Determine the necessary mass, volume, or concentration for preparing a solution.
For enumeration of molds and yeasts; add 220 g of glycerol per liter of medium
Item-specific validated protocols are not provided. General, literature-style workflow for enumeration on DG-type media:
Modified DG-18 Agar Base does not have a single biological role as a molecule; instead, as a complex medium it establishes environmental conditions that select for xerophilic and osmotolerant fungi. • Functional roles in culture (literature, general for DG-type media):
Not applicable. Modified DG-18 Agar Base is a complete culture medium base rather than a buffering reagent. While prepared media possess a defined pH, the product is not used to formulate laboratory buffer systems. For practical guidance, see Storage & Reconstitution and Reaction & Applications.
Green chemistry considerations are limited for dehydrated culture media, which are water-based and used at modest concentrations. • Potential improvements (general):
Direct pharmaceutical formulation/excipient uses are not typical. In pharma/biotech quality control laboratories, DG-type agars may be used in non-clinical environmental or raw-material monitoring to assess fungal bioburden in dry/high-sugar matrices (lab QC context). No therapeutic or clinical diagnostic use is intended or implied. Compendial status (e.g., pharmacopeial monographs) is not specified for this item; refer to CoA/Spec Sheet and your quality system for suitability assessments.
Item-specific physico-chemical constants are not provided for this complex mixture.
• Form: Dehydrated blend/powder (general for agar media; item-specific appearance not provided). • Solubility: Dispersible in water upon heating; forms a gel on cooling due to agar content (general, literature). • pH (prepared medium): Not specified for this item; refer to CoA/Spec Sheet. (DG-18 media are commonly near neutral–slightly acidic in literature.) • Moisture sensitivity: Dehydrated media are typically hygroscopic; keep container tightly closed to prevent clumping and performance drift (general guidance). • BP/MP, density, refractive index, logP, pKa: Not applicable/Not specified for this heterogeneous medium; refer to CoA/Spec Sheet for any lot-specific details. • Color/clarity (prepared plates): Typically light amber and slightly opalescent after sterilization and pouring (literature, general for DG-type media), but appearance can vary with water quality, autoclave cycle, and supplements. • Sterility: Prepared medium must be sterile; verify via sterility control plate (general best practice).
• Grade: BioReagent (item-specific). This denotes suitability for laboratory research applications where consistent biological performance is required. BioReagent-grade media components are produced and packaged to minimize lot-to-lot variability and bioburden. • Performance attributes (general for microbiological media):
This product is not used as a reagent in synthetic organic reactions. Its primary application is microbiological culture of xerophilic and osmotolerant fungi on low–water-activity agar (general for DG‑type media). Practical laboratory applications (literature/guideline-based): • Food microbiology: Enumeration of yeasts and molds in high-sugar or low‑aw foods (dried fruits, confectionery, spices), where reduced aw and dichloran minimize overgrowth and facilitate colony counting. • Environmental monitoring: Recovery of xerotolerant fungi from dry processing environments. • Method frameworks: Commonly referenced in ISO/ICUMSA/US FDA BAM style protocols for fungal counts in foods (literature), often with specified incubation temperatures (e.g., 25–30 °C) and durations (3–7 days), and optional antibiotics to suppress bacteria. • Practical tips:
Not applicable to chemical reactions. For microbiological use, typical incubation conditions on DG-type media (literature, general guidance) include: • Temperature: Commonly 25–30 °C depending on method and target organisms. • Atmosphere: Aerobic incubation; plates inverted to reduce condensation. • Duration: Often 3–7 days, extending to 10 days for slow growers; enumerate at specified intervals. • Selective supplements: Some protocols add antibiotics (e.g., chloramphenicol) to further suppress bacteria—follow validated procedures. Refer to your method (ISO/industry standard or internal SOP) for exact parameters. Item-specific preparation conditions are provided on the label/CoA.
• GHS/CLP: Not specified for this item; refer to the product SDS for authoritative hazard classification, pictograms, signal word, and H‑statements. • Likely hazards (general for dehydrated media): Dust may cause mechanical irritation to eyes, skin, or respiratory tract; some blends may contain inhibitors (e.g., dichloran) that warrant enhanced care. Avoid inhalation of dust and contact with eyes/skin. Do not ingest. • PPE (best practice): Laboratory coat, nitrile gloves, safety glasses/goggles, and dust control (work in a fume hood or use local exhaust) when handling powders. Use heat-resistant gloves when removing hot media from autoclave/water bath. • Handling: Minimize dust generation. Weigh promptly; re-seal container immediately. Prepare media with appropriate sterilization (typically autoclaving). Prevent post-sterilization contamination. • Incompatibilities (general): Strong oxidizers/reactives are not typically encountered in media prep; however, avoid contact with strong oxidants and acids/bases that could degrade nutrients. Do not autoclave in sealed containers; ensure steam can vent. • Thermal hazards: Autoclaving at 121 °C under pressure poses burn/scald risks. Allow vessels to depressurize fully before opening. • Spill response: Avoid creating dust; sweep or vacuum with HEPA filtration. Wash area with water. • First aid (overview; refer to SDS): Eye contact—rinse with water for several minutes; remove contacts if easy. Skin—wash with soap/water. Inhalation—move to fresh air. Ingestion—rinse mouth; seek medical advice if symptoms persist. • Waste: Dispose of unused dehydrated powder and prepared culture plates according to institutional biohazard and chemical waste policies. Decontaminate used plates by autoclaving before disposal.
Not typically applicable. Modified DG-18 Agar Base is intended to be dispersed in purified water to prepare a solid culture medium. Selection considerations are limited to water quality (e.g., ASTM Type II or better) and optional supplements per method requirements. For other uses, see Reaction & Applications and Storage & Reconstitution.
• Storage (item-specific): Store at room temperature. Keep container tightly closed. Protect from moisture. • Shipping: Shipped in normal conditions (item-specific). • Shelf life: Not specified for this item; refer to CoA/Spec Sheet. • Reconstitution/Preparation (general media guidance; not item-specific):
• Item type: Modified DG-18 Agar Base is a dehydrated, multi‑component microbiological culture medium base formulated for the isolation/enumeration of xerophilic and osmotolerant fungi from foods and environmental samples. • Composition nature: Complex mixture (peptones/yeast extracts, carbohydrates/osmotic modifiers, selective agents such as dichloran, and agar). Exact formulation varies by manufacturer. • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet. • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet. • SMILES / InChI / InChIKey: Not applicable to complex mixtures; not specified for this item; refer to CoA/Spec Sheet. • Structural description (general): Heterogeneous solid blend; no single defined 2D structure. Functional classes (literature, typical):
Not applicable to synthetic chemistry. Modified DG-18 Agar Base is not a reagent for chemical transformations. Its value lies in microbiological selectivity and plate-based enumeration of xerophilic fungi. For usage details, see Reaction & Applications and Application Protocols.
Not applicable. This product is not an antibody, probe, or affinity reagent. It is a culture medium base with functional selectivity for xerophilic/osmotolerant fungi (general microbiological selectivity rather than molecular target specificity). See Biological Roles.
당사의 등급 선택 가이드는 카탈로그의 모든 변형 제품에 대해 순도, 안정제 상태 및 용도 적합성을 다룹니다.
BioReagent 등급 가이드 보기 →