QUALITÉ & PURETÉPrimorTrace™?PrimorTrace™ — Aladdin's trace-metal-analysis line with ultra-low metal background. Use for ICP/AAS trace-metal work where contamination must be minimal.≥99.99% metals basispowder,＞100 mesh
Synonyms
AKOS015832970 | Bismuth Internal Standard in Mineral Oil - Bi @ 0.793 g/L | Bismuth shot, elongated | Bismuth, foil, thickness 0.045 mm, size 150 x 150 mm, purity 99.97% | Klingtite | 7-amino-4-hydroxy-naphthalene-2-sulfonic acid | Bismuth - Bi @ 1000 mic
PrimorTrace™, ≥99.99% metals basis, powder,＞100 mesh PrimorTrace™ pour les flux de travail chromatographiques et analytiques sensibles nécessitant une interférence de ligne de base minimale.
🌡
Stockage & expédition
Room temperature,Argon charged Expédition Normal. Consultez le COA spécifique au lot pour les spécifications exactes.
📋
Documents qualité
SDS, COA, fiche technique et fiche de spécifications disponibles au téléchargement. COA spécifique au lot accessible via la recherche par numéro de lot.
📚
Preuve documentaire
Cité dans 69 publications à comité de lecture couvrant la chromatographie, la synthèse organique et les réactions de couplage croisé.
Spécifications
Synonymes
AKOS015832970 | Bismuth Internal Standard in Mineral Oil - Bi @ 0.793 g/L | Bismuth shot, elongated | Bismuth, foil, thickness 0.045 mm, size 150 x 150 mm, purity 99.97% | Klingtite | 7-amino-4-hydroxy-naphthalene-2-sulfonic acid | Bismuth - Bi @ 1000 mic
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Avis
Avis des clients
Foire aux questions
What does the trace-metals specification mean?
This product is specified at ≥99.99% on a trace-metals basis. That figure describes metallic impurity content rather than overall chemical assay, so it is the relevant specification for ICP-MS, semiconductor and battery applications. Lot-specific values are stated on the Certificate of Analysis.
What does PrimorTrace? mean?
PrimorTrace? indicates that the chemical has been purified and tested specifically for use in trace and elemental analysis. Key specifications typically include controlled UV absorbance at common detection wavelengths, low non-volatile residue, controlled moisture content, and verified lot-to-lot consistency. PrimorTrace? is used for mobile phases, sample preparation and analytical standards in this workflow.
How should this product be stored?
Store at room temperature under argon. It is supplied under an argon blanket; reseal under inert gas after each use.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 7440-69-9, the molecular formula is Bi, and the molecular weight is 208.98 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.
Nous utilisons des cookies pour garantir le bon fonctionnement du site et, lorsque cela est autorisé, pour améliorer votre expérience. Vous pouvez gérer vos préférences à tout moment dans les Paramètres. Pour en savoir plus, consultez notre Politique relative aux cookies.
Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?
Me rappeler plus tard
Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.
A2416170