GRADE & PURITYBioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.Biochemical?Biochemical grade — purity suited to biochemistry experiments and preparations. Use for enzyme, protein, and metabolic work where biocompatibility matters.See COA
T3/KLH is an antigen-adjuvant conjugate formed by the coupling of T3 (thyroid hormone) with keyhole limpet hemocyanin (KLH). By coupling the antigen with the protein adjuvant , the production of antigen-specific antibodies in vaccine models can be enhanced. The conjugate does not affect protein folding or disrupt major epitopes, and it can enhance cross-presentation and the generation of antigen-specific T cells.
Product Overview
Target
Triiodothyronine
Nature
Synthetic
Conjugate
mcKLH
Format
Liquid
Concentration
Please refer to the vial lablel for the specific concentration.
Buffer
0.01M pH7.4 PBS.
Storage
Aliquot and store at -20 °C. Avoid repeated Freeze/Thaw cycles. Store in the Dark.
Restrictions
For Research Use Only. Not for use in diagnostic procedures.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Reviews
Customer Reviews
Application Protocols
Tested applications, recommended dilutions, and positive controls: Not specified for this item; refer to CoA/Spec Sheet.
General considerations (non-validated, literature-based):
For ELISA plate coating, researchers often prefer T3–BSA/OVA as the solid-phase antigen to minimize anti-KLH background, using T3/KLH for immunization. If using T3/KLH on plates, include anti-carrier controls.
For immunization workflows, follow institutional animal care and use guidelines for antigen dose, adjuvant choice, and schedule; optimize based on hapten density and carrier protein.
Always include appropriate negative and competition controls (free T3) when assessing antibody specificity.
These points are general and not specific recommendations for this product lot.
Biological Roles
Item-specific biological roles: Not specified for this item; the product is supplied for research use as a conjugate.
General/literature context:
T3 (3,3′,5-triiodo-L-thyronine) is a thyroid hormone that binds nuclear thyroid hormone receptors (TRs) and modulates transcription of genes involved in metabolism, development, and differentiation. In research, T3 serves as a ligand in studies of receptor biology and gene regulation.
KLH (keyhole limpet hemocyanin) is a large, oxygen-transport protein from mollusks. In biomedical research, KLH is used principally as a carrier to convert non-immunogenic small molecules (haptens) into potent immunogens by multivalent display.
In a T3/KLH conjugate, T3 does not serve its native endocrine role; rather, it functions as an antigenic determinant presented on the KLH surface for immunochemistry purposes (e.g., antibody generation or assay development).
Antigen presentation considerations (literature): linker length and conjugation site on T3 can significantly influence the orientation and accessibility of the hapten, affecting the specificity and affinity of antibodies raised against it.
Note: This product is for research use only and is not intended for diagnostic or therapeutic use.
Buffer Applications
Applicability: Relevant, as this conjugate is handled and used in aqueous buffer systems for immunochemistry.
General/literature guidance:
Reconstitution/storage buffers: PBS (10–50 mM phosphate, 150 mM NaCl, pH 7.2–7.4) or TBS (20–50 mM Tris, 150 mM NaCl, pH 7.4–7.6). Include 0.02–0.05% sodium azide only if compatible with downstream applications and if enzyme labels are not used.
Coating buffers (for microplates): carbonate–bicarbonate buffer (50–100 mM, pH 9.4–9.6) can enhance passive adsorption for ELISA plate coating. After coating, block with protein-based blockers (e.g., BSA, casein) tailored to minimize cross-reactivity.
Stabilizers/cryoprotectants: glycerol (up to 50% v/v for −20°C storage) or sugars (trehalose) can help minimize freeze–thaw damage; verify compatibility with assays.
Filtration: sterile-filter (0.22 µm) after reconstitution if sterility is required for extended storage.
Avoid chelators or heavy metal contaminants that could affect hemocyanin structure; use high-purity buffers and dedicated protein-grade reagents.
Item-specific buffer recommendations: Not specified for this item; refer to CoA/Spec Sheet.
Green Alternatives
Context: Green chemistry considerations for protein–hapten conjugates focus on buffer selection, waste minimization, and sustainable sourcing rather than solvent replacement.
Opportunities (general/literature):
Aqueous-only workflows: conduct all dilutions, coatings, and storage in aqueous buffers, eliminating organic solvent use.
Buffer preparation: use concentrated buffer stocks to reduce packaging and transport emissions; prepare on demand to minimize waste.
Stabilizers: prefer benign stabilizers (e.g., trehalose, glycerol in modest amounts) when compatible with the application; avoid azide if downstream enzymatic assays or HRP systems are used.
Sourcing: KLH is traditionally harvested from keyhole limpets; consider carriers produced via recombinant technology or synthetic polymers when sustainability or animal-free considerations are paramount.
Recombinant carriers (e.g., CRM197, recombinant KLH fragments): consistent supply; potentially reduced ecological impact; may differ in epitope profile and cost.
Note: No item-specific environmental certifications or green attributes are specified for this product; refer to CoA/Spec Sheet for any additional information.
Pharmaceutical Uses
This product is not intended for pharmaceutical use. No pharmacopeial status or excipient role is provided for this item.
General note:
T3/KLH conjugates are research tools used in immunochemistry (e.g., as immunogens or assay antigens). They are not formulated as drug substances or excipients. Any consideration of clinical or diagnostic application would require purpose-built materials and regulatory qualification not applicable here.
Item-specific regulatory/compendial information: Not specified for this item; refer to CoA/Spec Sheet.
Physical Properties
Item-specific physical constants (BP, MP, density, refractive index, logP, pKa, solubility): Not specified for this item; refer to CoA/Spec Sheet.
General/literature guidance for T3/KLH-type bioconjugates:
Physical state: typically supplied lyophilized or in buffered aqueous solution; proteinaceous material forms clear to slightly opalescent solutions when reconstituted at neutral pH.
Solubility (literature):
Readily soluble/dispersible in common physiological buffers (e.g., PBS, TBS) at pH ~7.2–7.6.
Insoluble in most organic solvents; organic co-solvents >10–20% v/v can denature proteins.
pH stability (literature): protein conjugates are generally most stable near neutral pH; extreme pH can hydrolyze linkers or denature KLH.
Temperature sensitivity: prolonged exposure to ambient or elevated temperatures can promote aggregation and loss of antigenicity; maintain cold chain.
Light sensitivity: iodinated aromatic haptens can be light-sensitive; protect from light to minimize photodeiodination or oxidative changes.
Heterogeneity: conjugates exhibit broad mass distributions; analytical characterization commonly uses UV–Vis (protein/hapten absorbance), SDS-PAGE (qualitative), and occasionally MALDI for average loading (literature).
BioReagent: suitable for biological research applications; produced and handled to minimize contaminants that interfere with common biochemical assays.
Biochemical: denotes use in biochemical workflows (e.g., immunochemistry, assay development). While high quality, it is not a cGMP pharmaceutical grade and is not intended for human or veterinary use.
Hapten density (T3 per KLH): a critical performance parameter for immunogen or coating antigen behavior; optimal ranges vary by application. Not specified for this item; refer to CoA/Spec Sheet.
Purity and residuals: unconjugated hapten and low–MW byproducts are typically removed by dialysis or size-exclusion; specifics not provided for this item.
Protein integrity: assessed by UV–Vis (A280), SDS-PAGE, and sometimes SEC to evaluate aggregation; item-specific data not provided.
Additives/stabilizers: presence of preservatives (e.g., sodium azide) or carrier proteins is not specified for this item; refer to CoA/Spec Sheet.
Documentation:
For lot-specific conjugation method, concentration, and quality metrics, consult the Certificate of Analysis (CoA) and Specification Sheet for this SKU (T1440304).
Reaction & Applications
Item-specific manufacturer applications: Not specified.
General/literature applications for T3/KLH conjugates:
Immunogen for antibody generation: KLH-conjugated T3 is widely used to elicit anti-T3 antibodies in animals. The multivalent display of T3 on KLH enhances immunogenicity of the small-molecule hapten.
Assay reagents: used as a coating antigen or as a competitor in competitive immunoassays (e.g., ELISA, EIA) for T3 quantification in research matrices. Typically, conjugates to non-KLH carriers (e.g., BSA) are used for coating to avoid anti-KLH background; nonetheless, T3/KLH can serve in optimization or alternative assay formats.
Method development: useful for screening hapten density vs. antibody affinity/specificity during assay development.
Conjugation chemistry context: T3 hapten is often derivatized (e.g., succinylated or diazotized) to couple to KLH lysines via amide or azo linkages using EDC/NHS or diazonium strategies (literature). The exact chemistry for this item is not specified.
Practical notes:
Protect from light throughout handling to preserve the iodinated hapten.
Avoid surfactants that may alter antigen presentation unless validated for your assay.
For immunization workflows, formulate with appropriate adjuvants per institutional guidelines; for assay uses, verify lack of cross-reactivity with carrier proteins in controls.
Reaction Conditions
Item-specific reaction conditions: Not applicable; this product is a finished conjugate.
General/literature conditions for preparing T3–carrier conjugates (for context only; not instructions for this item):
EDC/NHS amide coupling: activate carboxylated T3 derivative with NHS in MES buffer (pH ~5–6), then couple to carrier protein lysines in PBS (pH ~7.2–7.4). Control molar ratios and time to tune hapten density; quench residual actives with Tris or ethanolamine.
Azo coupling (diazotization): form diazonium derivative of an aniline-functionalized T3 under cold, acidic conditions; couple to tyrosine residues on carrier at basic pH; carefully control temperature and stoichiometry to limit over-modification.
Purification: remove small-molecule reagents and unconjugated hapten by dialysis or gel filtration into the final storage buffer.
These are literature frameworks and may not reflect the method used for this product. For exact details of T1440304, consult the CoA/Spec Sheet.
Safety & Handling
GHS and hazard classification for this specific item: Not specified for this item; refer to SDS.
General precautions for protein–hapten conjugates (literature/good laboratory practice):
PPE: lab coat, gloves (nitrile), and safety glasses. Avoid aerosol generation and inhalation of proteinaceous dusts or sprays.
Allergenicity: protein carriers (e.g., KLH) may cause allergic sensitization in susceptible individuals; handle in a biosafety cabinet if aerosolization is possible.
Iodinated hapten considerations: avoid exposure to strong oxidants or light; use amber containers.
Incompatibilities: avoid strong acids/bases, oxidizers, reducing agents (can disrupt linkages or protein structure), and organic solvents that denature proteins.
First aid (overview; defer to SDS):
Skin/eyes: rinse with water for 15 minutes; remove contaminated clothing.
Inhalation: move to fresh air; seek medical attention if symptoms persist.
Ingestion: rinse mouth; do not induce vomiting; seek medical attention.
Spill response: absorb aqueous solutions with inert material; clean with mild detergent; decontaminate surfaces using appropriate disinfectants.
Waste: dispose of proteinaceous laboratory waste according to institutional biosafety and chemical waste protocols.
Transport/storage risks: maintain cold chain; avoid repeated freeze–thaw to prevent aggregation and loss of activity/recognition epitopes.
Solvent Selection
Applicability: As a protein–hapten conjugate, this product is intended for use in aqueous buffers rather than organic solvents.
General/literature guidance:
Preferred media: phosphate-buffered saline (PBS), Tris-buffered saline (TBS), or carbonate/bicarbonate buffers for coating applications (pH 9–9.6), depending on downstream use.
pH considerations: maintain near-neutral pH for storage/use unless intentionally using alkaline carbonate buffer for microplate coating.
Ionic strength: moderate ionic strength (e.g., 0.15 M NaCl) helps maintain protein solubility and minimizes nonspecific adsorption.
Avoid: high concentrations of organic co-solvents, strong acids/bases, and denaturants (urea, guanidinium) unless specifically required for an assay format.
Small comparison (literature):
PBS (pH 7.2–7.4): stable storage and general handling.
TBS (pH 7.4–7.6): alternative to PBS; some assays show reduced background in TBS.
Carbonate buffer (pH ~9.6): enhances passive adsorption to polystyrene for ELISA plate coating; not optimal for long-term storage.
Tip: Filter buffers (0.22 µm) and use low-protein-binding plastics/glassware to minimize sample loss. Include carrier proteins (e.g., BSA) only if compatible with downstream assays; carrier proteins can compete in antigen-binding assays.
Storage & Reconstitution
Item-specific conditions (from Product Data):
Storage: Store at −20°C. Protect from light. Avoid repeated freezing and thawing.
Shipping: Shipped in ice chest with ice pads to maintain cold chain.
General/literature best practices:
Upon receipt, inspect for container integrity and keep product cold and protected from light.
If lyophilized: reconstitute with sterile, protein-compatible buffer (e.g., PBS or TBS, pH ~7.4). If supplied in solution, maintain buffer conditions as provided; do not rapidly dilute into hypotonic or low-ionic-strength media.
Aliquoting: prepare single-use aliquots to prevent freeze–thaw cycles; use low-protein-binding tubes.
Stabilizers: addition of glycerol (up to 50% v/v) or sugars (e.g., trehalose) can improve freeze–thaw stability; verify assay compatibility before use.
Short-term storage: 2–8°C for hours to a few days may be acceptable if protected from light; for longer-term storage, −20°C or below is recommended per Product Data.
Do not vortex vigorously; gently invert or pipette to mix. Avoid foaming.
Item-specific concentration, buffer composition, and presence of preservatives: Not specified for this item; refer to CoA/Spec Sheet.
Structure & Identity
Item-specific identifiers (CAS, CID, InChIKey, SMILES, elemental formula, molecular weight): Not specified for this item; refer to CoA/Spec Sheet.
General/literature description (for context):
T3/KLH typically denotes a conjugate of the small-molecule hapten triiodothyronine (T3; 3,3′,5-triiodo-L-thyronine) covalently linked to the carrier protein KLH (keyhole limpet hemocyanin).
Structural features (literature):
T3 is an iodinated diphenyl ether derivative of the amino acid tyrosine with a phenolic hydroxyl, a secondary amino acid side chain (as part of thyronine), and three iodine substituents on the aromatic rings.
KLH is a large, copper-containing, highly immunogenic molluskan hemocyanin protein (mega-dalton scale) used as a carrier to elicit strong antibody responses to haptens.
Typical 2D depiction (literature, conceptual): a T3 moiety coupled via a linker (often a succinyl/activated ester or diazotization chemistry) to lysine residues on the KLH surface, yielding a heterogeneous, multi-hapten display on the protein scaffold.
Notes:
Degree of substitution (hapten density), linker identity, and exact conjugation chemistry are not specified for this item; refer to CoA/Spec Sheet.
Because this is a heterogeneous bioconjugate, a single precise molecular weight or formula is not usually assigned; characterization is typically given as protein concentration and hapten-to-protein ratio (literature).
Synthetic Utility
Not a synthetic building block in the classical organic-chemistry sense. However, from a bioconjugation perspective (general/literature):
Functional groups engaged: T3 derivatives are often pre-functionalized (e.g., carboxylate via succinylation) for amide formation to KLH lysines using carbodiimide (EDC/NHS) chemistry; alternatively, diazotization targets phenolic rings for azo coupling to tyrosines.
Linker design: Spacer length and chemistry influence hapten accessibility and resultant antibody specificity/affinity. Common linkers include succinyl, glutarate, or PEG-based tethers.
Analytical verification: hapten loading estimated by UV–Vis differential spectra, amino group depletion assays (TNBS), or mass spectrometry (MALDI) on smaller carrier analogs; KLH’s size can limit some analyses.
Cross-carrier translation: For assay development, the same hapten is often conjugated to BSA or OVA for plate coating, while KLH conjugates are reserved for immunization to reduce anti-carrier interference.
Item-specific synthetic/conjugation details: Not specified for this item; refer to CoA/Spec Sheet.
Target Specificity
Item-specific target specificity (antigen, clone, isotype, species reactivity): Not specified for this item; refer to CoA/Spec Sheet.
General note:
As a hapten–carrier conjugate, the immunodominant determinant is the T3 hapten. Antibodies raised against T3/KLH typically recognize T3 and may display varying cross-reactivity with related iodothyronines depending on conjugation chemistry and hapten presentation (literature). Exact specificity depends on immunization and screening conditions and is not defined for this product listing.
Frequently Asked Questions
What does Biochemical mean?
Biochemical indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at ?20 °C, protected from light. Avoid repeated freeze–thaw cycles. Aliquot into single-use volumes before freezing.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Need help choosing the grade?
Our grade selection guide covers purity, stabilizer status, and application suitability for all variants in our catalog.
We use cookies to ensure the website functions properly and, where permitted, to improve your experience. You can manage your preferences at any time in Settings. Learn more in our Cookie Policy.
Shall we send you a message when we have discounts available?
Remind me later
Thank you! Please check your email inbox to confirm.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.