CTAB Extraction Buffer - BioReagent,Suitable for molecular biology

Cat. No.: C1518318
DISPONIBLE À COMMANDE
QUALITÉ & PURETÉ BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Suitable for molecular biology ? Molecular-biology grade — free of nucleases and contaminants that degrade DNA/RNA. Use in cloning, PCR, and nucleic-acid work needing clean reagents.
Synonyms
CTAB Lysis Buffer|CTAB DNA Extraction Buffer|CTAB Plant Genomic DNA Extraction Buffer
Storage
Protected from light,Room temperature
Shipped In
Normal
Application
DNA Extraction
★
Taille
Allemagne (EU)
USA*
Prix
Qté
500ml
C1518318-500ml
—
2 En stock
51,98€
Enter a quantity for the sizes you want to add.

Vue d’ensemble

Common methods for extracting genomic DNA from plant tissues include cesium chloride centrifugation, CTAB extraction, and others. The CTAB extraction method is a classic approach for plant DNA extraction and can be used for various types of plant samples. This method yields a high amount of DNA, and although the purity is generally moderate, it is sufficient for most molecular biology experiments.


The active component of the CTAB Extraction Buffer is CTAB (hexadecyltrimethylammonium bromide). Before use, 2-ME must be added to enhance the effectiveness and stability of the reagent. This product is intended for scientific research only and is not suitable for clinical diagnosis or other purposes.


C1518318
Component
500 mLStorage
C1518318A
CTAB Extraction Buffer
500 mL
RT.
C1518318B
2-ME
10 mL
RT. Store in the dark.


Materials to Prepare

  • Laboratory equipment: Liquid nitrogen, mortar or homogenizer, centrifuge tubes, incubator or water bath, centrifuge
  • Reagents: Chloroform/isoamyl alcohol (24:1), 75% ethanol


Procedure (For Reference Only)

  1. Take an appropriate amount of 5 mL of CTAB Extraction Buffer and mix it with 2-ME in a ratio of 50:1 (CTAB Extraction Buffer:2-ME). Place the mixture in a 15 mL or other appropriate centrifuge tube and preheat it to 60°C. If necessary, add 1–5 μg/mL of RNase A to remove residual RNA.

  2. Weigh 1–1.5 g or an appropriate amount of fresh plant tissue or leaves. Use pre-chilled liquid nitrogen or dry ice to cool the mortar or homogenizer, and grind the plant tissue into a fine powder. Then, transfer the frozen tissue into the centrifuge tube.

  3. Add the preheated CTAB Extraction Buffer to the powdered tissue at a ratio of 4–5 mL/g. Mix thoroughly and incubate at 65°C for 15–60 min, mixing occasionally during incubation.

  4. Add an equal volume of chloroform/isoamyl alcohol (24:1). Invert the centrifuge tube to mix thoroughly. Centrifuge at 8000g for 5–10 min and recover the upper aqueous phase (supernatant containing the desired DNA).

  5. Transfer the supernatant to a new centrifuge tube. Add 1/2 to 2/3 volumes of pre-chilled isopropanol, mix gently, and let it stand at room temperature to allow nucleic acid precipitation at the bottom of the tube. If no precipitate is observed, let it stand at room temperature for several hours or overnight.

  6. Centrifuge at 2000g for 2 min and carefully discard the supernatant.

  7. Add 75% ethanol to the loose DNA pellet, let it stand at room temperature for 20 min, and centrifuge at 4000g for 10 min. Carefully discard the supernatant.

  8. Air-dry the DNA naturally and dissolve it in an appropriate amount of deionized water or TE buffer. If necessary, add 1–5 μg/mL of RNase A to remove residual RNA. Finally, store at -20°C.


Precautions

  1. If the reagent is used in small quantities each time, it is recommended to aliquot it appropriately to avoid repeated freeze-thaw cycles or contamination.

  2. To ensure your safety and health, wear laboratory gloves and a lab coat during operation.

  3. Once opened, use the reagent as soon as possible to avoid compromising subsequent experimental results.

Spécifications

Synonymes
CTAB Lysis Buffer | CTAB DNA Extraction Buffer | CTAB Plant Genomic DNA Extraction Buffer
Spécifications et pureté
BioReagent,Suitable for molecular biology
Stabilité et stockage
Store at room temperature long term (24 months). Store in the dark.
Conditions de stockage de stockage
Protected from light,Room temperature
Expédié en
Normal
Grade
BioReagent, Suitable for molecular biology
Product Line
Produits biologiques

Données avancées

Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

2 results found

Lot NumberCertificate TypeDateArticle
ZJ26F0636938ZJ26F0636938Certificate of AnalysisJul 01, 2026 C1518318
ZJ26F0434115ZJ26F0434115Certificate of AnalysisApr 10, 2026 C1518318
Propriétés chimiques et physiques
SensibilitéLight-sensitive
FAQ et articles
Calculateurs de solution
Avis

Avis des clients

Foire aux questions

What does Suitable for molecular biology mean?
Suitable for molecular biology indicates that the product has been processed and tested for molecular biology and proteomics. Typical specifications include low or undetectable nuclease/protease activity, low endotoxin, controlled microbial limits and high lot-to-lot reproducibility.
What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at room temperature, protected from light. The material is light-sensitive — keep it in its original opaque or amber container.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Besoin d'aide pour choisir la qualité ?

Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.

Voir le guide des qualités Suitable for molecular biology → Voir le guide des qualités BioReagent →

Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?

Me rappeler plus tard

Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.

Oups ! Les notifications sont désactivées.