QUALITÉ & PURETÉBioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
This product is obtained from hydrolyzed meat. It is soluble in water, yielding a clear and transparent solution with no phosphate precipitation, and is used for the preparation of microbial culture media.
Composition:
Total nitrogen: ≥ 8.0%
Amino nitrogen: ≥ 2.0%
Ash: ≤ 15.0%
Moisture: ≤ 7.0%
Spécifications
Spécifications et pureté
BioReagent
Conditions de stockage de stockage
Room temperature
Expédié en
Normal
Grade
BioReagent
Product Line
Produits biologiques
Données avancées
Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculateurs de solution
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Avis
Avis des clients
Application Protocols
Item-specific, validated protocols are not provided. The following are literature/general-use examples for microbiological media preparation that include bacteriological peptone or analogous peptones. Adjust to your SOPs and organism requirements.
Nutrient Broth (typical):
Peptone 5 g/L; Beef extract 3 g/L; NaCl 5 g/L; Adjust pH ~7.0; Autoclave 121 °C for 15–20 min.
LB-type broths utilize tryptone (a casein peptone) plus yeast extract and NaCl; in some applications, bacteriological peptone can be screened as an alternative nitrogen source with performance verification.
Sterile filtration option:
For heat-labile supplements, prepare peptone base, autoclave, cool to ~45–55 °C (for agar) or room temperature (broth), then add sterile-filtered components aseptically.
Aseptic technique:
Work in a biosafety cabinet when necessary, flame-sterilize tools, and minimize container open time.
These example formulations are general references. Verify composition, pH, and sterilization conditions per your quality system. No manufacturer-tested applications are specified for this item.
Biological Roles
This section addresses the functional role of peptone in biological systems and culture media (literature/general); it is not a clinical claim.
Nutrient provisioning:
Nitrogen source: Supplies readily assimilable amino acids and small peptides, supporting protein synthesis and growth of heterotrophic microbes.
Carbon and energy: Provides modest carbon contribution via amino acid catabolism; typically supplemented with a primary carbon source (e.g., glucose, glycerol) in defined formulations.
Growth factors: May contain small amounts of vitamins, minerals, and trace elements depending on source, contributing to recovery of stressed or fastidious organisms.
Impact on physiology:
Peptide transport: Many bacteria preferentially import di-/tripeptides; peptone leverages these transport systems, reducing biosynthetic burdens and shortening lag phase.
Buffering capacity: Peptone offers limited buffering via amino/carboxylate groups; final media pH is dominated by dedicated buffers/salts.
Metabolic profiling: Complex nitrogen can influence metabolite spectra (e.g., secondary metabolite induction/repression), necessitating empirical optimization in fermentation.
Applications in cell-associated work:
While primarily for microbes, some peptones are used in insect/plant cell culture feeds; suitability is source- and grade-dependent and must be validated.
For critical biological applications, verify lot-specific performance and impurities (e.g., endotoxin, metals) per your internal specifications; such values are not specified for this item.
Buffer Applications
Bacteriological peptone is not a buffering agent per se and is not typically used to establish specific pH ranges.
Practical notes (literature/general):
Peptone-containing media often rely on phosphate, Tris, MOPS, or carbonate systems to control pH. Peptone contributes minimal buffering via amino acid side chains but should not be relied upon for pH stabilization.
When preparing media, dissolve peptone fully in water or pre-made buffer, then adjust pH to target (commonly ~6.5–7.4 depending on organism), and sterilize as required.
For defined buffer recipes and pH ranges, consult standard media formulations or prepare dedicated buffers separately. No item-specific buffer data are provided for this product.
Green Alternatives
While bacteriological peptone is itself a biodegradable, water-processable nutrient, sustainability and sourcing can be considered when selecting complex nitrogen sources.
Considerations (literature/general):
Source sustainability: Plant-derived peptones (e.g., soy, wheat, pea), cottonseed, or potato peptones can reduce reliance on animal-derived materials and may align with certain regulatory or ethical frameworks.
Footprint and risk profile: Plant peptones can mitigate risks of animal-borne agents; however, allergen and pesticide-residue risk assessments may be required depending on application and region.
Performance tradeoffs: Peptide profiles differ by source and hydrolysis method (enzymatic vs acid/alkaline). Growth performance and metabolite yields may shift—empirical optimization is advised.
Simple comparison (literature, general):
Source | Pros | Considerations
--- | --- | ---
Animal-derived peptone | Broadly established performance; supports fastidious organisms | Ethical/regulatory constraints; animal-origin risk management
Plant-derived peptone | Renewable; animal-free; often cost-effective | Different amino acid profile; may require re-optimization
Yeast extract (adjunct) | Vitamins/nucleotides-rich; boosts growth | Not a direct replacement for peptide nitrogen; batch variability
Practical guidance:
For greener processes, screen at least 2–3 plant-based peptones at 5–20 g/L, adjusting C/N, salts, and pH to match target organism needs.
Document lot qualification data to ensure reproducibility across campaigns.
Pharmaceutical Uses
No therapeutic claims are made. The following addresses formulation/manufacturing contexts (literature/general):
Upstream bioprocessing:
Complex nutrient in seed trains and small-scale fermentation for production of enzymes, recombinant proteins (microbial hosts), and metabolites. Selection is driven by performance and regulatory risk assessment (animal-origin considerations, TSE/BSE statements where applicable).
Quality control and microbiology testing:
Component of growth media used in environmental monitoring, bioburden testing, and sterility testing where complex nitrogen is needed.
Excipients:
Peptones are generally not used as excipients in finished drug products; instead they are process aids/nutrients. For any use beyond research, suitability, compendial status, and impurity profiles must be evaluated.
Regulatory notes:
For GMP manufacturing, sourcing, traceability, and lot qualification are essential. Endotoxin, bioburden, and adventitious agent controls may be required; specific limits are process- and region-dependent and are not specified for this item.
Item-specific pharmacopeial or regulatory conformance is not specified for this product; refer to CoA/Spec Sheet and your quality system requirements.
Physical Properties
Item-specific facts (from Product Data):
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Storage conditions: Room temperature; shipped under normal conditions.
Other specifications (mp, bp, density, solubility, pH): Not specified for this item; refer to CoA/Spec Sheet.
General properties (literature/general guidance, not item-specific specs):
Physical form: Typically a free-flowing, tan-to-light brown powder or granulate (varies by lot and source).
Solubility: Readily soluble in water; commonly used at 5–20 g/L in media (0.5–2% w/v). Stirring in room-temperature water usually affords a clear to slightly opalescent solution.
pH contribution: A 1–2% w/v aqueous solution often yields near-neutral pH depending on source and processing; final medium pH is typically adjusted with acids/bases after dissolution (literature practice).
Hygroscopicity: Moderate; can absorb ambient moisture leading to caking—store tightly closed.
Thermal behavior: Stable under standard autoclave conditions used for media sterilization (e.g., 121 °C, 15–20 min; literature). Prolonged overheating may induce Maillard-type browning when sugars are present.
Odor: Mild, protein hydrolysate-like.
Note: Use actual lot-specific CoA/Spec Sheet for any required numerical specifications.
Quality and Grades
Item-specific facts (from Product Data):
Grade: BioReagent
What BioReagent grade generally implies (literature/general):
Suitable for common life-science and microbiology workflows, including routine culture media, teaching labs, and general upstream process development. Emphasis on consistent performance in biological applications rather than analytical trace specifications.
Typically controlled for key performance attributes such as solubility, nitrogen content, and growth promotion in representative organisms; precise control tests vary by manufacturer.
Practical implications:
Media performance: BioReagent-grade bacteriological peptone is intended to support robust microbial growth in complex media formulations (e.g., nutrient broths/agar). For highly sensitive applications (e.g., cell therapy manufacturing, endotoxin-stringent fermentation), verify lot suitability via in-house qualification.
Lot-to-lot variability: As a complex hydrolysate, composition can vary. Best practice is to qualify and reserve a lot for critical processes.
Stabilizers/additives: Not specified for this item; refer to CoA/Spec Sheet.
Regulatory status: Not a GMP-controlled designation. For regulated manufacturing, seek documentation and conduct risk assessment aligned to your quality system.
Recommended documentation to consult:
CoA for growth-promotion metrics and typical composition ranges.
SDS for safety and handling.
Technical data sheet for preparation guidance and performance notes (if available).
Reaction and Applications
Focus: microbiology and fermentation, not organic synthesis.
Item-specific facts (from Product Data): Manufacturer application text not provided; general use below is literature-based.
Core applications (literature):
Complex media component: Primary organic nitrogen source supplying peptides, amino acids, and growth factors in nutrient broth/agar, LB-type media (where appropriate), and many selective/differential formulations.
Fermentation: Supports biomass build-up and product formation for bacteria, yeasts, and some fungi. Common in seed trains and small-scale bioprocess development.
Diagnostic microbiology: Included in media supporting recovery of stressed organisms and general heterotroph counts in food/water testing, when formulation permits.
Environmental and industrial microbiology: Nutrient base for enrichment cultures, biodegradation studies, and QC of disinfectants (e.g., neutralizing broths often contain peptones).
Practical tips (literature/practice):
Concentration: Start with 5–10 g/L for general-purpose media; optimize per organism.
Complementary components: Combine with yeast extract and defined salts to balance C/N ratio and supply vitamins and trace elements.
Sterilization: Autoclave peptone-containing media at 121 °C for 15–20 min; alternatively, sterile-filter heat-labile supplements and add post-sterilization.
Lot qualification: Evaluate growth-promotion with representative strains (e.g., E. coli, S. aureus, P. aeruginosa), monitoring OD, colony morphology, and lag times.
Avoid caramelization/Maillard effects: Limit prolonged heating, especially in sugar-rich media.
Reaction Conditions
This product supports biological culture rather than chemical reactions. The following are typical media preparation conditions (literature/general) and not item-specific specifications:
Concentration ranges:
General-purpose media: 5–10 g/L peptone.
Rich media/enrichment: 10–20 g/L peptone, often with yeast extract and carbohydrates.
Dissolution and pH:
Add peptone gradually to room-temperature water with stirring until fully dissolved. Adjust pH to target (commonly 6.5–7.4) after complete dissolution.
Sterilization:
Autoclave complete medium at 121 °C for 15–20 minutes. Alternatively, sterile-filter heat-labile components and add aseptically to autoclaved, cooled base.
Clear to slightly opalescent media; robust growth kinetics when paired with appropriate carbon sources and salts. Actual growth rates and yields depend on organism, formulation, and lot.
Refer to standard microbiology manuals and your SOPs for validated conditions. No item-specific growth-promotion data are provided here.
Safety and Handling
Item-specific hazard data (from Product Data):
GHS classification: Not specified for this item; refer to SDS.
Signal word / H-statements / pictograms: Not specified for this item; refer to SDS.
General laboratory safety (literature/practice):
Expected hazards: Low acute toxicity as a protein hydrolysate; dust may cause mechanical eye irritation or transient respiratory discomfort. Avoid inhalation of dust and contact with eyes.
PPE: Laboratory coat, safety glasses, and appropriate gloves. Use a dust mask or work in a fume hood if generating airborne particles.
Handling: Minimize dust formation. Add powder slowly to water with stirring to reduce clumping and aerosolization.
Incompatibilities: No strong chemical incompatibilities typical for use context; avoid mixing with strong oxidizers. Prevent microbial contamination of opened containers.
First aid (overview; defer to SDS): If inhaled, move to fresh air. In case of eye contact, rinse cautiously with water for several minutes. If on skin, wash with soap and water. If ingested in laboratory context, rinse mouth; seek medical advice if symptoms occur.
Sterility considerations: Use aseptic technique during media preparation. Sterilize by autoclaving or sterile filtration of solutions, per protocol requirements.
Always consult the product’s SDS and institutional EHS guidance for authoritative safety information.
Solvent Selection
This product is a solid nutrient mixture rather than a solvent. Solvent selection is therefore about dissolution for media preparation rather than chromatographic or reaction solvent choice.
Primary: Deionized/distilled water is standard. Typical working concentrations: 5–20 g/L depending on medium design and organismal needs.
Buffers/saline: Peptone dissolves readily in physiological saline (e.g., 0.85–0.9% NaCl) or buffered solutions (e.g., phosphate buffers) when isotonicity or pH control is desired.
pH management: Adjust pH after complete dissolution; peptones can slightly influence pH due to amino/carboxylate groups.
Temperature: Room temperature is generally sufficient; gentle warming (≤40–50 °C) can accelerate dissolution but avoid overheating to prevent undesired reactions in the presence of sugars.
Comparison with alternatives (literature):
Casein/tryptone vs general bacteriological peptone: Tryptone (pancreatic digest of casein) is commonly used in LB; general bacteriological peptone supports a broader range of complex media but may differ in peptide profile and growth performance.
Yeast extract: Complements peptone by supplying vitamins and nucleotides; not a substitute for peptide nitrogen but often used together.
For precise solubility curves or conductivity values, consult the lot-specific CoA/Spec Sheet.
Storage and Reconstitution
Item-specific facts (from Product Data):
Storage conditions: Room temperature.
Shipped in: Normal conditions.
General guidance for storage (literature/practice):
Keep tightly closed in a cool, dry place. Protect from moisture to prevent caking and from microbial contamination. If subdividing, use clean, dry containers under low-humidity conditions.
Avoid prolonged exposure to high heat or direct sunlight.
Reconstitution/preparation (literature/general):
Dissolve the required mass of peptone in high-purity water to the desired concentration (commonly 5–20 g/L). Mix thoroughly until fully dissolved; mild warming can aid dissolution. Adjust pH after dissolution.
Sterilization: Autoclave peptone-containing media at 121 °C for 15–20 min. Alternatively, prepare a concentrated stock and sterile-filter (0.22 µm) if heat-labile components are present; store sterile stocks refrigerated and use promptly (observe aseptic practices).
Shelf life of solutions: Use freshly prepared solutions when possible. For stored sterile solutions, monitor for turbidity, pH drift, or odor as indicators of contamination or degradation (no item-specific shelf life stated).
For any numerical or lot-specific parameters (e.g., microbial limits, nitrogen content), consult the CoA/Spec Sheet. For safety information, consult the SDS. Research use only (per Product Data).
Structure and Identity
Brief overview: Bacteriological peptone is a complex, undefined mixture of peptides, amino acids, and small proteins generated by the partial hydrolysis of protein sources. It is a foundational nutrient for microbial culture media.
CAS: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES/InChI/InChIKey: Not applicable for complex mixtures; not specified for this item.
General description (literature):
Composition: Heterogeneous mixture of oligopeptides, free amino acids, and residual proteins; may contain trace salts and carbohydrates depending on source and hydrolysis method.
Structural features: No single defined 2D structure; the material comprises a distribution of peptide chain lengths (typically dipeptides to ~kDa-range fragments, literature).
Synthetic Utility
Bacteriological peptone is not a typical reagent or building block for small-molecule synthesis.
Applicability (honest assessment):
Not commonly employed in named organic reactions, cross-couplings, or as a defined functional-group synthon since it is a complex, heterogeneous mixture.
Where it can be relevant (literature/general):
Biocatalysis/fermentation workflows to produce biotransformation catalysts (whole cells or crude enzyme preparations) that are subsequently applied in chemoenzymatic synthesis.
As a nutrient in screening libraries of microbial strains that generate secondary metabolites, which can be isolated and used as synthetic intermediates.
For synthetic chemistry tasks, refer instead to defined amino acids, peptides, or protected derivatives with known structures and purities.
Target Specificity
Not applicable. This product is not an antibody, probe, or targeted biochemical and does not possess antigen/epitope specificity.
Item-specific data: None provided in Product Data.
Guidance: For organism-specific media selectivity, combine peptone with selective agents or differential substrates according to validated formulations.
Foire aux questions
How should this product be stored?
Store at room temperature.
Besoin d'aide pour choisir la qualité ?
Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.
Nous utilisons des cookies pour garantir le bon fonctionnement du site et, lorsque cela est autorisé, pour améliorer votre expérience. Vous pouvez gérer vos préférences à tout moment dans les Paramètres. Pour en savoir plus, consultez notre Politique relative aux cookies.
Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?
Me rappeler plus tard
Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.