1-Dodecanol - ≥98%(GC) , CAS No.112-53-8

CAS: 112-53-8 Cat. No.: D112298 분자식: C12H26O 분자량: 186.33 Beilstein Registry Number: 1738860 EC 번호: 203-982-0
주문 가능
등급 & 순도 ≥98%(GC)
Synonyms
Dodecyl alcohol|laurylalcohol|Adol 10|LAUREX NC|Laurinic alcohol|Lorol C 12|Philcohol 1200|Lorol 5|1-DODECANOL|CO 12|Undecyl carbinol|1-Hydroxydodecane|Cachalot L-90|Hainol 12SS|CO-1214|Lauric alcohol|Lipocol L|n-Lauryl alcohol, primary|CACHALOT L-90 LAURYL ALCOHOL|Dytol J-68|Alfol 12|1-DODECANOL [MI]|Lorol|12 OH|Nacol 12-96|NACOL 12-99 ALCOHOL|Lorol 11|1-DODECANOL [HSDB]|CO-1214S|Dytol J-68 (VAN)|Lauryl 24|Lorol special|n-Dodecyl alcohol|Alcohol C12|Alcohol C-12|CO-1214N|n-Dodecanol|Adol 12|Lauroyl alcohol|LAURYL ALCOHOL (USP-RS)|Lauryl Alcohol; 1-Dodecanol|Lorol 7|n-Lauryl alcohol|Sipol L 12|Adol 11|FEMA Number 2617|Duodecyl alcohol|Hydroxydodecane|Pisol|Siponol L2|C12 alcohol|Cachalot L-50|LAURYL ALCOHOL [INCI]|Sipol L12|Dodecanol-1|LAURYL ALCOHOL [FHFI]|NAA 42|Conol 20P|Lauryl alcohol|LAURYL ALCOHOL [USP-RS]|LAUREX L1|Siponol L5|Co-1214S1-dodecanol|Dodecanol, 1-|Dodecyl alcoho|Karukoru 20|n-Dodecan-1-ol|1-dodecanol (ACD/Name 4.0)|EPAL 12|Lorol C12|n-dodecylalcohol|ALFOL 1216 CO ALCOHOL|Dodecan-1-ol|LAURYL ALCOHOL [FCC]|Dodecanol|1-Dodecyl alcohol
Storage
Room temperature
Shipped In
Normal
★
크기
USA
독일 (EU)*
가격
수량
100ml
D112298-100ml
재고 있음 ≥10
5 재고 있음
US$9.90
500ml
D112298-500ml
2 재고 있음
1 재고 있음

US$23.90

US$28.90
저장 US$5.00 (17.30%)
Enter a quantity for the sizes you want to add.

사양

동의어
Dodecyl alcohol | laurylalcohol | Adol 10 | LAUREX NC | Laurinic alcohol | Lorol C 12 | Philcohol 1200 | Lorol 5 | 1-DODECANOL | CO 12 | Undecyl carbinol | 1-Hydroxydodecane | Cachalot L-90 | Hainol 12SS | CO-1214 | Lauric alcohol | Lipocol L | n-Lauryl alcohol, primary | CACHALOT L-90 LAURYL ALCOHOL | Dytol J-68 | Alfol 12 | 1-DODECANOL Show more
사양 및 순도
≥98%(GC)
보관 조건
Room temperature
배송
Normal
순수함
≥98%(GC)
이름과 식별자
Pubchem Sid
Pubchem Sid Url
https://pubchem.ncbi.nlm.nih.gov/substance/488180726
정식 스마일
CCCCCCCCCCCCO
IUPAC Name
dodecan-1-ol
InChIKey
LQZZUXJYWNFBMV-UHFFFAOYSA-N
INCHI
1S/C12H26O/c1-2-3-4-5-6-7-8-9-10-11-12-13/h13H,2-12H2,1H3
이성체 SMILES
CCCCCCCCCCCCO
WGK 독일
1
RTECS
JR5775000
UN 번호
3077(international)
포장 그룹
III
분자량
186.33
Beilstein
1738860
Reaxy-Rn
1738860
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=1738860&ln=

고급 데이터

Taxonomic Classification

Taxonomy Tree

KingdomOrganic compounds
SuperclassLipids and lipid-like molecules
분류Fatty Acyls
SubclassFatty alcohols
Intermediate Tree Nodes Not available
Direct ParentFatty alcohols
Alternative Parents Primary alcohols  Hydrocarbon derivatives  
Molecular FrameworkAliphatic acyclic compounds
Substituents Fatty alcohol - Organic oxygen compound - Hydrocarbon derivative - Primary alcohol - Organooxygen compound - Alcohol - Aliphatic acyclic compound
설명This compound belongs to the class of organic compounds known as fatty alcohols. These are aliphatic alcohols consisting of a chain of a least six carbon atoms.
External Descriptors a long-chain alcohol - a primary alcohol - a fatty alcohol
3D 구조
상호 작용 화학 구조 모델





관련 대상(비인간)
Staphylococcus aureus (210822 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
Mycobacterium tuberculosis (203094 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
Saccharomyces cerevisiae (19171 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
Cutibacterium acnes (887 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
Trpa1 Transient receptor potential cation channel subfamily A member 1 (1003 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
작용 메커니즘
인증서(CoA, COO, BSE/TSE 및 분석 차트)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

18 results found

Lot NumberCertificate Type날짜항목
H2626101H2626101Certificate of AnalysisSep 04, 2026 D112298
H2626133H2626133Certificate of AnalysisAug 31, 2026 D112298
H2626100H2626100Certificate of AnalysisAug 31, 2026 D112298
C2606174C2606174Certificate of AnalysisMar 17, 2026 D112298
K2526223K2526223Certificate of AnalysisNov 29, 2025 D112298
K2526216K2526216Certificate of AnalysisNov 29, 2025 D112298
A2211593A2211593Certificate of AnalysisOct 13, 2025 D112298
G2315442G2315442Certificate of AnalysisJul 20, 2023 D112298
E23301336E23301336Certificate of AnalysisJun 05, 2023 D112298
E23301338E23301338Certificate of AnalysisJun 05, 2023 D112298
I2518051I2518051Certificate of AnalysisJun 05, 2023 D112298
B2301238B2301238Certificate of AnalysisFeb 15, 2023 D112298
L2216861L2216861Certificate of AnalysisJul 05, 2022 D112298
F2225166F2225166Certificate of AnalysisJul 05, 2022 D112298
A2211594A2211594Certificate of AnalysisJan 21, 2022 D112298
F2225193F2225193Certificate of AnalysisJan 15, 2022 D112298
A2510063A2510063Certificate of AnalysisJan 15, 2022 D112298
A2211592A2211592Certificate of AnalysisJan 15, 2022 D112298
화학 및 물리적 특성
용해성Insoluble in water and glycerol, soluble in propylene glycol, ethanol, benzene, chloroform, and ether.
동결점(°C)23 °C
굴절률1.428
발화점(°C)>100℃
끓는점(°C)255-259°C
녹는점(°C)24°C
분자량186.330 g/mol
XLogP35.100
Hydrogen Bond Donor Count1
Hydrogen Bond Acceptor Count1
Rotatable Bond Count10
Exact Mass186.198 Da
Monoisotopic Mass186.198 Da
Topological Polar Surface Area20.200 Ų
Heavy Atom Count13
Formal Charge0
Complexity81.200
Isotope Atom Count0
Defined Atom Stereocenter Count0
Undefined Atom Stereocenter Count0
Defined Bond Stereocenter Count0
Undefined Bond Stereocenter Count0
The total count of all stereochemical bonds0
Covalently-Bonded Unit Count1
자주 묻는 질문과 기사
How Alkyl Polyglucosides (APG) Differ from Cocamidopropyl Betaine (CAPB): Structure, Foam Performance, and Applications in Personal Care and Household-Care Formulations
K12 (Sodium Lauryl Sulfate/SLS) Is More Than a Foaming Agent: Structure, Properties, and Applications in Personal Care and Household Care Formulations
Role of Alkyl Glucosides APG in Cleaning Formulations: Structural Features, Core Performance, and Selection Considerations
AES (Fatty Alcohol Polyoxyethylene Ether Sulfate) in Personal and Home-Care Cleansing Formulations: An Analysis of Structure, Performance, and Low-Temperature Flowability
Interfacial Mechanism and Formulation Applications of AEO-9 (Fatty Alcohol Polyoxyethylene Ether): An Analysis of Emulsification, Wetting, Oil Soil Removal, and Co-Formulation Compatibility
Mechanism of Action and Selection Logic of Defoamers for Daily Chemical Products: Foam Stability, Foam-Breaking Mechanisms, and Representative Raw Material Analysis
Analysis of the Foaming Performance Differences Between K12 and AOS: Structure, Acid–Base Stability, and Formulation Selection
Understanding Anionic Surfactants in Household and Personal-Care Formulations from a Structural Perspective: Structural and Performance Differences among Representative Raw Materials such as LAS, AES, K12, AOS, MES, and FMES
Structure, Degradation Behavior, and Applications of Poly(trimethylene carbonate) (PTMC) in Flexible Absorbable Materials
Citations of This Product
솔루션 계산기
리뷰

고객 리뷰

Application Protocols

Not applicable. No antibody- or assay-validated application protocols (e.g., WB, IHC, IF, FC) are associated with this small-molecule reagent. For synthetic procedures involving 1-dodecanol, see Reaction Conditions and Application notes in Reaction & Applications and Synthetic Utility.

Biological Roles

This section provides general biochemical context only; no clinical or therapeutic claims are made.

  • Metabolic fate (literature): Primary aliphatic alcohols like 1-dodecanol are oxidized by alcohol dehydrogenases to the corresponding aldehyde (dodecanal) and then to lauric acid (dodecanoic acid) via aldehyde dehydrogenase. Lauric acid enters β-oxidation pathways.

  • Membrane interactions: The C12 chain imparts strong hydrophobicity; 1-dodecanol can partition into lipid bilayers and perturb membrane order at sufficient concentrations, analogous to other medium/long-chain alcohols.

  • Surfactant-related chemistry: The lauryl moiety is a core hydrophobe in many amphiphiles (e.g., dodecyl sulfates, phosphates, quaternary ammonium salts) used as model membrane disruptors in biochemical assays. 1-Dodecanol functions primarily as a precursor for such amphiphiles rather than as a biological buffer or ligand.

  • Protein/lipid modification: Dodecylation (installation of a C12 chain) is used in research to modulate protein or small-molecule membrane affinity, create detergents for membrane protein extraction, or alter pharmacokinetic-like properties in model systems (research use only).

  • Toxicology note (general): Long-chain alcohols exhibit low acute toxicity but can be irritant; always evaluate concentration-dependent effects in biological assays and include appropriate vehicle controls.

Buffer Applications

1-Dodecanol is not used as an aqueous buffer component due to its extremely low water solubility and lack of useful acid–base buffering capacity near physiological pH. For experiments requiring amphiphiles or membrane mimetics, consider water-soluble surfactants (e.g., CHAPS, Triton X-100 analogs, or zwitterionic buffers) and consult those specific product pages. Use 1-dodecanol primarily as a hydrophobic modifier or as a precursor to amphiphiles rather than as a buffer constituent.

Green Alternatives

Perspective: 1-dodecanol itself can be sourced from renewable feedstocks (hydrogenation of plant-derived lauric acid). Greener process choices often revolve around solvent and reagent selection when using 1-dodecanol.

  • Greener sourcing (general):

    • Select bio-based 1-dodecanol (RSPO-certified palm/kernel or coconut derivatives) to reduce fossil carbon footprint.
  • Greener solvent choices when reacting 1-dodecanol (literature/guidance):

    • Replace chlorinated solvents (e.g., DCM) with 2-MeTHF, CPME, ethyl acetate, or dimethyl carbonate where compatible (e.g., Steglich esterification variants, Mitsunobu alternatives).
    • Employ solventless or reactive-solvent conditions: use neat 1-dodecanol with solid acid catalysts (e.g., Amberlyst, sulfonated resins) for ester synthesis to minimize solvent use.
  • Reagent choices:

    • For esterification, enzyme-catalyzed (lipase) protocols in green solvents or solvent-free setups at moderate temperatures often deliver high selectivity and lower E-factors.
    • Avoid azodicarboxylates when possible; consider alternative alcohol activation strategies (e.g., PPh3/iodine for Appel-type or catalytic dehydrative couplings) with attention to waste streams.
  • Comparative overview (general): | Use case | Conventional choice | Greener alternative | Tradeoffs | | --- | --- | --- | --- | | Steglich esterification | DCM + DCC/DMAP | 2-MeTHF or EtOAc + EDC/DMAP | Solubility and rate may vary; monitor. | Fischer esterification | Toluene reflux (Dean–Stark) | Neat alcohol + solid acid or bio-based 2-MeTHF | Heat transfer/viscosity management. | Oxidation to aldehyde | Swern or Cr(VI) | Catalytic TEMPO/bleach or O2 systems | Selectivity control; aqueous workup.

Document solvent switching with small-scale trials and green metrics (E-factor, PMI, energy) before scale-up.

Pharmaceutical Uses

Research/manufacturing context only; no therapeutic claims.

  • Excipient/intermediate roles (general):

    • Precursor to dodecyl sulfate (e.g., sodium lauryl sulfate), an anionic surfactant used as a wetting/disintegrant aid in solid dosage and as a processing aid.
    • Formation of dodecyl esters (laurates) that serve as emollients, lubricants, or penetration-modifying excipients in topical and cosmetic research formulations.
    • Surface treatment of excipient particles (e.g., hydrophobization) to tune flowability and moisture uptake in dry blends.
  • Manufacturing considerations:

    • Residual solvent control: 1-dodecanol’s low volatility requires attention to removal (vacuum/thermal) if used as a processing aid or reactive solvent.
    • Purity profile: homolog distribution (C10–C14) and peroxide/acid values can influence odor, color, and stability of finished goods; specify limits on the CoA for GMP-relevant work.
  • Regulatory notes (general):

    • Monograph coverage for the alcohol itself may be limited; related materials (e.g., lauryl alcohols, laurates, and SLS) have compendial specifications in various pharmacopeias. Confirm current status for your jurisdiction.
  • Compatibility:

    • Generally compatible with hydrophobic APIs and excipients; may soften certain plastics/elastomers—verify container compatibility during development.
Physical Properties

Note: Values below are literature/typical references for 1-dodecanol (lauryl alcohol) and are provided for method development and planning. They are NOT item-specific specifications.

  • Phase/appearance (literature): Colorless, waxy solid near room temperature; may liquefy slightly above ambient.
  • Melting point (literature): ~24–26 °C (solidifies near room temperature).
  • Boiling point (literature): ~259–263 °C at 1 atm.
  • Density (literature): ~0.830–0.835 g/mL at 20 °C (liquid state).
  • Refractive index (literature): nD20 ~1.430–1.434.
  • Vapor pressure (literature): Very low at 25 °C (<<1 mmHg); low volatility.
  • LogP (literature): ~5.0–5.2 (highly hydrophobic).
  • pKa (literature, ROH ⇌ RO− + H+): ~16 (in water; effective acidity context-dependent).
  • Solubility (literature):
    • Water: very low (on the order of mg/L at 20–25 °C).
    • Miscible with many organic solvents (alcohols, ethers, chlorinateds, aromatics, hydrocarbons).
  • Dielectric/polarity (literature): Polar protic but weakly polar overall due to long aliphatic chain; strong H-bonding donor/acceptor at the OH terminus.

Item-specific specs (this lot):

  • Any exact values (e.g., UV cutoff, trace metals, water content) — Not specified for this item; refer to CoA/Spec Sheet.
Quality and Grades
  • Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.

  • How to interpret common grades for this material (general guidance):

    • Technical grade: suitable for general synthesis, detergent/surfactant intermediate work; may contain higher levels of water, aldehydes, or peroxides formed by air exposure (alcohols are less peroxide-prone than ethers, but aging can produce trace aldehydes/acids).
    • Reagent/ACS grade: meets defined impurity limits; appropriate for most synthetic transformations without additional purification.
    • High-purity or GC/HPLC grade: tighter control of non-volatile residue, UV-absorbing impurities, and volatiles; preferred for analytical method development or kinetics where trace impurities can bias results.
  • Stabilizers/antioxidants:

    • Not specified for this item; refer to CoA/Spec Sheet. Primary alcohols are usually shipped unstabilized; users may add molecular sieves (3Å/4Å) to reduce water during moisture-sensitive coupling steps.
  • Typical quality control tests (literature/common practice):

    • GC purity and profile of homologs (C10, C11, C13 alcohols), water by Karl Fischer, acid value (mg KOH/g), hydroxyl value, and color (APHA).
  • Fit-for-use guidance:

    • Moisture-sensitive reactions (e.g., Steglich esterification, Mitsunobu): dry over activated sieves and verify KF moisture.
    • Surfactant/ester synthesis: aldehyde/acid byproducts can affect odor/color; check acid value and perform a short-path distillation if required.
    • Chromatography: if using as mobile-phase modifier (rare), confirm low UV background in the intended wavelength range.
Reaction and Applications

1-Dodecanol is a versatile primary alcohol serving as a hydrophobic C12 handle in synthesis, materials, and surfactant chemistry.

  • Representative transformations (general/literature):

    • Esterification to dodecyl esters (laurates): Fischer (acid-catalyzed, reflux) or Steglich (DCC/EDC + DMAP) routes to plasticizers, fragrance esters, and lipid-mimetic probes.
    • Ether formation: Williamson ether synthesis after deprotonation with NaH/Na/K to give dodecyl ethers (e.g., TBAB-dodecyl ether) for phase-transfer or amphiphiles.
    • Mitsunobu alkylation: converts acidic pronucleophiles (e.g., phenols, certain carboxamides) to O-dodecyl derivatives with inversion at a chiral electrophile.
    • Activation to leaving groups: tosylate/mesylate formation followed by SN2 to access dodecyl halides, azides, or thiolates.
    • Oxidation: to dodecanal (PCC, Swern) or dodecanoic acid (Jones, TEMPO/bleach variants, or catalytic aerobic systems) for fatty aldehyde/acid chemistry.
  • Applications:

    • Surfactant precursor: quaternary ammonium salts, sulfates (e.g., dodecyl sulfate), phosphates; tuning CMC and micelle size with the C12 chain.
    • Materials: hydrophobization of surfaces/polymers via grafted dodecyl groups; compatibilizers in blends.
    • Bioconjugation/membrane studies: preparing lipid anchors to modulate membrane association of probes/peptides (non-clinical, research-only).
  • Practical tips:

    • Drying: for moisture-sensitive couplings, dry over activated 3Å/4Å sieves; verify KF.
    • Stoichiometry: in Fischer esterification, using 1-dodecanol as solvent drives equilibrium toward ester formation with azeotropic water removal.
    • Workup: high hydrophobicity aids phase separation; warm if solidification impedes transfers.
Reaction Conditions

The following are literature-style, general conditions for transformations of 1-dodecanol. Optimize for your substrate and scale.

  • Fischer esterification (to laurates):

    • Typical: carboxylic acid (1.0 eq), 1-dodecanol (2–5 eq or solvent), catalytic H2SO4 or p-TsOH, reflux (toluene or neat) with Dean–Stark water removal, 3–24 h. Isolated yields often 70–95% depending on acid volatility and sterics.
  • Steglich/EDC esterification:

    • Acid (1.0 eq), 1-dodecanol (1.2–2.0 eq), DCC or EDC·HCl (1.2–1.5 eq), DMAP (5–10 mol%), solvent such as DCM/2-MeTHF/EtOAc, 0–25 °C to rt, 2–18 h. Typical yields 70–95%.
  • Williamson ether synthesis:

    • 1-dodecanol (1.0 eq) in dry THF or DMF, NaH (1.1–1.5 eq, 60% dispersion) at 0 °C to rt; add primary alkyl halide (1.1–1.5 eq); 0–60 °C, 2–16 h. Work under inert atmosphere. Yields commonly 60–90%.
  • Tosylation/mesylation:

    • TsCl (1.1–1.5 eq) or MsCl (1.1–1.5 eq), base (pyridine, Et3N), DCM or MeCN, 0 °C to rt, 1–6 h, giving ROTs/ROMs for subsequent SN2.
  • Oxidation:

    • To aldehyde: Swern (DMSO, (COCl)2, −78 to 0 °C), or PCC in DCM at rt; 70–90% typical.
    • To acid: TEMPO/NaOCl with NaClO2 (two-step) or catalytic TEMPO/O2 variants; chromium(VI) methods are effective but less green.
  • Mitsunobu alkylation:

    • ROH partner (acidic nucleophile) + 1-dodecanol, DIAD/DEAD (1.2–1.5 eq), PPh3 (1.2–1.5 eq), THF/2-MeTHF, 0–25 °C; monitor by TLC/GC.

Notes:

  • Drying: Use 3Å/4Å sieves or azeotropic removal when water-sensitive.
  • Mass transfer: Warm gently if solidification occurs near room temperature to maintain homogeneity.
  • Always assess safety (e.g., gas evolution with NaH, azodicarboxylate handling) and waste minimization.
Safety and Handling

Authoritative safety decisions must be based on the SDS for this exact item/lot.

  • Item-specific hazard data (from Product Data):

    • Signal Word: Not specified for this item; refer to SDS.
    • H-Statements: Not specified for this item; refer to SDS.
    • GHS Classification: Not specified for this item; refer to SDS.
    • Pictograms: Not specified for this item; refer to SDS.
  • General safety information for 1-dodecanol (literature/typical):

    • Low vapor pressure; inhalation risk is generally low under ambient conditions. Combustible liquid/solid; may form irritating fumes on thermal decomposition.
    • Causes eye and skin irritation on contact; prolonged exposure may defat skin.
    • Environmental: harmful to aquatic organisms with long-term effects; avoid release to environment.
  • Handling recommendations (general best practice):

    • Wear appropriate PPE: lab coat, safety glasses or face shield, and chemical-resistant gloves (e.g., nitrile). Use in a fume hood during heating, reaction setup, or aerosol generation.
    • Avoid contact with strong oxidizers (e.g., nitric acid, peroxides), strong reducing agents, and strong acids/bases when not intended in process.
    • Fire safety: keep away from ignition sources; use CO2, dry chemical, or foam for firefighting. Alcohol-resistant foam preferred for larger fires.
  • First aid (overview; consult SDS):

    • Skin/eye contact: rinse with water for ≥15 min; remove contaminated clothing; seek medical attention for persistent irritation.
    • Inhalation: move to fresh air; monitor; seek medical attention if symptoms persist.
    • Ingestion: rinse mouth; do not induce vomiting; seek medical advice.

Always consult the item-specific SDS before use.

Solvent Selection

1-Dodecanol is primarily used as a hydrophobic reagent or intermediate rather than a routine laboratory solvent. However, it can serve as a high-boiling, weakly polar protic medium or cosolvent in specialized contexts.

  • Polarity/miscibility (literature/general):

    • Polar protic functionality with overwhelmingly hydrophobic character due to C12 chain.
    • Immiscible with water; miscible with many organic solvents (alcohols, ethers, aromatics, chlorinateds, hydrocarbons).
  • When to select 1-dodecanol as medium:

    • To favor reactions requiring a protic environment at elevated temperatures (bp ~260 °C) without substantial solvent evaporation (e.g., certain transesterifications, waxy substrate handling).
    • As a reactive solvent: acts both as medium and nucleophile (e.g., direct formation of dodecyl esters via Fischer conditions with an acid catalyst).
  • Alternatives and comparison (general):

    • 1-Octanol/1-decanol: lower viscosity and bp; easier handling if lower hydrophobicity is acceptable.
    • 2-Propanol/ethanol: much more polar and volatile; favored for solubility of polar reagents and easier removal.
    • Toluene/xylene: aprotic, aromatic high-boilers; suitable when proticity is undesirable.
  • Practical tips:

    • If solidified (mp ~24–26 °C), gently warm (30–40 °C) to ensure homogeneous mixing before measuring volumes.
    • For kinetic studies, account for mass transfer limitations due to viscosity at lower temperatures.

If you seek a general-purpose reaction solvent, see the Reaction & Applications and Reaction Conditions sections for when 1-dodecanol is better employed as a reagent rather than solvent.

Storage and Reconstitution
  • Item-specific storage/shipping (Product Data):

    • Storage Conditions: Room temperature
    • Shipped In: Normal
  • General handling advice:

    • Solidification: With a melting point near room temperature (literature ~24–26 °C), the material may arrive as a waxy solid or viscous liquid. Warm gently (30–40 °C) to liquefy before dispensing. Avoid overheating; use a water bath or warming block.
    • Container: Store in a tightly closed, chemically compatible container (glass preferred) to minimize atmospheric moisture uptake and oxidation to aldehyde/acid traces over long storage.
    • Inerting: Not typically required, but for long-term storage of sensitive applications, consider blanketing headspace with nitrogen or argon.
  • Stability:

    • Primary alcohols are generally stable at ambient conditions away from strong oxidizers, acids, or bases. Avoid prolonged exposure to air and light if low color/odor is critical; periodic QC (acid value, GC purity) is recommended for long-term projects.
  • Reconstitution:

    • Not applicable; supplied neat. If preparing solutions, use dry, oxygen-stable solvents (e.g., toluene, 2-MeTHF, THF, EtOAc) appropriate to your application. For moisture-sensitive uses, pre-dry solvents and consider 3Å/4Å sieves in the stock solution.
  • Research Use Note: For research use only.

Structure and Identity

Overview: 1-Dodecanol (lauryl alcohol) is a linear, saturated C12 primary alcohol widely used as a hydrophobic building block and surfactant precursor.

  • Item-specific (Product Data):

    • SKU: D112298
    • CAS: 112-53-8
    • CID: 8193
    • InChIKey: 206860 (as listed; appears truncated—verify against CoA/SDS)
    • Storage Conditions: Room temperature
    • Shipped In: Normal
    • Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
    • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/computed identity (for reference; verify for your application):

    • Preferred name: 1-dodecanol; lauryl alcohol
    • Molecular formula (literature): C12H26O
    • Molecular weight (literature): 186.33 g/mol
    • SMILES (literature): CCCCCCCCCCCCO
    • InChIKey (literature): DUNYDLZPRZSQNM-UHFFFAOYSA-N
  • Structural features (general description):

    • Linear aliphatic chain of twelve sp3-hybridized carbons terminating in a primary alcohol (–CH2OH).
    • No stereocenters; achiral. No rings or unsaturation.
    • Functional group set: primary alcohol capable of hydrogen bonding (donor and acceptor), esterification/etherification, and oxidation to aldehyde/acid.
    • 2D depiction in words: a straight C12 chain with the hydroxyl at C1; remaining positions are fully saturated methylenes terminating in a methyl group at C12.
Synthetic Utility

Functional handle: primary alcohol (–CH2OH) on a C12 hydrophobe.

  • Nucleophilic O-alkylation after activation:

    • Convert to sulfonate esters (tosylate/mesylate) for SN2 with halides, azides, thiolates to access dodecyl-functional materials.
    • Appel-type halogenation (PPh3/CX4 or PPh3/I2) affords dodecyl halides for further substitution or radical chemistry.
  • Direct O-functionalization:

    • Williamson ethers: ROH deprotonated with NaH/Na/K in THF/DMF; electrophiles include primary alkyl halides and benzyl halides, enabling robust dodecyl ether formation.
    • Mitsunobu coupling creates dodecyl ethers/esters from acidic pronucleophiles with inversion at stereogenic centers (on the electrophile partner).
  • Carbonyl derivatization:

    • Oxidation to dodecanal (PCC, Swern) enables aldol, Wittig, or imine chemistry; further oxidation to dodecanoic acid provides entry to amides, acyl chlorides, and anhydrides.
    • Esterification (Fischer, Steglich, enzymatic) generates a wide range of laurate esters (plasticizers, flavors, phase modifiers).
  • Materials and interfaces:

    • The dodecyl group imparts hydrophobicity and self-assembly; grafting onto polymers, silica, or nanoparticles modulates wetting, dispersion, and interfacial energy.
  • Retrosynthetic value:

    • 1-Dodecanol is a convenient progenitor for a family of C12-functional building blocks (R–(CH2)11–X; X = OH, OAc, OTs, Cl/Br/I, N3, SR, CO2R), facilitating modular construction of amphiphiles and surface-active reagents.
Target Specificity

Not applicable. 1-Dodecanol is a small-molecule reagent and does not possess antigen/epitope specificity, clone information, or species reactivity. For target-binding biomolecules (antibodies, enzymes), consult those specific product listings.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.