QUALITÉ & PURETÉMoligand™?Moligand™ — Aladdin's line of ligands and bioactive small molecules. Use for receptor, pathway, and binding studies needing defined small-molecule tools.10 mM in DMSO
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Avis
Avis des clients
Application Protocols
Item-specific validated protocols are not provided in the Product Data. The following are general, literature-style examples for using 5-hydroxytryptophol as an analytical standard; adjust to your laboratory’s SOPs. These are not product specifications.
LC–MS/MS standard preparation (example)
Dissolve 5-hydroxytryptophol in LC–MS grade methanol or DMSO to prepare a concentrated stock (e.g., 1–10 mg/mL). Vortex and, if necessary, sonicate briefly. Aliquot into amber vials under inert gas. Store at −80 °C. On the day of use, dilute stock into water/0.1% formic acid or ammonium formate buffer to working concentrations. Keep organic content ≥10–20% during intermediate dilutions to prevent precipitation.
Enzymatic deconjugation workflow (example)
For quantifying total 5-HTOL in biological samples, incubate matrix with β-glucuronidase/arylsulfatase in acetate or phosphate buffer (pH ~5–6) at 37 °C for 1–2 h, then quench with cold acetonitrile. Clarify by centrifugation and analyze by LC–MS/MS using an indole-selective MRM. Include matrix-matched calibration and internal standard (stable isotope-labeled 5-HTOL if available).
GC–MS derivatization (example)
Evaporate aliquots to dryness, add BSTFA (±1% TMCS) and pyridine, heat at 60–70 °C for 30 min, then inject for GC–MS. Validate derivatization completeness and stability.
Note: Optimize concentrations and instrument parameters for your platform. Follow your institutional safety and quality procedures.
Biological Roles
Literature/general information (not product specifications; for research context only)
Pathway context
5-Hydroxytryptophol (5-HTOL) is a biogenic metabolite in tryptophan/serotonin (5-hydroxytryptamine, 5-HT) metabolism. Oxidative deamination of serotonin yields 5-hydroxyindole-3-acetaldehyde (5-HIAL), which can be reduced by alcohol dehydrogenases to 5-HTOL or oxidized by aldehyde dehydrogenases to 5-hydroxyindoleacetic acid (5-HIAA). The balance between reduction and oxidation pathways influences relative levels of 5-HTOL and 5-HIAA.
Conjugation and disposition
5-HTOL is commonly conjugated to glucuronides and sulfates by UGT and SULT enzymes, increasing aqueous solubility and facilitating excretion. Deconjugation steps (e.g., β-glucuronidase/arylsulfatase treatment) are often used in analytical workflows to quantify total (free + conjugated) 5-HTOL.
Biochemical properties
The molecule contains a phenolic indole chromophore, exhibiting characteristic UV absorbance and intrinsic fluorescence, which is exploited for detection in HPLC/UPLC methods.
Research significance
5-HTOL serves as a biochemical marker in studies of serotonin turnover, enzyme kinetics of alcohol/aldehyde dehydrogenases, Phase II conjugation capacity, and time-course profiling in metabolomics. It is also used for validating extraction efficiency and matrix effects in LC–MS/MS bioanalytical methods.
Note: This section is limited to biochemical context relevant to laboratory research. No medical or clinical claims are made.
Buffer Applications
Not typically used as a buffering agent. 5-Hydroxytryptophol lacks a conjugate acid/base pair with suitable pKa spacing and solubility profile to function as a laboratory buffer.
Practical note for assays
When formulating assay buffers that contain 5-hydroxytryptophol as an analyte or substrate, select standard buffers (e.g., phosphate, HEPES, Tris) appropriate to your pH range and ensure compatibility with detection (avoid buffer components that strongly absorb/fluoresce near the indole chromophore). Adjust pH and ionic strength to maintain solubility; modest basicity (pH 8–9) can improve solubility via phenolate formation, if consistent with assay requirements.
Green Alternatives
This product is a solid small molecule analyte/building block rather than a process solvent or bulk reagent. “Green alternatives” therefore primarily concern solvent and process choices when working with 5-hydroxytryptophol.
Greener solvent choices (general guidance)
Prefer ethanol or water-rich mixtures over chlorinated solvents where feasible (consider pH adjustment to enhance aqueous solubility).
For extractions, replace dichloromethane with ethyl acetate or MTBE when compatible with your matrix.
For chromatographic purification, use alcohol/ethyl acetate/hexane systems or greener supercritical CO2 where possible.
Stabilization without excess additives
Use inert atmosphere (argon/nitrogen) and amber glass to limit oxidation and photolysis rather than adding stabilizers.
Example comparison (general)
DMSO vs Ethanol for stock solutions: DMSO offers superior solubility but has higher environmental persistence; ethanol is renewable and readily biodegradable. If assay tolerates it, ethanol or aqueous ethanol can be a greener choice, acknowledging possible solubility limits at neutral pH.
Waste minimization
Prepare concentrated master stocks and aliquot to reduce repeated dissolutions; adopt microscale workflows and 96/384-well plates for screening to cut solvent use.
Note: No process substitution of the compound itself is relevant; 5-hydroxytryptophol is typically the analyte of interest and cannot be “replaced” in targeted analyses.
Pharmaceutical Uses
No excipient or dosage-form role is specified for this item. 5-Hydroxytryptophol is primarily used in research as a reference standard, impurity marker, or metabolite surrogate in quality-control and bioanalytical method development.
Research/manufacturing relevance (general)
Reference standard: Employed to develop/validate chromatographic methods (system suitability, calibration curves, recovery) for serotonin-pathway metabolite panels in complex matrices.
Impurity/metabolite tracking: Used to profile process-related impurities or degradation products in synthesis of related indole derivatives.
Stability studies: Serves as a probe for oxidative stability and conjugation reactions (e.g., glucuronidation) in in vitro systems.
No pharmacopeial monograph or excipient status is claimed in the Product Data; consult applicable pharmacopeias and regulatory guidance if contemplating any use beyond research. For research use only.
Physical Properties
Item-specific specifications
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Measured/specification values for this specific lot are not provided in the Product Data. Consult the CoA/Spec Sheet for authoritative item-specific values (mp, water content, residual solvents, UV cutoff, metal content, etc.).
Literature/general reference values (for planning only; not item specifications)
Phase at ambient conditions: typically a solid aromatic heterocycle containing phenol and primary alcohol functionalities.
Acid–base characteristics: weakly acidic phenolic OH (pKa of phenols often ~9–10, literature for 5-hydroxyindoles is in that range); indole NH is much less acidic (pKa conjugate acid ~−2 to −3); primary alcohol largely neutral. Exact pKa values for 5-hydroxytryptophol may differ and should be verified from primary sources.
Solubility (qualitative, literature): increased aqueous solubility versus tryptophol due to phenolic OH; readily soluble in polar organic solvents (MeOH, EtOH, DMSO) and miscible with water to a moderate extent depending on pH (higher solubility in basic media via phenolate formation). Quantitative solubilities are not provided here.
Stability considerations: phenols and indoles can undergo oxidative discoloration/polymerization in air/light; protection from light and inert gas storage is recommended (see Storage & Reconstitution for item-specific guidance).
Quality and Grades
Item-specific grade (from Product Data)
Grade/Purity: Moligand™
What Moligand™ implies (general description; check CoA for lot details)
Moligand™ denotes inclusion in a small-molecule/ligand library suitable for discovery screening, SAR, chemogenomic or phenotypic assays. Such items are typically provided at high chemical purity suitable for analytical and screening workflows, but exact purity thresholds, residual solvent limits, or stabilizers are not specified here and must be confirmed on the CoA/Spec Sheet.
Purity and analytical controls (guidance)
For screening and bioanalytical applications, users commonly verify identity/purity by LC–MS and 1H NMR upon receipt. Phenolic indoles can show minor oxidative impurities; consider immediate aliquoting under inert atmosphere.
UV background: Indole chromophore exhibits strong UV absorbance (200–300 nm); for HPLC/UPLC assay design, select appropriate detection wavelengths and mobile phases to avoid baseline drift.
Stabilizers
No stabilizer is listed in the Product Data. If stabilizers or salt forms are present, they will be declared on the CoA/Spec Sheet. Absent such notation, treat as the neat free base/neutral compound.
Lot-specific documentation
If you require quantitative specifications (assay %, water content, residual solvents, heavy metals, UV cutoff, etc.): Not specified for this item; refer to CoA/Spec Sheet.
Reaction and Applications
Analytical and biochemical applications (literature/general)
Used as a reference standard and internal/external calibrant in LC–MS/GC–MS methods quantifying serotonin pathway metabolites in biological matrices (e.g., urine, plasma). Often analyzed as free compound or after conjugate cleavage (glucuronide/sulfate) with appropriate enzymatic hydrolysis.
Derivatization workflows: phenolic/alcoholic OH groups can be derivatized (e.g., silylation with BSTFA for GC–MS; acylation with dansyl/chloroformate reagents for enhanced LC–MS sensitivity). Indole moiety provides strong UV fluorescence for HPLC with fluorimetric detection.
Synthetic/organic chemistry uses (general)
Building block for preparing labeled analogs (13C/15N, deuterated standards) and prodrugs; platform for O-alkylation/acylation at the phenol and primary alcohol; N-protection of indole (e.g., Boc, SEM) allows orthogonal transformations.
Site-selective transformations on indoles (e.g., electrophilic substitution at C2 under Lewis acidic conditions) can elaborate the scaffold into diverse indole derivatives.
Practical tips
Protect sensitive sites during multistep synthesis: phenolic OH (as benzyl/acetyl ether), primary alcohol (as silyl/benzyl ether), and indole NH (Boc/Ac). Sequence protections to avoid migration or over-acylation.
For analytical standards, prepare fresh stocks under inert atmosphere, amber vials, and aliquot to avoid repeated freeze–thaw; confirm stability by periodic re-injection.
Related named reactions (context)
Mitsunobu conversion of the primary alcohol to form ethers/esters with inversion at the benzylic center (if a chiral center is generated downstream).
O-Sulfonylation/acylation for activating the alcohol (tosylates/mesylates) to enable nucleophilic substitution.
Reaction Conditions
General reaction condition guidance for common transformations of 5-hydroxytryptophol (literature-informed; not item specifications)
O-Acylation (phenol or primary alcohol)
Reagents: Acyl chlorides or anhydrides; bases such as pyridine, triethylamine, DMAP as catalyst.
Solvents: DCM, THF, MeCN, or toluene; greener alternatives include EtOAc or 2-MeTHF when compatible.
Temperature/time: 0–25 °C, 0.5–16 h. Typical isolated yields: moderate to high depending on selectivity and protection strategy.
Ether formation (Williamson)
Convert the alcohol to a tosylate/mesylate (MsCl/TsCl, Et3N, DCM, 0–25 °C), then displace with nucleophiles (e.g., halides, azide) in DMF/DMSO, 50–100 °C. Alternatively, Mitsunobu (DEAD/DIAD, PPh3) can couple the alcohol with phenols/acids at 0–25 °C.
Oxidation of primary alcohol
Dess–Martin periodinane (DMP, DCM, 0–25 °C) to aldehyde; Pinnick oxidation (NaClO2, NaH2PO4, t-BuOH/H2O) to acid. TEMPO/bleach systems provide greener alternatives.
Indole N-protection
Boc2O, DMAP, MeCN or THF, 0–25 °C; or SEM-Cl with base for SEM protection when acid stability is required.
Electrophilic substitution at C2
Vilsmeier–Haack (POCl3/DMF) for formylation; NIS/NBS for selective halogenation under mild conditions with protected NH.
Analytical derivatization for GC–MS
Silylation: BSTFA (±1% TMCS) in acetonitrile or pyridine, 60–70 °C, 15–60 min, to form TMS ethers of phenol/alcohol, enhancing volatility and detectability.
Always monitor reactions by TLC/LC–MS, maintain inert atmosphere and amber glassware to limit oxidation, and optimize conditions for your specific substrate/protection pattern.
Safety and Handling
Authoritative safety data for this specific item (GHS classification, signal word, H/P statements, pictograms) are not provided in the Product Data. Always consult the product SDS for definitive information.
General handling guidance for indole phenolic alcohols (literature/general; not item-specific requirements)
Hazards: Phenolic/indolic compounds may cause irritation to skin, eyes, and respiratory tract. Avoid inhalation of dust and contact with skin/eyes.
PPE: Wear lab coat, safety goggles, and appropriate chemically resistant gloves (e.g., nitrile). Use in a fume hood to avoid dust/aerosol exposure.
Engineering controls: Handle powders with local exhaust ventilation; minimize dust generation.
Incompatibilities: Strong oxidizers (risk of exothermic oxidation), strong bases/strong acids (can promote decomposition or undesired reactions), acylation/alkylation reagents (reactive with phenol/alcohol/indole NH).
Photolability/oxidation: Indole/phenol motifs can oxidize and darken upon exposure to air and light; keep protected from light and minimize oxygen exposure during handling.
First aid (overview; defer to SDS): In case of skin/eye contact, rinse with water for several minutes; remove contaminated clothing. If inhaled, move to fresh air. If ingested, rinse mouth; do not induce vomiting; seek medical attention.
Fire safety: Combustible organic solid; use CO2, dry chemical, or foam. Avoid water jets that may spread material.
Waste: Collect as organic hazardous waste according to institutional and local regulations.
Solvent Selection
Applicability: This section addresses dissolution and handling of 5-hydroxytryptophol as an analyte/standard/building block rather than as a reaction solvent.
Readily dissolves in polar protic and aprotic organic solvents: methanol, ethanol, isopropanol, acetonitrile, DMF, DMSO. Water solubility is moderate and pH-dependent (enhanced in basic media via phenolate formation).
Practical dissolution tips
Prepare concentrated stocks in DMSO or methanol for bioanalytical workflows; dilute into aqueous buffers last to minimize precipitation. For highly aqueous systems, adjust pH to 8–9 to increase solubility if compatible with your assay (phenolate formation), noting potential effects on reactivity and detection.
Gentle warming (≤40 °C) and sonication can accelerate dissolution; avoid prolonged heating or exposure to air/light.
Choosing among common solvents (general comparison)
DMSO: maximal solubilizing power; mixability with water; suitable for microplate screening (keep final DMSO ≤1–2%).
Methanol/Ethanol: volatile and MS-friendly; good for LC–MS standards; avoid high water fractions at neutral pH to prevent precipitation.
Acetonitrile: good for HPLC/UPLC mobile phases; may require small water content to aid dissolution, or co-solvent approach (ACN + MeOH).
Incompatibilities
Avoid strongly basic amines and acylation/alkylation reagents in stock solutions unless derivatization is intended; 5-HTOL contains multiple nucleophilic sites prone to unintended reaction.
Storage and Reconstitution
Item-specific conditions (from Product Data)
Storage: Store at −80 °C, protected from light, argon charged (inert atmosphere).
Shipping: Dry ice packs + cold packs.
Research Use: For research use only.
Practical guidance
Upon receipt: Allow the sealed container to equilibrate to room temperature in a desiccator before opening to avoid moisture condensation. Open under inert atmosphere if possible.
Aliquoting: Immediately subdivide into single-use aliquots in amber vials or PCR tubes under argon/nitrogen. This minimizes headspace oxygen and freeze–thaw cycles.
Reconstitution
Solvents: DMSO or methanol are commonly used for primary stock solutions; water or aqueous buffers can be used for working solutions with attention to pH (slightly basic conditions increase solubility but may affect stability).
Concentrations: Not specified for this item; refer to CoA/Spec Sheet and your assay requirements.
Technique: Vortex to dissolve; brief sonication may help. Avoid prolonged exposure to ambient light.
Handling stability: Keep solutions on ice and protected from light during use. Discard solutions that show discoloration or precipitate if not intended.
Freeze–thaw: Avoid repeated cycles; use aliquots. If thawing is required, thaw on ice, mix gently, and promptly return unused portions to −80 °C under inert gas.
For any lot-specific stability, purity, or reconstitution limits: Not specified for this item; refer to CoA/Spec Sheet.
Structure and Identity
Brief overview: 5-Hydroxytryptophol (5-HTOL) is a hydroxylated indole ethanol, structurally related to tryptophol and serotonin, bearing both a phenolic OH at the 5-position of the indole ring and a primary alcohol at the 3-indolylmethyl side chain.
Item-specific identifiers (from Product Data)
Product Name: 5-Hydroxytryptophol
CAS: 154-02-9
SKU: H1500726
Category: Small molecules and compound libraries (小分子和化合物库)
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Literature identity (for reference; not item specifications)
Common synonyms: 5-HTOL; 5-hydroxy-3-(2-hydroxyethyl)indole; 5-hydroxytryptophyl alcohol
Molecular formula (literature): C10H11NO2
Molecular weight (literature): ~177.20 g/mol
PubChem CID: 9061
Structural features (general description)
Core: Indole bicyclic system (benzene fused to pyrrole), with the pyrrolic nitrogen unsubstituted (indole NH).
Substituents: Phenolic hydroxyl at the 5-position of the benzene ring; 2-carbon primary alcohol (–CH2–CH2–OH) attached at the 3-position of the indole.
Functional group set: Phenol, primary benzylic alcohol, heteroaromatic NH (indole). No stereocenters.
2D structure in words: A planar indole ring bearing a para-oriented phenolic OH relative to the ring fusion (position 5) and a –CH2–CH2–OH chain from C3 of the indole.
Synthetic Utility
Functional group leverage
Phenolic OH: amenable to O-alkylation (Williamson ether synthesis), O-acylation (acyl chlorides/anhydrides), carbonate/urethanation; can be protected as benzyl ether, silyl ether (TBS/TBDPS), or carbonate.
Primary alcohol: convertible to esters/carbonates; activated as sulfonates (Ms/Ts) for subsequent SN2; oxidation to aldehyde/acid (Swern, Dess–Martin, TEMPO, or Pinnick) provides entry to 5-hydroxyindole-3-acetaldehyde/acetic acid derivatives.
Indole NH: N-protection (Boc, Cbz, SEM) enables orthogonal transformations; N-alkylation after deprotonation with strong base (NaH) affords N-substituted analogs.
Scaffold elaboration (indole chemistry)
Electrophilic substitution typically favors C3 and C2; with the side chain fixed at C3, C2-functionalization (e.g., Vilsmeier–Haack formylation, halogenation) can diversify the core. Directed metalation strategies (TMPMgCl·LiCl, LDA) may be applied with appropriate protection.
Applications
Synthesis of labeled standards (2H, 13C, 15N).
Precursor to fluorescent probes via O-acylation with reporter groups.
Conjugation to affinity tags through carbonate/carbamate linkages from the primary alcohol.
Practical considerations
Sequential protection is often essential to avoid over-acylation (phenol vs alcohol vs indole NH). Employ chemoselective reagents (e.g., CDI for carbonate formation from the primary alcohol under mild conditions) and monitor by LC–MS.
Work under inert atmosphere and subdued light to minimize indole oxidation during multi-step sequences.
Target Specificity
Not applicable. This product is a small molecule metabolite, not an antibody, enzyme, or targeted biological reagent. No antigen/epitope, clone, isotype, or species reactivity information applies.
Besoin d'aide pour choisir la qualité ?
Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.
Nous utilisons des cookies pour garantir le bon fonctionnement du site et, lorsque cela est autorisé, pour améliorer votre expérience. Vous pouvez gérer vos préférences à tout moment dans les Paramètres. Pour en savoir plus, consultez notre Politique relative aux cookies.
Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?
Me rappeler plus tard
Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.