Tefluthrin-d , CAS No.T1449904

CAS: T1449904 Cat. No.: T1449904 분자식: C17H9D5ClF7O2 분자량: 423.76
주문 가능
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
크기
USA
독일 (EU)*
가격
수량
1mg
T1449904-1mg
주문제작 · 8~12주
Enter a quantity for the sizes you want to add.

개요

Tefluthrin-d 5 is the deuterium labeled Tefluthrin.

사양

보관 조건
Store at -20°C
배송
Ice chest + Ice pads
이 제품은 콜드 체인 배송이 필요합니다.지상 및 기타 경제 서비스는 사용할 수 없습니다.
이름과 식별자
분자량
423.76

고급 데이터

인증서(CoA, COO, BSE/TSE 및 분석 차트)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
솔루션 계산기
리뷰

고객 리뷰

Application Protocols
  • Isotope-dilution LC-MS/MS (general example)
    • Prepare a primary stock of Tefluthrin-d in acetonitrile (e.g., 1 mg/mL). Serially dilute to working solutions (e.g., 10 µg/mL, 100 ng/mL). Store stocks at −20 °C in amber glass.
    • Spike a fixed volume of IS into all samples, calibration standards, and QCs prior to extraction (typical final IS level: 1–50 ng/mL in extract; optimize per method).
    • Extract matrix (e.g., QuEChERS for produce, SPE for water). Perform cleanup as required. Analyze by LC-MS/MS monitoring MRM pairs for tefluthrin and Tefluthrin-d.
    • Quantify using the analyte/IS peak area ratio versus a matrix-matched calibration curve.
  • GC-MS (general example)
    • Prepare IS in isooctane. Spike prior to extraction. Analyze on a low-bleed GC column with selected ion monitoring for analyte/IS ion clusters.
  • Quality control
    • Include method blanks, matrix spikes, duplicate samples, and continuous calibration verification. Evaluate surrogate and IS recoveries to accept/reject batches.
  • Note: The above are general guidelines. Item-specific protocols, concentrations, and transitions are not specified for this item; consult your method SOP and validate in your laboratory.
Biological Roles
  • Item focus
    • Tefluthrin-d is an isotopically labeled analytical standard; it is not intended to probe biological function directly. No biological activity data are provided for this item.
  • General context (literature, for tefluthrin/pyrethroids)
    • Pyrethroids act on insect voltage-gated sodium channels, altering gating kinetics and causing neuroexcitation. They are widely used in agriculture and public health pest control.
    • In mammalian systems, pyrethroids can interact with neuronal ion channels at higher exposures; however, the present product is for laboratory research/analytical use only, not for in vivo applications.
  • Research applications
    • Used to quantify tefluthrin in biological matrices (e.g., serum, urine, tissue extracts) for exposure assessment studies, toxicokinetic research, and in vitro metabolism assays, employing isotope-dilution MS.
    • Facilitates mass-balance studies by distinguishing spiked analyte from endogenous/background residues.
  • Note
    • Any specific bioactivity, binding constants, or ADME parameters for this deuterated material are not specified for this item; consult primary literature for the unlabeled compound where needed.
Buffer Applications
  • Not typically applicable. Tefluthrin-d is a hydrophobic, non-ionic organic analyte standard and is not used to prepare aqueous buffer systems or to control pH.
  • Practical note
    • If introduced into aqueous phases for LC-MS/MS, it is carried by organic co-solvents (e.g., acetonitrile, methanol). Aqueous buffers used in LC (e.g., ammonium formate/acetate, 2–10 mM) are selected based on the chromatographic method rather than properties of this analyte.
Green Alternatives
  • Context
    • While the analyte itself (tefluthrin) is not replaceable in targeted analysis, greener choices often exist for the solvents and sample-prep steps used with Tefluthrin-d.
  • Greener solvent options (general guidance)
    • Replace dichloromethane with ethyl acetate for liquid–liquid extraction where feasible.
    • Use ethanol or ethyl acetate in place of hexane/isooctane for some cleanup steps, acknowledging potential changes in recoveries and selectivity.
    • Prefer acetonitrile over acetonitrile/dichloromethane blends; consider water-acetonitrile mixes to reduce solvent use.
  • Comparison (general)
    • Hexane/isooctane: excellent GC compatibility and low polarity; poor EHS profile (flammable, VOC). Alternatives: cyclopentyl methyl ether (CPME) or ethyl acetate; verify GC performance.
    • Dichloromethane: strong eluent, fast evaporation; halogenated waste burden. Alternative: ethyl acetate or MTBE (with caution, peroxides), validated for recovery.
    • Acetonitrile: widely used in QuEChERS; acceptable green profile relative to chlorinated solvents; maintain water content to improve safety and reduce VOCs.
  • Trade-offs
    • Method performance (recoveries, matrix effects, partitioning) can shift with greener solvents. Validate changes with matrix spikes and CCV/QC samples.
  • Item-specific green attributes: Not specified for this item; refer to CoA/Spec Sheet.
Pharmaceutical Uses
  • This product is supplied strictly for research use only. No pharmacopeial monographs or excipient roles are specified for this item.
  • Relevant laboratory uses (general)
    • May be employed as an internal standard in analytical method development and validation (e.g., ICH Q2) for residue testing or exposure studies; however, it is not intended for human or veterinary formulation, clinical, or diagnostic use.
  • Item-specific regulatory status and grade: Not specified for this item; refer to CoA/Spec Sheet.
Physical Properties
  • Item-specific data (this product)
    • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
    • Purity/grade: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet (varies with deuterium incorporation).
  • Storage and shipping (from Product Data)
    • Storage: Store at −20 °C.
    • Shipping: Ice chest + ice pads.
  • General/literature guidance for tefluthrin (unlabeled)
    • Physical state: hydrophobic oily liquid or low-melting solid depending on formulation; very low water solubility; high solubility in nonpolar and moderately polar organic solvents (e.g., hexane, toluene, acetone, acetonitrile) — literature/general.
    • Volatility: lower than light hydrocarbons but can partition into headspace at room temperature — literature/general.
    • LogP: high (typical of pyrethroids; strong nonpolarity) — literature/general.
    • UV absorbance: aromatic/alkenyl chromophores allow UV detection (200–230 nm and higher) — literature/general.
  • Notes for deuterated analogs (general)
    • Deuteration minimally perturbs retention time vs unlabeled tefluthrin; exact RT shift depends on D positions (usually small). Vapor pressure and solubility are essentially comparable to the unlabeled compound. All item-specific numeric values: Not specified for this item; refer to CoA/Spec Sheet.
Quality and Grades
  • Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.
  • Typical expectations for isotope-labeled analytical standards (general)
    • Identity confirmation by high-resolution MS and/or NMR; isotopic enrichment reported as atom % D and labeling pattern; residual unlabeled analyte often controlled.
    • Purity expressed as chemical purity (by GC/LC) and isotopic purity (by MS). Low levels of volatile/non-volatile impurities reduce background in trace analysis.
  • What to look for on the CoA (practical guidance)
    • Exact deuteration pattern and enrichment.
    • Assay/impurity profile and residual solvents.
    • Recommended solvent for initial dissolution and stability guidance (light, temperature).
    • Intended use statement (research/analytical only) and storage instructions.
  • Stabilizers
    • If stabilizers are present in some lots of pyrethroids, they can affect MS baselines; this item’s stabilizer status: Not specified for this item; refer to CoA/Spec Sheet.
  • Fit-for-purpose notes (general)
    • For quantitative LC-MS/MS or GC-MS, isotope-labeled internal standards should co-elute with the native analyte and exhibit minimal H/D exchange; verify with a matrix-matched check standard prior to routine use.
Reaction and Applications
  • Primary application (this labeled compound)
    • Designed for use as an internal standard or surrogate in quantitative analysis of tefluthrin by GC-MS or LC-MS/MS. Enables isotope-dilution quantification to correct for extraction losses, matrix effects, and instrument variability.
  • Typical workflows (general)
    • Environmental monitoring: spike Tefluthrin-d into water, soil, sediment, air sampler extracts prior to extraction/cleanup; quantify native tefluthrin via analyte/IS response ratio.
    • Food/feed residue testing: add before QuEChERS or SPE cleanup; follow matrix-matched calibration.
    • Fate/degradation studies: track transformation pathways; the D-label facilitates distinguishing dosed compound from background contamination.
  • Practical tips
    • Add internal standard early in the workflow (prior to any extraction) at a fixed mass or concentration to all samples, calibrators, and QC materials.
    • Verify co-elution and absence of deuterium exchange under your chromatographic and sample-prep conditions.
    • Monitor one or more characteristic MRM/HRMS transitions for both analyte and IS with sufficient mass spacing to avoid cross-talk.
  • Synthetic chemistry note
    • This deuterated pyrethroid is not typically used as a building block or reagent; it is supplied for analytical and tracing applications in research laboratories.
Reaction Conditions
  • Not a reagent for synthetic transformations; however, the following general conditions pertain to analytical workflows using Tefluthrin-d.
  • GC-MS (general guidance)
    • Injection solvent: isooctane or hexane; splitless or pulsed splitless injection at 250–280 °C (per instrument limits). Column: low-bleed 5% phenyl polysiloxane or equivalent. Oven programs tailored to separate pyrethroids (e.g., 70→320 °C ramp). Monitor characteristic ions for analyte/IS.
  • LC-MS/MS (general guidance)
    • Mobile phase: water with 0–10 mM ammonium formate/acetate and acetonitrile or methanol. Gradient elution to 80–95% organic. ESI or APCI typically in positive mode for many pyrethroids; evaluate both sources for sensitivity. Use MRM transitions separated by the deuterium mass shift.
  • Sample preparation
    • QuEChERS for food matrices; SPE/NVC for water; hexane/acetone extraction for soils/sediments. Spike IS before extraction.
  • Stability checks
    • Assess carryover and adsorption by running solvent blanks and post-extraction spikes. Verify absence of H/D exchange under method conditions.
  • Expected performance
    • Calibration linearity typically across low ng/L to µg/L (or ng/g) levels with isotope dilution; exact ranges and recoveries are matrix/method dependent (literature/general). Item-specific performance data: Not specified for this item; refer to CoA/Spec Sheet.
Safety and Handling
  • Authoritative source: Always consult the SDS for Tefluthrin-d before use. Item-specific GHS classification, hazard statements (H-phrases), and pictograms: Not specified for this item; refer to CoA/Spec Sheet/SDS.
  • General hazards (literature/general for pyrethroids)
    • Pyrethroids can cause skin paresthesia and eye irritation; avoid dermal/ocular contact and inhalation of aerosols/vapors.
    • Environmental hazard: highly toxic to aquatic organisms; prevent release to the environment and collect all waste appropriately.
  • Recommended PPE and controls
    • Wear lab coat, nitrile gloves, and splash-resistant safety glasses; use in a fume hood, especially when preparing volatile standards or evaporating solvents.
    • Avoid generating dust/aerosols; use sealed autosampler vials and crimp caps for standards.
  • Incompatibilities and stability (general)
    • Avoid strong oxidizers, strong bases/acids at elevated temperature, and prolonged UV exposure; store in amber containers where possible.
    • Adsorption losses may occur on plastics; use glassware for stock solutions and sample storage.
  • First-aid overview (general)
    • Skin: Wash with soap and water; remove contaminated clothing.
    • Eyes: Rinse cautiously with water for several minutes; remove contact lenses if present and easy to do.
    • Inhalation: Move to fresh air; seek medical attention if symptoms persist.
    • Ingestion: Rinse mouth; seek medical advice. Provide SDS to responders.
Solvent Selection
  • Polarity and solubility (general/literature for tefluthrin)
    • Highly hydrophobic; readily soluble in nonpolar to moderately polar organics such as hexane, isooctane, toluene, dichloromethane, ethyl acetate, acetone, and acetonitrile. Practically insoluble in water.
  • Recommended solvents for standards (practical guidance)
    • GC methods: prepare stock in isooctane or hexane to minimize adsorption and ensure injector compatibility.
    • LC-MS/MS methods: acetonitrile or methanol stocks, with final diluent matched to starting mobile phase (e.g., 50:50 ACN:water with 0.1% formic acid if appropriate for the method).
  • Handling tips
    • Use amber glass vials; avoid plastic syringes where adsorption losses can occur. Pre-rinse syringes and autosampler vials with a small aliquot of the standard solution.
    • For low-ppb work, include 0.1–1% DMSO or isopropanol as a carrier to reduce wall losses (verify compatibility with your detection system).
  • When to choose alternatives
    • If method requires greener media, ethyl acetate or ethanol can substitute for halogenated solvents; confirm stability and recovery for your matrix.
  • Note: Item-specific solvent specifications are not provided; refer to CoA/Spec Sheet for any lot-specific recommendations.
Storage and Reconstitution
  • Storage (from Product Data)
    • Store at −20 °C. Shipments are made in an ice chest with ice pads to maintain the cold chain.
  • General handling
    • Keep tightly closed in amber glass vials under inert headspace (e.g., nitrogen or argon) to minimize oxidation and photolysis. Allow to equilibrate to room temperature before opening to avoid condensation.
    • Minimize freeze–thaw cycles by preparing single-use aliquots of stock solutions.
  • Reconstitution and stock preparation (general)
    • Dissolve in high-purity acetonitrile, methanol, hexane, or isooctane depending on the analytical platform. Typical primary stock: 0.1–1 mg/mL. Filter not required; avoid plastic consumables to reduce adsorption.
    • For LC use, prepare working solutions in acetonitrile or methanol; for GC use, prepare in isooctane/hexane. Match final diluent to starting mobile phase for best peak shape.
  • Stability notes
    • Protect from light and heat; verify stability by periodic comparison of response factors versus freshly prepared standards. Monitor for any evidence of deuterium exchange under aqueous or acidic/basic conditions.
  • Item-specific shelf life and solution stability: Not specified for this item; refer to CoA/Spec Sheet.
Structure and Identity
  • Item-specific identifiers
    • CAS: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
    • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
    • InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
  • Naming and class
    • Product name: Tefluthrin-d (stable-isotope–labeled analogue of tefluthrin; the exact sites/extent of deuteration are not specified for this item).
    • Compound type: Deuterated pyrethroid insecticide standard (research/analytical use).
  • Structural features (general, literature)
    • Tefluthrin is a fluorinated synthetic pyrethroid composed of a cyclopropanecarboxylate linked to a highly fluorinated aryl/alkenyl alcohol fragment; it is structurally related to other Type I pyrethroids (no cyano group) bearing multiple F and CF3 substituents.
    • Deuterated forms replace one or more non-exchangeable hydrogens with deuterium to provide a mass shift for isotope-dilution MS without altering chromatographic behavior significantly.
  • 2D description (general)
    • Ester functionality connecting a substituted cyclopropane carboxylate to a fluorinated benzyl/allylic alcohol moiety; multiple C–F and CF3 groups increase hydrophobicity and persistence. Stereocenters at the cyclopropane ring are typical of pyrethroids; exact stereochemistry and D-labeling pattern for this item: Not specified for this item; refer to CoA/Spec Sheet.
Synthetic Utility
  • Role in synthesis
    • Deuterated tefluthrin is not typically used as a synthetic intermediate due to its complexity and cost; it functions primarily as an analytical internal standard.
  • Potential research utility (general)
    • Mechanistic/environmental fate studies: the D-label enables tracing partitioning, adsorption/desorption, and degradation pathways in soils and sediments.
    • Metabolism and transformation studies: track biotic/abiotic conversion while differentiating from background contamination.
  • Retrosynthetic considerations (general background)
    • Pyrethroids comprise a substituted cyclopropanecarboxylate ester and a substituted benzyl/allylic alcohol motif. Stereochemical control at the cyclopropane and selective introduction of fluorinated groups are key steps; deuteration may be incorporated via labeled alcohol precursors or exchange-resistant positions. These are literature/general notes and not a specification of this item’s route.
Target Specificity
  • Not applicable. This product is a small-molecule analytical standard, not an antibody, enzyme, or ligand directed at a biomolecular target. No clone/isotype/epitope data are relevant.

Shall we send you a message when we have discounts available?

Remind me later

Thank you! Please check your email inbox to confirm.

Oops! Notifications are disabled.