Poly(3,4-ethylenedioxythiophene)-block-poly(ethylene glycol) solution - 1wt % dispersion in nitromethane, contains perchlorate as dopant

Cat. No.: P485525

GRADE & PURITY 1wt % dispersion in nitromethane, contains perchlorate as dopant

Synonyms

PEDOT-block-PEG, Aedotron C-NM

Storage

Room temperature

Descripción general

Please follow this link forAedotron/Oligotron selection guide table.Aedotron™polymers are solvent-dispersable forms of PEDOT. These are copolymers of doped PEDOT and a flexible, soluble polymer such as poly(ethylene glycol) (PEG). These colloidal dispersions are stabilized by the highly solvated PEG chains which sterically limit the aggregation of the PEDOT blocks. Aedotron polymers are neither acidic nor corrosive, it easily disperses in polar aprotic solvents. Perchlorate-doped copolymers typically have a higher conductivity with thin films that are more transparent.Nitromethane dispersions can be used to cast thin films on glass, ITO, silicon wafers and many polymeric substrates. Compatibility of the polymeric substrate with nitromethane should be tested in each case. Coat the substrate with a "pool" of the nitromethane dispersion. Thin transparent films are typically spun at 1000 RPM or higher speeds, but more conducting films can be obtained at lower speeds. A single layer spun at 1000 RPM is typically 75 nm thick.Conducting polymer. Useful as anti-static layers, hole-transport layers in OLED′s and various organic electronics applications (flexible circuits, capacitors, batteries).

Specifications

Sinónimos

PEDOT-block-PEG, Aedotron C-NM

Especificaciones y pureza

1wt % dispersion in nitromethane, contains perchlorate as dopant

Información jurídica

Aedotron is a trademark of TDA Research, Inc.

Condiciones de almacenamiento de almacenamiento

Room temperature

Propiedades químicas y físicas

• Sensibilidad: Please store this product at room temperature (do not freeze or refrigerate). If there is a slight precipitation in the product, it is a normal phenomenon. Before use, please stir, sonicate, and filter. Glass wool can be filled at the front end of the pip