Trypan Blue Staining Solution (0.2%) - BioReagent

Cat. No.: T1528811

등급 & 순도 BioReagent

Storage

Store at 2-8°C

Shipped In

Wet ice

개요

Trypan Blue is an anionic active dye and the most commonly used reagent for identifying dead cells in cell and tissue culture. The staining principle is based on the fact that viable cells possess intact membranes that exclude the dye, preventing its entry; whereas cells that have lost viability or membrane integrity exhibit increased permeability, allowing Trypan Blue to penetrate and stain the cells blue to pale blue. This enables a simple and rapid distinction between live and dead cells. Trypan Blue can also be phagocytosed by macrophages, making it applicable for in vivo macrophage staining. After staining, cell viability can be quantified by direct microscopic counting or image-based counting, using the formula: Cell Viability (%) = (Total Cells − Blue-Stained Cells) ÷ Total Cells × 100%. The procedure is straightforward, requiring only 3–5 minutes of staining at room temperature. Note: Prolonged staining should be avoided, as extended incubation may lead to dye uptake by viable cells, resulting in underestimated viability. Trypan Blue is potentially toxic and classified as a suspected carcinogen; appropriate personal protective equipment (lab coat and disposable gloves) should be worn during handling. For research use only. Not for clinical diagnosis.

사양

사양 및 순도

BioReagent

보관 조건

Store at 2-8°C

배송

Wet ice

이 제품은 콜드 체인 배송이 필요합니다.지상 및 기타 경제 서비스는 사용할 수 없습니다.

등급

BioReagent

Product Line

생물 제품

Application Protocols

General protocol for Trypan Blue exclusion counting with 0.2% solution (literature guidance; adjust to your SOP):

• Sample preparation: Gently resuspend cells to obtain a uniform suspension free of clumps. If clumping persists, consider gentle trituration or DNase treatment if compatible with downstream use.
• Mixing: Combine the cell suspension and 0.2% Trypan Blue in a defined ratio (commonly 1:1 for 0.4% solutions; for 0.2% solutions, many labs use lower dye fractions, e.g., 1 part dye to 1–4 parts sample depending on cell type). Record the exact dilution factor used for calculations.
• Incubation: Mix gently and incubate at room temperature for ~2–5 minutes. Avoid prolonged exposure (>10 minutes), which may increase false positives in stressed cells.
• Loading: Fill both chambers of a cleaned hemocytometer with the stained suspension, avoiding bubbles. Allow cells to settle briefly.
• Counting: Under brightfield, count unstained (viable) and blue-stained (non-viable) cells in the prescribed grid squares. Apply the dilution factor and chamber volume to calculate cell concentration and percent viability.
• QC: Include a known healthy control sample to verify expected low blue uptake.

Note: For automated cell counters, follow the instrument’s validated protocol for 0.2% Trypan Blue, including any specified mixing ratios and timing.

Biological Roles

Trypan Blue functions as a membrane integrity exclusion dye (literature; general biology). It does not cross intact plasma membranes of viable cells but readily enters cells with compromised membranes, binding intracellular components and producing a strong blue coloration visible by brightfield microscopy.

Key points (general):

• The assay distinguishes viable (unstained) from non-viable (blue-stained) cells, supporting rapid viability determinations in a variety of cultures (mammalian, insect, yeast with appropriate preparation).
• The dye’s anionic, sulfonated structure promotes aqueous solubility and membrane exclusion under normal conditions.
• Staining is typically performed at room temperature with short exposures (minutes), minimizing physiological perturbation of viable cells.
• Because the mechanism relies on membrane integrity, early apoptotic cells with intact membranes may still exclude the dye; pairing with complementary assays (e.g., Annexin V/PI) can refine interpretation when needed (general practice).

Note: This product is labeled For research use only and is intended for laboratory workflows, not for diagnostic or therapeutic use.

Buffer Applications

This item is not a buffer; it is a 0.2% aqueous staining solution. It is, however, routinely mixed with buffered cell suspensions during viability assays.

Practical guidance (general):

• Compatible with isotonic buffers such as PBS/DPBS and many serum-containing media for short staining times.
• When preparing cell suspensions for counting, maintain physiological osmolality to preserve membrane integrity and reduce false-positive staining.
• Avoid strong acids/bases and high osmolarity solutions that may perturb membranes and confound viability results.
• If dilution of the staining solution is required by your SOP or instrument, use sterile, filtered PBS/DPBS to maintain consistency.

No specific buffer recipes or pH ranges are specified for this product; refer to your lab’s standard counting protocol.

Green Alternatives

This product is an aqueous, ready-to-use dye formulation, which reduces handling of dye powders and organic solvents.

Sustainability considerations (general):

• Aqueous matrix avoids VOC emissions and flammable solvent hazards associated with many histological stains.
• Ready-to-use format can reduce waste from trial dilutions and minimize user exposure to concentrated dye.

Potential alternatives and trade-offs (literature/general):

• Propidium iodide (PI) or 7-AAD in buffered solutions: enable flow cytometry; require nucleic acid binding and specific instrumentation; hazardous waste considerations apply.
• Erythrosin B (aqueous): sometimes used as a less hazardous exclusion dye; color contrast may be lower and protocols differ.
• AO/PI mixtures: high-content viability readouts, but involve additional reagents and light sensitivity.

Simple comparison (general):

• Trypan Blue (0.2% aqueous): simple brightfield readout; compatible with basic microscopes; hazardous waste still required for dye-containing solutions.
• Fluorescent dyes: higher sensitivity but increased energy use (instrumentation), cost, and waste stream complexity.

Waste management:

• Collect dye-containing liquids and contaminated disposables as chemical hazardous waste per local regulations to prevent aquatic release.

Pharmaceutical Uses

This product is supplied for research use only and is not intended for use as an excipient or in pharmaceutical manufacturing.

General context (literature):

• Vital dyes are sometimes used in analytical or QC laboratory settings for counting or assessing cell-based materials, but this is outside of regulated drug product formulation.

Item-specific note:

• No pharmacopeial status, compendial monograph alignment, or excipient role is provided. Any application within GMP or regulated environments should be supported by an internal qualification plan and the product’s CoA/SDS.

Physical Properties

Item-specific physico-chemical specifications for this 0.2% aqueous staining solution are not provided in the product data.

• Appearance: Not specified for this item; refer to CoA/Spec Sheet.
• Concentration: 0.2% (w/v) dye in water (item-specific).
• Density, refractive index, pH, conductivity, UV-Vis absorbance profile: Not specified for this item; refer to CoA/Spec Sheet.
• Solubility: As supplied, water-based and miscible with aqueous buffers (general property of the formulation type).
• Boiling point / melting point of solution: Not typically specified; refer to CoA/Spec Sheet.

Literature/general properties of the dye (not item specifications):

• Trypan Blue exhibits strong absorption in the visible blue region, enabling visualization under light microscopy; typical λmax for trypan blue dye occurs in the visible spectrum, but exact values vary with formulation and pH (literature).
• The dye is highly water soluble as its sulfonate salt (literature).

Practical notes:

• Because it is a dilute aqueous solution, handling is analogous to other water-based biological stains; avoid evaporation that could shift effective dye concentration.
• If optical quantification is intended (e.g., spectrophotometric QC), consult the product-specific CoA for any stated absorbance criteria.

Quality and Grades

• Grade/Purity: BioReagent (item-specific)

What BioReagent typically implies (general guidance):

• Suitable for biological and cell culture-adjacent workflows, with attention to low levels of contaminants that might interfere with microscopy or counting.
• Batch-to-batch consistency for staining performance and minimal particulate matter, aiding use in hemocytometry and imaging.

Item-specific notes:

• Exact impurity profile (e.g., trace metals, microbial limits, preservatives, or UV specifications) is Not specified for this item; refer to CoA/Spec Sheet.
• The dye concentration is controlled at 0.2% (w/v) to support direct use without dilution in many protocols that specify low-concentration trypan blue.

Practical QC considerations for users (recommended incoming checks):

• Visual clarity (absence of precipitate or microbial growth), consistent hue.
• Optional absorbance check at the dye’s visible band to confirm lot-to-lot uniformity (use the CoA for acceptance criteria, if provided).
• Performance check: verify expected exclusion staining on a small aliquot of representative cells prior to critical counting sessions.

Reaction and Applications

This product is intended for use as a vital dye staining solution in cell biology workflows, not for synthetic reactions.

Typical laboratory applications (literature/general):

• Cell viability exclusion assays: non-viable cells with compromised membranes uptake Trypan Blue and appear blue under brightfield, whereas viable cells exclude the dye.
• Manual cell counting with a hemocytometer (e.g., Neubauer, Bürker) using brightfield microscopy.
• Automated cell counters: compatible with instruments that support Trypan Blue contrast for viability measurements; follow instrument guidelines for dilution factors.
• Rapid viability checks during cell thaw, passage, transfection setup, or prior to seeding assays.

Practical tips:

• Gently mix cell suspensions before adding the dye to ensure representative sampling. Avoid bubbles and prolonged exposure that can artifactually stain stressed cells.
• Record the dilution factor used for calculating absolute cell concentration and percent viability.
• For sticky or clumping cells, incorporate gentle trituration or DNase (if appropriate to the sample) prior to staining to improve counting accuracy.
• Minimize light exposure and extended incubation times that can lead to background or morphological changes (general practice).

Reaction Conditions

Not applicable. This BioReagent is intended for cell staining, not for use in chemical reactions. There are no catalytic, thermal, or stoichiometric reaction conditions associated with its intended application.

Operational conditions for staining (general, non-binding): ambient temperature, short contact times (minutes), and direct observation by brightfield microscopy. For any binding acceptance criteria or incubation specifics, follow your laboratory SOP or instrument manufacturer’s guidance.

Safety and Handling

Safety details specific to this catalog item are not listed in the provided data; always consult the product SDS for authoritative guidance.

• GHS classification, signal word, H-statements, pictograms: Not specified for this item; refer to SDS.
• General hazard context (literature): Trypan Blue has been historically handled with care due to potential mutagenicity concerns reported for dye powders; exercise prudent laboratory precautions even in dilute solution.

Good laboratory practice (recommended):

• Wear appropriate PPE: lab coat, gloves, and eye protection when handling the solution and stained samples.
• Avoid ingestion, inhalation of aerosols, and skin or eye contact. Work with care to prevent spills and splashes; handle near a sink or absorbent pads.
• Use dedicated pipette tips and dispose of dye-containing waste according to institutional chemical waste procedures; avoid discharge to drains without approval.
• Incompatibilities: Strong oxidizers and reducing agents may affect dye integrity (general chemical incompatibility for azo dyes; literature). Do not mix with strong acids/bases unless validated, as pH extremes can alter dye ionization and color.
• First aid (overview; defer to SDS): In case of skin/eye contact, rinse with water for several minutes; if inhaled as aerosol, move to fresh air; if ingested, seek medical advice. Provide SDS to responders.
• Spill response: Contain with inert absorbent, collect as hazardous waste, and decontaminate surfaces with water/detergent.

Solvent Selection

This product is itself an aqueous staining solution and is not used as an organic solvent.

• Polarity/miscibility: Fully water-based, readily miscible with standard isotonic buffers (e.g., PBS, DPBS) and typical cell suspensions (general property).
• Use context: Designed to be combined directly with cell suspensions for viability exclusion assays and manual or automated counting.

When to choose this 0.2% formulation versus alternatives:

• Choose 0.2% when working with sensitive or small cells where lower dye concentrations minimize potential osmotic or optical artifacts, or when protocols explicitly specify 0.2%.
• Alternatives include 0.4% trypan blue solutions (more common in some legacy protocols) or other viability dyes (e.g., propidium iodide, erythrosin B, or AO/PI mixtures), selected based on instrumentation and downstream needs (general literature).

Compatibility notes:

• Suitable with isotonic saline, PBS/DPBS, and many serum-containing media for short incubations used in counting workflows.
• Avoid strong acid/base environments that could alter dye ionization and color balance (general dye behavior).

Storage and Reconstitution

• Storage conditions: Store at 2–8°C (item-specific). Protect from light to maintain dye integrity (general best practice for dyes).
• Shipping: Shipped on wet ice (item-specific).
• Reconstitution: None required; ready-to-use 0.2% (w/v) aqueous solution.
• Freeze/thaw: Not specified for this item; refer to CoA/Spec Sheet. As a general precaution, avoid freezing to prevent potential precipitation or container stress.
• Handling: Minimize contamination by using sterile technique when contacting cell suspensions. Do not return used aliquots to the stock bottle.
• Shelf life/expiry: Not specified for this item; refer to CoA/Spec Sheet.

Before use, equilibrate to room temperature if required by your SOP, mix gently to ensure homogeneity, and visually inspect for precipitates or microbial growth. Discard if abnormalities are observed or if the product is past its labeled expiry.

Structure and Identity

This product is a ready-to-use aqueous dye formulation: a 0.2% (w/v) Trypan Blue Staining Solution for cell viability exclusion assays.

• Item form: pre-formulated aqueous solution, 0.2% (w/v)
• Active component: Trypan Blue (vital dye) — an anionic diazo dye bearing multiple sulfonate groups (general chemistry description; literature)
• Functional groups (dye molecule; literature): azo (–N=N–) linkages, aromatic rings, sulfonate substituents (typically as sodium salts), conferring strong blue color and water solubility
• Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
• Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
• SMILES: Not specified for this item; refer to CoA/Spec Sheet.
• InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
• CAS: Not specified for this item; refer to CoA/Spec Sheet.

2D structural description of the dye (literature): two symmetrically substituted aromatic systems bridged by azo bonds, each ring bearing a sulfonate group to enhance aqueous solubility. No stereocenters. The formulation contains the dye dispersed in water (and, where applicable, buffering salts or preservatives if declared on the CoA; not specified here).

Synthetic Utility

Not typically applicable. This product is a finished aqueous staining solution and is not used as a building block, reagent, or solvent in chemical synthesis.

General note (literature): Azo dyes like trypan blue can serve as pH- or redox-responsive chromophores in analytical chemistry demonstrations, but such uses are outside the intended scope of this BioReagent solution.

Target Specificity

Not applicable. This product is not an antibody or targeted binding reagent. It is a membrane integrity exclusion dye used for differentiating live and non-viable cells by permeability, without molecular target specificity.