QUALITÉ & PURETÉValidated?Validated grade — performance confirmed in defined applications before release. Use when you want documented assurance the reagent works as stated.1.0 mg/mL
Rabbit anti Human ACTG2 Antibody, Polyclonal, could be used for WB, IHC and so on. Application: WB: 1/500-1/2000 IHC: 1/100-1/300 Protein Function: Actins are highly conserved proteins that are involved in various types of cell motility and are ubiquitously expressed in all eukaryotic cells.
Spécifications
Product Name
ACTG2 Antibody - Anticorps primaire, specific to ACTG2, Rabbit IgG
Store at -20°C,Avoid repeated freezing and thawing
Expédié en
Ice chest + Ice pads
Stabilité et stockage
Store at -20℃ long term (12 months). Upon receipt, it is recommended to aliquot. Avoid freeze/thaw cycle.
Images
ACTG2 Antibody (Ab087251) - Western Blot All lanes: ACTG2 Antibody (Ab087251) at 1/1000 dilution Samples: Lysates at 20 µg per lane Secondary: Goat Anti-Rabbit IgG H&L (HRP) (Ab170144) at 1/20000 dilution Predicted band size: 42 kDa Observed band size: 43 kDa Exposure time: 63.5 s
ACTG2 Antibody (Ab087251) - Western Blot All lanes: ACTG2 Antibody (Ab087251) at 1/2000 dilution Samples: Lysates at 10 µg per lane Secondary: Goat Anti-Rabbit IgG H&L (HRP) (Ab170144) at 1/20000 dilution Predicted band size: 42 kDa Observed band size: 43 kDa Exposure time: 7.1 s
ACTG2 Antibody (Ab087251) - IHC Immunohistochemistry analysis of paraffin-embedded human skeletal muscle tissue, using ACTG2 Antibody (Ab087251). The picture on the right is blocked with the synthesized peptide.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Avis
Avis des clients
Application Protocols
Tested applications, recommended dilutions, incubation conditions, retrieval/permeabilization details, and positive control suggestions are not specified for this item in the provided Product Data.
Guidance
Please consult the product’s CoA/Spec Sheet for authoritative, item-specific protocols and any manufacturer-validated applications for SKU Ab087251.
Note
Adhere to best practices for antibody titration and control selection within your laboratory’s established SOPs until item-specific recommendations are reviewed.
Biological Roles
General knowledge about the target (ACTG2)
Gene/protein: ACTG2 encodes actin, gamma 2 (enteric/smooth muscle), a cytoplasmic actin isoform that polymerizes into microfilaments forming part of the contractile apparatus in smooth muscle cells.
Cellular functions: Provides structural support and participates in force generation via interaction with myosin in smooth muscle. Actin dynamics (G-actin ↔ F-actin) regulate cell shape, adhesion, and motility. ACTG2 isoform-specific expression contributes to tissue-specific mechanical properties.
Expression pattern: Predominant in visceral and vascular smooth muscle. Also present in certain myofibroblast populations under remodeling conditions.
Interactions: Binds actin-associated proteins (e.g., tropomyosin, cofilin, profilin, α-actinin) and is regulated by Rho/ROCK and other signaling pathways that affect filament assembly and contractility.
Structural features: Highly conserved actin fold with ATP-binding site; polymerization into right-handed two-stranded filaments. Isoform differences from ACTB (β-actin) and ACTA2 (α-smooth muscle actin) can be discriminated by sequence-specific epitopes.
Research relevance: Antibodies to ACTG2 are used to delineate smooth muscle architecture, study cytoskeletal remodeling, and serve as lineage or compartment markers in tissue studies.
Note for this SKU
Species reactivity, epitope, and application validation specific to Ab087251 are not specified in the Product Data. Consult the CoA/Spec Sheet for the precise scope of biological recognition supported by this product.
Buffer Applications
Antibody reagents are used within biological buffer systems rather than serving as buffers themselves.
General buffer guidance for immunoassays (contextual; not item-specific protocols)
Working buffers: PBS or TBS at pH ~7.2–7.6 with 0.05% Tween-20 for wash steps can reduce nonspecific binding. Add 1–5% BSA or serum as a blocking agent where appropriate.
Sample permeabilization (for intracellular ACTG2): Use mild detergents (e.g., 0.1–0.5% Triton X-100 or saponin) as compatible with your protocol; optimize to preserve cytoskeletal structures.
Antigen retrieval (IHC): Heat-induced epitope retrieval in citrate or Tris-EDTA buffers can unmask epitopes depending on fixation; optimization is target- and clone-dependent.
Storage buffers: If preparing aliquots, use sterile, filtered buffers. Inclusion of stabilizers (e.g., sugars, carrier protein) may improve freeze–thaw resilience; presence/absence for this SKU is not specified.
Note
Application-specific buffer recipes and recommended dilutions for Ab087251 are not specified in the Product Data. Refer to the CoA/Spec Sheet for product-tailored guidance.
Green Alternatives
Context
As a protein reagent, an antibody does not have a direct solvent replacement “green alternative” in the way organic solvents or bulk chemicals do. Sustainability considerations instead focus on formulation, handling, and waste minimization.
Greener practice considerations (general)
Minimize waste: Aliquot to reduce freeze–thaw cycles and product loss; plan experiments to avoid expired/unused material.
Buffer selection: Use phosphate or Tris buffers prepared from concentrates to reduce packaging. Avoid hazardous preservatives where feasible and permitted by your biosafety policies (preservatives, if any, are not specified for this item).
Energy use: Store at −20°C as specified; avoid unnecessarily colder storage. Consolidate freezer space and maintain efficient door-opening discipline to limit energy consumption.
Packaging: Recycle secondary packaging materials (ice packs, cardboard) according to local guidelines.
Comparison (conceptual)
Traditional practice: Multiple small shipments per project → higher transport impact.
Greener alternative: Consolidate orders and use longer-lived aliquots under best-practice storage to reduce shipping frequency.
Note
No changes to recommended storage or handling should compromise reagent integrity. Always prioritize data quality and product stability as specified in the product documentation.
Pharmaceutical Uses
This product is supplied for research use only (per Product Data) and is not intended for human or veterinary use, diagnostic procedures, or therapeutic applications.
General context (non-clinical)
Antibody reagents such as this are commonly used in pharmaceutical research and development labs for target verification, biomarker discovery, assay development, and QC of cell lines or process intermediates.
Formulation/excipient status: No pharmacopeial status or excipient role is claimed or implied for this SKU. Composition details (buffers, preservatives, stabilizers) are not specified for this item; consult the CoA/Spec Sheet if formulation constraints are relevant to your process development.
Regulatory note
Use within GLP/GMP environments requires internal qualification of the reagent and documentation such as CoA, SDS, and stability records. Lot-to-lot comparability assessments are recommended when integrating into regulated workflows.
Summary
Research-use laboratory reagent to support non-clinical studies. No medical, diagnostic, or therapeutic claims are made or should be inferred.
Physical Properties
Item-specific physical specifications
Molecular formula, molecular weight, extinction coefficient, concentration, buffer composition: Not specified for this item; refer to CoA/Spec Sheet.
General/literature properties for IgG-class antibodies (for orientation only; not item-specific specs)
Apparent molecular mass: ~150 kDa for IgG (heavy chain ~50 kDa, light chain ~25 kDa; reducing SDS-PAGE shows ~50/25 kDa bands). Fragment masses: Fab ~50 kDa, F(ab′)2 ~110 kDa, Fc ~50 kDa.
Isoelectric point (pI): commonly ~6–9 depending on isotype and sequence; formulation pH typically ~7–8 for stability.
Solubility: Highly soluble in aqueous buffers (PBS/TBS). Precipitates outside optimal pH/ionic strength or upon repeated freeze–thaw.
Stability: Enhanced by neutral pH, moderate ionic strength (e.g., 150 mM NaCl), protein stabilizers (e.g., carrier proteins, sugars) and low, constant temperature.
Aggregation propensity: Increased by thermal stress, interfacial stress (vigorous mixing), freeze–thaw cycling, or high concentration without stabilizers.
Handling implications
Avoid foaming and strong vortexing; prefer gentle mixing.
Filtered (0.22 µm) buffers help minimize particulate-induced aggregation.
Reminder
None of the above values are item-specific specifications for Ab087251; consult the product CoA/Spec Sheet for exact composition and properties.
Quality and Grades
Item-specific quality note
Grade/Purity: Validated (per Product Data).
What “Validated” typically implies (general guidance; check this product’s CoA for specifics)
Validated indicates the antibody has undergone internal quality control to confirm identity and binding to ACTG2 by one or more assays (e.g., ELISA against immunogen, signal detection in a relevant lysate, or specificity checks).
Batch-to-batch QC may include protein concentration determination, purity assessment by SDS-PAGE, and confirmation of absence of microbial contamination/bioburden.
Practical implications
Reproducibility: Validation reduces risk of non-specific signals in routine workflows when used under recommended conditions.
Documentation: Review the Certificate of Analysis for the exact validation assays, lot acceptance criteria, recommended starting dilutions, and any species or application claims specific to this SKU.
Stabilizers/preservatives: Not specified for this item; refer to CoA/Spec Sheet. The presence or absence of carriers (e.g., BSA) can affect certain downstream applications (e.g., conjugations, mass spectrometry prep).
Fit-for-purpose considerations
If conducting quantitative analyses (e.g., absolute protein quantification), seek calibration data and linearity ranges from the datasheet.
For immunoassays sensitive to cross-reactivity, request epitope mapping or peptide-blocking data when available.
Traceability
Retain lot numbers and CoA documents in your records to ensure traceable, reproducible research outcomes.
Reaction and Applications
This product is an antibody reagent used for immunodetection rather than a reactant in chemical synthesis.
General research applications for ACTG2-targeting antibodies (context; not a claim for this specific lot without datasheet confirmation)
Western blotting (WB): Detection of ACTG2 in smooth muscle–rich lysates; peptide competition controls can help assess specificity.
Immunohistochemistry (IHC) and immunofluorescence (IF): Visualization of smooth muscle cytoskeleton in tissue sections or cultured cells; fixation and antigen retrieval conditions can strongly influence filamentous actin epitope exposure.
Immunoprecipitation (IP): Enrichment of ACTG2-containing complexes to study cytoskeletal interactions; consider non-denaturing lysis buffers to preserve actin-binding partners.
Flow cytometry (FC): Less common for cytoskeletal targets due to intracellular localization; requires cell permeabilization.
Practical tips (general)
Titration: Optimize antibody dilution for each application and sample type to maximize S/N.
Controls: Include isotype controls, secondary-only controls, and—if available—ACTG2 knockout/knockdown or peptide-blocked controls.
Sample prep: For cytoskeletal proteins, extraction conditions (e.g., presence of phalloidin, fixation method) can alter detectability.
Note
Manufacturer-tested applications for SKU Ab087251 are not specified in the Product Data. Refer to the CoA/Spec Sheet for the validated application list and recommended conditions.
Reaction Conditions
Not applicable in the context of chemical reaction optimization. This antibody is used in immunoassays and affinity-based techniques rather than stoichiometric or catalytic chemical reactions.
General experimental conditions for antibody use (context only; not item-specific)
Temperature: Keep on ice or at 2–8°C during setup; incubations commonly at room temperature or 4°C depending on assay.
Time: Incubation times vary by application (e.g., 1–2 h at RT or overnight at 4°C), but specific recommendations for SKU Ab087251 are not provided in the Product Data.
Buffers: Near-neutral aqueous buffers (PBS/TBS) with appropriate blockers/detergents tailored to the assay.
Note
For any validated application-specific conditions, consult the CoA/Spec Sheet accompanying Ab087251.
Safety and Handling
Authoritative safety information
GHS classification, signal word, hazard statements (H-phrases), and pictograms: Not specified for this item; refer to the SDS for authoritative safety data.
General laboratory safety for antibody reagents
PPE: Lab coat, safety glasses, and appropriate chemical-resistant gloves. Avoid inhalation of aerosols and contact with skin/eyes. Wash hands after handling.
Good practice: Work on ice or at 2–8°C during bench handling to preserve protein integrity. Use clean, low-protein-binding plastics to limit adsorption losses.
Avoid contamination: Use sterile techniques if downstream cell-based assays are planned. Aliquot upon first thaw to prevent contamination from repeated access.
Incompatibilities and stability risks (general)
Temperature excursions: Prolonged exposure to >4°C can accelerate degradation and aggregation.
Freeze–thaw: Repeated cycles promote aggregation and loss of activity—explicitly avoid per Product Data.
pH extremes/denaturants: Strong acids/bases, chaotropes, and organic solvents may denature proteins.
Surfaces/agitation: Extensive agitation or exposure to hydrophobic surfaces increases interfacial denaturation.
First-aid overview (general)
Skin/eye contact: Rinse with water. Remove contaminated clothing. Seek medical advice if irritation persists.
Ingestion/inhalation: Move to fresh air; rinse mouth; seek medical attention according to institutional policy.
Waste disposal
Dispose of protein solutions and consumables in accordance with institutional biosafety and local regulations.
Note
For research use only (per Product Data). Consult the SDS and CoA for any preservative- or buffer-specific hazards if applicable.
Solvent Selection
Not typically applicable. Antibodies are supplied in aqueous buffers and are intended for use in compatible biological buffers rather than organic solvents.
General buffer compatibility (guidance)
Preferred media: Isotonic, near-neutral aqueous buffers (e.g., PBS, TBS) with optional mild detergents (e.g., 0.05% Tween-20) for wash steps in immunoassays.
Avoid: High percentages of organic solvents, strong acids/bases, or chaotropes that denature proteins.
Additives: Sugars (e.g., sucrose, trehalose) and carrier proteins can improve stability during storage and freeze–thaw, but their presence is not specified for this item.
Selection tip
Choose buffer systems aligned with your downstream application (WB, IHC, IF, IP), ensuring ionic strength and pH compatibility with both the antibody and sample. Consult the product’s CoA/Spec Sheet for any specific buffer constraints.
Storage and Reconstitution
Item-specific instructions (from Product Data)
Storage: Store at −20°C.
Freeze–thaw: Avoid repeated freezing and thawing.
Shipping: Shipped in an ice chest with ice pads.
Additional details
Reconstitution buffer, concentration, stabilizers/preservatives, and aliquoting instructions: Not specified for this item; refer to CoA/Spec Sheet.
General best practices (context)
Upon receipt: Verify integrity of cold chain. If product is lyophilized, briefly centrifuge vial before opening; reconstitute with sterile, buffered solution per datasheet. If liquid, mix gently by inversion.
Aliquoting: Prepare single-use aliquots in low-protein-binding tubes to minimize freeze–thaw cycles. Label with lot number and date.
Short-term handling: Keep on ice during use; return promptly to −20°C after aliquoting.
Long-term considerations: For multi-month storage, some laboratories prefer −80°C for unconjugated antibodies; confirm compatibility with the product documentation. Avoid frost-free freezers and minimize freeze–thaw exposure.
Disclaimer
Follow the product’s CoA/Spec Sheet for any specific reconstitution volumes, buffer compositions, or storage exceptions applicable to Ab087251.
Structure and Identity
Item-specific facts (from Product Data)
SKU: Ab087251
Product name: ACTG2 Antibody
Grade/Purity: Validated
Storage: Store at −20°C; avoid repeated freezing and thawing
Shipment: Ice chest + ice pads
CAS, CID, InChIKey, SMILES: Not specified for this item; refer to CoA/Spec Sheet.
General antibody structural features (literature)
Molecular class: Immunoglobulin (antibody) protein reagent. Typical research antibodies are IgG (~150 kDa) composed of two heavy and two light chains joined by disulfide bonds.
Architecture: Y-shaped heterotetramer with variable domains (VH/VL) conferring antigen binding and constant domains (CH/CL) mediating Fc interactions. Contains intra- and inter-chain disulfides, N-glycan(s) on Fc (for IgG).
Binding: Two identical antigen-binding sites (paratopes) recognizing an epitope on the target protein.
Cellular localization of target: cytoplasmic cytoskeleton, smooth muscle contractile apparatus.
2D description in words (general)
Antibodies are polypeptide macromolecules; they do not have a small-molecule 2D skeletal formula. The molecule consists of β-sandwich immunoglobulin domains arranged into Fab arms (antigen binding) and an Fc stem (effector). Variable loops (CDRs) in the Fab tips determine specificity to ACTG2 epitopes.
Notes
Exact clonality (monoclonal/polyclonal), host species, isotype, and epitope mapping are not specified for this item; refer to the CoA/Spec Sheet.
Synthetic Utility
Not applicable. As an antibody reagent, this product is not used as a synthetic building block or reagent in organic synthesis.
Context (general)
Antibodies function as affinity reagents for detection, capture, and quantitation of target proteins in biological samples, rather than participating in chemical transformations. For synthesis-related needs (e.g., small-molecule probes for actin), consider dedicated chemical reagents designed for that purpose.
Target Specificity
Item-specific details required for this section are not provided in the Product Data.
Not specified for this item; refer to CoA/Spec Sheet for:
Antigen: Full name/symbol (ACTG2) and immunogen description (peptide vs. recombinant protein region)
Species reactivity: Human/mouse/rat/other
Clonality and host: Monoclonal or polyclonal; host species (e.g., rabbit, mouse)
Isotype/subclass: For monoclonals (e.g., IgG1, IgG2a) or predominant IgG class for polyclonals
Conjugation state: Unconjugated vs. labeled (HRP, biotin, fluorophore)
Epitope/competition data: If available
General note
Cross-reactivity among actin isoforms (ACTB, ACTA2) can occur depending on epitope selection; item-specific validation data are necessary to confirm ACTG2 selectivity.
Besoin d'aide pour choisir la qualité ?
Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.
Nous utilisons des cookies pour garantir le bon fonctionnement du site et, lorsque cela est autorisé, pour améliorer votre expérience. Vous pouvez gérer vos préférences à tout moment dans les Paramètres. Pour en savoir plus, consultez notre Politique relative aux cookies.
Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?
Me rappeler plus tard
Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.