Chapman Agar Medium - BioReagent

Cat. No.: C1528505
DISPONIBLE À COMMANDE
QUALITÉ & PURETÉ BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Taille
Allemagne (EU)
USA*
Prix
Qté
250g
C1528505-250g
Sur commande · 8–12 semaines
121,40€
Enter a quantity for the sizes you want to add.

Vue d’ensemble

For isolation and cultivation of Staphylococcus aureus

Spécifications

Spécifications et pureté
BioReagent
Conditions de stockage de stockage
Room temperature
Expédié en
Normal
Grade
BioReagent
Product Line
Produits biologiques

Données avancées

Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculateurs de solution
Avis

Avis des clients

Application Protocols

The following protocol is provided as a general, literature-based guide for Chapman-type agar media. It is not item-specific. Always follow your lab’s SOPs and the product CoA/Spec Sheet if provided.

A. Plate preparation (literature):

  1. Calculate medium quantity per liter (typical mannitol-salt agar formulations use ~100–115 g/L; a common value is 111 g/L — literature). 2) Disperse in purified water with stirring; heat to boiling to dissolve completely. 3) Autoclave at 121°C for ~15 min. 4) Cool to 50–55°C; if using heat-labile supplements, add aseptically. 5) Pour 20–25 mL into sterile 90-mm plates; allow to solidify and surface-dry.

B. Inoculation and incubation (literature):

  • Streak or spread sample/serial dilutions. Incubate inverted at 30–37°C for 24–48 h. Record colony morphology and color change around colonies.

C. Controls (literature suggestions):

  • Positive fermentation: Staphylococcus aureus (e.g., ATCC 25923).
  • Growth/no fermentation: Staphylococcus epidermidis (e.g., ATCC 12228).
  • Inhibition control: Escherichia coli (e.g., ATCC 25922).

D. Interpretation (literature):

  • Yellow zones/colonies: presumptive mannitol fermenters (often S. aureus).
  • Pink/red colonies/no halo: non-fermenting staphylococci.
  • No growth or scant growth: likely inhibited organisms.

E. Follow-up: Confirm presumptive IDs with orthogonal tests (e.g., catalase, coagulase, MALDI-TOF, biochemical panels).

Item-specific preparation mass, final pH, and supplement details are Not specified for this item.

Biological Roles

While not a biomolecule, Chapman Agar Medium exerts defined biological selection and differentiation effects (literature):

  • Selective pressure: High NaCl concentration (typical of Chapman-type media) inhibits non-halotolerant bacteria while permitting growth of staphylococci, which are salt-tolerant. This enriches for Staphylococcus spp. in mixed samples.
  • Differential mechanism: Inclusion of a fermentable carbohydrate (e.g., mannitol) with a pH indicator enables visualization of acid production. Mannitol-positive organisms (commonly Staphylococcus aureus) produce acid that shifts the indicator to yellow around colonies. Mannitol-negative staphylococci (e.g., Staphylococcus epidermidis) generally form colonies without yellow zones, leaving the medium’s red/pink background unchanged (phenol red systems).
  • Colony morphology: Staphylococci typically form round, convex colonies; pigmentation can range from white to golden depending on strain and conditions. Halo/medium color aids presumptive identification but is not confirmatory.
  • Ecosystem context: Useful for analyzing skin, food-contact, and environmental samples where staphylococci may be present. The salt and nutrient composition also suppresses many Gram-negative rods and fastidious organisms.

Caveats (literature):

  • Some non-staphylococcal halotolerant organisms may grow; always perform confirmatory tests (e.g., catalase, coagulase, biochemical panels, MALDI-TOF).
  • Indicator response depends on incubation time, temperature, and plate dryness; over-incubation can cause color diffusion or reversion.

Item-specific biological performance characteristics are Not specified for this item; consult the CoA/Spec Sheet for growth-promotion data if required.

Buffer Applications

Not typically applicable. Chapman Agar Medium is a complex, selective/differential microbiological growth medium, not a defined buffer system. For pH-control needs, use dedicated buffer reagents; for growth and differentiation of staphylococci, refer instead to the Application Protocols and Biological Roles sections.

Green Alternatives

Greener practice with culture media focuses on reducing waste, energy use, and hazardous inputs rather than swapping the medium for a different chemical.

Key considerations (literature/best practice):

  • Prefer bulk dehydrated media reconstituted on demand over single-use, pre-poured plates when appropriate to reduce packaging waste and cold-chain transport.
  • Optimize autoclave loads and scheduling to minimize energy/water consumption; validate shortest effective cycles.
  • Use reusable glassware (media bottles, flasks) when biosafety and workflow permit.
  • Prepare plate volumes precisely to avoid overpouring and subsequent disposal of unused agar.
  • Consolidate incubations and turn off incubators when not in use; employ calibrated devices for efficient temperature control.
  • Source agar from suppliers supporting sustainable seaweed harvesting (where available/documented).

Comparison (general):

Option | Environmental aspect | Trade-offs --- | --- | --- Bulk dehydrated medium (this item) | Lower packaging waste; ambient shipping | Requires autoclaving/energy; operator time Pre-poured plates | Saves lab time; consistent fill | More packaging; often refrigerated shipping/storage Ready-to-use broths | Minimal prep | Single-use plastics; higher transport volume

Waste minimization:

  • Autoclave and drain biological load before discarding agar to reduce biohazard volume.
  • Segregate recyclable cardboard from secondary packaging.

Note: Composition-specific “green” substitutions (e.g., alternative indicators) are formulation-dependent and not specified for this item.

Pharmaceutical Uses

No therapeutic or clinical claims are made. For research/lab use only (Product Data).

Literature/industry context (non-clinical):

  • Chapman-type selective/differential media are used in microbiological quality control workflows to detect or enumerate staphylococci in non-sterile products, raw materials, cosmetic/food matrices, and environmental monitoring programs. Specific compendial adoption, if any, depends on the governing method (e.g., pharmacopoeial or ISO/USP chapters) and laboratory SOPs; this item’s compendial status is Not specified for this item; refer to CoA/Spec Sheet.
  • Role in manufacturing support: Provides a selective plating medium for in-process checks, hygiene surveillance (e.g., contact plates/swabs), and method development/validation studies.
  • Formulation/excipient relevance: None; this is not used as a pharmaceutical excipient.

Practical considerations (literature):

  • Validate medium performance with appropriate positive/negative control strains and, where applicable, perform matrix suitability/recovery studies.
  • Record lot numbers and retain CoAs for traceability in GMP-adjacent environments. Use quarantine/release procedures based on growth-promotion testing when required.

Note: Regulatory acceptance and exact test methods must follow your organization’s validated SOPs. This listing provides general context only.

Physical Properties

As a dehydrated complex medium, discrete single-compound physicochemical constants do not apply. The following properties summarize typical behaviors of Chapman-type agar media; use as general guidance only.

Item-specific data:

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula / weight: Not applicable (mixture).

General/literature properties for Chapman-type (Mannitol Salt-type) agar media:

  • Physical state (dehydrated): Free-flowing powder; color varies with dye content.
  • Solubility: Readily disperses in water; complete dissolution upon heating to boiling (literature).
  • Gel behavior (due to agar): Melting ~85–95°C; gelation ~32–40°C (literature for agar).
  • Final medium pH: Often formulated near pH ~7.4 at 25°C after sterilization (literature; exact value is formulation-dependent and not specified for this item).
  • Density/bulk density (powder): Formulation-dependent; Not specified for this item; refer to CoA/Spec Sheet.
  • Refractive index, logP, pKa: Not applicable to mixtures.

Practical notes (literature):

  • Dissolution is facilitated by gradual heating with agitation; avoid scorching dyes/peptones.
  • Clear-to-slightly opalescent liquefied medium becomes a firm gel on cooling below ~45–50°C; pour plates around 50–55°C to minimize condensation and protect heat-labile indicators.
  • Ionic strength is high (due to elevated NaCl in Chapman-type media), a key determinant of selectivity; exact NaCl content is formulation-specific and not specified for this item.
Quality and Grades
  • Item grade (Product Data): BioReagent

What BioReagent grade typically implies (general guidance):

  • Suitable for laboratory research applications, including microbiology and molecular biology workflows where consistent performance is required.
  • Emphasis on raw material control and manufacturing practices to minimize lot-to-lot variability. Typical QC may include appearance, solubility, pH of prepared medium, and growth promotion/inhibition testing with representative strains (e.g., Staphylococcus aureus growth/fermentation; inhibition of non-halotolerant organisms) — these are literature expectations and not item-specific certifications.

Selectivity/differential performance (literature context):

  • Chapman-type media characteristically use elevated NaCl for selectivity and a carbohydrate with a pH indicator for differential readout. Lot performance is commonly verified by testing designated ATCC strains and comparing to acceptance criteria (e.g., colony morphology, color change). Exact strains and criteria for this item are Not specified for this item; refer to CoA/Spec Sheet.

Stabilizers/antimicrobials:

  • Some media incorporate inhibitors (e.g., dyes) or supplemental selective agents. Presence/absence and levels are Not specified for this item; refer to CoA/Spec Sheet.

Documentation and traceability:

  • For method validation or regulated testing, obtain the CoA/Spec Sheet for this specific lot to confirm composition, preparation instructions, pH targets, growth-promotion results, and any pharmacopeial alignment (if applicable).
Reaction and Applications

Chemical reaction use: Not applicable. Chapman Agar Medium is not a reagent for organic synthesis or analytical chemical reactions.

Laboratory applications (literature/general):

  • Selective isolation of staphylococci from mixed samples (environmental, food, cosmetic, or other research sources) leveraging high-salt tolerance.
  • Differentiation by carbohydrate fermentation: mannitol fermentation (in Chapman-type media) produces acid, shifting the indicator dye; mannitol-positive colonies appear with a surrounding yellow zone against a red/pink background (phenol red systems; literature).
  • Enumeration and presumptive identification in QA/QC workflows, with confirmatory tests (e.g., coagulase, catalase, MALDI-TOF) performed subsequently.
  • Morphology assessment: pigmentation and colony form can aid downstream selection.

Practical tips (literature):

  • Dry plates before use to prevent colony spread and ambiguous halos; invert during incubation to reduce condensation.
  • Include a positive control (e.g., a known Staphylococcus aureus strain) and a negative/inhibition control (e.g., Escherichia coli) in each plate lot.
  • Incubate at temperatures appropriate to the target organism (commonly 30–37°C for staphylococci) and read plates at 24 and 48 hours.

For method-critical work, follow your internal SOP or compendial method. Item-specific instructions and performance claims are Not specified for this item; refer to CoA/Spec Sheet.

Reaction Conditions

Chemical reaction conditions are not applicable. The following are preparation/incubation conditions relevant to the use of Chapman-type agar media (literature/general guidance; not item-specific specifications):

  • Reconstitution: Disperse the dehydrated powder into purified water with stirring; heat to dissolve completely.
  • Sterilization: Autoclave at 121°C for ~15 minutes (gravity or liquid cycle, per your equipment validation). Some selective supplements, if used, may be heat-labile and should be sterile-filtered and added after cooling to ~50–55°C.
  • Plate pouring: Cool the sterile, liquefied medium to ~50–55°C to minimize condensation and protect indicators, then pour 20–25 mL per standard 90-mm plate (or per your SOP).
  • Drying: Allow plates to set and surface-dry (e.g., in a biosafety cabinet) before storage/use.
  • Incubation of inoculated plates: Commonly 30–37°C for 24–48 h for staphylococci; record at both 24 h and 48 h as needed for differential color development.
  • Reading: Look for colony growth and indicator color change (yellow halo for mannitol fermenters on phenol red systems; literature).

Item-specific preparation quantities, final pH targets, and supplements are Not specified for this item; refer to CoA/Spec Sheet. Always validate conditions within your laboratory’s SOPs.

Safety and Handling

Safety information specific to this catalog item (GHS signal word, H-statements, pictograms) is not provided here. Always consult the product’s SDS for authoritative guidance.

Item-specific from Product Data:

  • Storage: Room temperature
  • Shipping: Normal

General safety guidance for dehydrated microbiological media (literature/standard practice):

  • Likely hazards: Nuisance dust; mechanical eye/respiratory irritation. Some indicator dyes and high-salt content may cause mild skin/eye irritation. Avoid inhalation of dusts and contact with eyes/skin.
  • PPE: Laboratory coat, safety glasses, appropriate gloves; use a dust mask/respirator if airborne dust cannot be controlled.
  • Engineering controls: Handle powders in a clean, dry area with local exhaust or a fume hood to minimize dust.
  • Incompatibilities: Strong oxidizers and strong acids/bases may degrade organic components/dyes. Avoid moisture uptake; keep container tightly closed to maintain performance.
  • Microbiological biosafety: Once reconstituted and inoculated, plates/broths become biohazardous. Follow institutional biosafety policies for handling BSL-appropriate organisms. Decontaminate used media and disposables by autoclaving (e.g., 121°C for ≥15 min) before disposal.
  • Thermal hazards: Exercise caution when boiling media and when autoclaving; release pressure slowly; use heat-resistant gloves.
  • First aid (overview): If inhaled, move to fresh air. If on skin or in eyes, rinse with water for several minutes; remove contaminated clothing. If ingested, rinse mouth and seek medical advice. Always defer to SDS for specific instructions.

Waste: Dispose according to local regulations; segregate biological from chemical waste; autoclave biological waste prior to disposal.

Solvent Selection

This product is a dehydrated culture medium intended to be reconstituted with water; organic solvent selection is not applicable.

  • Primary solvent: Purified/distilled/deionized water (literature). Water quality should meet your lab’s microbiology standards (e.g., ASTM Type II or better). Resistivity, TOC, and endotoxin levels may influence sensitive workflows.
  • Reconstitution approach (literature): Disperse the medium into cold/lukewarm water with stirring, then heat to near-boiling to fully dissolve. Do not autoclave until fully liquefied. Avoid localized overheating of indicator dyes.
  • Sterilization (literature): Autoclave (e.g., 121°C, ~15 min) if required by the formulation; some selective supplements are heat-labile and are aseptically added post-sterilization at ~50–55°C. For this item, any supplements and sterilization specifics are Not specified for this item; refer to CoA/Spec Sheet.
  • pH adjustment: Only if directed by the specification; indiscriminate pH adjustment can compromise selectivity/differentiation. Target pH for Chapman-type media is typically near neutral (literature), but exact values are formulation-specific.
  • When to choose water grades:
    • Type II DI for routine plate pouring.
    • Type I DI for sensitive QA/QC environments.
    • Sterile water for broth/overlay preparations performed aseptically.

Note: If using pressure cookers or non-validated sterilizers, confirm sterility with biological indicators and verify medium performance with positive/negative controls.

Storage and Reconstitution

Item-specific (from Product Data):

  • Storage conditions: Room temperature (keep container tightly closed, dry, and protected from humidity).
  • Shipped in: Normal
  • Research use: For research use only

General guidance for dehydrated media (literature; not item-specific specifications):

  • Shelf life: Use by the labeled expiry date; avoid repeated opening in humid environments to prevent clumping and performance drift.
  • Reconstitution: Disperse the dehydrated powder into purified water with stirring; heat to dissolve. Do not adjust pH unless directed by specification. Remove from heat once clear to prevent caramelization of sugars or dye degradation.
  • Sterilization: Autoclave at ~121°C for ~15 min unless otherwise directed. Some selective supplements may be filter-sterilized and added aseptically after cooling to 50–55°C.
  • Plate storage: Prepared plates can typically be stored 2–8°C, sealed/inverted, protected from light, for up to 2–4 weeks (literature). Allow plates to return to room temperature and dry the surface before use.
  • Freeze–thaw: Do not freeze prepared agar plates; freezing disrupts the gel matrix.
  • Light sensitivity: Indicator dyes may be light-sensitive; minimize exposure.

Not specified for this item; refer to CoA/Spec Sheet for: final pH, exact mass per liter, presence of supplements/inhibitors, and any special storage restrictions.

Structure and Identity

Chapman Agar Medium is a dehydrated, complex microbiological culture medium (selective/differential) traditionally based on Chapman’s formulation for the isolation and differentiation of staphylococci. It is a mixture of organic/inorganic components and does not correspond to a single chemical structure.

  • Item type: Microbiological culture medium (dehydrated powder)
  • Composition nature: Complex (peptones/tryptones, salts, carbohydrate(s), indicator dye(s), agar) — exact composition for this catalog item is not specified here.
  • Structural features: Not applicable to mixtures; the functional performance derives from high ionic strength (salt), carbohydrate fermentation, pH indicator response, and agar gel matrix.
  • Molecular formula: Not applicable to a mixture.
  • Molecular weight: Not applicable to a mixture.
  • Stereochemistry: Not applicable.
  • 2D structure (descriptive): As a blend of multiple components, there is no single 2D structure; the functional constituents are uniformly dispersed upon dissolution and solidify within an agar network on cooling.

Identifiers (this item):

  • SKU: C1528505
  • Product name: Chapman Agar Medium
  • Grade/Purity: BioReagent (Product Data)
  • Storage conditions: Room temperature (Product Data)
  • Shipped in: Normal (Product Data)
  • CAS, CID, InChIKey, SMILES: Not applicable/Not assigned for complex media

Notes:

  • Item-specific composition, if needed for regulatory or validation purposes, should be taken from the product CoA/Spec Sheet. This listing describes the functional identity as a Chapman-type selective/differential agar medium (literature).
Synthetic Utility

Not applicable. Chapman Agar Medium is a complex biological culture medium and is not used as a reagent or building block in chemical synthesis, catalysis, or materials chemistry. For laboratory use, see Biological Roles and Application Protocols for microbiological workflows.

Target Specificity

This section is typically used for biomolecular affinity reagents; however, for a selective culture medium, “specificity” refers to microbial selectivity (literature):

  • Intended target group: Staphylococcus spp. (salt-tolerant Gram-positive cocci).
  • Selective principle: Elevated NaCl suppresses many non-halotolerant organisms while permitting staphylococcal growth.
  • Differential principle: Carbohydrate fermentation (e.g., mannitol) visualized by a pH indicator (commonly phenol red in Chapman-type media) yields yellow zones around fermenters (e.g., many S. aureus strains) and no yellowing for non-fermenters (e.g., S. epidermidis), enabling presumptive differentiation.
  • Non-target effects: Some halotolerant non-staphylococcal species may grow; Gram-negative rods are often inhibited but not universally.
  • Controls (recommended, literature):
    • Positive growth/fermentation: Staphylococcus aureus (e.g., ATCC 25923) — good growth with yellow halo.
    • Growth without fermentation: Staphylococcus epidermidis (e.g., ATCC 12228) — growth, no halo.
    • Inhibition control: Escherichia coli (e.g., ATCC 25922) — inhibited or markedly reduced growth.

Item-specific strain performance claims and acceptance criteria are Not specified for this item; consult CoA/Spec Sheet or perform in-house growth-promotion tests per SOP.

Besoin d'aide pour choisir la qualité ?

Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.

Voir le guide des qualités BioReagent →

Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?

Me rappeler plus tard

Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.

Oups ! Les notifications sont désactivées.