등급 & 순도Carrier Free?Carrier-free — supplied without added carrier protein/stabilizer. Use when carriers (e.g. BSA) would interfere with conjugation or sensitive assays.Azide Free?Azide-free — without sodium azide preservative. Use in conjugations, cell work, or assays where azide is toxic or inhibitory.Validated?Validated grade — performance confirmed in defined applications before release. Use when you want documented assurance the reagent works as stated.PBS Only?PBS-only formulation — supplied in phosphate-buffered saline with no other additives. Use when you need a clean PBS buffer free of stabilizers/carriers.≥95%(SDS-PAGE)See COA
Rat anti Mouse Integrin beta 1/CD29 Antibody, Monoclonal (KMI6), could be used for IF, ICC, Flow, in vitro CD29 neutralization and so on. Application Flow: Use at an assay dependent concentration. ICC/IF: Use at an assay dependent concentration. in vitro CD29 neutralization: Use at an assay dependent concentration. Protein Function Integrins alpha-1/beta-1, alpha-2/beta-1, alpha-10/beta-1 and alpha-11/beta-1 are receptors for collagen. Integrins alpha-1/beta-1 and alpha-2/beta-2 recognize the proline-hydroxylated sequence G-F-P-G-E-R in collagen. Integrins alpha-2/beta-1, alpha-3/beta-1, alpha-4/beta-1, alpha-5/beta-1, alpha-8/beta-1, alpha-10/beta-1, alpha-11/beta-1 and alpha-V/beta-1 are receptors for fibronectin. Alpha-4/beta-1 recognizes one or more domains within the alternatively spliced CS-1 and CS-5 regions of fibronectin. Integrin alpha-5/beta-1 is a receptor for fibrinogen. Integrin alpha-1/beta-1, alpha-2/beta-1, alpha-6/beta-1 and alpha-7/beta-1 are receptors for lamimin. Integrin alpha-4/beta-1 is a receptor for VCAM1. It recognizes the sequence Q-I-D-S in VCAM1. Integrin alpha-9/beta-1 is a receptor for VCAM1, cytotactin and osteopontin. It recognizes the sequence A-E-I-D-G-I-E-L in cytotactin. Integrin alpha-3/beta-1 is a receptor for epiligrin, thrombospondin and CSPG4. Alpha-3/beta-1 may mediate with LGALS3 the stimulation by CSPG4 of endothelial cells migration. Integrin alpha-V/beta-1 is a receptor for vitronectin. Beta-1 integrins recognize the sequence R-G-D in a wide array of ligands. Isoform 2 interferes with isoform 1 resulting in a dominant negative effect on cell adhesion and migration (in vitro). When associated with alpha-7/beta-1 integrin, regulates cell adhesion and laminin matrix deposition. Involved in promoting endothelial cell motility and angiogenesis. Involved in osteoblast compaction through the fibronectin fibrillogenesis cell-mediated matrix assembly process and the formation of mineralized bone nodules. May be involved in up-regulation of the activity of kinases such as PKC via binding to KRT1. Together with KRT1 and RACK1, serves as a platform for SRC activation or inactivation. Plays a mechanistic adhesive role during telophase, required for the successful completion of cytokinesis. Integrin alpha-3/beta-1 provides a docking site for FAP (seprase) at invadopodia plasma membranes in a collagen-dependent manner and hence may participate in the adhesion, formation of invadopodia and matrix degradation processes, promoting cell invasion. ITGA4:ITGB1 binds to fractalkine (CX3CL1) and may act as its coreceptor in CX3CR1-dependent fractalkine signaling (PubMed:23125415, PubMed:24789099). ITGA4:ITGB1 and ITGA5:ITGB1 bind to PLA2G2A via a site (site 2) which is distinct from the classical ligand-binding site (site 1) and this induces integrin conformational changes and enhanced ligand binding to site 1 (PubMed:18635536, PubMed:25398877). ITGA5:ITGB1 acts as a receptor for fibrillin-1 (FBN1) and mediates R-G-D-dependent cell adhesion to FBN1 (PubMed:12807887, PubMed:17158881). Isoform 5: Isoform 5 displaces isoform 1 in striated muscles. (Microbial infection) Integrin ITGA2:ITGB1 acts as a receptor for human echoviruses 1 and 8 (PubMed:8411387). Acts as a receptor for cytomegalovirus/HHV-5 (PubMed:20660204). Acts as a receptor for Epstein-Barr virus/HHV-4 (PubMed:17945327). Integrin ITGA5:ITGB1 acts as a receptor for human parvovirus B19 (PubMed:12907437). Integrin ITGA2:ITGB1 acts as a receptor for human rotavirus (PubMed:12941907). Acts as a receptor for mammalian reovirus (PubMed:16501085). In case of HIV-1 infection, integrin ITGA5:ITGB1 binding to extracellular viral Tat protein seems to enhance angiogenesis in Kaposi's sarcoma lesions (PubMed:10397733).
사양
Product Name
Integrin beta 1/CD29 Rat mAb - 1차 항체, specific to Integrin beta 1/CD29, Rat IgG2a
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
리뷰
고객 리뷰
Application Protocols
Item-specific tested applications and recommended dilutions
Not specified for this item; refer to CoA/Spec Sheet.
Note
In the absence of manufacturer‑validated protocols for this SKU, users should perform small‑scale pilot optimizations (titration series, incubation time/temperature matrices, fixation/permeabilization condition screens) appropriate to the intended assay. No specific protocols are claimed for this product.
Biological Roles
Integrin β1 (CD29) biology (literature; general background)
Integrin β1 pairs with multiple α subunits (e.g., α1–α11, αv) to form heterodimeric integrins (e.g., α5β1, α3β1) that mediate cell–ECM adhesion to ligands such as fibronectin, collagen, laminin, and vitronectin.
Signaling: Ligation of β1‑containing integrins triggers outside‑in signaling cascades involving FAK, Src, PI3K, and MAPKs, regulating cytoskeletal remodeling, migration, proliferation, and survival. Inside‑out signaling (e.g., via talin/kindlin) modulates integrin affinity/avidity.
Conformation: Integrins cycle between inactive (bent), active (extended), and high‑affinity states. Divalent cations (Mg2+, Mn2+, Ca2+) and specific antibodies/ligands shift conformational equilibria, altering adhesion and signaling.
Cellular distribution: β1 integrins localize to focal adhesions and along leading edges; trafficking between plasma membrane and endosomes regulates surface levels and adhesive dynamics.
Developmental and tissue roles: β1 integrins are crucial for embryogenesis, tissue architecture, stem cell niches, and wound responses (literature). Dysregulated β1 signaling impacts fibrosis, angiogenesis, and immune cell trafficking in experimental models.
Implications for research use (general)
Anti‑CD29 antibodies enable detection, quantification, and perturbation of integrin‑mediated adhesion/signaling in cultured cells, organoids, and tissue sections.
Epitope context matters: Some clones recognize activation‑specific epitopes (“ligand‑induced binding sites,” LIBS), while others are conformation‑insensitive; the specific epitope and functional class for this item are not specified and should be verified from CoA/Spec Sheet or by empirical testing.
Buffer Applications
Relevance
As a protein reagent supplied in PBS, buffer selection affects stability, binding, and assay performance.
General buffer guidance for antibody workflows (literature; not product specifications)
Stock/storage: PBS at near‑neutral pH is standard. This item is designated “PBS Only”; exact composition and pH are not specified for this item.
Working buffers: For immunoassays, PBS or TBS with 0.05% Tween‑20 (PBST/TBST) often reduces nonspecific binding. For flow cytometry, PBS + 1–2% serum/BSA (if compatible with “carrier‑free” needs) and 1–2 mM EDTA can reduce cell clumping; avoid azide for live cells (this item is azide‑free).
Antigen retrieval: For FFPE IHC, citrate or Tris‑EDTA retrieval buffers may unmask epitopes; optimal conditions are epitope‑ and clone‑specific.
Elution/stripping: For immunoprecipitation, gentle elution buffers preserve complexes; for WB stripping, low‑pH glycine or mild denaturants can remove antibodies between probings.
Practical considerations
Filter sterilize and degas buffers to minimize particulates and foaming. Use low‑bind plastics and pre‑block sample contact surfaces when working at sub‑μg/mL concentrations.
Item-specific limitation
No buffer recipes, pH, or additive specifications are provided for this SKU; consult CoA/Spec Sheet and validate conditions in your lab setting.
Green Alternatives
Environmental and safety profile considerations (contextual)
Azide Free formulation reduces handling and disposal concerns associated with sodium azide, a toxic preservative that forms explosive metal azides in plumbing. This improves lab safety and lowers hazardous waste burden.
Carrier Free reduces reliance on animal‑derived stabilizers (e.g., serum/BSA) and minimizes downstream waste streams when performing conjugations or purifications.
Greener practice suggestions (general)
Cold‑chain efficiency: Combine orders to minimize shipment frequency; promptly transfer to 2–8°C storage to reduce spoilage and waste.
Reuse/Recycle: Employ recyclable secondary packaging from shipments and consider take‑back programs for cold packs where available.
Buffer preparation: Make PBS from concentrated stocks to reduce packaging and transport emissions; use validated sterile filtration rather than single‑use sterile bottles when appropriate.
Comparison (general, qualitative)
Azide‑containing antibodies: Longer bench stability but hazardous preservative management required; incompatible with live‑cell assays and HRP.
Azide‑free antibodies (this item): Better for live‑cell and enzyme‑linked assays; may require stricter aseptic technique to prevent microbial growth.
Trade‑offs to note
Without carrier proteins or preservatives, meticulous aseptic handling is essential to maintain shelf life and prevent contamination. Where assay‑compatible, consider adding benign stabilizers in your own workflow; evaluate their impact on experimental outcomes before adoption.
Pharmaceutical Uses
Scope and limitations
This product is designated For Research Use Only and is not intended for diagnostic or therapeutic applications. No GMP status, compendial monograph compliance, or clinical use claims are made.
Roles in pharmaceutical R&D (general; not item‑specific claims)
Target validation: Anti‑CD29 antibodies are used to profile integrin β1 expression across cell lines and primary tissues to inform target engagement strategies.
Mechanistic studies: Modulation of β1 integrin function with specific antibodies helps dissect adhesion‑dependent signaling and drug mechanism of action in preclinical models.
Assay development: Serves as a capture/detection reagent in ligand‑binding assays, ELISAs, or cell‑based potency assays measuring integrin‑mediated adhesion or signaling.
Biomaterials and QC: Antibody‑based surface characterization of scaffolds (e.g., fibronectin‑coated devices) and in‑process controls in cell manufacturing research.
Formulation context (general)
Azide‑free, carrier‑free antibodies are preferred for conjugation (e.g., ADC research, imaging probes) because they avoid azide inhibition and carrier competition. Buffer exchange into conjugation‑compatible media may be required prior to derivatization.
Compliance note
If use in regulated environments is contemplated, establish incoming QC (identity, purity, potency), document risk assessments, and consider sourcing GMP‑grade reagents; this SKU is not specified as GMP‑grade.
Physical Properties
Item-specific properties
Appearance, concentration, pH, excipients: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight (exact), extinction coefficient, isoelectric point (pI): Not specified for this item; refer to CoA/Spec Sheet.
General/literature properties of IgG-class monoclonal antibodies (for context; not product specifications)
Typical MW: ~150 kDa for full-length IgG (∼50 kDa heavy chains ×2; ∼25 kDa light chains ×2).
pI: often in the range 6–9, varies by sequence and glycosylation; dictates charge in PBS.
Solubility: high aqueous solubility in near‑neutral buffers (e.g., PBS, TBS) when properly formulated; sensitive to aggregation under extreme pH, high ionic strength, or elevated temperature.
Stability: sensitive to freeze–thaw, interfacial stress (foaming), and proteolysis; stabilized by appropriate buffer systems and gentle handling.
Storage buffer: Supplied as “PBS Only” per grade note (composition details not specified for this item).
Notes on handling metrics
Without an extinction coefficient for this specific clone/preparation, concentration by A280 cannot be accurately calculated; consult CoA/Spec Sheet for epsilon and concentration if provided.
Biophysical characterization (DSC Tm, DLS size, SEC monomer %) and residuals (endotoxin, HCP, bioburden) are not specified for this item.
Carrier Free: Formulated without protein carriers (e.g., BSA). Advantages include reduced background in assays, cleaner conjugation chemistry (e.g., biotin, enzymes, fluorophores), and lower risk of carrier‑derived interference.
Azide Free: No sodium azide added. Beneficial for live‑cell applications, azide‑sensitive enzymes, and downstream conjugation; reduces chemical hazard and waste concerns associated with azides.
Validated: Indicates internal verification of identity/performance by the supplier; specific validation modalities (e.g., WB, IHC, flow cytometry, blocking) are not listed. Application‑level validation details are not specified for this item; refer to CoA/Spec Sheet.
PBS Only: Supplied in phosphate‑buffered saline without additional stabilizers listed. Exact PBS composition (pH, ionic strength) and any preservatives are not specified.
Implications for use
Absence of carrier and azide facilitates direct labeling via NHS, maleimide, or click‑compatible handles without carrier/protectant interference. Ensure buffer exchange if required by your conjugation chemistry (e.g., remove amines for NHS ester reactions).
Without carrier proteins, adsorptive losses to plastics can be higher at low concentrations; pre‑block surfaces or use low‑bind plastics as needed.
Documentation and lot control
For lot‑specific concentration, purity, residual aggregates (SEC), endotoxin, and identity (e.g., mass/peptide mapping), this information is Not specified for this item; refer to CoA/Spec Sheet.
Reaction and Applications
This section is framed for bioanalytical applications rather than small‑molecule synthesis, as the product is a monoclonal antibody.
Potential research applications (general; not item‑validated claims)
Immunodetection: Western blotting, immunocytochemistry/immunohistochemistry, and immunoprecipitation to detect Integrin β1 (CD29) expression and complexes. Performance parameters for this specific item are not specified; optimize empirically.
Flow cytometry: Surface staining of cells to quantify CD29 expression levels and to phenotype cell populations. Use azide‑free buffers for live‑cell work.
Functional blocking/activation assays: Some anti‑CD29 mAbs are used to modulate integrin function (blocking or activating) in adhesion and signaling studies; suitability of this specific antibody is not specified.
Affinity capture: Pull‑down of Integrin β1‑containing complexes from lysates or membrane fractions; consider gentle, non‑denaturing detergents (e.g., digitonin) if preserving complexes.
Assay design considerations (general)
Antigen presentation: Integrin β1 is a type I transmembrane protein; native conformation and divalent cations (Mg2+, Mn2+, Ca2+) can influence epitope exposure and affinity.
Controls: Include isotype and secondary‑only controls. Validate specificity using knockout/knockdown lines or blocking peptide/ligand competition when available.
Matrix effects: Detergents, fixation, and decalcification can mask epitopes; optimize retrieval and blocking conditions accordingly.
Item-specific note
Manufacturer applications for this SKU are not listed in the Product Data; no tested/validated application claims are made here.
Reaction Conditions
Not a chemical reaction reagent in the conventional sense
This antibody is used in biological assays rather than stoichiometric/ catalytic organic reactions. No item‑specific reaction conditions are provided.
General experimental conditions for antibody‑based assays (literature; not product specifications)
Incubation temperatures: Commonly 2–8°C (overnight) for high‑affinity binding or 20–25°C for 1–2 h; avoid >37°C unless validated.
Buffers: PBS or TBS at near‑neutral pH; inclusion of mild detergents (0.05% Tween‑20) for washes can reduce nonspecific binding.
Concentrations: Working concentrations span ng/mL to μg/mL depending on assay (WB, IHC, IF, flow); optimal ranges are clone‑ and matrix‑dependent and are not specified for this item.
Divalent cations: For integrin biology, maintain physiological Mg2+/Ca2+; Mn2+ can enhance activation in certain assays. Validate effects on epitope recognition.
Detergents for IP: Use gentle, non‑denaturing detergents when preserving integrin complexes (e.g., 0.1–1% digitonin or mild NP‑40 alternatives); harsh detergents can disrupt interactions and epitopes.
Documentation note
No lot‑specific incubation times, temperatures, or recommended dilutions are provided for this SKU; determine empirically and refer to CoA/Spec Sheet for any future updates.
Safety and Handling
Regulatory status
Research Use Only (RUO): For research use only; not for diagnostic, clinical, or therapeutic applications.
GHS/SDS
Signal word, hazard statements, pictograms, and classification: Not specified for this item; refer to SDS for authoritative safety information.
General antibody safety guidance (good laboratory practice)
PPE: Wear lab coat, nitrile gloves, and safety glasses. Handle in a clean area to avoid contamination.
Avoid generating aerosols or foaming; proteins can denature at air–liquid interfaces.
Biological safety: Although recombinant/ascites‑free sources are common, treat all protein solutions as potentially biohazardous; follow institutional biosafety procedures.
Chemical safety: This preparation is designated Azide Free (no added sodium azide), reducing risks associated with azide toxicity and heavy‑metal azide formation in plumbing. Still, avoid ingestion, inhalation, or skin/eye contact.
Storage and incompatibilities
Storage conditions: Store at 2–8°C. Do not freeze (per Product Data). Shipments on wet ice; keep refrigerated upon receipt.
Incompatibilities (general): Avoid strong oxidizers, extreme pH (<5 or >9) unless validated, and organic solvents that can denature proteins. Minimize exposure to elevated temperatures and repeated warm–cold cycles.
First‑aid (general)
Skin/eye contact: Rinse with water for several minutes. Remove contaminated clothing. If irritation persists, seek medical attention.
Inhalation/ingestion: Move to fresh air; rinse mouth; seek medical advice as needed. Always consult the SDS for detailed instructions.
Solvent Selection
Context for this product
This is a protein reagent supplied as “PBS Only”. Organic solvent selection is not typically applicable. Instead, focus on buffer compatibility and sample‑handling conditions that preserve antibody conformation and activity.
Buffer and diluent considerations (general guidance)
Preferred diluents: PBS or TBS at near‑neutral pH. Maintain isotonic ionic strength (e.g., ~150 mM NaCl, literature) unless your assay requires otherwise.
Additives (if compatible with your assay): Small amounts of inert proteins (e.g., BSA) or polymers (e.g., 0.01–0.05% Tween‑20) can reduce nonspecific adsorption; note that this item is carrier‑free—introducing carriers may defeat that purpose.
Avoid: High percentages of organic solvents, chaotropes, or detergents that can denature antibodies unless purposefully used for elution in affinity workflows.
Comparison (general, literature)
PBS vs TBS: TBS can reduce phosphate‑dependent interactions (e.g., with some metal ions or phospho‑sensitive assays). PBS is widely compatible with mammalian cell and protein assays.
Azide‑free vs azide‑containing: Azide inhibits heme enzymes (e.g., HRP) and mitochondrial respiration; azide‑free formulations are preferred for live‑cell staining and functional assays.
Practical tips
Pre‑filter buffers (0.22 μm) and use low‑bind plastics. Equilibrate all reagents to 2–8°C use temperature promptly; avoid extended bench‑top time.
Storage and Reconstitution
Item-specific instructions (from Product Data)
Storage: Store at 2–8°C. Do not freeze.
Shipping: Shipped on wet ice; keep refrigerated upon receipt. Do not freeze during transport or storage.
Handling recommendations (general; align with above)
Minimize temperature fluctuations: Keep on ice during setup and promptly return to 2–8°C.
Aseptic technique: Because the formulation is Azide Free and Carrier Free, employ sterile handling to reduce risk of microbial contamination.
Mixing: Gently invert; avoid vigorous vortexing or frothing to prevent denaturation.
Light protection: If the antibody is or will be conjugated to light‑sensitive dyes or cofactors, protect from light.
Reconstitution
Physical state and reconstitution details are not specified for this item; refer to CoA/Spec Sheet. If provided lyophilized in future lots, reconstitute with sterile PBS (or as directed) and allow to equilibrate at 2–8°C before use.
Stability note
Avoid prolonged room‑temperature exposure. Because freezing is contraindicated for this SKU, do not aliquot for frozen storage; instead, prepare fresh working dilutions as needed and discard any contaminated or expired material per institutional guidelines.
Structure and Identity
Item-specific facts (from Product Data)
Product name: Integrin beta 1/CD29 Rat mAb (SKU: Ab110853)
Format/grade: Carrier Free; Azide Free; Validated; PBS Only
CAS, CID, InChIKey, SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula and molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
General antibody structural features (literature)
Monoclonal antibodies (mAbs) are Y‑shaped immunoglobulins typically composed of two heavy chains and two light chains linked by disulfide bonds, forming two antigen‑binding fragments (Fab) and one crystallizable fragment (Fc).
A typical IgG has variable domains (VH/VL) that confer specificity to an epitope on the target antigen (here, Integrin beta 1/CD29), and constant domains that determine effector functions and isotype.
Approximate architecture: each chain contains immunoglobulin (Ig) domains with conserved β‑sandwich folds stabilized by intradomain disulfides.
Glycosylation: Fc region is usually N‑glycosylated (e.g., at Asn297 for IgG, literature), which can influence stability and Fc interactions; exact glycoform for this item is not specified.
2D/functional description in words (literature)
The antibody comprises two identical antigen‑binding sites located at the tips of the Fab arms, each formed by six CDR loops that create a paratope complementary to an epitope on Integrin β1 (CD29). The Fc stem mediates interactions with Protein A/G (isotype‑dependent) and with Fc receptors (species/isotype dependent). Precise isotype/clone/epitope mapping for this item: Not specified; refer to CoA/Spec Sheet.
Synthetic Utility
Not typically applicable
As a monoclonal antibody reagent, this product is not used as a small‑molecule building block or reagent in classical organic synthesis. Instead, see the “Reaction & Applications” and “Buffer Applications” sections for bioanalytical and cell biology use cases.
General notes (context)
Antibodies can be chemically modified (conjugated) to enzymes, fluorophores, biotin, or drug payload surrogates for detection or mechanistic studies. If performing conjugation, ensure buffer compatibility (amine‑free buffers for NHS ester chemistry; reducing agent‑free buffers for maleimide chemistry). Specific conjugation readiness and required buffer exchanges for this SKU are not specified; consult CoA/Spec Sheet.
Target Specificity
Item-specific details from Product Data
Antigen/Target name: Integrin beta 1 (CD29)
Details not provided for this item (consult CoA/Spec Sheet)
Epitope: Not specified for this item; refer to CoA/Spec Sheet.
Species reactivity: Not specified for this item; refer to CoA/Spec Sheet.
Clone designation: Not specified for this item; refer to CoA/Spec Sheet.
Isotype: Not specified for this item; refer to CoA/Spec Sheet.
General context (literature)
Integrin β1 is a transmembrane adhesion receptor that heterodimerizes with multiple α subunits and binds ECM ligands such as fibronectin, collagen, and laminin. Antibody specificity can be conformation‑dependent; verify epitope compatibility with your assay conditions.
자주 묻는 질문
What does Azide Free mean?
Azide Free indicates that the material has been processed and tested for specialty industrial processing. Specifications focus on the impurities that affect performance in that application — for example, metal content for electronics, particle size for batteries, refractive index for optics, or moisture content for moisture-sensitive processes.
What does Carrier Free mean?
Carrier Free indicates that the material has been processed and tested for specialty industrial processing. Specifications focus on the impurities that affect performance in that application — for example, metal content for electronics, particle size for batteries, refractive index for optics, or moisture content for moisture-sensitive processes.
How should this product be stored?
Store at 2–8 °C. Do not freeze. Freezing may cause irreversible damage to this material.
How is this product shipped?
This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Which species reactivity has this antibody been validated against?
Validated reactivity is listed on the PDP and on each lot's datasheet. We validate against the most commonly tested species for the target (Integrin beta 1/CD29 Rat mAb); cross-reactivity in untested species may exist but is not guaranteed. Contact technical support for specific species inquiries.
What is the purity of this product, and how is it determined?
This product is supplied at ≥95% purity, determined by SDS-PAGE. Lot-specific values are stated on the Certificate of Analysis.
등급 선택에 도움이 필요하신가요?
당사의 등급 선택 가이드는 카탈로그의 모든 변형 제품에 대해 순도, 안정제 상태 및 용도 적합성을 다룹니다.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.