Determine the necessary mass, volume, or concentration for preparing a solution.
AMPD has an effective buffering range of pH 7.8–9.7 at 25°C. This product, at pH 7.5, falls outside the optimal buffering range and exhibits weak buffer capacity. It is suitable for the separation of polypeptides in the molecular weight range of 1,500–100,000 Da in SDS-gradient gel electrophoresis systems, and can serve as a spacer medium in protein isotachophoresis. However, it is not recommended for use in alkaline phosphatase (ALP) activity assays.
Operating Procedure (For reference only):
1. Follow the specific experimental protocol as required.
Precautions:
1. Wear lab coats and disposable gloves during operation; ensure basic personal protection.
2. For research use only. Not intended for any other purposes.
3. Strictly adhere to laboratory safety protocols and select appropriate personal protective equipment (PPE) as needed based on risk assessment.
4. This product falls outside the effective buffering range of AMPD, with weak buffer capacity and susceptibility to pH fluctuations. It is suitable for electrophoresis applications only and must not be used in enzyme activity assays or other experiments that require a stable buffering system.
5. The buffering performance of this product is significantly affected by temperature. Maintain a constant temperature environment during experiments to minimize experimental errors.
6. The manufacturer assumes no responsibility for any accidents resulting from improper use of this product.
| 끓는점(°C) | 151°C |
|---|---|
| 녹는점(°C) | 108-110°C |
H315:Causes skin irritation
H319:Causes serious eye irritation
H335:May cause respiratory irritation
H412:Harmful to aquatic life with long lasting effects
H318:Causes serious eye damage
P261:Avoid breathing dust/fume/gas/mist/vapors/spray.
P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.
P273:Avoid release to the environment.
P280:Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352:IF ON SKIN: wash with plenty of water.
P321:Specific treatment (see ... on this label).
P405:Store locked up.
P501:Dispose of contents/container to an approved waste disposal plant.
P264:Wash hands [and …] thoroughly after handling.
P271:Use only outdoors or in a well-ventilated area.
P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233:Store in a well-ventilated place. Keep container tightly closed.
P362+P364:Take off contaminated clothing and wash it before reuse.
P264+P265:Wash hands [and …] thoroughly after handling. Do not touch eyes.
P305+P354+P338:IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P317:Get emergency medical help.
P337+P317:If eye irritation persists: Get medical help.
P332+P317:If skin irritation occurs: Get medical help.
P319:Get medical help if you feel unwell.
No vendor-tested biological assay protocols are specified for this item. General guidance for common uses is provided below; adjust to your system and validate empirically.
Preparing a working buffer
Electrophoresis (general)
Enzyme assays
Storage between uses
Item-specific testing (WB, IHC, IF, FC, etc.): Not applicable; no such data are provided for this buffer product.
This product is a laboratory buffer and is not intended for biological activity per se. The solute (AMPD) is a small-molecule amine/diol used to maintain solution pH; it is not an endogenous metabolite of major pathways.
Function in biology-related workflows (general)
Interactions and compatibility
In vivo relevance
Note: No medical, diagnostic, or therapeutic claims are made. For research use only (per Product Data).
Product description (item-specific): Ready-to-use AMPD buffer, 0.2 M, pH 7.5, aqueous.
Typical laboratory uses (general)
Practical guidance
Compatibility notes (general)
Quality
For an aqueous 0.2 M AMPD buffer, environmental considerations focus on choosing buffers with minimal toxicity, good biodegradability, and low interference with downstream processes. AMPD is a water-soluble, low-volatility amine-containing diol; disposal as aqueous laboratory waste is typical, following local rules.
Comparison of buffer options (general, literature):
AMPD (pKa ~8.8)
HEPES (pKa ~7.5)
MOPS (pKa ~7.2)
Tris (pKa ~8.1)
Practical guidance: Select AMPD when straightforward aqueous buffering at pH 7.5 is desired and amine reactivity is acceptable; choose Good’s buffers for tighter biological compatibility or metal-sensitive systems.
This product is supplied for research use only. The following information is general background on excipient roles of similar buffers and does not constitute a use claim for this item.
Potential excipient roles (general)
Considerations relative to other buffers
Regulatory/compendial status
Practical guidance for development studies
Item-specific note: This product is labeled for research use only and is not intended for use in diagnostic or therapeutic applications.
For the supplied item (aqueous AMPD buffer, 0.2 M, pH 7.5):
Properties of the solute (AMPD) for reference (literature values; not specifications for this solution):
Aqueous behavior (general guidance):
Note: Reported values above labeled as literature are provided for context and should not be taken as product specifications.
Item-specific grade: BioReagent, Suitable for electrophoresis.
What this means in practice
Stabilizers/preservatives
Comparison to analytical grades (general guidance)
Documentation
Primary use is as a biochemical/electrophoresis buffer. Synthetic organic reaction applications are limited, but the AMPD base (as a molecule) can function in select roles. Distinguish between buffer usage and chemical reactivity:
Buffering and electrophoresis workflows (item-relevant)
Biochemical assay context (general)
Chemical reactivity of AMPD (literature; not the intended use of this buffer product)
Practical tips for lab use of this buffer
For this item’s primary use as a buffer, “reaction conditions” are best interpreted as operational conditions for biochemical or electrophoretic workflows. Where chemical reaction data are mentioned, they are general literature notes and not directions for this product.
Biochemical operations (item-relevant)
Electrophoresis
Chemical reactivity context (literature, AMPD as reagent)
Cautions
Note: No specific reaction times, catalysts, or yields are claimed for this product; tailor conditions to your application and verify via small-scale trials.
This product is an aqueous buffer solution; solvent selection is generally not applicable beyond water compatibility. Key points for users preparing mixtures:
Polarity & miscibility
Ionic strength considerations
Comparison with alternative buffers (general)
Practical tips
Item-specific storage
Reconstitution
Handling
Shelf life/quality control
Container/materials compatibility
Research use note
This product is an aqueous AMPD buffer prepared at 0.2 M, pH 7.5 (research use). The solute is 2-amino-2-methyl-1,3-propanediol (AMPD), provided here as a defined buffer solution.
Item-specific facts (from Product Data)
Structure of solute (literature; describes AMPD, not the aqueous solution)
Notes
While this product is an aqueous buffer intended for biochemical workflows, the underlying solute (AMPD) is an amino diol with useful chemical reactivity (literature context only):
Functional group handles
Ligand/templating behavior
As a base/organocatalyst (limited)
Retrosynthetic perspective
Caveat: None of the above is the intended application for this item as sold. If using AMPD for synthesis, source the neat solid with appropriate grade; the present product is a 0.2 M aqueous solution designed for buffering.
Not applicable. This product is a chemical buffer solution and is not an antibody, enzyme, or oligonucleotide. No target, epitope, clone, species reactivity, or isotype applies.
당사의 등급 선택 가이드는 카탈로그의 모든 변형 제품에 대해 순도, 안정제 상태 및 용도 적합성을 다룹니다.
BioReagent 등급 가이드 보기 → Suitable for electrophoresis 등급 가이드 보기 →