등급 & 순도BioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
리뷰
고객 리뷰
Application Protocols
The following are literature-based guidelines for Corn Meal Agar Medium. Always follow the instructions on the product label/CoA for authoritative preparation details.
Reconstitution and sterilization (literature guidance):
Disperse the indicated mass of dehydrated medium in purified water (grams-per-liter per product label; Not specified for this item; refer to CoA/Spec Sheet).
Heat with agitation to dissolve completely; bring to a brief boil to ensure agar hydration.
Adjust pH only if directed by the CoA; avoid overadjustment.
Sterilize by autoclaving at 121 °C for 15 minutes (typical for agar media; literature).
Cool to 45–50 °C and pour into sterile Petri dishes or tubes for slants/deeps.
Inoculation and incubation (literature/general):
Allow plates to dry (surface moisture minimized) before use.
Streak or spot inoculate fungi/yeasts; for morphology studies, low inoculum density helps resolve features.
Incubate at 22–30 °C; examine daily for 2–5 days. For Candida chlamydospores, 24–72 h at ~25–28 °C is commonly used.
Optional: For enhanced chlamydospore formation, some protocols add a small amount of surfactant (e.g., Tween 80) to CMA; follow institutional SOPs.
Quality control organisms (literature examples; for performance verification only):
Candida albicans (expected: chlamydospore formation under suitable conditions)
Aspergillus niger or Penicillium spp. (expected: characteristic conidiation)
Biosafety: Handle all cultures per institutional biosafety level guidelines; disinfect and autoclave used materials before disposal.
Biological Roles
As a culture medium, Corn Meal Agar Medium provides nutrients and a semi-solid matrix to support growth and morphological differentiation, primarily of fungi and yeasts.
Intended organisms (literature/general): Filamentous fungi and yeasts, notably used for the observation of chlamydospore formation in Candida albicans and for hyphal/conidial morphology in molds.
Rationale:
Corn meal infusion supplies a modest level of carbohydrates, nitrogenous compounds, vitamins, and minerals, promoting growth without the high sugar content that can repress certain developmental pathways.
Agar gel offers a firm, low-reactivity surface facilitating colony morphology, micromorphology, and slide culture observations.
Typical observations enabled (literature):
Formation of chlamydospores, pseudohyphae, and true hyphae in yeasts.
Conidiation patterns and pigmentation in molds at 22–30 °C.
Use context: Research workflows in mycology, environmental microbiology, food/industrial microbiology QC, and teaching laboratories. No medical/clinical diagnostic claims are made for this product.
Buffer Applications
Not a buffering reagent. Corn Meal Agar Medium does not function as a defined buffer system.
Note: Prepared CMA has an intrinsic pH (literature-typical near 6–6.5), but its role is nutrient provision and gelling, not precise pH buffering.
For pH control in culture, dedicated buffers (e.g., phosphate, MOPS) are recommended according to organismal needs.
Green Alternatives
Although Corn Meal Agar Medium is not a solvent or synthetic reagent, sustainability considerations still apply to media preparation.
Resource considerations (general):
Plant-derived infusion and agar are renewable biomaterials.
Dehydrated format minimizes transport of water, reducing shipping mass/volume compared with ready-to-use plates.
Lab practice to reduce environmental impact:
Prepare only the volume needed; store excess molten medium at 45–50 °C briefly rather than repeated remelting cycles.
Use autoclave load optimization (full loads, correct cycle) to reduce energy per unit sterilized.
Prefer reusable glass media bottles and Petri dishes where biosafety policies allow; validate cleaning/sterilization.
Comparison to alternatives (literature/general):
CMA vs PDA/SDA: CMA typically contains fewer refined sugars; it can reduce excessive biomass while allowing morphological features, potentially lowering repeated subculturing and waste for identification workflows.
Ready-made plates vs dehydrated media: Dehydrated media reduce packaging waste and cold-chain requirements; trade-off is on-site energy for sterilization.
Pharmaceutical Uses
No therapeutic or clinical diagnostic use is claimed. For research use only (per Product Data).
Relevant non-clinical contexts (general):
May be used in microbiological quality investigations in R&D settings, e.g., characterization of fungal isolates, morphology studies, or environmental monitoring research.
Training and method development in pharmaceutical microbiology labs where understanding of fungal morphology is required.
Compliance note: For regulated QC/QA release testing, media must meet compendial specifications and validated performance criteria. Item-specific compliance to pharmacopeial monographs is not specified for this item; refer to CoA/Spec Sheet and institutional validation requirements.
Physical Properties
Item-specific numerical specifications are not provided for this product.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Solubility: Readily disperses in water; agar components hydrate and dissolve on heating (literature, general for agar media)
pH (prepared medium): Typically around 6.2 ± 0.2 at 25 °C (literature, typical for CMA; not a specification for this item)
Gel strength: Depends on agar content and preparation (literature); not specified for this item
Melting/boiling points, density, refractive index, logP, pKa: Not applicable to a dehydrated complex medium; not specified for this item
Practical notes (general/literature):
Agar gels melt near 85–90 °C and solidify at ~32–40 °C depending on composition and concentration (literature, general for agar).
Complete dissolution usually requires heating to near boiling with agitation; avoid scorching.
Final clarity/opalescence varies with corn infusion load; CMA is often slightly opalescent to translucent (literature).
Quality and Grades
Grade: BioReagent (as provided in Product Data)
Meaning (general): Suitable for laboratory biological applications, including culture media preparation and routine microbiology workflows. Not intended for clinical diagnostics or therapeutic use.
Item-specific quality attributes: No additional specifications (e.g., microbial limits, pH range, gel strength) are listed in the Product Data. Not specified for this item; refer to CoA/Spec Sheet.
Implications for use:
BioReagent-grade dehydrated media are formulated for reproducible microbial growth, minimizing lot-to-lot variability within the constraints of an undefined plant infusion.
For sensitive phenotypic assays (e.g., morphology/chlamydospore formation), verify lot performance with control strains.
Documentation: For precise composition, recommended grams-per-liter, and QC organisms, consult the CoA/Spec Sheet. These define the authoritative preparation and acceptance criteria for this SKU.
Reaction and Applications
This section is not typically applicable to a microbiological medium. Corn Meal Agar Medium is not used as a reagent in synthetic organic or inorganic reactions.
Relevant applications (instead): Microbiological culture of fungi/yeasts and morphological studies. See Biological Roles and Application Protocols for practical usage.
Reaction Conditions
Not applicable to chemical reactions. For microbiological preparation and incubation conditions, see Application Protocols.
Safety and Handling
GHS/label elements are not provided in the Product Data for this item. Always consult the product SDS for authoritative safety information.
Signal word / H-statements / pictograms / GHS classification: Not specified for this item; refer to SDS.
General hazards (literature/practice):
Dehydrated media can produce dust; may cause mechanical eye irritation or respiratory discomfort.
Hot media pose thermal burn risks; molten agar (~50–100 °C) can cause severe burns.
Recommended PPE: Lab coat, safety glasses/goggles, heat-resistant gloves when handling hot media; particulate mask if dust generation is likely.
Handling: Avoid generating dust; prepare in well-ventilated area; use appropriate glassware for autoclaving.
Incompatibilities: Avoid strong oxidizers and strong acids/bases that can degrade carbohydrates/proteins (general). Do not tightly seal flasks during autoclaving (pressure hazard).
First aid (overview; refer to SDS):
Inhalation of dust: Move to fresh air; seek medical advice if symptoms persist.
Eye contact: Rinse cautiously with water for several minutes; remove contact lenses if present and easy; seek medical attention for persistent irritation.
Skin contact (hot media): Cool burn under running water; do not peel adhered agar; seek medical attention.
Waste: Dispose of in accordance with institutional biosafety procedures. Autoclave plates/broths after microbial use before disposal.
Solvent Selection
This product is a dehydrated culture medium intended to be reconstituted in water.
Primary solvent: Purified/deionized water (Type II or better recommended for microbiology; literature/practice)
Miscibility: Fully miscible in water upon heating; agar requires near-boiling temperatures to dissolve uniformly (literature).
Practical guidance:
Use freshly prepared, oxygenated water for optimal microbial growth.
Avoid high-ionic-strength or heavily buffered waters that can alter the intended medium characteristics (osmolarity, pH, gel strength).
When to choose CMA vs alternatives (general):
CMA is preferred for morphological differentiation of fungi and yeasts, especially chlamydospore formation, over richer sugar media that may suppress certain structures. For general fungal enumeration or robust growth, PDA (Potato Dextrose Agar) or SDA (Sabouraud Dextrose Agar) may be selected instead (literature).
Storage and Reconstitution
Storage conditions (as provided): Room temperature. Keep container tightly closed in a dry place. Protect from moisture and excessive heat.
Shipping: Normal, per Product Data.
Shelf-life: Not specified for this item; refer to CoA/Spec Sheet. Use by the labeled expiry date.
Reconstitution:
Concentration (g/L), target pH, and detailed preparation are not specified for this item; refer to CoA/Spec Sheet.
General practice (literature): Suspend the indicated mass in purified water, heat to dissolve, autoclave (121 °C, ~15 min), cool to 45–50 °C, and pour plates under aseptic conditions.
Storage of prepared medium (general): Typically 2–8 °C in sealed stacks/bags to minimize desiccation and contamination; use within a few weeks depending on sterility and dehydration. Avoid repeated melt-freeze cycles.
Freeze–thaw: Not applicable to dehydrated medium; avoid freezing prepared agar plates to prevent cracking and syneresis.
Structure and Identity
Corn Meal Agar Medium (CMA) is a dehydrated, microbiological culture medium, not a single defined molecule. It is an undefined mixture derived from corn meal infusion and agar as the gelling agent.
Product type: Complex, undefined microbiological medium (plant infusion + agar)
Agar (mixture of agarose/agalactan polysaccharides) providing a firm gel matrix
Molecular formula: Not applicable (complex mixture)
Molecular weight: Not applicable (complex mixture)
SMILES / InChI / InChIKey: Not applicable (mixture)
2D structural description: Not a single structure; comprises polysaccharides (linear and branched galactans) and a variety of small biomolecules extracted from corn
Synonyms (general use): CMA; Corn Meal Agar; Cornmeal agar
Item-specific identifiers from Product Data:
SKU: C1528480
Grade/Purity: BioReagent
Category: Life science (生命科学)
Research use: For research use only
Synthetic Utility
Not applicable. Corn Meal Agar Medium is not a building block or reagent for chemical synthesis.
See Biological Roles and Application Protocols for its intended microbiological utility.
Target Specificity
This section is typically reserved for antibodies or affinity reagents. It does not apply to a culture medium.
Organismal preference (literature/general): CMA is broadly permissive for fungi/yeasts and is favored for morphological differentiation such as chlamydospore formation in Candida albicans. This is not an exclusive selectivity but a practical preference based on nutrient profile.
등급 선택에 도움이 필요하신가요?
당사의 등급 선택 가이드는 카탈로그의 모든 변형 제품에 대해 순도, 안정제 상태 및 용도 적합성을 다룹니다.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.