Determine the necessary mass, volume, or concentration for preparing a solution.
This kit employs a sandwich enzyme-linked immunosorbent assay (ELISA) for the quantitative detection of Human Adiponectin/Acrp30 concentration in samples. The Human Adiponectin/Acrp30 capture antibody is pre-coated onto the microtiter plate. Upon addition of samples or standards, Human Adiponectin/Acrp30 present therein binds to the immobilized capture antibody, while other unbound components are removed through washing. Subsequently, a biotin-conjugated detection antibody specific for Human Adiponectin/Acrp30 is added. This antibody binds to the captured Human Adiponectin/Acrp30, forming a "sandwich" immunocomplex. Any excess, unbound material is again removed by washing. Next, an enzyme conjugate (typically Streptavidin-Horseradish Peroxidase, SA-HRP) is added. The biotin on the detection antibody and streptavidin on the enzyme conjugate exhibit high-affinity binding, thereby linking the HRP enzyme to the immunocomplex. Following another wash step to remove unbound conjugate, a colorimetric substrate (e.g., TMB) is added. If Human Adiponectin/Acrp30 is present in the sample, the HRP linked to the complex catalyzes the oxidation of the colorless substrate, yielding a blue product. The reaction is then stopped by adding a stop solution (usually an acid), which changes the color from blue to yellow. The optical density (OD) of each well is measured at 450 nm using a microplate reader. The concentration of Human Adiponectin/Acrp30 is directly proportional to the OD450 value. A standard curve is generated by assaying known concentrations of Human Adiponectin/Acrp30, and the concentration of Human Adiponectin/Acrp30 in unknown samples is interpolated from this curve based on their OD values.
당사의 등급 선택 가이드는 카탈로그의 모든 변형 제품에 대해 순도, 안정제 상태 및 용도 적합성을 다룹니다.
BioReagent 등급 가이드 보기 →