Propazine Solution in Methanol - 1000μg/ml in Methanol , CAS No.139-40-2

CAS: 139-40-2 Cat. No.: P265663 분자식: C9H16ClN5 분자량: 229.71 Beilstein Registry Number: 747081 EC 번호: 205-359-9
주문 가능
등급 & 순도 1000μg/ml in Methanol
Synonyms
2,4-Bis(propylamino)-6-chlor-1,3,5-triazine|6-Chloro-N2,N4-di-isopropyl-1,3,5-triazine-2,4-diamine|6-chloro-N2,N4-diisopropyl-1,3,5-triazine-2,4-diamine|1,3,5-Triazine-2,4-diamine, 6-chloro-N2,N4-bis(1-methylethyl)-|Plantulin|2-chloro-4,6-bis(isopropyl amino)-1,3,5-triazine|s-Triazine, 2-chloro-4,6-bis(isopropylamino)-|2-Chloro-4,6-bis(isopropylamino)-1,3,5-triazine|Propazine [ANSI:BSI:ISO]|2-Chloro-4,6-bis(isopropylamino)-s-triazine|Propazin (VAN)|2,4-Bis(isopropylamino)-6-chloro-s-triazine|Chloro-4,6-bis(isopropylamino)-s-triazine|PROPAZINE [HSDB]|G-30028|Geigy 30,028|6-chloro-N,N'-di(propan-2-yl)-1,3,5-triazine-2,4-diamine|s-Triazine,6-bis(isopropylamino)-|2,4-Bis(isopropylamino)-6-chlorotriazine|G 30028|2-Chlor-4,6-bis(isopropylamino)-s-triazine|2-Chloro-4,6-di(isopropylamino)-1,3,5-triazine|Prozinex|6-chloro-N,N'-(1-methylethyl)-[1,3,5]triazine-2,4-diamine|Propazine (herbicide)|Propazine-d6 100 Amicrog/mL in Acetone|Gesamil|Milogard|2,4-Bis(propylamino)-6-chlor-1,3,5-triazin|2-Chloro-4,6-bis(isopropylamino)triazine|Milo-pro|Propazine [ISO]|PROPAZINE [MI]|2,4-Bis(isopropylamino)-6-chloro-1,3,5-triazine|Primatol P|Propasin|6-chloro-2-N,4-N-di(propan-2-yl)-1,3,5-triazine-2,4-diamine|6-chloro-N,N'-diisopropyl-1,3,5-triazine-2,4-diamine|2,4-bis(1-methylethyl-amino)-6-chloro-s-triazine|propazine|6-Chloro-N,N'-bis(1-methylethyl)-1,3,5-triazine-2,4-diamine|6-Chloro-N,N'-diisopropyl-1,3,5-triazine-2,4-diyldiamine
Storage
Store at 2-8°C,Protected from light
Shipped In
Wet ice
★
크기
USA
독일 (EU)*
가격
수량
1.2ml
P265663-1.2ml
주문제작 · 8~12주

US$47.90

US$69.90
저장 US$22.00 (31.47%)
Enter a quantity for the sizes you want to add.

개요

This standard substance is mainly used for measuring instrument calibration, analysis method evaluation and quality control, as well as the content determination and residue detection of corresponding components in the fields of food, hygiene, environment and agriculture. It can also be used for value traceability or as a standard stock solution. Dilute and prepare various standard solutions for work.


Sample Preparation


This standard substance is made of pure pumaijin with accurate purity as raw material, HPLC grade methanol as solvent, and accurate preparation by weight-volume method.

Propazine, English name: Propazine, CAS: 139-40-2


Traceability and valuation method


This standard material takes the prepared value as the standard value, and uses HPLC-MS to compare the batch of standard materials and quality control control samples to verify the prepared value. Through the use of preparation methods, measurement methods and measuring instruments that meet the requirements of metrological characteristics, the traceability of the value of the reference material is guaranteed.


Characteristic value and uncertainty


NumberNameStandard value(μg/mL)Uncertainty(%)(k=2)
P265663Propazine Solution in Methanol10003


The uncertainty of the standard value is mainly composed of raw material purity, weighing, constant volume, uniformity, stability and other uncertainty components.


Uniformity inspection and stability inspection


According to JJF1343-2012 [General Principles and Statistical Principles for Determining Standard Material Values], the samples after subpackage are randomly sampled, the solution concentration is tested for uniformity and stability. The results show that the standard material has good uniformity and stability.

The quality value of this standard material is valid for 24 months from the date of setting the value. The development unit will continue to track and monitor the stability of the standard material. If the value changes within the validity period, the user will be notified in time.


Packaging, transportation and storage, use and precautions


1. Packaging: This standard substance is packaged in borosilicate glass ampoule, about 1.2mL/piece, please refer to the pipette volume when pipetting or diluting.

2. Transportation and storage: ice bag transportation, avoid squeezing and collision during transportation; store under refrigerated and dark conditions.

3. Use: Equilibrate at room temperature (20±3℃) before unpacking and shake well. Once the ampoule is opened, it should be used immediately. It cannot be used as a standard substance after being sealed again.

사양

동의어
2,4-Bis(propylamino)-6-chlor-1,3,5-triazine | 6-Chloro-N2,N4-di-isopropyl-1,3,5-triazine-2,4-diamine | 6-chloro-N2,N4-diisopropyl-1,3,5-triazine-2,4-diamine | 1,3,5-Triazine-2,4-diamine, 6-chloro-N2,N4-bis(1-methylethyl)- | Plantulin | 2-chloro-4,6-bis(isopropyl amino)-1,3,5-triazine | s-Triazine, 2-chloro-4,6-bis(isopropylamino)- | 2-Chl Show more
사양 및 순도
1000μg/ml in Methanol
보관 조건
Store at 2-8°C,Protected from light
배송
Wet ice
이 제품은 콜드 체인 배송이 필요합니다.지상 및 기타 경제 서비스는 사용할 수 없습니다.
이름과 식별자
SMILES
CC(C)NC1=NC(=NC(=N1)Cl)NC(C)C
IUPAC Name
6-chloro-2-N,4-N-di(propan-2-yl)-1,3,5-triazine-2,4-diamine
InChIKey
WJNRPILHGGKWCK-UHFFFAOYSA-N
InChI
1S/C9H16ClN5/c1-5(2)11-8-13-7(10)14-9(15-8)12-6(3)4/h5-6H,1-4H3,(H2,11,12,13,14,15)
이성체 SMILES
CC(C)NC1=NC(=NC(=N1)Cl)NC(C)C
WGK 독일
3
RTECS
XY5300000
분자량
229.71
Beilstein
747081
Reaxys
747081
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=747081&ln=

고급 데이터

Taxonomic Classification

Taxonomy Tree

KingdomOrganic compounds
SuperclassOrganoheterocyclic compounds
분류Triazines
SubclassAminotriazines
Intermediate Tree Nodes Not available
Direct Parent1,3,5-triazine-2,4-diamines
Alternative Parents Secondary alkylarylamines  N-aliphatic s-triazines  Chloro-s-triazines  Aryl chlorides  Heteroaromatic compounds  Azacyclic compounds  Organopnictogen compounds  Organochlorides  Hydrocarbon derivatives  
Molecular FrameworkAromatic heteromonocyclic compounds
Substituents 2,4-diamine-s-triazine - Chloro-s-triazine - Halo-s-triazine - Secondary aliphatic/aromatic amine - N-aliphatic s-triazine - Aryl chloride - Aryl halide - 1,3,5-triazine - Heteroaromatic compound - Azacycle - Secondary amine - Amine - Hydrocarbon derivative - Organonitrogen compound - Organochloride - Organohalogen compound - Organopnictogen compound - Organic nitrogen compound - Aromatic heteromonocyclic compound
설명This compound belongs to the class of organic compounds known as 1,3,5-triazine-2,4-diamines. These are aromatic compounds containing a 1,3,5-triazine ring which is 2,4-disusbtituted wit amine groups.
External Descriptors Triazine herbicides
3D 구조
상호 작용 화학 구조 모델





관련 대상(인간)
THRB Tclin Thyroid hormone receptor beta-1 (7926 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
GAA Tclin Lysosomal alpha-glucosidase (35701 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
GLP1R Tclin Glucagon-like peptide 1 receptor (111429 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
POLK Tbio DNA polymerase kappa (8653 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
APEX1 Tchem DNA-(apurinic or apyrimidinic site) lyase (38016 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
TDP1 Tchem Tyrosyl-DNA phosphodiesterase 1 (345557 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
SLCO1B1 Tchem Solute carrier organic anion transporter family member 1B1 (2672 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
관련 대상(비인간)
FTL Ferritin light chain (43324 Activities)
Activity TypeRelationActivity valueUnitsAction TypeJournalPubMed IddoiAssay Aladdin ID
작용 메커니즘
인증서(CoA, COO, BSE/TSE 및 분석 차트)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate Type날짜항목
C2126159C2126159Certificate of AnalysisAug 07, 2026 P265663
화학 및 물리적 특성
발화점(°C)11°C
분자량229.71
XLogP32.900
Hydrogen Bond Donor Count2
Hydrogen Bond Acceptor Count5
Rotatable Bond Count4
Exact Mass229.109 Da
Monoisotopic Mass229.109 Da
Topological Polar Surface Area62.700 Ų
Heavy Atom Count15
Formal Charge0
Complexity169.000
Isotope Atom Count0
Defined Atom Stereocenter Count0
Undefined Atom Stereocenter Count0
Defined Bond Stereocenter Count0
Undefined Bond Stereocenter Count0
The total count of all stereochemical bonds0
Covalently-Bonded Unit Count1
안전 및 위험(GHS)
픽토그램(들)
GHS08,   GHS09
신호
Warning
위험 문구

H351:Suspected of causing cancer

H400:Very toxic to aquatic life

H410:Very toxic to aquatic life with long lasting effects

주의 문구

P273:Avoid release to the environment.

P280:Wear protective gloves/protective clothing/eye protection/face protection.

P391:Collect spillage.

P405:Store locked up.

P501:Dispose of contents/container to an approved waste disposal plant.

P203:Obtain, read and follow all safety instructions before use.

P318:if exposed or concerned, get medical advice.

WGK 독일
3
RTECS
XY5300000
Reaxys
747081
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=747081&ln=
자주 묻는 질문과 기사
Citations of This Product
솔루션 계산기
리뷰

고객 리뷰

Application Protocols

While no item-specific validated protocols are provided for this product, the following general workflows are commonly used for triazine herbicide standards prepared in methanol (literature/guidance only):

  • LC–MS/MS calibration curve preparation

    • Allow vial to equilibrate to room temperature (sealed). Vortex briefly.
    • Prepare serial dilutions in methanol or initial mobile phase (e.g., 30:70 water:methanol with 0.1% formic acid) using class-A glassware. Use amber vials.
    • Include an isotopically labeled internal standard when possible. Prepare ≥6 calibration levels spanning expected concentrations. Store working solutions at 2–8°C, protected from light; remake periodically.
  • Matrix spike/recovery (environmental water)

    • Spike a known aliquot of the standard solution into pre-filtered sample or extract to achieve target concentration.
    • Process via your chosen cleanup (e.g., SPE, QuEChERS). Analyze by LC–MS/MS. Calculate recovery and matrix effects relative to solvent standards.
  • GC–MS screening (if applicable)

    • If GC is used, perform quantitative solvent exchange from methanol to a GC-compatible solvent (e.g., acetone or isooctane) under gentle nitrogen at ≤30°C. Verify recovery by back-calculation.

Note: Exact concentration of this product is not specified here; consult the CoA/label to compute dilution factors and to assess uncertainty.

Biological Roles

This section describes biological context for the solute, propazine (literature). It is provided for biochemical understanding only and not as a statement of use for this product.

  • Mode of action in plants: Propazine is a 1,3,5-triazine herbicide that inhibits photosystem II by binding to the D1 protein at the QB site, blocking electron transport from QA to plastoquinone. This disrupts photophosphorylation, leading to reactive oxygen species accumulation and plant death in susceptible species.
  • Selectivity: Tolerance in certain crop species arises from enhanced metabolic detoxification (e.g., N-dealkylation, hydroxylation, and subsequent conjugation) and differential uptake/transport.
  • Environmental fate (biochemical perspective): Microbial communities can mediate degradation via dealkylation and ring cleavage pathways; sorption to organic matter affects bioavailability. Hydrolysis is generally slow at neutral pH but can accelerate under alkaline conditions.
  • Bioaccumulation: Moderate hydrophobicity (logKow ~3) suggests limited but non-negligible potential for bioconcentration; however, strong sorption and metabolic turnover typically limit long-term accumulation relative to more lipophilic agrochemicals.

Note: The product is for research use only. No agricultural, environmental release, or in vivo use is implied by this listing. Researchers conducting environmental or biochemical studies should follow all regulations and institutional approvals.

Buffer Applications

Not typically applicable. Propazine is a neutral, hydrophobic analyte, and this product is supplied as a methanolic solution. It is not used as a buffering agent, nor does it participate in common buffer systems. For analytical applications, choose mobile phase buffers (e.g., ammonium formate/acetate) appropriate to your LC method separately.

Green Alternatives

Greenness considerations involve both the analyte lifecycle and the solvent matrix.

  • Solvent perspective (literature):

    • Methanol is a widely used polar protic solvent with relatively favorable green metrics compared to chlorinated solvents (readily biodegradable, low persistence) but carries high acute toxicity and flammability. Its production often uses syngas (fossil-derived), though bio-methanol is emerging.
  • Potential greener options for analytical work (context-dependent):

    • Ethanol: less toxic, renewable feedstocks available; higher viscosity and different elution strength may alter LC separations and MS response.
    • Aqueous-rich mobile phases: maximize water content in LC when feasible; maintain analyte solubility and peak shape.
    • Supercritical CO2 (SFC): for screening triazines with polar modifiers (MeOH/EtOH); reduces organic solvent consumption, but requires specialized instrumentation.
  • Comparison snapshot (literature, qualitative):

    • Methanol: strong elution for moderately hydrophobic analytes; excellent MS compatibility; high toxicity; high volatility enables easy solvent exchange.
    • Ethanol: greener/toxicity profile improved; slightly weaker elution strength vs MeOH in RP-LC; higher backpressure at same % organic.
    • Acetonitrile: superb chromatographic performance and low UV cut-off; less green (petrochemical, toxicity concerns) and supply volatility.

Trade-offs:

  • For validated methods specifying methanol, changing solvent can invalidate performance metrics. If greening is desired, consider reducing volumes (microflow LC), recycling waste, or switching to ethanol only after revalidation of critical performance parameters (resolution, sensitivity, robustness).
Pharmaceutical Uses

Not applicable. Propazine is an agricultural triazine and is not used as a pharmaceutical active or common excipient. This product is supplied for research use only (e.g., analytical standards, method development). No clinical or therapeutic applications are implied.

Physical Properties

Item-specific solution properties (concentration, density, refractive index, UV cutoff, impurity limits) are not specified for this item; refer to CoA/Spec Sheet.

Component properties (literature; for context only):

  • Propazine (solute)

    • Molecular formula: C9H16ClN5; MW ~229.71 g/mol
    • Physical state: typically solid at ambient temperature (literature)
    • LogP (Kow): reported ~2.8–3.4 (literature range; hydrophobic)
    • Aqueous solubility: low (mg/L range at 20–25°C; literature); freely soluble in polar organics such as methanol and acetonitrile
    • pKa: triazine ring nitrogens are weakly basic; conjugate acid pKa typically <2 (literature), thus largely neutral at neutral pH
  • Methanol (solvent)

    • BP ~64.7°C; MP ~−97.6°C; density ~0.7918 g/mL at 20°C; dielectric constant ~32.6 at 20°C (literature)
    • Completely miscible with water and most polar organic solvents

Practical notes (general):

  • The bulk physical behavior of the supplied solution (e.g., freezing point depression, vapor pressure) will be dominated by methanol at typical analytical concentrations of propazine.
  • For quantitative work (e.g., calibration), rely on the concentration and uncertainty stated on the CoA; if density-based dilutions are required, use measured or specified density for this lot (not provided here).
Quality and Grades
  • Item-specific grade/purity, concentration, stabilizer content, and analytical certification: Not specified for this item; refer to CoA/Spec Sheet.

General guidance for solution standards and research solutions:

  • Concentration and uncertainty: High-quality analytical solutions provide a gravimetrically prepared concentration with a stated uncertainty and traceability (e.g., to NIST). Verify on the CoA before use in quantitative methods (e.g., LC/GC calibration).
  • Solvent grade: For LC/GC applications, methanol is typically LC/MS or GC residue-analysis grade to minimize background and ensure low UV absorbance. Low-peroxide, low-water methanol improves stability and injection reproducibility; specific limits are supplier- and lot-dependent (not provided here).
  • Stabilizers: Triazine herbicides are generally stable in dry methanol when protected from light; stabilizers are usually unnecessary. If stabilizers are present (e.g., acid scavengers), they should be declared on the CoA (none specified here).
  • Suitability: This product is positioned for research and method-development use (environmental residue analysis, adsorption/degradation studies, or instrument calibration). For regulated testing, ensure the certificate meets your accreditation requirements (e.g., ISO/IEC 17034/17025) — inquire if needed.

Practical QC checks upon receipt:

  • Inspect container integrity and label for lot/concentration.
  • Equilibrate to room temperature before opening to prevent condensation.
  • If using for quantitative calibration, verify concentration by an orthogonal check (e.g., UV or LC with an independent standard), especially after long storage or transport.
Reaction and Applications

Primary use-cases for a propazine solution in methanol are analytical and research-focused rather than as a synthetic reagent.

Analytical applications (general):

  • Calibration standards for LC–UV/FLD or LC–MS/MS quantification of triazine herbicides in environmental matrices (water, soil extracts, food extracts). Prepare multi-point curves by serial dilution in MeOH or initial mobile phase; use matrix-matched calibration when appropriate.
  • System suitability and retention-time markers during method development for s-triazine separations on reversed-phase columns (C18, phenyl-hexyl). Evaluate selectivity vs atrazine/simazine under gradient profiles.
  • Recovery studies in SPE/QuEChERS workflows: spike known amounts into extracts to assess extraction efficiency and matrix effects.

Research applications:

  • Degradation studies (hydrolysis, photolysis, advanced oxidation) using a defined propazine input. Follow kinetics by LC–MS/MS; evaluate transformation products via accurate-mass MS.
  • Sorption and transport experiments in soils/sediments: create stock and working solutions to study Kd/Koc dependency on organic matter and pH.

Synthetic reactivity context (literature):

  • The s-triazine C–Cl in propazine is activated toward nucleophilic aromatic substitution (SNAr) and can, under forcing conditions, undergo displacement by nucleophiles (amines, thiolates). However, because this product is a methanolic solution intended for analytical use, employing it as a synthetic substrate is atypical; use neat propazine or triazine chlorides for preparative chemistry.

Practical tips:

  • Use amber glassware and minimize headspace to reduce photolysis and evaporation. Degas mobile phases if using MS detection to stabilize ionization.
Reaction Conditions

The supplied solution is typically used for analysis rather than synthesis. For researchers studying transformations, the following are general literature conditions for propazine and related s-triazines:

  • Hydrolysis (literature):

    • Acidic: slow under mild acidic conditions (pH 2–5, ambient); rates increase with strong acid and heat; products include dealkylated and dechlorinated species.
    • Alkaline: more rapid at pH ≥10, 25–60°C; SNAr by hydroxide at the C–Cl position yields hydroxytriazine derivatives. Monitor by LC–MS.
  • Photolysis (literature):

    • UV-A/UV-B irradiation in aqueous-organic mixtures (e.g., water/MeOH) can induce dealkylation and ring transformation; use quartzware; exclude oxygen or add sensitizers as needed. Kinetics depend strongly on wavelength and matrix.
  • Oxidative degradation (literature):

    • Advanced oxidation processes (e.g., •OH from H2O2/UV or sulfate radicals from persulfate/UV) in water with low % MeOH; pH 3–7; rapid degradation with formation of hydroxylated/dealkylated products.
  • SNAr substitution at C–Cl (synthetic context; literature):

    • Nucleophile (RNH2/RS−/RO−), base (e.g., DIPEA/NaHCO3), aprotic solvent (DMF/DMSO/MeCN), 25–100°C, hours to overnight; yields vary with nucleophile strength and sterics. Secondary amines may require elevated temperatures.
  • Analytical method conditions (illustrative; literature):

    • RP-LC: C18, 150 × 4.6 mm, 5 µm; mobile phase A water + 0.1% formic acid, B methanol; gradient 40→80% B over 10 min; UV 222–230 nm or MS (ESI+). Retention and sensitivity depend on column and matrix.

Note: Do not use the catalog solution as a reaction substrate without verifying concentration and removing methanol when incompatible.

Safety and Handling

Follow institutional chemical hygiene practices. Consult the SDS for this exact product/lot for authoritative information.

Item-specific safety fields (Product Data):

  • Storage: 2–8°C, protected from light; shipped on wet ice
  • GHS classification, pictograms, signal word, and H-statements: Not specified for this item; refer to SDS.

General hazards (literature; for context only):

  • Methanol: highly flammable liquid and vapor (GHS02); acute toxicity (oral/dermal/inhalation) and specific target organ toxicity (eyes/CNS/optic nerve) — typical H-codes include H225, H301/311/331, H370.
  • Propazine: harmful if swallowed; suspected reproductive effects and very toxic to aquatic life with long-lasting effects have been reported for triazines (e.g., H302, H361, H410 in some jurisdictions). Classification varies by supplier/region.

Handling and PPE:

  • Work in a fume hood. Avoid ignition sources. Wear lab coat, safety glasses or splash goggles, and appropriate chemically resistant gloves (e.g., nitrile). For large volumes or potential splash: face shield and flame-resistant lab coat.
  • Avoid inhalation and skin/eye contact. Prevent environmental release; collect waste as halogenated/organic solvent waste per local regulations.

First aid (overview; consult SDS):

  • Inhalation: move to fresh air; seek medical attention if symptoms persist.
  • Skin/eye contact: rinse with water for at least 15 minutes; remove contaminated clothing; seek medical advice for persistent irritation.
  • Ingestion: rinse mouth; do NOT induce vomiting; seek immediate medical attention (methanol risk).

Incompatibilities (general): strong oxidizers, strong bases/acids can accelerate degradation; avoid reactive metals and ignition sources.

Solvent Selection

This product is supplied as a solution in methanol, a polar protic, water-miscible solvent commonly used for LC/UV and LC–MS workflows.

  • Methanol profile (literature):

    • Polarity: high; dielectric constant ~32.6 (20°C)
    • Protic/H-bonding: donor and acceptor; facilitates dissolution of many moderately nonpolar organics like triazines while remaining miscible with water for aqueous mobile phases.
    • Volatility: BP ~64.7°C; evaporates rapidly, enabling easy solvent exchange and concentration steps at mild temperatures.
  • When to choose this product as-is:

    • LC method development using aqueous MeOH mobile phases (e.g., water/MeOH with formic acid or ammonium buffers) for triazines.
    • Sample preparation workflows where methanol facilitates protein precipitation or extraction prior to analysis.
  • When to consider alternatives (general):

    • If your validated method requires acetonitrile-based standards for chromatographic selectivity or lower viscosity at high organic content, consider solvent exchange under gentle conditions.
    • For GC workflows, neat standards or solutions in non-protic solvents (e.g., hexane, isooctane, acetone) may be preferred; perform solvent exchange quantitatively.
  • Miscibility and compatibility:

    • Fully miscible with water, ACN, acetone, and many polar aprotic solvents. Avoid mixing with strong oxidizers. Be mindful of material compatibility (e.g., some elastomers may swell in methanol).
Storage and Reconstitution
  • Item-specific storage: Store at 2–8°C, protected from light (per Product Data). Shipped on wet ice.
  • Stability considerations (general): Triazine herbicides are generally stable in dry methanol when shielded from light and heat. Evaporation of methanol can change concentration; minimize headspace and ensure caps are tightly sealed.
  • Container: Keep in original amber vial if supplied; if aliquoting, use amber glass with PTFE-lined caps to minimize adsorption and permeation.
  • Reconstitution: Not applicable; the product is supplied as a solution. If solvent exchange is necessary (e.g., to acetonitrile or water-rich media), perform quantitative transfer using calibrated glassware and gentle evaporation under inert gas. Verify concentration post-exchange.
  • Freeze–thaw: Avoid unnecessary freeze–thaw cycles; store refrigerated (not frozen) unless CoA specifies otherwise. If freezing is required, validate stability and avoid repeated cycles by preparing single-use aliquots.
  • Handling on receipt: Allow to equilibrate to room temperature before opening to avoid moisture condensation. Vortex gently to ensure homogeneity.
  • Shelf life: Not specified for this item; refer to CoA/Spec Sheet. For best results in quantitative analysis, prepare fresh working solutions regularly and monitor response factors with quality-control samples.
Structure and Identity

A prepared analytical solution of the triazine herbicide propazine in methanol, supplied for research and method-development use.

  • Item-specific identifiers (from Product Data)

    • Product name: Propazine Solution in Methanol (SKU: P265663)
    • CAS (propazine): 139-40-2
    • PubChem CID (propazine): 4937
    • InChIKey (as listed): 400096
    • Storage: 2–8°C, protected from light; shipped on wet ice
    • Research use only
  • Structural identity of the solute (propazine) — literature

    • Common name: Propazine; an s-triazine herbicide
    • Molecular formula (propazine): C9H16ClN5 (literature)
    • Molecular weight (propazine): ~229.71 g/mol (literature)
    • SMILES (propazine): CC(C)NC1=NC(Cl)=NC(NC(C)C)=N1 (literature)
    • Core scaffold: 1,3,5-triazine (s-triazine) ring bearing two secondary isopropylamino substituents (at C-2 and C-4) and one chlorine (at C-6)
    • Functional groups: electron-deficient heteroaromatic triazine; aryl chloride (activated toward SNAr); secondary amines (as substituents)
    • 2D description: six-membered alternating C/N aromatic ring (three ring nitrogens), para-related amino substituents across the ring nitrogens, single chloro at remaining carbon; no stereocenters in the ring; isopropyl substituents introduce branching but no defined stereochemistry in the standard drawing.
  • Solvent (matrix) — literature

    • Methanol (MeOH) CH3OH; MW 32.04 g/mol; polar protic, H-bond donor/acceptor

Note: Exact solution concentration, purity, stabilizers, and appearance are not specified for this item; refer to CoA/Spec Sheet.

Synthetic Utility

While this product is primarily intended as an analytical solution, understanding the solute’s reactivity can inform degradation and transformation studies (literature):

  • Electrophilic center: The s-triazine C–Cl bond in propazine is activated toward nucleophilic aromatic substitution (SNAr) due to the strongly electron-withdrawing ring nitrogens. Under basic or elevated-temperature conditions, displacement by nucleophiles (amines, thiolates, alkoxides) can occur to give substituted triazines.
  • Amino substituents: The two secondary isopropylamino groups can undergo oxidative or enzymatic N-dealkylation; in synthetic settings, strong bases/oxidants can effect transformations that mirror environmental metabolites.
  • Coordination/interaction: The triazine ring nitrogens can serve as weak ligands to metals or form H-bonds; such interactions are often exploited in supramolecular or materials studies with related triazine scaffolds.
  • Retrosynthetic note: For constructing tailored triazines, cyanuric chloride (2,4,6-trichloro-1,3,5-triazine) is generally preferred as a versatile electrophilic hub, enabling stepwise substitution under temperature control. Propazine itself is better viewed as a target/analyte rather than a building block.

Practical implication:

  • If chemical modification of propazine is desired for reference metabolite synthesis, use neat propazine (solid) and anhydrous aprotic media (e.g., DMF, DMSO) with controlled bases, rather than a dilute methanolic solution intended for analytical calibration.
Target Specificity

Not applicable. This product is a small-molecule solution (propazine in methanol), not an antibody, probe, or affinity reagent. No antigen/epitope specificity, clone, or isotype data apply.

자주 묻는 질문

How should this product be stored?
Store at 2–8 °C, protected from light. The material is light-sensitive — keep it in its original opaque or amber container.
How is this product shipped?
This product ships chilled on wet ice. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 139-40-2, the molecular formula is C9H16ClN5, and the molecular weight is 229.71 g/mol. InChIKey WJNRPILHGGKWCK-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.