≥95% for sensitive chromatographic and analytical workflows requiring minimal baseline interference.
Protected from light,Store at -20°C,Desiccated Ships Ice chest + Ice pads Check lot-specific COA for exact specifications.
SDS, COA, datasheet, and spec sheet available for download. Lot-specific COA accessible via lot number lookup.
Cited in 0 peer-reviewed publications across chromatography, organic synthesis, and cross-coupling reactions.
7 Tag Peptide is a protein tag, which consists of 11 N-terminal residues of T7 phage capsid protein GP10. T7 Tag Peptide can be used for different immunoassays and affinity purification.
Sequence (Three-Letter Code): Met-Ala-Ser-Met-Thr-Gly-Gly-Gln-Gln-Met-Gly
Sequence (One-Letter Code): MASMTGGQQMG
The T7 Tag Peptide is commonly used for competitive elution of T7 tag fusion proteins bound to T7 Tag antibodies. It can be used to elute T7 tag fusion proteins from Anti-T7 Magnetic Beads or conventional T7 Tag antibodies during immunoprecipitation.This product competitively elutes the T7 Tag fusion protein, and the eluted sample does not contain the light and heavy chains of T7 Tag antibodies, thus effectively eliminating the interference of antibodies with subsequent Western blot analysis.The main parameters of T7 Tag Peptide are as follows
Precautions
The solution of this product should be aliquoted and stored at -20℃ or lower temperatures to avoid repeated freeze-thaw cycles.This peptide is easily dissolved in organic solvents such as TFA and slightly soluble in water. For the powder form, it should be prepared with TFA to 100mg/ml first, then diluted to 5mg/ml or lower concentrations with TBS or water. High concentration aqueous solution may precipitate after freeze-thaw.This product is for R&D only. Not for drug, household, or other uses.For your safety and health, please wear a lab coat and disposable gloves during the operation.
Instructions for Use
1. For P9819-25mg provided in powder form, centrifuge at 8,000-12,000×g for 10-30 seconds before opening to collect the powder at the bottom of the tube. Dissolve it in TFA by gently pipetting or shaking. Do not vortex vigorously to avoid denaturation and inactivation of the peptide.2. P9819-1mg and P9819-5mg can be directly used for preparing elution buffer. 3. Competitive elution with the T7 Tag Peptide: This elution method is non-denaturing, with high elution efficiency, and the eluted sample does not contain the light and heavy chains of T7 Tag antibodies.a. Preparation of T7 tag elution buffer: Based on the required amount of elution buffer, dilute an appropriate amount of T7 Tag Peptide stock solution with TBS to a final concentration of 150μg/ml.b. Add 100μl of T7 tag elution buffer (150μg/ml) to each immunoprecipitated sample, and incubate on ice or at 4℃ for 30 minutes to 2 hours with shaking. In order to improve the elution efficiency, the incubation time can be extended or the elution can be repeated. The volume of the T7 tag elution buffer is generally 5 times that of the bead or gel suspension.c. Centrifuge at 6000×g for 30 seconds at 4℃, and carefully transfer the supernatant to a new tube. The supernatant contains the T7 tag fusion protein and its protein complexes. Be careful not to touch the resin when taking the supernatnant. 4. Store the eluted T7 tag fusion protein at 4℃ for immediate use, or at -20℃ for long-term storage.
| Peso molecular | 1098.27(free base) |
|---|
Comprehensive hazard, handling, storage, and regulatory compliance document.
Download SDS →Lot-specific quality data. Enter your lot number to retrieve the exact COA.
Look up COA →Full quality attributes and acceptance criteria for this grade.
View spec sheet →
H2529574