Circularization Kit For MGI - 16 rxns, high purity

Cat. No.: C666001

개요

Products content 

Box 1: Circularization reagent
C666001	Component	16 T	Storage
C666001A	Splint Oligo	20 μL	-20℃.Avoid freeze/thaw cycle.
C666001B	5×Splint Buffer T4	250 μL	-20℃.Avoid freeze/thaw cycle.
C666001C	DNA Ligase	50 μL	-20℃.Avoid freeze/thaw cycle.
C666001D	Digestion Buffer	20 μL	-20℃.Avoid freeze/thaw cycle.
C666001E	Digestion Enzyme I	70 μL	-20℃.Avoid freeze/thaw cycle.
C666001F	Digestion Enzyme III	25 μL	-20℃.Avoid freeze/thaw cycle.
Box 2: Magnetic Beads for DNA Purification and Recovery
C666001	Component	16 T	Storage
C666001G	CMPure	4×1.5 mL	2-8℃

Products Introduction

The Cyclization Kit is a modular kit tailored for the MGI high-throughput sequencing platform. With this kit, PCR products after junction ligation can be prepared into single-stranded circular DNA libraries suitable for MGI sequencers. All reagents provided in the kit have been subjected to stringent quality control and functional validation to maximize the stability and reproducibility of library construction.

Provide your own instruments, reagents and consumables

1. Magnetic frame: DynaMagTM-2 (Cat. No. 12321D) is recommended.

2. "Qubit" 3.0 Fluorescence Quantimeter (ThermoFisher, Cat. No. Q33216)

3. Qubit" ssDNA Assay Kit (Invitrogen, Cat. No. Q10212)

4. Anhydrous ethanol, EB (10 mM Tris-HCl, pH 8.0), NF Water (pH between 7.0 and 8.0).

5. reaction tubes: low adsorption PCR tubes with 1.5 mIEP tubes are recommended: 5.

Tip: It is recommended to use a high quality filter tip to prevent contamination of kits and libraries.  

Pre-experiment Preparation and Important Notes

 1. Sample preparation.

PCR product: 2330 ng total (total amount when multiple PCR products are mixed) in a volume of 49 pL (if the volume of PCR product is insufficient, add NF Water to bring the total volume to 49 pl). -PCR product: Fragment size: The fragment peak is between 200-500 bp. -PCR product fragment size: Fragment peaks between 200-500 bp. -PCR product modification: Fixed sequences (with Index) for MGISEQ-2000, MGISEQ-200 and BGISEQ-500 sequencing platforms were added.

2. Reagent preparation

-Remove the corresponding reagents from the kit, centrifuge briefly, and place the enzyme mixture on ice until ready to use: buffers need to be dissolved at room temperature before use, then centrifuged with shaking and placed on ice until ready to use, and NF Water and EB are placed at room temperature until ready to use: "Please make up the mixture on ice:

Precipitation may appear after the buffer in the kit is dissolved, the precipitation does not affect the function of the reagent, please shake and mix well until the precipitation disappears and then use.

Schematic diagram of the cyclization process  

procedure

cyclize

  1. 1 wl of Splint Oligo was added to the 49JI PCR product. The product was denatured and incubated on a PCR instrument at 95°C for 3 min, then immediately transferred to an ice bath and allowed to stand for 2 min.

2.  The reaction mixture was prepared on ice according to the following system.

3. Add 15ul of the above reaction mixture to 50μl of denatured DNA.

4. Place the above PCR tubes on the PCR instrument under the following conditions Reaction.

 

digest

1. Prepare the digestion reaction solution on ice according to the following system.

2. After the cyclization reaction, add 8l of digestion reaction solution directly to the cyclization system, mix well, centrifuge briefly and then place the PCR tube on the PCR instrument and react under the following conditions.

3. Purification was carried out immediately after the reaction.

Purification of digestive products

1. Remove CMPure at room temperature 30 minutes prior to use and mix well with shaking.

2. Transfer the digested product to a 1.5 mIEP tube, pipette 340 pICMPure into the digested product, mix well by gently blowing 10 times with a pipette and incubate for 10 minutes at room temperature.

3. Instantaneous centrifugation, place the EP tube on a magnetic rack and let stand for 5 minutes until the liquid is clear, pipette and discard the supernatant.

4. Keep the EP tube fixed on a magnetic rack, add 250ul of freshly prepared 80% ethanol, let it stand at room temperature for 1 minute, then carefully discard the supernatant.

5. Repeat step 4 once, try to suck up the liquid at the bottom of the tube: Note: Do not suck up the magnetic beads, so as not to affect the yield.

6. Keep the EP tube fixed on the magnetic rack, open the cap and dry it at room temperature for 5-10 minutes.

7. Remove the EP tube from the magnetic rack, add 35ul of EB or NF Water for DNA elution, pipette blow to mix and dissolve at room temperature for 10 min.

8. Centrifuge instantaneously, place the EP tube on a magnetic rack and let stand for 2 minutes until the liquid is clarified, transfer the supernatant to a new EP tube. -Store at 20C and leave to prepare DNB.  

보관 및 배송

보관 조건

Store at 2-8°C,Store at -20°C

배송

Ice chest + Ice pads

자주 묻는 질문

How should this product be stored?

Store at ?20 °C. Refrigerated storage is required to maintain the specified shelf life.

How is this product shipped?

This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.

What documentation is provided?

Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.