DBCO-Dextran is a dibenzocyclooctyne-modified dextran with excellent click chemistry activity and biocompatibility, which can be used in cancer immunotherapy and bioimaging research.
사양
보관 조건
Store at -20°C
배송
Ice chest + Ice pads
이 제품은 콜드 체인 배송이 필요합니다.지상 및 기타 경제 서비스는 사용할 수 없습니다.
고급 데이터
인증서(CoA, COO, BSE/TSE 및 분석 차트)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
솔루션 계산기
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
리뷰
고객 리뷰
Application Protocols
Item-specific (from Product Data):
No tested-application protocols are provided for this item.
General protocols (literature/general knowledge):
Conjugation of an azide-labeled protein to DBCO–dextran (SPAAC)
Materials: DBCO–dextran, azide-protein, PBS (pH 7.4) without NaN3, optional 5% DMSO, SEC column or 30–100 kDa MWCO spin filter.
Steps:
Dissolve DBCO–dextran at 1–5 mg/mL in PBS. If slow, pre-wet with a small volume of DMSO (<10% final), then dilute with buffer.
Mix with azide-protein at a molar ratio of 1.2–2.0 DBCO per azide site (estimate DBCO sites by vendor DoS if available; otherwise titrate empirically).
Incubate 1–2 h at 20–25°C with gentle mixing. For sensitive proteins, 4–8 h at 4–8°C.
Purify conjugate by SEC (e.g., Sephadex/Sepharose) or ultrafiltration. Exchange into storage buffer.
Characterize by UV–Vis, SDS-PAGE (if appropriate), and SEC.
Hydrogel formation via bis-azide crosslinker
Prepare DBCO–dextran (5–50 mg/mL) and a water-soluble bis-azide (stoichiometric to DBCO sites).
Combine quickly; cast into molds. Gelation typically occurs within minutes to tens of minutes at room temperature. Tune modulus via concentration and DoS.
Surface grafting
Incubate azide-functional surfaces with DBCO–dextran solution (0.5–5 mg/mL) for 1–4 h, rinse thoroughly, and characterize by contact angle or XPS.
These procedures are general starting points; adjust to your system.
Biological Roles
Item-specific (from Product Data):
No biological role claims are provided. Research use only.
General context (literature/general knowledge):
Dextran is a biopolymer of glucose produced by certain bacteria; in research it serves as an inert, hydrophilic scaffold and crowding agent. Functionalization with DBCO provides a platform for bioorthogonal attachment of azide-bearing biomolecules.
Applications in biochemical studies include:
Multivalent ligand presentation to study receptor clustering and avidity.
Scaffold for attaching fluorophores, peptides, carbohydrates, or nucleic acids via SPAAC to create probes and macromolecular assemblies.
Formation of hydrogels or extracellular matrix mimics by crosslinking reactions to study cell–matrix interactions (research settings).
Cell interaction considerations: Dextran can be internalized via endocytosis/macropinocytosis in some cell types; surface charge and DoS influence uptake and protein corona formation.
Enzymatic degradation: Dextranases can cleave α-1→6 linkages; in biological matrices this can impact stability of constructs.
No clinical or diagnostic claims are made for this product. All uses should remain in vitro/in vivo research contexts consistent with institutional approvals.
Buffer Applications
Item-specific (from Product Data):
No buffer recipes or specifications provided for this item.
General guidance (literature/general knowledge):
Suitable buffers for SPAAC with DBCO–dextran: PBS, HEPES, or phosphate buffer at pH 6.8–7.8. Maintain ionic strength (e.g., 100–200 mM total salts) for protein stability when conjugating to biomolecules.
Avoid sodium azide and other azide preservatives; they irreversibly consume DBCO.
Typical working concentrations: 0.1–10 mg/mL DBCO–dextran depending on MW and application (lower for cell labeling, higher for hydrogel formation). Adjust viscosity by dilution.
Additives: 0.01–0.1% Tween-20 can reduce nonspecific adsorption to plastics (verify compatibility). 1–10% DMSO may aid solubilization for high-DoS materials before final buffer dilution.
Filtration/sterility: if needed for cell culture work, filter-sterilize solutions (0.22 μm) promptly after dissolution; avoid heat sterilization which may degrade the polymer.
While dextran itself is sometimes used to prepare density gradients or as a crowding agent, DBCO–dextran’s primary buffer relevance is as a reactive macromolecular conjugation partner in neutral aqueous media.
Green Alternatives
Context (literature/general knowledge):
SPAAC using DBCO is inherently greener relative to copper-catalyzed azide–alkyne cycloaddition (CuAAC) because it eliminates copper salts and reducing agents, reducing toxicity and waste.
Comparative options for bioorthogonal ligation:
DBCO (SPAAC): copper-free, fast kinetics with azides, good aqueous compatibility; hydrophobic and light-sensitive to some extent.
BCN (bicyclononyne): similar copper-free chemistry; often more hydrophobic, sometimes different kinetics.
DIFO/DIBO derivatives: faster SPAAC in some contexts; can be synthetically complex and hydrophobic.
Tetrazine–TCO (iEDDA): extremely rapid, but requires distinct functional pairs (tetrazine and trans-cyclooctene) and tetrazines can be less stable.
Solvent and process greenness:
Prefer water or aqueous buffers; minimize organic cosolvents. Avoid azide preservatives to prevent wasteful consumption of functional groups.
Room-temperature reactions reduce energy usage; no need for degassing or inert atmosphere.
Small comparison (general):
SPAAC (DBCO) vs CuAAC:
Catalyst: none vs Cu(I) + ligand + reductant.
Biocompatibility: high vs moderate/variable (copper cytotoxicity).
Waste: minimal salts vs copper-containing waste streams.
For this item, no alternative grades or greener formulations are specified; consult the CoA/Spec Sheet for any sustainability notes.
Pharmaceutical Uses
Item-specific (from Product Data):
Research Use Note: For research use only.
No pharmacopeial grade or excipient status is specified for this item; refer to CoA/Spec Sheet.
General context (literature/general knowledge):
Dextran as a material has historical use as an excipient (stabilizer, bulking agent) in pharmaceutical formulations, and as a matrix in controlled-release systems. However, DBCO-functionalized dextran is specialized for research conjugation chemistry and is not intended for therapeutic or clinical use unless explicitly manufactured and qualified for such purposes.
Potential formulation-related research uses:
Prototype macromolecular carriers for azide-bearing payloads to study pharmacotechnical properties in preclinical settings.
Hydrogel precursors for drug delivery research (e.g., crosslinking with bis-azides to explore release kinetics under lab conditions).
Regulatory note: Transitioning to clinical/GMP use would require defined MW distribution, DoS, impurity profiles, and compliance with relevant pharmacopeial/ICH guidelines—none of which are specified for this item.
For this catalog item, treat DBCO–dextran strictly as a research reagent. No claims are made regarding suitability as an excipient or active ingredient.
Physical Properties
Item-specific (from Product Data):
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
General properties (literature/general knowledge; polymer-conjugate):
Physical state: typically supplied as lyophilized solid or aqueous concentrate for dextran conjugates.
Solubility: dextran is water-soluble; DBCO substitution can reduce solubility modestly. Most DBCO–dextran conjugates dissolve in aqueous buffers (e.g., PBS), sometimes aided by 1–10% v/v DMSO if heavily substituted.
pH stability: dextran backbone is stable in neutral aqueous media; acid/base hydrolysis can occur at extremes (pH <3 or >11) with prolonged exposure.
Optical features: DBCO absorbs in the UV (around 300–320 nm, literature) enabling UV-based DoS estimation; it is typically non-fluorescent.
Viscosity: solutions exhibit polymer-dependent viscosity increasing with concentration and molecular mass.
LogP: not applicable to polymers; conjugate hydrophilicity dominates, though DBCO moieties are hydrophobic locally.
Melting/boiling point, density, refractive index: not meaningful for heterogeneous polymer conjugates in the conventional sense.
Important caveat:
Exact numerical values (e.g., MW distribution, DoS, extinction coefficient) are batch- and vendor-specific and are not specified for this item; refer to the CoA/Spec Sheet for definitive specifications.
Quality and Grades
Item-specific (from Product Data):
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Interpreting quality for DBCO–dextran conjugates (general guidance):
Key quality attributes typically include:
Polymer base: dextran source and nominal molecular weight (e.g., 10 kDa, 40 kDa, etc.) and dispersity (Đ) measured by SEC-MALS.
Degree of substitution (DoS): mol DBCO per mol glucose unit or per polymer chain; impacts solubility and reactivity.
Identity checks: 1H NMR (aromatic DBCO peaks), UV–Vis (DBCO absorbance), FTIR (alkyne signature), and elemental analysis (increased C/H ratio vs native dextran).
Residuals: solvents, catalysts, or linkers used in functionalization; endotoxin/bioburden if intended for sensitive bioassays.
Moisture content and ash (for polysaccharides) as manufacturing QC metrics.
Typical grades you may encounter:
Research grade: suitable for general laboratory use, no claim for GMP or clinical applications.
Low-endotoxin grade: tighter controls on endotoxin/bioburden for cell-based assays.
Stabilizers: Dextran conjugates generally require none; antimicrobial preservatives (e.g., NaN3) should be avoided if SPAAC reactivity is needed, as azide will consume DBCO.
For this item, definitive grade, DoS, and MW distribution are not specified; consult the CoA/Spec Sheet for lot-specific metrics.
Reaction and Applications
Item-specific (from Product Data):
Manufacturer Applications: Not provided.
General applications (literature/general knowledge):
Copper-free click chemistry: DBCO moieties undergo strain-promoted azide–alkyne cycloaddition (SPAAC) with organic azides under mild, catalyst-free conditions. This enables:
Conjugation to azide-labeled proteins, peptides, glycans, lipids, nucleic acids, and nanoparticles.
Formation of multivalent displays (e.g., glycan arrays on dextran) to probe avidity and cluster receptors.
Hydrogel formation by crosslinking with bis-azide linkers; tunable mechanical properties via dextran MW and DoS.
Surface modification: grafting onto azide-functionalized surfaces or, conversely, coupling azide probes to DBCO–dextran for interface engineering.
Bioorthogonal labeling: suitable for live-cell compatible reactions with azide-tagged biomolecules (e.g., from metabolic labeling), avoiding copper catalysis.
Practical tips:
Use buffers free of sodium azide; even trace azide will irreversibly consume DBCO groups.
Typical reaction conditions: pH 6–8, 20–25°C, stoichiometric or slight excess of DBCO relative to azide sites. Reactions often reach completion in 0.5–4 h depending on concentration and diffusion.
Purification: desalting columns, SEC, spin ultrafiltration (MWCO chosen to retain dextran). Monitor progress by loss of DBCO UV band and/or gain of triazole signature (NMR) where applicable.
Protect from strong light/oxidants to minimize DBCO degradation over long incubations.
Reaction Conditions
Item-specific (from Product Data):
No reaction condition specifications are provided for this item.
General SPAAC conditions with DBCO–dextran (literature/general knowledge):
Temperature: 20–25°C typical; 4°C for sensitive proteins (slower kinetics) or up to 37°C for faster rates if targets are stable.
Concentration: 10–200 μM azide equivalents vs DBCO sites; for polymer conjugates, 0.1–10 mg/mL macromolecule, adjusted to target stoichiometry.
Stoichiometry: 1.1–2.0 equivalents of DBCO per azide (or vice versa) to drive completion; excess reagent removed by SEC or ultrafiltration.
Time: 30 min to 4 h to reach high conversion at room temperature, depending on diffusion and concentrations.
Atmosphere: ambient; no copper or inert gas required.
Additives: none typically required. Small amounts of organic cosolvent (≤10% DMSO) can aid solubilization without significantly impacting rates.
Monitoring: UV–Vis (DBCO band decrease ~309–315 nm, literature), SEC profiles, or MS of the azide partner (if small molecule). For polymers, NMR integration of aromatic DBCO vs carbohydrate protons can estimate residual reactivity.
These ranges are general literature guidance; optimize empirically for your specific system and consult the CoA/Spec Sheet for any item-specific recommendations.
Safety and Handling
Item-specific hazard info (from Product Data):
GHS Classification / Signal Word / H-Statements / Pictograms: Not specified for this item; refer to SDS.
General safety guidance (literature/general knowledge):
Expected hazards: Dextran conjugates are generally considered low hazard. However, DBCO is a reactive strained alkyne that can undergo cycloaddition with azides; avoid contact with azide-containing reagents intended to remain unreacted.
PPE: laboratory coat, safety glasses, and appropriate gloves (nitrile). Avoid inhalation of powders/aerosols and contact with eyes/skin.
Handling: work in a clean area to prevent microbial contamination of aqueous stocks. Use low-binding plasticware to reduce polymer adsorption.
Incompatibilities: strong oxidizers (can degrade polysaccharides), strong acids/bases (hydrolysis of glycosidic linkages), reactive azides (will consume DBCO groups), and sodium azide preservatives if SPAAC reactivity must be preserved.
First aid (overview): rinse eyes/skin with water for 15 min upon contact; if inhaled, move to fresh air; if ingested, rinse mouth with water. Seek medical attention as appropriate. Defer to the SDS for authoritative instructions.
Environmental: prevent release of large quantities to drains; polymer solutions can increase COD/viscosity.
Waste: collect aqueous and organic solutions per local regulations; do not autoclave sealed vials.
Always consult the product-specific SDS for definitive hazard and response information.
Solvent Selection
Item-specific (from Product Data):
No solvent guidance specified for this item; refer to CoA/Spec Sheet.
General solvent compatibility (literature/general knowledge):
Primary medium: water and common biological buffers (PBS, HEPES, Tris) at pH 6.5–8.0. Dextran provides hydrophilicity; DBCO substitution can modestly decrease aqueous solubility at high DoS.
Cosolvents: if dissolution is slow, add 1–10% v/v DMSO, DMF, or ethanol, then dilute into buffer. Keep organic content ≤10–20% to maintain biocompatibility.
Polarity: overall hydrophilic macromolecule; DBCO domains are hydrophobic microenvironments that can promote weak interactions with proteins/membranes.
Degassing: not required for SPAAC (copper-free), but removing dissolved oxygen can limit oxidative degradation in long incubations.
When to choose buffers:
For biomolecule labeling and cell-compatible reactions, select isotonic buffers lacking primary amines or azides. Avoid sodium azide and high concentrations of competing nucleophiles for maximum SPAAC efficiency.
Brief comparison (general):
Water/PBS: biocompatible, ideal for SPAAC and conjugations.
HEPES/Tris: compatible; note Tris has a primary amine but does not interfere with SPAAC.
Organic-rich media: improves solubility of high-DoS materials but may denature sensitive proteins—balance accordingly.
Storage and Reconstitution
Item-specific (from Product Data):
Storage Conditions: Store at -20°C.
Shipped In: Ice chest + Ice pads.
General guidance (literature/general knowledge):
Protection: Keep dry and protect from light to preserve DBCO integrity. Desiccate lyophilized material. Minimize exposure to air and moisture during handling.
Reconstitution: Dissolve in sterile, azide-free buffer (e.g., PBS, HEPES, pH 7.2–7.6). Target 1–10 mg/mL stock solutions depending on intended use and viscosity. If needed, pre-dissolve with a small volume of DMSO (≤10% v/v final) before buffer addition.
Aliquoting: Prepare single-use aliquots to avoid repeated freeze–thaw cycles which can promote aggregation or hydrolysis.
Storage of solutions: 2–8°C for short term (days to 1–2 weeks) and -20°C for longer term. Avoid sodium azide preservatives to maintain DBCO reactivity.
Stability considerations: DBCO can slowly degrade under strong light/oxidants; store in amber vials. Dextran backbone is sensitive to strong acid/base over time—maintain near-neutral pH.
Thawing: Thaw on ice or at room temperature; mix gently to avoid foaming. Inspect for particulates or turbidity; if observed, clarify by low-speed centrifugation or 0.22 μm filtration (if compatible with application).
For definitive, lot-specific stability and reconstitution instructions, consult the CoA/Spec Sheet and SDS.
Structure and Identity
Item-specific (from Product Data):
Product Name: DBCO-Dextran (SKU: D1437112)
CAS: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES / InChI / InChIKey: Not applicable for polymeric conjugates; not specified for this item.
General description (literature/general knowledge):
DBCO-Dextran is a dextran polysaccharide (α-1→6 linked D-glucopyranose with occasional α-1→3 branches) bearing pendant DBCO (dibenzocyclooctyne) groups via linker chemistry. DBCO is a strained cyclooctyne enabling copper-free azide–alkyne cycloaddition (SPAAC).
Structural features:
Backbone: flexible, hydrophilic glucose polymer with multiple hydroxyls.
Functionalization: hydrophobic DBCO aryl-cyclooctyne moieties attached at undefined positions/degree of substitution (DoS typically vendor-specific).
Stereochemistry: dextran glucose units are stereodefined; DBCO contains fused aromatic ring(s) and a strained alkyne.
2D description in words: a repeating glucose ring chain with occasional ether-linked side arms terminating in a dibenzyl-fused cyclooctyne (DBCO) alkyne functionality available for SPAAC with azides.
Notes on identity control (general):
Characterization commonly uses 1H NMR (aromatic DBCO signals vs anomeric protons), UV–Vis (DBCO chromophore), and SEC-MALS for polymer size. Degree of substitution may be reported as mol DBCO per 100 glucose units (not specified for this item).
Synthetic Utility
Item-specific (from Product Data):
No synthetic details are provided for this item.
General synthetic utility (literature/general knowledge):
Functional handle: The DBCO strained alkyne enables rapid, catalyst-free SPAAC with organic azides to form stable 1,2,3-triazoles. This allows:
Macromolecular scaffolding: multivalent attachment of azide-bearing ligands (glycans, peptides, dyes, drugs) to a dextran backbone.
Polymer-supported synthesis: assembling libraries on a water-soluble polymer support with facile purification by ultrafiltration/precipitation.
Crosslinking: network formation using bis-azide or multi-azide crosslinkers to generate hydrogels or nanoparticle shells.
Orthogonality: SPAAC proceeds in the presence of thiols, amines, alcohols, and carboxylates with minimal side reactions, enabling late-stage diversification of complex biomolecules.
Analytical facilitation: DBCO UV absorbance allows estimation of remaining reactive sites during stepwise modifications.
Retrosynthetic value: starting from DBCO–dextran, azide counterparts (prepared via NHS–azide, halo-azide substitution, or metabolic azido-sugars) can be clicked to the scaffold under mild conditions without deprotection.
Overall, DBCO–dextran serves as a versatile, water-compatible macromolecular platform for constructing multivalent materials and bioconjugates via SPAAC.
Target Specificity
Item-specific (from Product Data):
No antibody/bioreagent targeting information provided.
Applicability:
DBCO–dextran is a chemical conjugation scaffold and does not possess inherent biological target specificity. Any “specificity” arises from azide-bearing partners that are clicked onto the dextran (e.g., azido-ligands, peptides, or antibodies supplied separately).
Therefore, this section is not typically applicable. Refer instead to Reaction & Applications and Application Protocols for practical use guidance.
자주 묻는 질문
How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.