Bile Liquid Medium - BioReagent

Cat. No.: B1528561

등급 & 순도 BioReagent

Storage

Room temperature

Shipped In

Normal

개요

For confirmation and cultivation of Enterococcus faecalis

사양

사양 및 순도

BioReagent

보관 조건

Room temperature

배송

Normal

등급

BioReagent

Product Line

생물 제품

Application Protocols

The exact, validated protocol depends on your method and the medium’s specification. Below is general guidance for using a sterile bile-containing liquid medium; adapt per your SOP and consult the CoA/Spec Sheet for this item.

• Example workflow (general, not item-specific)

  1. Preparation: If received ready-to-use and sterile, bring to room temperature and mix gently. If sterilization is required, follow your SOP (e.g., autoclave if formulation allows; add heat-labile supplements by sterile filtration post-sterilization).
  2. Inoculation: Transfer a defined inoculum (e.g., 10–1000 CFU/mL or per method) into sterile containers containing medium. Include uninoculated controls and positive/negative control strains.
  3. Incubation: Incubate under organism-appropriate temperature and atmosphere. For aerobic growth, loosen caps or use breathable closures; for anaerobes, use sealed, reduced-oxygen systems.
  4. Monitoring: Assess growth by turbidity, OD600, or plating for CFU. For differential tests (if indicators/carbohydrates are present), read endpoints at method-defined times.
  5. Confirmation: Where selectivity is used for detection, confirm presumptive positives by subculture to differential agar or by biochemical/molecular identification.
  6. Disposal: Autoclave spent cultures before disposal in accordance with biosafety procedures.

• Notes

  • Do not assume compatibility of antibiotics, dyes, or organic additives; validate before use.
  • Record lot number and reference the CoA for performance acceptance criteria.

Biological Roles

This product is a culture medium; it does not play a biological role in vivo. However, its functionality derives from biologically active components that influence microbial physiology.

• General context (not item-specific)

  • Bile salts are amphipathic detergents that solubilize membrane lipids. Many Gram-positive bacteria are sensitive to bile; conversely, enteric and other bile-tolerant organisms possess efflux systems, membrane adaptations, and stress responses enabling growth in the presence of bile.
  • In culture media, bile components create selective pressure that enriches for bile-tolerant taxa from mixed communities, facilitating isolation or detection.
  • Nutrient bases (e.g., peptones) support growth, while optional indicators or carbohydrates enable differential readouts (acid production, gas formation) when present in specific formulations.

• Experimental implications

  • Exposure to bile can induce stress-response regulons and alter expression of virulence or metabolism genes in some organisms. When interpreting phenotypes measured in bile-containing media, consider bile as a regulatory cue, not just a selective agent.

Note: The exact composition and concentrations of bile salts, nutrients, and any indicators for this item are not specified; consult the CoA/Spec Sheet for definitive details.

Buffer Applications

This product is a selective culture medium rather than a defined buffering reagent. While media contain buffering capacity to maintain pH during growth, it is not typically used as a standalone buffer system for biochemical assays.

• Item-specific note: Buffer composition, pH set point, and capacity are not specified for this item; refer to CoA/Spec Sheet.

For dedicated buffering needs (enzyme assays, chromatography, electrophoresis), select a defined buffer system with known pKa and ionic strength appropriate to your application.

Green Alternatives

While aqueous culture media are inherently water-based, environmental impact arises from energy for sterilization, cold-chain logistics, and single-use plastics. The following considerations can reduce footprint without altering microbiological performance.

• Item status

  • Shipped: Normal conditions (per product data). Storage: Room temperature. These already help minimize cold-chain emissions.

• Greener practice options (general guidance)

  • Concentrates and on-site dilution: When available as a concentrated sterile solution or dehydrated powder, prepare only the required volume to reduce waste. For this item, the supplied form is liquid; composition details are not specified—consult CoA.
  • Sterilization strategy: Use validated filtration for heat-labile components to avoid repeated autoclave cycles. Batch-prepare to maximize autoclave load efficiency.
  • Packaging: Choose returnable/recyclable glass where permitted by your biosafety system; consolidate orders to reduce packaging waste.
  • Reuse of accessories: Employ reusable stainless or glass cultureware instead of disposable plastics when sterility assurance can be maintained.

• Trade-offs

  • Concentrates and powders reduce shipping mass but require precise water quality control (TOC, endotoxin, resistivity). Ready-to-use liquids minimize operator variability but increase packaging and transport volume.

Pharmaceutical Uses

No therapeutic or clinical use is intended. For research use only (per product data).

• General laboratory/QA contexts (not item-specific)

  • May be employed in pharmaceutical and allied industry microbiology laboratories for environmental monitoring, raw material testing, or process hygiene studies when a bile-containing selective medium is specified in an internal or compendial method.
  • Method alignment: If following pharmacopeial or regulatory methods, verify that the medium’s formulation, performance criteria, and growth promotion tests meet the specified standard. Composition and performance for this item are not specified here; consult the CoA/Spec Sheet and your method.

• Excipient/formulation role: None. This is not an excipient and is not intended for administration.

Physical Properties

Item-specific physical data for this lot are not provided.

• Item-specific values

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • pH, osmolality, conductivity: Not specified for this item; refer to CoA/Spec Sheet.
  • Density/viscosity/refractive index: Not specified for this item; refer to CoA/Spec Sheet.
  • Sterility status/bioburden/endotoxin: Not specified for this item; refer to CoA/Spec Sheet.

• General/literature context for bile-containing liquid media (not item-specific)

  • Matrix: Aqueous, typically clear to slightly opalescent depending on composition and sterilization.
  • Typical pH range at 25 °C for many bile-based culture media is near neutrality; the exact target and tolerance depend on the formulation and intended organism group.
  • Solubility: Fully miscible with water; not intended for miscibility with organic solvents.
  • Thermal behavior: Intended for incubation in the biological range; autoclave stability depends on formulation (some supplements are heat-labile and are filter-sterilized and added aseptically post-sterilization).

Always confirm exact specifications (pH set point, sterility method, supplements, and compatibility) from the product’s CoA/Spec Sheet before critical applications.

Quality and Grades

• Item-specific quality

  • Grade: BioReagent (as provided). This denotes suitability for biological research applications, prepared and handled to support reliable performance in microbiology or cell-based workflows.
  • Storage: Room temperature (per product data). Shipped under normal conditions.

• What BioReagent grade implies (general guidance)

  • Consistency: Batch-to-batch control for critical parameters such as composition, pH set point, and performance characteristics (e.g., selectivity, growth support), verified by internal QC assays.
  • Low contaminant background: Formulated to minimize inhibitory impurities and microbial contamination prior to use; sterility/bioburden status should be verified on the CoA/Spec Sheet for this lot.
  • Documentation: A Certificate of Analysis typically details appearance, pH (if applicable), sterility or bioburden, and performance tests using reference strains.

• Practical notes for users

  • If your application requires specific performance (e.g., recovery of stressed cells, bile tolerance tests, differential reactions), verify that the lot’s QC organisms and acceptance criteria match your method.
  • If media are supplemented (e.g., carbohydrates, indicators, antibiotics), confirm whether supplements are included or must be added aseptically post-sterilization. For this item, exact composition/supplement status is not specified; refer to CoA/Spec Sheet.

Reaction and Applications

As a biological culture medium, this product is not used for synthetic chemical reactions. Its “applications” pertain to microbiology workflows.

• Typical applications for bile-containing liquid media (general, not item-specific)

  • Enrichment and selective cultivation of bile-tolerant organisms from mixed samples by exploiting the detergent action of bile components.
  • Phenotypic assays of bile tolerance or growth in the presence of bile salts.
  • Quality control testing in food/water/microbiological labs when the method calls for a bile-based medium (method- and formulation-dependent).

• Practical considerations

  • Inoculum size and physiological state of cells strongly affect recovery in selective media; consider pre-enrichment on non-selective media for stressed samples.
  • Aeration: For facultative anaerobes, shaking at moderate speeds can improve growth; for strict anaerobes, use sealed, reduced-oxygen systems as appropriate.
  • Supplements: Carbohydrates, indicators, or antibiotics may be added where protocols specify; add aseptically and confirm compatibility with bile components.

• Verification and controls

  • Include positive-control strains known to grow in bile-containing media and negative-control strains to verify selectivity.
  • Record lot number and verify the CoA/Spec Sheet for pH, sterility, and performance criteria relevant to your method.

Reaction Conditions

Not applicable to chemical reactions. For microbiological use, the relevant “conditions” are incubation parameters. Because composition and intended organisms for this item are not specified, only general guidance is provided below.

• General incubation guidance (not item-specific)
  • Temperature: Select based on organism physiology (commonly 30–37 °C for mesophiles; others per method). Validate conditions with control strains.
  • Atmosphere: Aerobic shaking for facultative aerobes; reduced oxygen or anaerobic systems as required for strict anaerobes.
  • Inoculation density: Use standardized inocula to enable comparative growth assessments (e.g., McFarland standards or CFU-based dilutions).
  • Time: Monitor growth kinetically (OD, CFU, or qualitative turbidity) and avoid over-incubation when differential endpoints are time-sensitive.

For method-critical parameters (pH set point, bile salt concentration, supplements), refer to the product CoA/Spec Sheet and your validated protocol.

Safety and Handling

• Regulatory/GHS status (item-specific)

  • Signal word, H-statements, GHS classification, pictograms: Not specified for this item; refer to SDS.

• General laboratory safety (not item-specific; follow institutional biosafety policies)

  • Treat all culture media as potentially biohazardous after contact with microorganisms. Use appropriate Biosafety Level (BSL) practices for the organism under study.
  • Personal protective equipment: Lab coat, gloves, and safety glasses as minimum PPE. Employ biological safety cabinet (Class II) for aerosol-generating manipulations of risk group organisms.
  • Incompatibilities: Avoid contamination with incompatible disinfectants or strong oxidizers if the medium will be used for viability assays; chemical residues can inhibit growth.
  • Sterilization and decontamination: Non-inoculated medium can typically be autoclaved for disposal per facility guidelines. Inoculated media should be autoclaved prior to disposal. Do not autoclave sealed containers without pressure relief.
  • Spill/Exposure: For spills of uninoculated medium, wipe up with absorbent and detergent; for inoculated medium, apply appropriate disinfectant (e.g., freshly prepared 10% bleach), allow suitable contact time, then clean. Skin/eye contact with supplements/dyes (if present) should be rinsed with water; seek medical attention per SDS.

Always consult the product SDS for authoritative hazard, first-aid, and disposal guidance.

Solvent Selection

This product is an aqueous liquid culture medium. Conventional solvent selection is not typically applicable.

• Item-specific note

  • Matrix: Water-based (typical for liquid media). Exact composition and any supplements are not specified for this item; refer to CoA/Spec Sheet.

• Practical guidance (general)

  • Compatibility: Avoid adding organic co-solvents unless your protocol explicitly validates their non-inhibitory levels; organic solvents can suppress microbial growth and alter selectivity.
  • Supplementation: If adding heat-labile supplements (e.g., carbohydrates, indicators, antibiotics), filter-sterilize and add aseptically after any heat sterilization step.
  • Containers: Use sterile, low-binding plastics or borosilicate glass; ensure caps allow gas exchange when required by the organism.

• When to choose a bile-containing liquid medium (general)

  • Select when selection/enrichment for bile-tolerant organisms is desired or when inhibition of many Gram-positive bacteria is required. For non-selective recovery, opt for a balanced nutrient broth without bile components.

Storage and Reconstitution

• Item-specific storage conditions

  • Storage: Room temperature (per product data). Protect from contamination. Avoid prolonged exposure to elevated heat or direct sunlight that could degrade sensitive components.
  • Shipping: Normal conditions (per product data).

• Stability/handling

  • Sterility status, shelf life, and pH set point are not specified for this item; refer to CoA/Spec Sheet.
  • If container is supplied sterile, maintain aseptic technique after opening. Consider aliquoting into sterile vessels to minimize repeated opening.
  • Mix gently before use to ensure homogeneity; avoid vigorous foaming that can denature proteins if present.

• Reconstitution

  • As a liquid medium, reconstitution is typically not required. If concentrates or supplements are provided separately for your lot, follow the CoA or method for dilution and aseptic addition.

• Freeze–thaw guidance

  • Unless specified by the manufacturer, avoid freezing ready-to-use media, as repeated freeze–thaw can precipitate components or reduce performance. If freezing is recommended for this item, the CoA/Spec Sheet will provide instructions.

Always consult the CoA/Spec Sheet for lot-specific sterility, shelf-life, and handling directions.

Structure and Identity

This product is a prepared culture medium rather than a single defined chemical entity. As such, conventional small‑molecule identifiers do not apply.

• Item-specific identifiers

  • Product name: Bile Liquid Medium (SKU: B1528561)
  • Grade: BioReagent
  • CAS, CID, InChIKey, SMILES, molecular formula, molecular weight: Not specified for this item; refer to CoA/Spec Sheet.

• Nature of material (general knowledge)

  • Complex, water-based medium typically comprising an aqueous matrix with nutrient sources and bile components (e.g., bile salts) that impart selective pressure against many Gram-positive organisms while permitting growth of bile-tolerant microbes. Exact composition and concentrations vary by formulation/vendor.

• Structural depiction (context)

  • Not applicable; the product is a mixture. If component-level structures are needed (e.g., sodium cholate, taurocholate, peptones), consult the specific formulation or CoA to identify constituents.

• Functional characteristics (general knowledge)

  • Selective/differential potential derives from amphipathic bile constituents that disrupt susceptible cell membranes; nutrient sources support growth of tolerant organisms. The medium’s selectivity, osmolarity, and pH depend on the precise recipe.

Synthetic Utility

Not applicable. This product is a biological culture medium and is not used as a reagent or building block in chemical synthesis. For synthetic chemistry guidance, refer to solvent/reagent products with defined molecular identity and reactivity.

Target Specificity

Not applicable. This product is not an antibody, probe, or targeted binding reagent. Any “selectivity” arises from the medium’s bile components and overall formulation, which favor growth of bile-tolerant organisms (general knowledge). Exact selectivity profile for this item is not specified; refer to CoA/Spec Sheet and method performance tests.