QUALITÉ & PURETÉBioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
For cultivation of Brucella and isolation and motility testing of Campylobacter
Spécifications
Spécifications et pureté
BioReagent
Conditions de stockage de stockage
Room temperature
Expédié en
Normal
Grade
BioReagent
Product Line
Produits biologiques
Données avancées
Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculateurs de solution
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Avis
Avis des clients
Application Protocols
Item-specific
Manufacturer-provided protocols: Not specified for this item; refer to CoA/Spec Sheet.
General preparation protocol (literature/practice)
Calculate required volume; weigh dehydrated Brucella Broth at 25–30 g per liter of purified water (use the label instruction for your lot when available).
Add powder gradually to room-temperature water with stirring until completely dispersed.
Heat gently if needed to aid dissolution; avoid boiling.
Adjust pH only if procedure requires; typical target pH is ~7.0–7.2 at 25 °C (check formulation guidance).
Dispense into suitable vessels; cap loosely for autoclaving.
Sterilize at 121 °C for 15 min. Allow to cool to 45–50 °C.
Aseptically add sterile supplements (e.g., serum, blood, hemin, vitamin K1, antibiotics) as required by your method; mix gently.
If anaerobic culture is intended, pre-reduce under anaerobic conditions before inoculation.
Store sterile, unused broth at 2–8 °C per lab SOP; avoid prolonged storage of supplemented media.
Quality checks
Inspect for clarity and correct color; verify pH; perform growth-promotion with relevant strains after any significant process change.
Biological Roles
Applicability
Not a single biomolecule; rather, a composite nutrient matrix supporting microbial physiology.
Functional role in microbiology (literature)
Carbon and energy sources: Carbohydrate (often dextrose) and peptides serve as fermentable substrates and anabolic precursors.
Nitrogen and sulfur sources: Peptones and casein/animal tissue digests provide amino acids, small peptides, and growth factors.
Vitamins and cofactors: Yeast extract contributes B-vitamins, nucleotides, and trace growth factors essential for fastidious bacteria such as Brucella spp.
Osmotic balance and ionic strength: Sodium chloride and phosphate/sulfite salts regulate osmolarity and provide weak buffering/redox control.
Redox environment: In anaerobic culture, reducing components (intrinsic amino acids, optional sulfite/cysteine) help establish a lower redox potential conducive to strict anaerobes when combined with oxygen-exclusion techniques.
Use considerations
Because composition is complex and partially undefined, growth phenotypes (e.g., pigment production, enzyme expression) can vary with lot and supplement choice. For critical studies, document medium lot, supplement sources, and incubation parameters to ensure reproducibility.
Buffer Applications
Relevance
Brucella Broth is not a dedicated buffer system; however, prepared medium exhibits weak buffering near neutral pH due to peptides and any phosphate present in the formulation.
General guidance (literature)
Typical prepared pH: Approximately 7.0–7.2 at 25 °C (formulation-dependent). This range suits many neutrophilic bacteria, including Brucella spp.
pH control: If strict pH control is required (e.g., metabolic studies), monitor and, if permitted by your method, overlay with CO2-regulated incubation or incorporate a defined buffer system (e.g., phosphate or HEPES) validated not to inhibit the organism.
Preparation hints: Avoid CO2 absorption during cooling if you need to maintain specific pH; cool covered and equilibrate in the target atmosphere (aerobic vs anaerobic) before inoculation.
Limitations
Broth media are not substitutes for analytical buffers; titration capacity is limited, and microbial metabolism can quickly acidify/alkalinize the medium. For electrophoresis or biochemical assays, use defined buffer systems prepared separately.
Green Alternatives
Context
As a dehydrated microbiological medium, Brucella Broth has modest environmental impact in use; principal considerations are water/energy use during sterilization and disposal of biological waste.
Greener practice options (literature/practice)
Process efficiency: Autoclave full loads and use validated, shortest effective cycles to reduce energy and water consumption.
Right-sizing: Prepare only the volume needed; minimize discarded, expired sterile broth.
Packaging: Choose larger pack sizes to reduce packaging waste where turnover justifies it; segregate clean outer packaging from biohazardous waste for proper recycling.
Media selection: For non-fastidious organisms, consider less enriched media (e.g., TSB) that may require fewer supplements and energy-intensive handling.
Comparison (illustrative)
Brucella Broth vs Ready-to-use sterile bottles
Dehydrated (this product): Lower shipping mass/volume, sterilized on-site; requires autoclave energy and lab labor.
Ready-to-use sterile media: Higher transport footprint; saves autoclave cycles and water but increases packaging waste.
Trade-offs
Supplement choices (e.g., animal-derived sera) carry sustainability and ethical dimensions; where acceptable, consider non-animal supplements validated for target organisms.
Pharmaceutical Uses
Scope
No therapeutic use. For research and quality-control applications only.
Industry applications (literature/practice)
Microbiological quality control: Employed as a growth medium for compendial growth-promotion testing (GPT) and method suitability when fastidious or anaerobic organisms are required by test panels.
Environmental monitoring and sterility investigations: Serves as an enrichment medium in root-cause analyses where recovery of stressed organisms is desired.
Antibiotic studies: Acts as a basal medium (with defined supplements) for in vitro antimicrobial susceptibility testing of fastidious bacteria per internal SOPs or recognized standards.
Regulatory notes
When used in GMP settings, each lot should be qualified for GPT, sterility, pH, and clarity against pharmacopeial or internal specifications. Document all supplements, sterilization parameters, and incubation conditions.
Item-specific
Pharmacopeia listing/status and any specific QC acceptance criteria for this item: Not specified for this item; refer to CoA/Spec Sheet.
Physical Properties
Item-specific (from Product Data)
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Storage Conditions: Room temperature (per Product Data).
General properties (literature; typical for dehydrated Brucella Broth)
Physical state: Hygroscopic, free-flowing beige/tan powder (literature; may vary by lot/manufacturer).
Typical reconstitution: ~25–30 g per liter of purified water to achieve pH ~7.0–7.3 at 25 °C (literature, formulation-dependent).
Sterilization: Autoclave at 121 °C for 15 minutes (literature practice for non-heat-labile media).
pH (prepared medium): Commonly around 7.0–7.2 at 25 °C (literature; check label/CoA for this item).
Not applicable/not defined for complex media
Boiling point, melting point, density, logP, refractive index, molar mass, SMILES: Not applicable to undefined mixtures.
Notes
Exact composition and physical constants are formulation-specific. For this catalog item, values not explicitly listed above are: Not specified for this item; refer to CoA/Spec Sheet.
Quality and Grades
Item-specific (from Product Data)
Grade: BioReagent.
What BioReagent grade typically implies (general guidance)
Suitable for biological and microbiological research workflows, with controlled bioburden and chemical background appropriate for culturing and analytical use in the life-science lab.
While high quality, complex media are not compositionally “defined”; component lots (peptones/yeast extract) are qualified to deliver consistent performance (e.g., growth promotion, pH, clarity) within specification.
Quality considerations specific to complex media
Growth performance: Manufacturers typically verify with specified test strains (e.g., Brucella spp. or fastidious anaerobes) for growth promotion. For this catalog item, specific strains and acceptance criteria are: Not specified for this item; refer to CoA/Spec Sheet.
Chemical background: Low inhibitory contaminants (e.g., heavy metals, residual peroxides) are controlled indirectly via performance testing; numeric limits are rarely assigned. Any specific numerical limits for this item are: Not specified for this item; refer to CoA/Spec Sheet.
Filtration/clarity: Prepared medium should be clear to slightly opalescent. If excessive precipitate/turbidity appears pre-inoculation, review water quality and sterilization.
Documentation
For lot-specific composition ranges, pH targets, and growth-promotion data: Refer to CoA/Spec Sheet.
Reaction and Applications
Scope
Not a chemical reagent for synthesis; instead, a complex nutrient medium for microbiology.
Applications (literature/practice)
Primary use: Cultivation and maintenance of Brucella spp. and other fastidious organisms; supports anaerobes and microaerophiles when appropriately supplemented (e.g., blood/serum, hemin, vitamin K1) and incubated under reduced oxygen.
Selective/antimicrobial testing: Serves as the basal medium for antibiotic-supplemented formulations (e.g., Brucella Broth/Blood Agar with antimicrobials) for susceptibility testing of fastidious organisms per laboratory SOPs and compendial methods.
Enrichment: Useful as a non-selective enrichment broth for recovery of stressed or low-number cells prior to isolation.
Anaerobic culture workflows: Commonly employed with anaerobic jars/chambers and redox indicators (e.g., resazurin) to verify anaerobiosis.
Practical tips
Pre-reduce media for strict anaerobes by boiling and holding under anoxic gas (N2/CO2) or by adding reducing agents (e.g., cysteine, sodium thioglycollate) as permitted by your method.
Supplementation strategy should reflect organism physiology; serum enhances lipid growth factors; yeast extract supplies vitamins and nucleotides.
Validate growth-promotion with relevant strains and incubation conditions after any change to water source, autoclave cycle, or supplement lot.
Manufacturer Applications
No specific application notes were provided in Product Data. Use cases above are general literature guidance.
Reaction Conditions
Not a chemical reaction reagent
This section does not apply to chemical synthesis.
Culture conditions (literature/practice for use as a growth medium)
Reconstitution: Commonly 25–30 g/L in purified water (exact label directions vary by manufacturer/formulation).
Sterilization: Autoclave at 121 °C for 15 minutes. Cool to 45–50 °C before adding heat-labile supplements aseptically.
Supplements: For fastidious organisms, add 5–10% sterile serum or blood; for strict anaerobes, include hemin (5–10 mg/L) and vitamin K1 (1 mg/L) if required by method.
Atmosphere: Aerobic, microaerophilic, or anaerobic as required; pre-reduce medium for strict anaerobes and confirm low redox with an indicator (e.g., colorless resazurin/methylene blue).
Temperature/time: Incubate per organism requirements (e.g., 35–37 °C for many mesophiles) until visible growth or assay endpoint; durations commonly 24–72 h for enrichment, longer for slow growers.
Note
Values above are general literature guidance. For this catalog item, any specific preparation instructions, pH targets, or additives are: Not specified for this item; refer to CoA/Spec Sheet.
Safety and Handling
Item-specific (from Product Data)
GHS classification, signal word, pictograms, H-statements: Not specified for this item; refer to SDS.
Storage conditions: Room temperature. Shipped at ambient conditions.
Research Use Note: For research use only.
General guidance (literature/practice for dehydrated culture media)
Hazards: Generally regarded as low hazard; may cause dust-related eye, skin, and respiratory irritation. Not sterile in the supplied form.
PPE: Use lab coat, safety glasses, and disposable gloves. Avoid breathing dust; handle powders in a fume hood or use local exhaust if dusting.
Incompatibilities: Strong oxidizers and moisture (cake formation, degradation). Keep container tightly closed in a dry place. Avoid microbial contamination of the container.
First aid: If inhaled—move to fresh air; if eye/skin contact—rinse with water; if ingested—rinse mouth and seek medical attention if symptoms persist. Always follow institutional SOPs.
Microbiological safety: Prepared broth is intended to cultivate microorganisms. Handle inoculated media under appropriate biosafety level (BSL) according to organism risk group (e.g., Brucella spp. require enhanced biosafety measures). Decontaminate spent media by autoclaving before disposal.
SDS: For authoritative hazard, exposure limits, and spill/cleanup instructions, consult the product SDS.
Solvent Selection
Applicability
This product is a dehydrated culture medium intended to be reconstituted in water; organic solvent selection is not applicable.
Practical guidance (literature/practice)
Water quality: Use freshly prepared, oxygenated Type I or Type II water (ASTM/CLSI) with low TOC and conductivity ≤1–5 µS/cm. Avoid deionizers that leach amines or silica, which may affect clarity/growth.
Reconstitution: Add the measured powder slowly to room-temperature water with stirring to minimize clumping and dust generation.
Sterilization: Autoclave at 121 °C for 15 min unless using heat-labile supplements (sterile-filter supplements separately and aseptically add after cooling to 45–50 °C).
Supplements: For fastidious organisms, aseptically add sterile defibrinated blood or serum (e.g., 5–10% v/v), hemin, vitamin K1, or antibiotics to create selective/enriched variants as required by your method.
Comparison to alternatives (literature)
Brucella Broth vs. TSB/BHI: Brucella Broth is optimized for fastidious and anaerobic organisms (and as a base for selective formulations), whereas TSB and BHI provide broader-spectrum growth; choose based on organism requirements and downstream assays.
As supplied: Keep container tightly closed in a cool, dry place. Protect from moisture and microbial contamination. Avoid temperature/humidity extremes that promote caking.
Shelf life: Follow labeled expiry. For this item, specific expiry and retest information are: Not specified for this item; refer to CoA/Spec Sheet.
Reconstitution
Water: Use Type I/II purified water. Typical use concentration is 25–30 g/L (follow label for this item).
Sterilization: Autoclave at 121 °C for 15 minutes. Cool to 45–50 °C before adding heat-labile supplements.
Storage after preparation: Un-supplemented, sterile broth can typically be stored 2–8 °C for up to several weeks if sterility is maintained; supplemented media (e.g., with blood/serum) should be used promptly (usually within 24–72 h) per internal SOPs. Always label with preparation date, lot, and supplements.
Freeze–thaw: Not recommended for prepared media; repeated freezing may precipitate components and impair performance.
Note
For any lot-specific directions (grams per liter, target pH, growth-promotion criteria), consult the CoA/Spec Sheet for this item.
Structure and Identity
Item-specific (from Product Data)
Product: Brucella Broth (SKU: B1528276)
Grade: BioReagent
CAS: Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES / InChIKey: Not applicable (complex, undefined mixture of biogenic components).
General description (literature)
Brucella Broth is a complex, dehydrated, nutrient medium composed of enzymatic digests (e.g., casein and animal tissue peptones), yeast extract, carbohydrate (typically dextrose), and mineral salts (e.g., NaCl; some formulations contain sulfite or phosphate for redox/buffering control).
Structural features: As a microbiological medium, it is not a single molecule but a heterogeneous mixture of peptides, amino acids, vitamins, nucleotides, minerals, and carbohydrates. There is no defined 2D structure or stereochemistry.
2D “structure” in words
A powdered blend of multiple organic and inorganic constituents. Upon dissolution in water, it furnishes a rich nutrient environment supporting the growth of fastidious microorganisms, notably Brucella spp., and (with supplements) other demanding anaerobes and microaerophiles.
Synthetic Utility
Not applicable
Brucella Broth is not a chemical reagent for synthesis and has no conventional role in organic or inorganic synthetic transformations.
Related laboratory utility
As a complex nutrient matrix, it can be used to produce microbial biomass for downstream biotransformations or enzyme production; however, reaction chemistry per se is outside this product’s intended scope.
For defined biochemical reactions or fermentations requiring precise substrates, consider chemically defined media where stoichiometry and buffering are controlled.
Target Specificity
Not applicable
This product is not an antibody, probe, or affinity reagent. It has no antigen/epitope specificity, clone, isotype, or species reactivity.
Use-context note
While named for Brucella spp., the broth itself is non-selective unless supplemented; its “specificity” derives from culture conditions and additives, not inherent binding properties.
Besoin d'aide pour choisir la qualité ?
Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.
Nous utilisons des cookies pour garantir le bon fonctionnement du site et, lorsque cela est autorisé, pour améliorer votre expérience. Vous pouvez gérer vos préférences à tout moment dans les Paramètres. Pour en savoir plus, consultez notre Politique relative aux cookies.
Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?
Me rappeler plus tard
Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.