QUALITÉ & PURETÉBioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.2 mg/mL
Protease inhibitors can bind to specific groups in the active centers of protease molecules, reducing or eliminating enzyme activity without denaturing the proteins. This effectively inhibits protein degradation and maintains native protein-protein interactions. Common protease inhibitors include EDTA, E-64, NaVO₃, Bestatin, Leupeptin, Pepstatin A, Aprotinin, etc.
Product Description
The Aprotinin Solution (2 mg/mL) is primarily composed of aprotinin. It is EDTA-free and provided as a concentrated solution. Its working concentration ranges from 1 to 10 μg/mL, with a commonly used concentration of 3 to 5 μg/mL. It is suitable for protein extraction from mammalian tissues and cells, facilitating efficient obtainment of target proteins. The extracted products can be used in subsequent experiments such as Western Blot, Co-Immunoprecipitation (Co-IP), etc.
This reagent is for research use only. Not for use in diagnostic procedures or other purposes.
Procedure (For Reference Only)
Briefly centrifuge the tube before opening to spin down any liquid adhering to the walls or cap.
Add this product to the required volume of Lysis Buffer and dilute to the desired target working concentration (1–10 μg/mL, 3–5 μg/mL recommended) before use.
Notes
This product is mildly irritating. Handle with care and avoid repeated freezing and thawing.
For your safety and health, please wear laboratory appropriate attire and disposable gloves while handling reagents.
Use the reagent as soon as possible after opening to ensure optimal performance.
Spécifications
Spécifications et pureté
BioReagent,2 mg/mL
Stabilité et stockage
Store at -20℃ long term (18 months). Avoid freeze/thaw cycle. Store in the dark.
Conditions de stockage de stockage
Protected from light,Store at -20°C
Expédié en
Ice chest + Ice pads
Ce produit nécessite l'expédition en chaîne froide. Les services terrestres et autres services économiques ne sont pas disponibles.
Grade
BioReagent
Product Line
Produits biologiques
Données avancées
Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Find and download the COA for your product by matching the lot number on the packaging.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Avis
Avis des clients
Application Protocols
Only protocols validated for this specific product should be presented here; none are provided in the product data.
Tested applications and recommended dilutions: Not specified for this item; refer to CoA/Spec Sheet.
Positive controls and assay conditions: Not specified for this item; refer to CoA/Spec Sheet.
For general, literature-based guidance on use, see the Reaction & Applications, Buffer Applications, and Reaction Conditions tabs.
Biological Roles
Literature/general context for aprotinin (BPTI):
Functional class:
Kunitz-type serine protease inhibitor that binds tightly to the active sites of trypsin-like proteases (e.g., trypsin, chymotrypsin to a lesser extent, plasmin, kallikrein), blocking peptide bond hydrolysis.
Mechanistic features:
The inhibitory loop with a P1 Lys/Arg side chain occupies the S1 pocket of target proteases, forming a long-lived, reversible complex that mimics a canonical substrate transition state without turnover.
Multiple disulfide bonds confer exceptional conformational stability and resistance to proteolysis.
Biochemical relevance:
Serves as a reference inhibitor in enzymology, enabling dissection of serine protease contributions to complex proteolytic cascades.
Useful in maintaining integrity of proteins during extraction and purification by preventing autodigestion and protease-mediated degradation.
Interactions and selectivity (general):
High-affinity interactions with trypsin-like proteases; Ki values in the sub-nanomolar to low-nanomolar range for many targets (values vary with buffer, temperature, and target protease isoform).
Note: The descriptions above summarize literature properties of aprotinin as a class and are not item-specific specifications. For lot-specific activity, origin, and composition, refer to the CoA/Spec Sheet (not specified here).
Buffer Applications
Aprotinin is not a buffer component per se but is commonly included in buffers to control proteolysis (literature/general guidance):
Typical use cases:
Cell/tissue lysis buffers (e.g., RIPA, NP-40, mild Triton X-100 buffers) to protect proteins during extraction.
Chromatography and storage buffers for labile proteins.
Working ranges (literature examples; adjust based on CoA activity and sample load):
0.3–10 μg/mL or 10–200 KIU/mL final concentration are common ranges reported; optimal dosing depends on protease burden and matrix.
Practical tips:
Add fresh, immediately before use; keep solutions on ice.
Combine with complementary inhibitors (e.g., leupeptin, pepstatin A, E-64, EDTA) to cover serine, cysteine, aspartic, and metalloproteases as needed.
Verify compatibility with downstream assays (e.g., remove or dilute prior to intentional trypsin digestion in proteomics).
Item-specific concentration, buffer composition, and any preservatives: Not specified for this item; refer to CoA/Spec Sheet.
Green Alternatives
Environmental and sustainability considerations for protease inhibition reagents (literature/general):
Source and sustainability:
Traditional aprotinin is bovine-derived. A greener alternative is recombinant aprotinin produced in microbial systems, reducing reliance on animal tissues and improving batch consistency.
Plant-derived inhibitors (e.g., soybean trypsin inhibitor, SBTI) are renewable and can substitute in some applications, though potency/specificity profiles differ.
Formulation and waste:
Aqueous, preservative-free formulations minimize hazardous waste; verify whether preservatives are present (Not specified for this item; refer to CoA/Spec Sheet.).
Use minimal effective concentrations and prepare small aliquots to reduce discard volumes.
Comparative considerations (general):
Recombinant aprotinin: similar inhibitory spectrum to bovine aprotinin; benefits include animal-free supply chain and potentially lower endotoxin.
SBTI: effective against trypsin-like proteases but with different kinetics and potential additional activities; may be suitable for routine lysis buffers where exact Ki is less critical.
Operational “green” practices:
Keep work cold to reduce required inhibitor loading.
Validate narrower inhibitor panels tailored to your sample’s protease profile to minimize chemical use.
Item-specific origin (animal vs recombinant) and formulation: Not specified for this item; refer to CoA/Spec Sheet.
Pharmaceutical Uses
This product is sold strictly for research use only (item-specific note). No clinical or therapeutic applications are claimed or supported.
In bioprocess development and manufacturing research, aprotinin is sometimes employed to mitigate proteolysis in process intermediates (e.g., harvested cell culture fluid) to improve recovery of target proteins during method development.
As a tool reagent, it can help define protease control strategies in upstream/downstream process buffers prior to scale-up, subject to regulatory and quality system requirements.
Regulatory/compendial status for this specific item: Not specified for this item; refer to CoA/Spec Sheet.
If use in regulated environments is contemplated, confirm origin (animal vs recombinant), impurity profile (e.g., endotoxin), and activity assay methods with the supplier. These details are Not specified for this item and must be verified on the CoA/Spec Sheet.
Physical Properties
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet. (Literature: aprotinin is ~6.5 kDa.)
Solubility: Item-specific solubility not specified. Literature: readily soluble in aqueous buffers; insoluble/denatured by many organic solvents and strong chaotropes.
pI (isoelectric point): Literature (general): aprotinin is basic, typical pI ~10–11; actual value may vary by source and formulation.
Extinction coefficient: Not specified for this item; refer to CoA/Spec Sheet.
Density, MP/BP, refractive index, logP: Not applicable/meaningful for peptide solutions; Not specified for this item; refer to CoA/Spec Sheet.
Notes for users (literature/general):
Aprotinin maintains activity across a broad pH range but is commonly used near neutral pH (pH 6.5–8.5) in protein biochemistry buffers.
Activity can be reduced by prolonged exposure to high temperature or extreme pH; keep cold and avoid repeated freeze–thaw to preserve potency.
If concentration is provided on the CoA, calculate working dilutions gravimetrically or using activity units (e.g., KIU) when applicable.
Quality and Grades
Grade: BioReagent (item-specific)
BioReagent grade indicates suitability for common biochemical and molecular biology workflows (e.g., enzyme inhibition in cell/tissue lysates, protein purification), emphasizing functional utility and low levels of interfering contaminants for research use. It is not a clinical/diagnostic grade.
What this implies (general guidance):
Manufactured/handled to minimize bioburden and particulate contamination compatible with research assays.
Typical expectations include reliable inhibitory activity in standard protocols, clarity of solution, and consistent lot-to-lot performance. Specific activity units, concentration, or preservative details are Not specified for this item; refer to CoA/Spec Sheet.
Lot documentation:
For activity verification, buffer composition, and concentration, consult the lot-specific Certificate of Analysis (CoA). These parameters can affect dosing in your assay and are not specified here.
Stabilizers/preservatives:
Not specified for this item; refer to CoA/Spec Sheet. Presence or absence of agents like salts, glycerol, or antimicrobial preservatives may influence storage temperature, freeze–thaw tolerance, and compatibility with downstream mass spectrometry or cell-based assays.
Reaction and Applications
While not a reagent for synthetic organic reactions, Aprotinin Solution is widely used in biochemical workflows to control proteolysis (literature/general guidance):
Protein extraction and purification:
Add to lysis buffers to inhibit trypsin-like serine proteases released from cells/tissues, preserving native proteins and post-translational modifications.
Include during chromatographic purification of labile proteins susceptible to proteolysis (e.g., secreted enzymes, receptors).
Enzymology and assay development:
Use as a selective inhibitor control to verify serine protease involvement in an activity assay.
Apply in zymography or fluorogenic substrate assays to define inhibitor sensitivity profiles.
Sample preparation for proteomics (careful use):
During pre-digestion handling, aprotinin can suppress endogenous proteases. Remove or dilute prior to intentional trypsin digestion to avoid interference.
Cell biology workflows:
Supplement culture supernatant processing or virus-like particle preparation to reduce proteolytic degradation during harvest and clarification.
Practical tips:
Dose by mass (μg/mL) or activity units (e.g., KIU/mL) depending on provided CoA data (not specified here).
Combine with a broad-spectrum cocktail (e.g., leupeptin, pepstatin A, E-64, EDTA) to cover other protease classes when needed.
Maintain cold conditions and add immediately before use to offset ongoing protease release.
Reaction Conditions
Operational guidance for biochemical use (literature/general; not item-specific specifications):
Temperature: Keep samples on ice or at 4°C during extraction and handling. Incubations for inhibition are typically at the assay temperature (e.g., 25–37°C) with adequate pre-equilibration.
pH: Use near-neutral buffers (pH 6.5–8.5). Aprotinin retains activity across a broad pH range but extremes may reduce potency or stability over time.
Time: Inhibition is rapid upon mixing; allow a few minutes for equilibration before initiating assays.
Concentration: Common working levels are 0.3–10 μg/mL or 10–200 KIU/mL, adjusted to protease load and sample matrix. Optimize empirically.
Additives: Compatible with many non-ionic detergents at modest concentrations (e.g., Triton X-100, Tween-20). High concentrations of chaotropes or ionic detergents (SDS) can reduce activity.
Interferences: Intentional trypsin/chymotrypsin digestion will be inhibited; remove, dilute, or inactivate aprotinin prior to proteomics workflows.
Assay setup tips:
Prepare fresh working aliquots from the stock solution (concentration not specified for this item; refer to CoA/Spec Sheet.).
Mix gently; avoid foaming. Use low-binding tubes to limit adsorption losses, especially at low nanomolar concentrations.
Validate efficacy by monitoring sentinel protease substrates or by activity gel assays.
Item-specific buffer composition, activity units, and exact concentration: Not specified for this item; refer to CoA/Spec Sheet.
Safety and Handling
GHS classification, signal word, pictograms, hazard statements: Not specified for this item; refer to the SDS for authoritative safety information.
General laboratory precautions (literature/practice-based):
Treat protein reagents as potential allergens; avoid inhalation of aerosols and contact with skin/eyes. Use in a chemical fume hood or biosafety cabinet if aerosol generation is possible.
Wear appropriate PPE: lab coat, gloves (nitrile), and safety glasses. Wash hands thoroughly after handling.
Avoid contact with oxidizing agents, strong acids/bases that may denature proteins, and proteases that could inactivate the inhibitor prior to use.
First aid (general guidance; defer to SDS):
Skin/eye contact: Rinse with plenty of water for several minutes. Seek medical attention if irritation persists.
Inhalation: Move to fresh air; seek medical advice if symptoms occur.
Ingestion: Rinse mouth; seek medical attention.
Handling notes for activity preservation (good laboratory practice):
Keep solution on ice during setup; minimize time at room temperature.
Avoid vigorous vortexing/foaming that may denature proteins.
Use clean, low-protein-binding plasticware to limit adsorption.
Waste disposal: Dispose of aqueous protein solutions according to institutional and local regulations. If the formulation contains preservatives (e.g., azide), follow specific disposal guidance on the SDS (not specified for this item).
Solvent Selection
This product is a peptide solution, not a conventional solvent. Selection focuses on compatible aqueous media for dilution and use.
Polarity/miscibility (literature/general):
Aprotinin is water-soluble; use neutral, buffered aqueous systems (e.g., Tris, HEPES, PBS) for working dilutions.
Avoid or minimize organic cosolvents (acetonitrile, methanol, DMSO) that can denature proteins or modulate binding to target proteases. Low percentages (<5%) may be tolerated in some assays but can alter activity—verify empirically.
Buffer compatibility (general):
Typical buffers: PBS, TBS, HEPES, or Tris at pH 7–8. Include salts matching your downstream application; avoid chelators or detergents only if assay constraints require.
High concentrations of chaotropes (urea, guanidinium) or ionic detergents (SDS) can disrupt structure and reduce inhibitory activity.
When to choose this reagent vs alternatives:
Choose aprotinin when specific inhibition of trypsin-like serine proteases (trypsin, plasmin, kallikrein) is desired in protein extraction or purification.
Consider alternative inhibitors (e.g., soybean trypsin inhibitor, small-molecule serine protease inhibitors) if organic-solvent-rich environments are unavoidable or if different protease classes must be targeted.
Item-specific diluent composition and concentration: Not specified for this item; refer to CoA/Spec Sheet.
Storage and Reconstitution
Storage conditions (item-specific):
Store at −20°C, protected from light.
Shipped cold: ice chest + ice pads (item-specific). Inspect upon receipt; if thawing occurred, promptly refreeze after mixing gently unless the CoA indicates an alternative storage recommendation.
Stability notes (general best practice for peptide solutions):
Avoid repeated freeze–thaw cycles; aliquot into single-use portions upon first thaw.
Thaw on ice and mix gently by inversion; avoid vigorous vortexing to limit foaming/denaturation.
Keep on ice during setup; return unused stock to −20°C promptly. Short-term storage at 2–8°C may be acceptable for working solutions prepared the same day.
Reconstitution: Not applicable; product is supplied as a solution. For dilutions, use sterile, cold, protease-free buffers (e.g., PBS, HEPES, or Tris), matching your downstream assay. Exact stock concentration and buffer composition are Not specified for this item; refer to CoA/Spec Sheet.
Light protection:
Store in amber vials or foil-wrap to limit light exposure, as specified.
Compatibility cautions (general):
Remove or dilute prior to procedures requiring serine protease activity (e.g., trypsin digestion). Confirm preservative content on the CoA to ensure downstream assay compatibility (not specified for this item).
Structure and Identity
Aprotinin Solution is a proteinaceous protease inhibitor supplied in solution for biochemical research use.
Item-specific identifiers:
CAS: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not applicable to proteins/peptides; Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
Literature/typical identity (for context; not item-specific specifications):
Aprotinin is a Kunitz-type serine protease inhibitor (bovine pancreatic trypsin inhibitor, BPTI), a single-chain basic polypeptide of ~58 amino acids with three intramolecular disulfide bonds.
Typical average Mr ≈ 6.5 kDa (literature), highly cationic at neutral pH.
Structural features (general description, literature):
Compact, disulfide-rich fold (three Cys–Cys bridges) that stabilizes a canonical protease-inhibitory loop.
Presents a P1 Lys/Arg residue within an exposed loop that binds serine protease active sites (trypsin-like specificity pocket).
No defined small-molecule “2D structure”; as a peptide, it adopts a constrained 3D fold in solution.
Form supplied:
Solution (concentration, buffer composition, and excipients/preservatives: Not specified for this item; refer to CoA/Spec Sheet.).
Synthetic Utility
Not typically applicable. Aprotinin Solution is a biological inhibitor used to modulate enzyme activity in biochemical systems rather than a building block or reagent for chemical synthesis.
For researchers in chemical biology (literature/general):
Aprotinin can serve as a selective probe to confirm serine protease involvement in complex reaction mixtures or cell-free systems.
It may be used to stabilize protein substrates during chemoenzymatic transformations by suppressing competing proteolysis.
No named organic reactions or classical synthetic transformations rely on aprotinin directly. For synthetic chemistry needs, refer instead to sections on Reaction & Applications (biochemical workflows) and Buffer Applications.
Target Specificity
Only product-data-derived details may be listed here. Item-specific target information is not provided for this SKU.
Target(s): Not specified for this item; refer to CoA/Spec Sheet.
Species/reactivity, epitope/sequence details, activity units: Not specified for this item; refer to CoA/Spec Sheet.
General note: Literature describes aprotinin as a Kunitz-type inhibitor of trypsin-like serine proteases; however, such details are not item-specific and are therefore not asserted here.
Foire aux questions
What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at ?20 °C, protected from light. The material is light-sensitive — keep it in its original opaque or amber container.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Besoin d'aide pour choisir la qualité ?
Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.
Nous utilisons des cookies pour garantir le bon fonctionnement du site et, lorsque cela est autorisé, pour améliorer votre expérience. Vous pouvez gérer vos préférences à tout moment dans les Paramètres. Pour en savoir plus, consultez notre Politique relative aux cookies.
Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?
Me rappeler plus tard
Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.