligand exchange on quantum dots or metal oxides via bifunctional strategies (e.g., coupling to catechol/thiol anchoring layers), imparting water dispersibility and colloidal stability.
  • Crosslinking/building blocks: As one arm in heterobifunctional assemblies; the methoxy terminus is inert, ensuring monofunctional attachment and controlled architectures.

Practical tips:

  • Maintain low water and CO2 exposure during moisture-sensitive couplings; amines can form carbamates with CO2, reducing free amine availability.
  • Use slight molar excess of mPEG7-NH2 in amide couplings to drive completion; remove excess by ultrafiltration, dialysis, or precipitation depending on the substrate.
  • Verify conjugation by mass shift (MS for small molecules, SEC/MALS for polymers, DLS/zeta potential for nanoparticles) and by ninhydrin/TNBS assays for residual free amine.

Manufacturer Applications: Not specified for this item; see above for typical use-cases in materials science and bioconjugation.

Reaction Conditions

The following are general literature guidelines for common transformations with mPEG-amine linkers; adapt to your substrate’s stability and consult the primary literature.

  • Amide coupling to carboxylic acids:
    • Aqueous: Activate COOH substrate with EDC (0.9–1.5 eq) and NHS or sulfo-NHS (1.0–1.5 eq) in MES or phosphate buffer. Add mPEG7-NH2 (1.2–3.0 eq). pH 5.5–6.0 during activation; adjust to pH 7.2–7.8 for coupling. 0.5–4 h at RT. Quench with hydroxylamine or dilute buffer. Purify by dialysis/UF or precipitation.
    • Organic: Use HATU/HBTU/TBTU (1.0–1.2 eq) or acid chlorides with base (DIPEA 2–4 eq) in dry DMF/DCM/THF. 0–25°C, 1–12 h. Work up by aqueous washes and evaporative drying.
  • Urea/thiourea formation:
    • React with isocyanates/isothiocyanates in dry DCM/DMF (0–25°C) with base (TEA/DIPEA). Typical times 0.5–6 h. Monitor by FTIR (loss of NCO band) or LC/MS.
  • Reductive amination:
    • Combine aldehyde/ketone (1.0 eq), mPEG7-NH2 (1.2–2.0 eq) in MeOH/EtOH or DMF, pH ~5–6 (AcOH) for imine formation; reduce with NaBH3CN or picoline borane. RT–40°C, 2–16 h.
  • Surface EDC/NHS coupling:
    • Activate COOH-presenting surfaces in MES (pH 5.0–6.0), rinse, then couple with mPEG7-NH2 in phosphate buffer (pH 7.4) for 0.5–2 h.

Notes:

  • Maintain low amine-buffer background (avoid Tris/glycine) during NHS couplings.
  • Control moisture and CO2 for highly moisture-sensitive electrophiles.
  • Expected yields are substrate-dependent; PEG7 often improves conversions by solubilizing partners.
Safety and Handling

Authoritative safety information must be taken from the SDS for this SKU. The following are general considerations for PEG-amine reagents.

  • GHS classification, signal word, pictograms, H-statements: Not specified for this item; refer to SDS.
  • General hazards (literature): Primary amines may cause skin/eye irritation and respiratory irritation. PEG chains are generally of low acute toxicity but can increase skin penetration of other substances.
  • PPE: Safety glasses, lab coat, and appropriate chemically resistant gloves (e.g., nitrile). Handle powders/syrups in a well-ventilated area; avoid aerosol formation. Use a fume hood for reactions and when heating or handling volatile amine-containing solutions.
  • Incompatibilities: Strong oxidizers; acylating agents; isocyanates; epoxides; acid chlorides/anhydrides (will react). Avoid prolonged exposure to strong acids/bases that may degrade PEG under harsh conditions. Amines can absorb CO2; keep containers tightly closed under inert atmosphere if possible.
  • First aid (overview; consult SDS):
    • Skin/eye contact: Rinse with plenty of water for at least 15 minutes; remove contaminated clothing; seek medical attention if irritation persists.
    • Inhalation: Move to fresh air; obtain medical attention if symptoms occur.
    • Ingestion: Rinse mouth; do not induce vomiting; seek medical advice.
  • Fire safety: Combustible organic; use CO2, dry chemical, or foam. Thermal decomposition may produce CO, CO2, and nitrogen-containing compounds.
  • Waste: Dispose of according to institutional and local regulations; segregate amine-containing waste from incompatible oxidizers.
Solvent Selection

mPEG7-NH2 is highly compatible with polar protic and aprotic media, enabling both aqueous and organic-phase conjugations.

  • Polarity class (general): Highly polar, hydrogen-bonding capable (via terminal amine and ether oxygens).
  • Miscibility/solubility (literature):
    • Water: Freely soluble across a broad pH range; the amine is protonated under acidic to neutral pH, enhancing solubility.
    • Polar organics: Miscible with methanol, ethanol, isopropanol, acetonitrile, DMF, DMSO, and ethyl acetate (often to a high extent).
    • Non-polar solvents: Poor solubility in alkanes and aromatics; use co-solvents (e.g., add DMF or MeOH) to facilitate handling if required.
  • Selection for coupling:
    • Aqueous EDC/NHS chemistry: Use buffers such as MES (pH 5.0–6.5) or phosphate (pH 7.2–7.8) while maintaining ionic strength; avoid high primary amine buffers that consume activated esters.
    • Organic-phase acylations: Use dry DMF, DCM, or THF with base (DIPEA/TEA) for reactions with acid chlorides/activated esters; control temperature to limit side reactions.
  • Volatility and drying: PEG solutions dry slowly; azeotropic drying with toluene or co-evaporation with acetonitrile can help. Final drying under high vacuum over P2O5 or molecular sieves is common.

Quick comparison (general):

  • vs. longer PEGs (e.g., PEG12): PEG7 offers lower hydrodynamic radius and less solubilization power but higher loading per mass and reduced steric shielding.
  • vs. short alkyl amines: Vastly superior water compatibility and biocompatible surface properties.
Storage and Reconstitution
  • Storage conditions (from Product Data): Store at -20°C.
  • Shipping (from Product Data): Shipped in an ice chest with ice pads.

Handling and stability (general best practices for PEG-amine reagents):

  • Protect from moisture and CO2. Store tightly sealed under inert gas or dry air with desiccant. PEGs are hygroscopic; the amine end can absorb CO2 to form carbamates.
  • Light sensitivity: PEG backbones are generally photostable; nonetheless, store in amber or opaque containers to protect coupled chromophores after conjugation.
  • Freeze/thaw: If provided as a solution, aliquot to avoid repeated freeze–thaw cycles which can introduce moisture and contaminants. For solids/syrups, equilibrate to room temperature in a desiccator before opening to prevent condensation.

Reconstitution (general):

  • Solvents: Water, PBS (avoid during NHS-ester couplings), MES buffer, methanol, ethanol, acetonitrile, DMF, or DMSO, depending on downstream chemistry.
  • Typical concentrations: 10–200 mM for small-molecule couplings; 1–50 mg/mL for surface/nanomaterial treatments. Adjust to solubility and viscosity limits.
  • Drying: To prepare anhydrous stock, dissolve in dry solvent and concentrate under reduced pressure; repeat with a dry co-solvent (e.g., acetonitrile) and finish under high vacuum.

Always consult the CoA/SDS for lot-specific guidance and stability information.

Structure and Identity

mPEG7-NH2 is a discrete, short-chain, monofunctional poly(ethylene glycol) bearing a terminal primary amine and a methoxy cap on the opposite end. It serves as a hydrophilic, flexible spacer/linker for bioconjugation and materials modification.

  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
  • CAS: Not specified for this item; refer to CoA/Spec Sheet.

Structural features (general, literature):

  • Backbone: A hepta(ethylene glycol) segment, i.e., seven –CH2–CH2–O– repeat units (PEG7) conferring high hydrophilicity and conformational flexibility.
  • End groups: One terminus is methoxy-capped (–OCH3), the other is a primary amine (–NH2). This renders the molecule monofunctional for nucleophile-driven ligations.
  • Functional groups: Ether linkages throughout the PEG chain; terminal primary amine capable of forming amide/urea/thiourea and participating in reductive amination.
  • 2D description: A linear chain of alternating ethylene and oxygen atoms (–CH2–CH2–O–)×7 with a methoxy at one end and an amine at the other; no rings or stereogenic centers.

Notes:

  • Discrete PEG oligomers such as PEG7 can be supplied as narrow-distribution or exact-length materials; verify exact structure and any linkers in the CoA for this SKU. All item-specific identifiers not listed above are not specified for this item; refer to CoA/Spec Sheet.
Synthetic Utility

Functional group profile and reactivity (general):

  • Primary amine (–NH2): Nucleophilic substitution on activated electrophiles; acylation to amides (acid chlorides, anhydrides, activated esters); formation of ureas (isocyanates) and thioureas (isothiocyanates); reductive amination with aldehydes/ketones.
  • Methoxy terminus: Inert cap ensuring monofunctionality; prevents uncontrolled crosslinking, enabling well-defined conjugation stoichiometry.
  • PEG chain: Enhances solubility in water/polar solvents; provides flexible spacing between conjugation site and substrate.

Use cases:

  • Install a hydrophilic spacer onto small molecules or surfaces bearing carboxyls via EDC/NHS in water or uronium reagents in DMF. The resulting amide retains PEG’s hydration shell, often improving solubility and reducing aggregation.
  • Construct heterobifunctional systems by coupling the amine to a scaffold and subsequently reacting the scaffold’s other handle with a target (the methoxy end remains silent).
  • Interface chemistry: Couple to COOH-terminated SAMs/polymers for antifouling layers; layer-by-layer assembly using electrostatics when protonated.

Analytical confirmation:

  • NMR: Methoxy singlet, PEG methylene multiplets, and amide formation shifts post-coupling.
  • MS/SEC: Mass shift or hydrodynamic radius change commensurate with PEG7 addition.
  • Colorimetric amine assays (TNBS, ninhydrin) to quantify residual free amine after conjugation.
Target Specificity

Not applicable. This SKU is a small-molecule/oligomeric PEG reagent, not a biological affinity reagent or antibody. No target, epitope, clone, isotype, or species reactivity applies. For intended conjugation targets and selectivity, refer to Reaction & Applications and Synthetic Utility sections.

Preguntas frecuentes

How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

¿Quieres que te enviemos un mensaje cuando tengamos descuentos disponibles?

Recordármelo más tarde

¡Gracias! Por favor, revisa tu bandeja de entrada de correo electrónico para confirmar.

¡Vaya! Las notificaciones están desactivadas.