average Mₙ ~10,000, powder for sensitive chromatographic and analytical workflows requiring minimal baseline interference.
Room temperature Ships Check lot-specific COA for exact specifications.
SDS, COA, datasheet, and spec sheet available for download. Lot-specific COA accessible via lot number lookup.
Cited in 1 peer-reviewed publications across chromatography, organic synthesis, and cross-coupling reactions.
Poly(1,4-phenylene sulfide)(PPS) is an aromatic polymer that can be used as a polymer backbone or an engineering plastic. It is also called as poly(phenylene sulfide) which can be sulfonated to form ion-exchange membranes for electrochemical applications. It is industrially produced by polycondensation ofp-dichlorobenzene and sodium sulfate inN-methylpyrrolidone as a solvent.Auto intake manifolds and pumps, electrical connectors and circuit boards, flame-resistant clothing, valves, coatings, non-stick coatings, power tool parts and heater grills.PPS can be sulfonated to form a proton exchange membrane with zeolite that can be used as an electrolyte with higher thermal stability which facilitates in the fabrication of solar cells. It can also be used in the formation of organic- inorganic nanocomposite membranes using nanozeolites and carbon nanotubes as nanofillers which can be used as high performance gas separation membranes. PPS may be sulfonated and chloromethylated to form novel PPS fiber with higher dyeing ability in dispersive, anionic and cationic dyes.
| Sonrisas canónicas | CC1=CC=CC=C1C2C3=C(C(=C(C=C3)F)F)OCC=CC4(CCC4)N5CN2N6C=CC(=O)C(=C6C5=O)O.CC1=CC=CC=C1C2C3=C(C(=C(C=C3)F)F)OCC=CC4(CCC4)N5CN2N6C=CC(=O)C(=C6C5=O)O |
|---|---|
| Isómeros SMILES | CC1=CC=CC=C1C2C3=C(C(=C(C=C3)F)F)OCC=CC4(CCC4)N5CN2N6C=CC(=O)C(=C6C5=O)O.CC1=CC=CC=C1C2C3=C(C(=C(C=C3)F)F)OCC=CC4(CCC4)N5CN2N6C=CC(=O)C(=C6C5=O)O |
| PubChem CID | 168266275 |
Comprehensive hazard, handling, storage, and regulatory compliance document.
Download SDS →Lot-specific quality data. Enter your lot number to retrieve the exact COA.
Look up COA →Full quality attributes and acceptance criteria for this grade.
View spec sheet →| Punto de inflamación (°F) | Not applicable |
|---|---|
| Punto de inflamación (°C) | Not applicable |
| Punto de fusión (°C) | 285-300℃ |
| 1. Bihua Shen, Zhengli Guo, Bingqing Huang, Guoguang Zhang, Peng Fei, Shirong Hu. (2022) Preparation of hydrogels based on pectin with different esterification degrees and evaluation of their structure and adsorption properties. INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES, [PMID:34995665] [10.1016/j.ijbiomac.2021.12.160] |
