DNS Reagent (QB/T Method) - BioReagent, Ready-to-use

Cat. No.: D1528885
주문 가능
등급 & 순도 BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Ready-to-use ? Ready-to-use — supplied pre-formulated at working concentration, no prep needed. Use to save time and reduce pipetting/dilution errors.
Storage
Protected from light,Room temperature
Shipped In
Normal
Application
Cell Metabolism
★
크기
USA
독일 (EU)*
가격
수량
100ml
D1528885-100ml
US 주문제작 · 2–4주 ·
—
US$49.90
500ml
D1528885-500ml
US 주문제작 · 2–4주 ·
—
US$156.90
Enter a quantity for the sizes you want to add.

개요

The carbon nutritional status and quality traits of plants are often assessed using sugar content as an important indicator. Monosaccharides and certain oligosaccharides (e.g., maltose) contain free aldehyde or ketone groups and possess reducing properties, thus they are classified as reducing sugars. Polysaccharides and sucrose, among others, are non-reducing sugars. Taking advantage of the fact that polysaccharides can be hydrolyzed by acid into monosaccharides, the total sugar content can be determined by measuring the monosaccharide content after hydrolysis.

DNS Reagent (QB/T Method) is prepared from sodium hydroxide, 3,5-dinitrosalicylic acid, potassium sodium tartrate, phenol, etc., with a DNS concentration of 10 g/L. It is a component of the plant total sugar and reducing sugar detection kit (nitrosalicylic acid method), references the light industry standard, and is commonly used for sugar composition detection. The detection principle is that reducing sugars are oxidized to sugar acids under alkaline conditions, while 3,5-dinitrosalicylic acid is reduced to a brownish-red amino compound. Within a certain range, the amount of reducing sugars is proportional to the color intensity of the brownish-red product. The absorbance of the brownish-red substance is measured at 540 nm, and this absorbance value exhibits a linear relationship with the reducing sugar content. The content of reducing sugars and total sugars in samples can be determined using colorimetry and a standard curve. DNS Reagent is also commonly used for the determination of enzyme activities such as pectinase, amylase, cellulase, and xylanase. This reagent is intended for research use only and is not suitable for clinical diagnosis or other applications.

Materials Required (User-Supplied):

1.Distilled water, hydrochloric acid solution, sodium hydroxide solution

2.Scissors, homogenizer or mortar and pestle, 50 mL centrifuge tubes, centrifuge, water bath or constant temperature incubator, spectrophotometer, cuvettes

Operating Procedure (For Reference Only):

1. Extraction of Reducing Sugars:

(1) Weigh 0.5–3 g of plant sample, cut into small pieces, add approximately 3 mL of distilled water, and homogenize. Transfer the homogenate to a beaker or Erlenmeyer flask. Rinse the homogenizer 2–3 times with 12 mL of distilled water and combine the washings into the same container.

(2) Incubate in a 50°C water bath for 30 min with intermittent stirring to ensure complete extraction of reducing sugars.

(3) Transfer the precipitate and extract to a 50 mL centrifuge tube and centrifuge at 4000 × g for 5 min.

(4) Retain the supernatant. Add 20 mL of distilled water to the precipitate, mix well, and centrifuge again at 4000 × g for 5 min.

(5) Retain the supernatant. Combine the two supernatants, bring the volume to 100 mL with distilled water (extraction solution), and mix well. This serves as the reducing sugar test solution.

2. Hydrolysis and Extraction of Total Sugars:

(1) Weigh 0.5–3 g of plant sample, cut into small pieces, add approximately 3 mL of distilled water, and homogenize. Transfer the homogenate to a beaker or Erlenmeyer flask. Rinse the homogenizer 2–3 times with 12 mL of distilled water and combine the washings into the same container.

(2) Add 10 mL of 6 M hydrochloric acid solution to the container, mix well, and boil for 30 min with intermittent stirring.

(3) Spot 2 drops of the hydrolysate onto a glass slide, add 1 drop of indicator solution, and check whether hydrolysis is complete. Complete hydrolysis is indicated by the absence of a blue color.

(4) After hydrolysis is complete, cool to room temperature. Add 6 M sodium hydroxide solution to adjust the pH to 7.4. Bring the volume to 100 mL with distilled water, mix well, and centrifuge at 4000 × g for 5 min or filter.

(5) Take 10 mL of the supernatant or filtrate and bring the volume to 100 mL with distilled water to obtain a 1000-fold diluted total sugar hydrolysate (extraction solution). Take 1 mL of this total sugar hydrolysate for determination of reducing sugar content.

3. Preparation of Glucose Standard Curve:

Take clean centrifuge tubes or test tubes and proceed according to the table below. Use tube No. 0 as the blank to zero the instrument. Measure the absorbance at 540 nm. Plot the absorbance values on the y-axis against the standard concentrations (mg/mL) on the x-axis to generate the standard curve.

Reagent Added
012345
Glu standard (1 mg/mL)00.20.40.60.81
Distilled water (mL)10.80.60.40.20
DNS Reagent (mL)22222.52
Distilled water (mL)99999.59
Equivalent glucose amount (mg)00.20.40.60.81
Note: After adding the DNS reagent, heat in a boiling water bath for exactly 5 minutes, then remove and cool to room temperature under running tap water.

4. Determination of Reducing Sugars:

Transfer 1 mL of the prepared reducing sugar extract or total sugar hydrolysate into a test tube, add 2 mL of DNS reagent, and proceed with the same operations as described for the standard curve. Measure the absorbance of each tube at 540 nm.

Calculation:

Reducing sugar content (%):

Reducing sugar content (%) = (C × VT) / (m × VS) × 100

Total sugar content (%):

Total sugar content (%) = (C × VT) / (m × VS) × 100 × 10 × 0.9

C = Sugar amount determined from the standard curve (mg)

VT = Volume of the extraction solution (mL)

m = Mass of the plant sample (mg)

VS = Sample volume used for the assay (mL)

Precautions:

1.Avoid repeated freeze-thaw cycles of this reagent to prevent loss of activity or efficiency. Store protected from light whenever possible.

2.Exercise caution when diluting hydrochloric acid and sodium hydroxide solutions to avoid personal injury.

3.Commercially available concentrated hydrochloric acid is typically approximately 11.6 M. It should be diluted to 6 M before use.

4.If samples cannot be assayed immediately, store at 2–8°C; they are stable for 3 days.

5.If the reducing sugar concentration of the sample is too high, dilute with distilled water and re-measure, then multiply the result by the dilution factor.

6.The total sugar calculation formula is applicable when interfering impurities are minimal and the reducing sugar content is relatively low compared to the total sugar content. The factor × 0.9 is used to account for the water consumed during hydrolysis when converting total sugars into monosaccharides.

7.For your safety and health, please wear a lab coat and disposable gloves during operation.

8.The reagent should be used as soon as possible after opening to prevent any adverse effects on subsequent experimental results.

9.This product is for research use only; any other use is strictly prohibited.

사양

사양 및 순도
BioReagent, Ready-to-use
안정성 및 스토리지
Store at RT long term (12 months). Store in the dark.
보관 조건
Protected from light,Room temperature
배송
Normal
등급
BioReagent, 바로 사용 가능
Product Line
생물 제품

고급 데이터

인증서(CoA, COO, BSE/TSE 및 분석 차트)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
화학 및 물리적 특성
감도Light-sensitive
자주 묻는 질문과 기사
솔루션 계산기
리뷰

고객 리뷰

Application Protocols

Not specified for this item; refer to CoA/Spec Sheet and the product insert for any validated QB/T method instructions, recommended dilutions, incubation times, and instrument settings. Follow your laboratory’s SOPs and validation requirements.

Biological Roles

This product is an analytical reagent mixture, not a biological molecule; it does not have intrinsic biological roles.

Literature context for what it detects: • Reducing sugars are central metabolites in carbohydrate metabolism (glycolysis, pentose phosphate pathway) and act as energy sources and structural precursors in cells. • The DNS reaction tracks formation or presence of reducing ends, which arise during enzymatic hydrolysis of polysaccharides (e.g., cellulases, amylases) and during glycan remodeling. • In enzymology, DNS readouts provide indirect measures of enzyme activity (rate of reducing end formation) for glycosidases and polysaccharide‑degrading enzymes.

No clinical or therapeutic claims are made or implied for this product. For research use only (Product Data).

Buffer Applications

DNS Reagent is not a buffering system; it is a formulated colorimetric reagent. It is typically used as supplied without additional buffering. If buffer exchange is needed for samples (to reduce interferences), select low‑reducing, low‑amine buffers (e.g., carbonate, phosphate) at concentrations compatible with the method, and validate blank corrections (literature guidance). No buffer recipes are specified for this item; refer to CoA/Spec Sheet.

Green Alternatives

DNS reagents offer robustness but involve nitroaromatic chemistry and hot alkaline conditions. Depending on project goals, consider greener or safer analytical alternatives. The choice depends on matrix, detection needs, and waste profile.

Comparison (literature):

• DNS (QB/T style)

  • Pros: Broad sugar coverage; high sensitivity; tolerant of many matrices; inexpensive.
  • Cons: Nitroaromatic component; hot alkaline heating; colored waste; potential interferences from strong reductants.

• PAHBAH (p‑hydroxybenzhydrazide) assay

  • Pros: Good sensitivity for reducing sugars; milder than copper‑based assays; works at ~70–100°C.
  • Cons: Hydrazide handling; reagent stability considerations; different response factors.

• BCA reducing sugar adaptations

  • Pros: Aqueous copper–bicinchoninate chemistry; strong color at 562 nm; microplate‑friendly.
  • Cons: Copper‑containing waste; chelators and proteins can interfere without control.

• Phenol–sulfuric acid (total carbohydrate)

  • Pros: Measures total carbohydrate (incl. non‑reducing); very sensitive.
  • Cons: Concentrated acids/phenol hazards; not selective for reducing sugars.

Greener practice tips (literature): • Miniaturize to microplate format to reduce reagent use and waste. • Use sealed heating blocks to minimize emissions and energy losses. • Implement proper waste segregation; neutralize alkali and manage nitroaromatic residues per local EHS guidance.

Pharmaceutical Uses

As a BioReagent for laboratory analytics, DNS Reagent (QB/T Method) is used in process and research settings to quantify reducing sugars in raw materials, intermediates, or formulations. It is not an excipient and has no pharmacopeial monograph stated here. No clinical or therapeutic uses are implied. Any use in GMP environments requires user qualification and method validation. Specific pharmacopeial status or compliance claims are not specified for this item; refer to CoA/Spec Sheet.

Physical Properties

• Product form: Not specified for this item; refer to CoA/Spec Sheet (DNS reagents are commonly supplied as aqueous solutions or concentrates; literature only). • Appearance: Not specified for this item; refer to CoA/Spec Sheet. • pH: Not specified for this item; refer to CoA/Spec Sheet (DNS assays are typically performed under strongly alkaline conditions; literature). • Boiling point, melting point, density, refractive index, logP: Not applicable to a formulated multi‑component reagent or not specified for this item; refer to CoA/Spec Sheet. • Solubility: If supplied as an aqueous solution, miscible with water (general). Exact solubility specifications are not provided for this item; refer to CoA/Spec Sheet. • Spectral characteristics (literature, method context): reaction product with reducing sugars exhibits a broad absorbance band around 540 nm (commonly 540–550 nm) after heating and subsequent stabilization on cooling. • Stability: Store at 2–8°C (Product Data). Additional stability parameters (shelf life, light sensitivity, freeze‑thaw tolerance) are not specified for this item; refer to CoA/Spec Sheet.

Quality and Grades

• Grade: BioReagent (Product Data). This signifies suitability for common biochemical/biotechnology research procedures where low levels of interfering contaminants are desired. It is not equivalent to clinical/diagnostic grade unless explicitly stated. • Intended use: For research use only (Product Data). Not for human or veterinary use, clinical diagnostics, or therapeutic applications. • QB/T Method: Indicates conformance to a QB/T (Light Industry) methodological framework widely used in Chinese standards for colorimetric reducing‑sugar assays. The exact compositional and performance specifications (e.g., blank absorbance limits, linear range criteria) are not specified for this item; refer to CoA/Spec Sheet. • UV/trace impurity specifications, stabilizers, and acceptance limits: Not specified for this item; refer to CoA/Spec Sheet. • Lot-to-lot consistency: BioReagent‑grade DNS solutions are typically controlled for color, blank stability, and response with a glucose standard (literature practice). Specific QC tests for SKU D1528885 are not specified; refer to CoA/Spec Sheet. • Documentation: For method transfer and accreditation, request the SDS, CoA, and any validation summary applicable to the QB/T variant supplied.

Reaction and Applications

• Primary application: Colorimetric quantification of reducing sugars (e.g., glucose, fructose, maltose, lactose, cellobiose) based on reduction of DNSA to 3‑amino‑5‑nitrosalicylic acid under alkaline, heated conditions (literature). The orange/red chromophore exhibits strong absorbance near 540 nm. • Mechanistic notes (literature):

  • Reducing ends (aldehyde/α‑hydroxy ketone) reduce the nitro group of DNSA while being oxidized to carboxylates.
  • Alkaline medium accelerates enolization and electron transfer.
  • Tartrate acts as a stabilizer/complexant and can improve linearity and color stability in common formulations. • Use domains:
  • Food, feed, and fermentation analytics for reducing sugar profiling and monitoring saccharification.
  • Enzymology: assay of glycosidases, amylases, cellulases via released reducing ends.
  • Bioprocess monitoring: hydrolysate tracking in lignocellulosic conversions. • Practical tips (literature):
  • Calibrate daily with a matched standard (e.g., anhydrous D‑glucose) across the expected range.
  • Heat at 95–100°C for a defined time, then cool rapidly to fix color before reading at ~540 nm.
  • Perform matrix‑matched blanks; filter or clarify turbid samples to minimize scattering.
  • Maintain consistent tube geometry/path length; microplate adaptations require wavelength and path‑length correction. • Manufacturer Applications: Not specified beyond the product name; this tab expands on the canonical DNS use per literature. Always adapt to the QB/T method directions supplied with this item.
Reaction Conditions

General DNS assay conditions (literature; adapt to your SOP and the QB/T method supplied with this item): • Calibration: Prepare a fresh standard curve using D‑glucose (e.g., 0–1.0 mg/mL range in water). Use matrix‑matched standards when feasible. • Reagent/sample ratio: Commonly 1:1 v/v DNS reagent to sample in test tubes or microplates; adjust to maintain linearity and color depth. • Heating: Incubate sealed tubes or covered microplates at 95–100°C for 5–15 minutes. Heating time affects color yield; keep constant across standards and samples. • Cooling: Rapidly cool to room temperature (e.g., in a water bath) to stabilize the chromophore. Some protocols dilute after cooling to bring absorbance into range. • Detection: Measure absorbance at ~540 nm (commonly 540–550 nm). Use a reagent blank to zero the instrument. • Linearity and sensitivity: Typically linear over low‑to‑mid mM monosaccharide concentrations; response factors differ among sugars (glucose ≠ fructose ≠ maltose). Determine method‑specific factors. • Interferences: Strong reductants (sulfite, ascorbate), high amine content, colored/turbid matrices, and high organic cosolvent fractions can bias results. Clarify or dilute as needed; run appropriate blanks/spikes. • Quality controls: Include mid‑range check standards and duplicates. Monitor blank drift and reagent color over time. Note: These are literature guidelines; follow the QB/T method for this item where provided.

Safety and Handling

• GHS classification, signal word, pictograms, H‑statements: Not specified for this item; refer to the product SDS for authoritative information. • General hazards (literature/context): DNS reagent preparations are typically strongly alkaline and may contain nitroaromatic compounds; expect corrosivity to skin/eyes and potential acute toxicity on ingestion/inhalation. Avoid contact and inhalation of vapors/aerosols. • PPE: Use appropriate laboratory PPE — lab coat, safety goggles/face shield, and chemical‑resistant gloves (e.g., nitrile). Work in a chemical fume hood to avoid exposure to caustic fumes or aerosols. • Incompatibilities (general): Acids (neutralizes/exothermic), strong oxidizers or reducers (depending on formulation), and reactive metals/aluminum under alkaline conditions. Do not mix with hypochlorite bleach or other oxidants. • First aid (overview; defer to SDS):

  • Skin/eye contact: Immediately flush with copious water for ≥15 min; remove contaminated clothing; seek medical attention for eye exposure.
  • Inhalation: Move to fresh air; seek medical attention if symptoms persist.
  • Ingestion: Rinse mouth; do not induce vomiting; seek medical attention. • Spill/cleanup: Contain and absorb with inert material. Neutralize cautiously if trained (due to alkalinity), collect in compatible container for disposal per institutional and local regulations. • Fire: Not expected to be highly flammable as an aqueous preparation; nitroaromatics can decompose under heat. Use water spray, CO2, or dry chemical as appropriate for surrounding fire.
Solvent Selection

• Nature of the product: A ready‑to‑use or concentrate DNS assay reagent (mixture). It is typically an aqueous alkaline solution (literature). Solvent selection by the user is generally not required. • Polarity/miscibility: If supplied as solution, fully water‑miscible. Compatible with most aqueous samples and water‑soluble matrices. Alcohols at modest percentages are generally tolerated but can alter color yield; validate if present (literature caution). • Sample compatibility considerations (literature):

  • Sugars and oligosaccharides in aqueous matrices are ideal.
  • High salt, strong buffers, sulfite, or high concentrations of amines/reductants can interfere with color development.
  • Organic cosolvents >10–20% v/v may depress the response or shift blank. • When to choose DNS vs alternatives: DNS is robust for broad classes of reducing sugars, tolerant of many sample types after dilution/clarification. For protein‑rich samples or when copper chelation is desired, consider BCA/PAHBAH methods (literature). For total carbohydrate (reducing + non‑reducing) use phenol–sulfuric acid (literature). • Non‑applicability: As a formulated reagent, classical solvent selection (e.g., picking among organic solvents) is not typically applicable; focus on sample preparation and interference control.
Storage and Reconstitution

• Storage conditions: Store at 2–8°C (Product Data). Protect from contamination and excessive heat. If light sensitivity is a concern for your method, store in an amber container (general good practice). • Shipping: Shipped on wet ice (Product Data). • Reconstitution/dilution: Not specified for this item; refer to CoA/Spec Sheet. If supplied as a concentrate, prepare working strength with high‑purity water according to the product insert and label the prepared solution with expiration dating per your QA policy. • Handling: Mix gently before use to ensure homogeneity. Avoid introducing reducing contaminants via pipette tips or containers. • Stability after opening: Not specified for this item; refer to CoA/Spec Sheet. For consistent performance, minimize repeated warming/cooling cycles and record open date. • Freeze–thaw: Not specified for this item; unless directed by the manufacturer, avoid freezing alkaline DNS mixtures to prevent precipitation or performance drift.

Structure and Identity

• Item type: DNS Reagent (QB/T Method) — a formulated colorimetric reagent for reducing-sugar determination. This is a mixture/reagent system, not a single defined compound. • Core chromogenic component (literature): commonly based on 3,5‑dinitrosalicylic acid (DNSA) reduced by aldehyde/ketone groups of reducing sugars to yield an orange/red product (3‑amino‑5‑nitrosalicylic acid) measurable spectrophotometrically. • Composition details: Not specified for this item; refer to CoA/Spec Sheet. Formulations of DNS reagents often include alkaline base and tartrate salts (literature), but the exact QB/T method composition can vary by standard and supplier. • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet. • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet. • SMILES / InChIKey / CAS / CID: Not specified for this item; refer to CoA/Spec Sheet. • Structural features (literature, for the chromophore DNSA): nitro‑substituted salicylic acid (aromatic ring, phenolic OH, carboxylic acid, two nitro groups). Reduction converts one nitro group to an amino group, shifting absorbance to the visible region. • 2D description (literature): an ortho‑hydroxybenzoic acid ring bearing nitro groups typically at the 3‑ and 5‑positions (DNSA); under assay conditions, one nitro group is reduced, producing the characteristic orange/red chromophore.

Synthetic Utility

This product is not generally employed as a reagent for preparative synthetic chemistry. Its primary role is analytical (colorimetric detection/quantification of reducing sugars). For synthetic transformations involving nitroaromatic salicylic acids or redox chemistry, dedicated reagents should be selected instead. Consult the Reaction & Applications and Reaction Conditions tabs for analytical use guidance.

Target Specificity

Not applicable. This product is not an affinity reagent (e.g., antibody) and no target/epitope specificity data are provided in the Product Data. Functionally, DNS assays respond broadly to reducing sugars with accessible reducing ends (literature), but no item‑specific specificity is claimed here.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.