Determine the necessary mass, volume, or concentration for preparing a solution.
This kit employs a sandwich enzyme-linked immunosorbent assay (ELISA) for the quantitative detection of Human proGRP concentration in samples. The Human proGRP capture antibody is pre-coated onto the microtiter plate. Upon addition of samples or standards, Human proGRP present therein binds to the immobilized capture antibody, while other unbound components are removed through washing. Subsequently, a biotin-conjugated detection antibody specific for Human proGRP is added. This antibody binds to the captured Human proGRP, forming a "sandwich" immunocomplex. Any excess, unbound material is again removed by washing. Next, an enzyme conjugate (typically Streptavidin-Horseradish Peroxidase, SA-HRP) is added. The biotin on the detection antibody and streptavidin on the enzyme conjugate exhibit high-affinity binding, thereby linking the HRP enzyme to the immunocomplex. Following another wash step to remove unbound conjugate, a colorimetric substrate (e.g., TMB) is added. If Human proGRP is present in the sample, the HRP linked to the complex catalyzes the oxidation of the colorless substrate, yielding a blue product. The reaction is then stopped by adding a stop solution (usually an acid), which changes the color from blue to yellow. The optical density (OD) of each well is measured at 450 nm using a microplate reader. The concentration ofHuman proGRP is directly proportional to the OD450 value. A standard curve is generated by assaying known concentrations ofHuman proGRP, and the concentration of Human proGRP in unknown samples is interpolated from this curve based on their OD values.
당사의 등급 선택 가이드는 카탈로그의 모든 변형 제품에 대해 순도, 안정제 상태 및 용도 적합성을 다룹니다.
BioReagent 등급 가이드 보기 →