Brucella Agar - BioReagent

Cat. No.: B1528318
DISPONIBLE À COMMANDE
QUALITÉ & PURETÉ BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Suitable for microbiology ? Microbiology grade — suited to culturing and testing microorganisms. Use in microbial media, identification, and susceptibility work.
Storage
Protected from light,Room temperature
Shipped In
Normal
★
Taille
Allemagne (EU)
USA*
Prix
Qté
250g
B1528318-250g
Sur commande · 8–12 semaines
60,65€
Enter a quantity for the sizes you want to add.

Vue d’ensemble

Brucella Agar is suitable for the isolation and culture of Brucella species and Campylobacter species. This medium is nutritionally rich and can support the growth of fastidious microorganisms.


Medium Formula (per liter):

ComponentContent
Pancreatic Digest of Casein10.0g
Peptic Digest of Animal Tissue10.0g
Dextrose1.0g
Yeast Extract2.0g
Sodium Chloride5.0g
Sodium Bisulfite0.1g
Agar15.0g
pH (25℃)7.0±0.2

Instructions for Use:

Weigh 43.1 g of this product into 1 L of distilled water, stir and heat to boiling until completely dissolved, dispense, autoclave at 121 °C for 15 minutes, and set aside for use.


Precautions:

1. Avoid direct contact with skin and eyes during handling. In case of accidental contact, rinse immediately with plenty of clean water.

2. This product is for laboratory research only and is not intended for clinical diagnosis.

Spécifications

Spécifications et pureté
BioReagent, Suitable for microbiology
Application
Isolation of Brucella spp. and Campylobacter spp.
Stabilité et stockage
Store at room temperature long term (36 months).Store in the dark.
Conditions de stockage de stockage
Protected from light,Room temperature
Expédié en
Normal
Grade
BioReagent, Suitable for microbiology
Product Line
Produits biologiques

Données avancées

Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Propriétés chimiques et physiques
SensibilitéLight-sensitive
FAQ et articles
Calculateurs de solution
Avis

Avis des clients

Application Protocols

The following protocols are general, literature-based guidance for preparing and using Brucella Agar. They are not item-specific specifications; consult the product CoA/Spec Sheet and your SOPs.

A. Preparation of Brucella Agar plates (literature)

  1. Weigh dehydrated medium according to the manufacturer’s recommended mass per liter (often in the 40–45 g/L range for Brucella agar-type media; check CoA).
  2. Add to ~900 mL purified/deionized water; heat with stirring until completely dissolved. Bring to 1 L with water.
  3. Autoclave at 121 °C for 15 minutes.
  4. Cool to 45–50 °C. If required, aseptically add supplements (e.g., 5–10% sterile defibrinated sheep/horse blood; hemin/vitamin K1 for anaerobes; selective antibiotics per protocol).
  5. Mix gently to avoid bubbles; pour into sterile petri dishes (≈20–25 mL per 90-mm plate). Allow to solidify.
  6. For anaerobes, pre-reduce plates in an anaerobic chamber or jar for several hours before inoculation.

B. Inoculation and incubation (literature)

  • Streak/spot inoculate as per method. Incubate inverted plates at 35–37 °C under the appropriate atmosphere (aerobic, CO2-enriched, anaerobic, or microaerophilic) and duration per organism.

C. Quality checks (literature)

  • Visual inspection for color, clarity, and gel consistency.
  • Optional: Verify pH and perform growth promotion with control strains consistent with your QA program.
Biological Roles

This product does not have a single biological role as a molecule; rather, it provides a nutritional and physicochemical environment that supports microbial life.

Functional roles of components (literature/typical)

  • Peptones/enzymatic digests: Supply amino acids, short peptides, and growth factors essential for protein synthesis and primary metabolism of fastidious bacteria.
  • Yeast extract: Provides B-vitamins, nucleotides, and trace elements that can be growth-limiting in defined media.
  • Carbohydrate (e.g., dextrose): Readily metabolizable carbon and energy source, influencing acid production and redox balance.
  • Sodium chloride and minerals: Maintain osmotic balance and provide essential ions for enzyme function and membrane transport.
  • Reducing agents (e.g., sodium bisulfite in some formulations): Lower redox potential, improving recovery of microaerophiles/anaerobes (literature).
  • Agar: Inert gelling matrix enabling colony isolation and differential observation (e.g., hemolysis when supplemented with blood).

Use context

  • Enables recovery, maintenance, and study of physiological traits under aerobic, microaerophilic, or anaerobic conditions depending on incubation and supplementation.

Item-specific identity markers (molecular formula, MW) are not applicable to this complex mixture; see the product CoA for performance characteristics relevant to your organisms.

Buffer Applications

Not typically applicable. Brucella Agar is a nutrient medium rather than a defined buffering system.

  • If buffering capacity is needed for a specific assay, incorporate appropriate buffer salts or use a medium that includes defined buffers (e.g., phosphate or HEPES) per established microbiological protocols (literature).
  • For pH control in culture, rely on the medium’s intrinsic components and CO2/incubation conditions, or adjust with sterile buffer solutions post-sterilization as validated for the organism.

Refer to your method-specific SOPs for any required buffering additives when using this medium.

Green Alternatives

Green chemistry concepts are only indirectly applicable to culture media, but sustainability can be improved in media preparation and use.

  • Reduce energy use: Optimize autoclave loads and cycle times consistent with sterility assurance to minimize steam and power consumption. Consider validated fractional sterilization for certain supplements rather than prolonged autoclaving.
  • Minimize waste: Pour only the number of plates required; store prepared plates appropriately to extend usable lifetime. Use reusable glassware where feasible to reduce single-use plastics.
  • Source responsibly: When possible, select media or supplements derived from sustainably sourced peptones or consider animal-free (plant/yeast/soy) alternatives if compatible with your organisms and study goals (literature).
  • Safer additives: Prefer less hazardous disinfectants for cleanup (e.g., 70% ethanol) where effective and compliant; reserve hypochlorite or aldehyde-based agents for situations requiring higher level disinfection.

Comparison (literature, qualitative):

  • Brucella Agar vs. Tryptic Soy/Brain Heart Infusion: Brucella formulations often better support certain anaerobes; however, plant-based peptone media may offer similar performance with reduced animal-derived content. Trade-off: performance equivalence must be verified for the organisms of interest before wholesale substitution.

Note: Any change in medium composition may alter growth yields and phenotypes; revalidate methods when adopting greener alternatives.

Pharmaceutical Uses

No therapeutic or clinical use is claimed or supported for this product. For research use only.

Relevant non-clinical/industrial contexts (general/literature)

  • Microbiological quality control: Brucella Agar or its base can be used in research and development laboratories for cultivating fastidious organisms in environmental or process-related studies. In regulated QC labs, the exact medium, supplements, and test methods must match compendial or validated procedures.
  • Process development and characterization: Suitable for generating biomass for analytical characterization (e.g., protein profiling, sequencing, metabolite extraction) of target strains used in research settings.
  • Environmental monitoring studies (research context): Evaluation of anaerobic/microaerophilic communities in materials or simulated environments when protocols specify this medium.

If intending to use in a regulated environment, verify acceptance criteria (growth promotion, pH, gel strength) and any compendial cross-references via your internal validation and the product’s CoA/Spec Sheet.

Physical Properties

Item-specific (Product Data)

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Storage Conditions: Room temperature
  • Shipped in: Normal
  • Other physico-chemical specifications (pH, water content, etc.): Not specified for this item; refer to CoA/Spec Sheet.

General properties (literature/typical for dehydrated Brucella agar media)

  • Physical form: Free-flowing, tan to beige dehydrated powder; forms a firm gel after dissolution and sterilization (literature).
  • Solubility: Intended to dissolve/disperse in purified water with heating; not soluble in organic solvents (literature).
  • Prepared medium pH: Often near neutral (typical target around pH 7.0 at 25 °C after sterilization; literature). Actual acceptable range is manufacturer-specific.
  • Gel strength: Determined by agar content and ionic strength; adequate to form plates suitable for colony isolation (literature).
  • Optical clarity: Prepared plates typically slight amber and translucent; clarity varies with supplements (e.g., defibrinated blood renders opaque, chocolate agar upon heating; literature).

Use-relevant attributes (literature)

  • Redox behavior: Inclusion of reducing components (e.g., sodium bisulfite) and growth factors helps support fastidious/anaerobic organisms; redox potential further lowered under anaerobic incubation.
  • Compatibility: Accepts a variety of supplements (5–10% sterile defibrinated sheep/horse blood, selective antibiotics) depending on organismal requirements (literature).

Note: Any numeric values or limits for this specific lot should be taken from the product’s CoA/Spec Sheet.

Quality and Grades

Item-specific (Product Data)

  • Grade: BioReagent

What BioReagent grade implies (general)

  • BioReagent denotes suitability for common biological laboratory procedures, including culture media preparation, where consistency of nutrient content, low inhibitory contaminant levels, and reproducible performance are critical. Unlike ACS or HPLC grades tied to single-molecule purity, complex media are qualified by functional tests.

Quality attributes relevant to Brucella Agar (general/literature)

  • Growth promotion testing (GPT): Lots are typically qualified by demonstrating expected recovery and colony morphology of representative fastidious organisms (e.g., Brucella spp., Bacteroides spp., or other anaerobes when supplemented). Exact panel and acceptance criteria are manufacturer-specific; consult the CoA.
  • Physicochemical checks: Appearance, moisture content, pH of a 4–5% prepared medium post-sterilization, and gel strength are often verified (ranges provided on CoA/Spec Sheet).
  • Sterility assurance: Dehydrated medium is non-sterile by default; sterility is achieved by user autoclaving. Absence of inhibitory residues (e.g., peroxides) and heavy metals is managed via raw-material controls rather than single-analyte limits for a defined compound.

For lot-specific performance data, acceptance ranges, and any recommended supplements, refer to the CoA/Spec Sheet accompanying this item.

Reaction and Applications

As a complex microbiological medium, Brucella Agar is not used in chemical synthesis reactions. Its “applications” are in cultivating microorganisms for research.

Item-specific (Product Data)

  • Manufacturer Applications: Not specified beyond product name; this item is for research use only.

Microbiological applications (literature/typical)

  • Primary use: Cultivation and enumeration of Brucella species and other fastidious organisms. Widely adopted for anaerobic bacteriology; supports many Bacteroides, Prevotella, Porphyromonas, and some gram-positive anaerobes when incubated anaerobically and supplemented as needed.
  • Supplementation: Frequently enriched with 5–10% defibrinated sheep or horse blood to enhance growth and detect hemolysis; vitamin K1 and hemin further support anaerobes. Selective variants include antibiotic additions (e.g., polymyxin, vancomycin) depending on target flora (literature).
  • Use cases in research: Isolation from environmental/food/industrial samples; maintenance of laboratory strains; growth for downstream phenotypic assays, DNA/RNA extraction, metabolomics, or antimicrobial susceptibility testing (when protocols specify Brucella Agar or Brucella Agar Base).

Practical tips (literature)

  • Thoroughly dissolve powder with heat and mix to uniformity before sterilization; adjust supplementation temperature to protect labile factors.
  • Pre-reduce plates for strict anaerobes by holding in an anaerobic chamber or jar before inoculation.
  • Validate performance with control strains as part of laboratory QA.
Reaction Conditions

Chemical reaction conditions are not applicable. Instead, the relevant “conditions” pertain to medium preparation and incubation for microbial culture.

Preparation conditions (general/literature)

  • Dissolution: Suspend the dehydrated medium in purified water with gentle heating and stirring until fully dissolved.
  • Sterilization: Autoclave at 121 °C for ~15 minutes. Do not over-autoclave to avoid Maillard reactions and nutrient degradation.
  • Cooling and supplementation: Cool to 45–50 °C before adding heat-labile supplements (e.g., sterile defibrinated blood 5–10%, hemin, vitamin K1, selective antibiotics) under aseptic conditions.

Incubation conditions (literature/typical examples—adjust per organism)

  • Brucella spp.: 35–37 °C under aerobic or 5–10% CO2; prolonged incubation may be required for slow growers.
  • Anaerobes: 35–37 °C in an anaerobic atmosphere; pre-reduce plates and incubate in anaerobic jars/chambers.
  • Microaerophiles (e.g., Campylobacter when using related Brucella-based blood agars): 35–42 °C in microaerophilic gas mixes.

These are generalized, literature-based guidelines; consult organism-specific manuals and your validated SOPs. For item-specific numeric specifications (e.g., preparation mass per liter, pH targets), refer to the CoA/Spec Sheet.

Safety and Handling

Item-specific (Product Data)

  • GHS classification / Signal word / H-statements / Pictograms: Not specified for this item; refer to SDS.
  • Research Use Note: For research use only.

General safety guidance (literature/typical for dehydrated culture media)

  • Hazards: Dehydrated media may cause respiratory or skin sensitization in susceptible individuals due to proteinaceous peptones; avoid dust generation and inhalation. Not intrinsically pathogenic, but once hydrated/inoculated, the medium will support microbial growth and must be handled as biohazardous material.
  • PPE: Laboratory coat, nitrile gloves, and safety glasses. Use a dust mask/respirator if handling large quantities that generate dust aerosols. Prepare and pour plates in a biosafety cabinet when appropriate for target organisms.
  • Incompatibilities: Avoid contact with strong oxidizers or acids/bases that can degrade peptones and agar. Keep dry; moisture uptake leads to clumping and compromised performance.
  • First aid (overview): If inhaled (dust), move to fresh air; if on skin/eyes, rinse with water. If ingested, rinse mouth; seek medical attention as needed. Always follow institutional biosafety protocols.
  • Sterilization and waste: Autoclave prepared, unused medium and all cultures/plates before disposal. Decontaminate work surfaces with appropriate disinfectants (e.g., 70% ethanol, hypochlorite) after use.

Always consult the product SDS and local biosafety guidelines for authoritative, current safety information.

Solvent Selection

This product is a dehydrated culture medium intended to be prepared in water; organic solvent selection is not applicable.

  • Item-specific (Product Data): No solvent parameters specified; prepare with purified/deionized water per laboratory SOPs.
  • General guidance (literature):
    • Use freshly distilled or deionized water with low ionic contamination to ensure consistent gelation and pH.
    • Avoid high-chloride or high-hardness water that can alter gel strength and organism recovery.
    • Supplements (e.g., blood, antibiotics, hemin, vitamin K1) are aqueous or sterile-filtered solutions added after cooling to 45–50 °C (for heat-labile components).

When organic solvent choice is a concern for your workflow, it likely pertains to extraction or downstream analytics rather than medium preparation; see Reaction & Applications for culture-oriented context.

Storage and Reconstitution

Item-specific (Product Data)

  • Storage Conditions (as supplied): Room temperature
  • Shipped in: Normal

General storage guidance (literature/typical)

  • Keep container tightly closed in a cool, dry place. Protect from moisture and high humidity to prevent clumping and degradation.
  • Avoid prolonged exposure to light and heat that may reduce performance.

Reconstitution and stability (literature guidance)

  • Reconstitution: Dissolve the recommended mass per liter in purified water with heating; autoclave at 121 °C for ~15 minutes. Cool to 45–50 °C before adding heat-labile supplements.
  • Prepared plates: Store inverted in sealed sleeves or containers at 2–8 °C to minimize drying and contamination. Typical usable lifetime is days to a few weeks, depending on supplements and storage; verify with in-house QC.
  • Prepared broths: If applicable, store at 2–8 °C and use promptly; avoid repeated warming/cooling cycles.
  • Do not freeze agar plates as gel structure may be compromised.

For any lot-specific instructions (e.g., recommended grams per liter, acceptable pH after sterilization), consult the product’s CoA/Spec Sheet. Research use only.

Structure and Identity

Item-specific (Product Data)

  • Product name: Brucella Agar (SKU: B1528318)
  • Grade/Purity: BioReagent
  • CAS: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • SMILES / InChIKey: Not applicable — complex, undefined mixture (dehydrated culture medium), not a single chemical entity.

General description (literature/typical)

  • Brucella Agar is a complex nutrient medium formulated to support the cultivation of fastidious microorganisms, notably Brucella spp., and is widely used for anaerobes and microaerophiles when appropriately supplemented.
  • As a mixture, it typically contains enzymatic digests of casein/animal tissues, yeast extract, dextrose, sodium chloride, reducing components (e.g., sodium bisulfite), and agar as a gelling agent (literature). Exact composition and lot specifications vary by manufacturer.

Structural features (conceptual)

  • No discrete 2D/3D structure: the product comprises heterogeneous biopolymers (peptones), small molecules (sugars, salts, sulfur-containing reductants), and polysaccharide agar. Functional groups present across components include peptides (amide bonds), carbohydrates (polyhydroxy), sulfate/galactose units in agar, and inorganic/organic anions/cations.

Identity considerations

  • Identity is established by medium performance (growth promotion testing), appearance, solubility/clarity after sterilization, and pH of the prepared medium (per lot CoA), not by single-molecule identifiers.
Synthetic Utility

Not applicable to chemical synthesis. Brucella Agar is a biological culture medium and does not serve as a reagent or building block in organic or inorganic synthesis.

For practical laboratory utility, see:

  • Reaction & Applications: Microbiological cultivation contexts.
  • Application Protocols: Typical preparation and plating procedures (literature guidance).

If your workflow involves extraction of microbial metabolites grown on this medium, select downstream chemical reagents and solvents based on the target analytes; the medium itself is not a reactant.

Target Specificity

Not applicable. This product is not an antibody or affinity reagent and has no defined molecular target or species reactivity profile.

  • Item-specific (Product Data): No target/epitope information provided.
  • General note: Selectivity for organisms arises from nutritional composition and optional selective supplements, not from a binding interaction.

Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?

Me rappeler plus tard

Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.

Oups ! Les notifications sont désactivées.