Eleuthoside B - ≥95%(LC/MS-ELSD) , CAS No.194851-33-7

CAS: 194851-33-7 Cat. No.: E463807 Poids moléculaire: 568.52
DISPONIBLE À COMMANDE
Synonyms
Eleutherol-4-O-β-D-gentiobioside
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
Taille
Allemagne (EU)
USA*
Prix
Qté
1mg
E463807-1mg
Sur commande · 8–12 semaines

724,48€

845,96€
Enregistrer 121,48 € (14.36%)
Enter a quantity for the sizes you want to add.

Vue d’ensemble

Description

Natural product derived from plant source.Eleuthoside B is a cytotoxic marine natural product. It is an aromatic diterpenoid glycoside isolated from the soft coralEleutherobia aureaand bulbs ofEleutherine palmifolia(Iridaceae).}

Spécifications

Synonymes
Eleutherol-4-O-β-D-gentiobioside
Spécifications et pureté
≥95%(LC/MS-ELSD)
Conditions de stockage de stockage
Store at -20°C
Expédié en
Ice chest + Ice pads
Ce produit nécessite l'expédition en chaîne froide. Les services terrestres et autres services économiques ne sont pas disponibles.
Noms et identifiants
SMILES
COc1cccc2cc3C(=O)O[C@H](C)c3c(O[C@@H]4O[C@H](CO[C@@H]5O[C@H](CO)[C@@H](O)[C@H](O)[C@H]5O)[C@@H](O)[C@H](O)[C@H]4O)c12
InChIKey
PAEOIXITAYMQRF-ZAEQARNUSA-N
InChI
1S/C26H32O14/c1-9-15-11(24(34)37-9)6-10-4-3-5-12(35-2)16(10)23(15)40-26-22(33)20(31)18(29)14(39-26)8-36-25-21(32)19(30)17(28)13(7-27)38-25/h3-6,9,13-14,17-22,25-33H,7-8H2,1-2H3/t9-,13-,14-,17-,18-,19+,20+,21-,22-,25-,26+/m1/s1
Poids moléculaire
568.52

Données avancées

Structure 3D
Modèle de structure chimique interactif





Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Propriétés chimiques et physiques
Point d'éclair (°F)Not applicable
Point d'éclair (°C)Not applicable
Sécurité et dangers (GHS)
RIDADR
NONH for all modes of transport
Calculateurs de solution
Avis

Avis des clients

Application Protocols

No validated bioassay or immunoassay protocols are provided for this specific catalog item. Typical research uses include:

  • Preparation of analytical stock solutions: dissolve at 10–50 mg/mL in DMSO or methanol; store aliquots at −20°C. Dilute into aqueous buffers immediately before use.
  • HPLC/LC–MS calibration: prepare serial dilutions in 50:50 MeOH:H2O (with 0.1% formic acid if using positive ESI). Use amber vials and minimize freeze–thaw cycles.
  • Enzymatic hydrolysis study (general): incubate 0.1–1 mM substrate in pH 5.5 citrate buffer with β-glucosidase at 25–37°C; sample periodically and quench with MeOH for LC analysis.

Item-specific tested applications, recommended dilutions, and positive controls: Not specified for this item; refer to CoA/Spec Sheet.

Biological Roles

General literature context (no medical claims):

  • Chemical class: phenylpropanoid O-β-D-glucoside, commonly reported as syringin in plants of the Araliaceae and others.
  • Biosynthetic origin: derived from the phenylpropanoid pathway; glycosylation of sinapyl alcohol increases polarity, storage stability, and transport in plant tissues.
  • Putative roles in plants: glycosides of phenylpropanoids often function in storage, detoxification, transport, and modulation of oxidative stress responses. They can serve as precursors to lignin monomers (via aglycone release) and may participate in plant–herbivore or pathogen interactions (literature).
  • Metabolism: β-glucosidases can hydrolyze the glycosidic bond to release the aglycone and glucose. In biological matrices, stability depends on pH, enzyme presence, and temperature.
  • Analytical biomarker: frequently used as a chemotaxonomic marker and as a quality-control analyte for botanical materials and extracts.

Experimental considerations:

  • For in vitro studies, prepare fresh solutions in aqueous buffer immediately before use; prolonged incubation may lead to enzymatic or non-enzymatic hydrolysis.
  • In mass spectrometry, expect characteristic fragments corresponding to neutral losses of hexose (−162 Da) and subsequent rearrangements in positive ESI mode (literature).
Buffer Applications

This product is not a buffering reagent. However, it may be dissolved in or diluted with common laboratory buffers for assays and analytics.

Practical guidance (general):

  • Preferred pH range: near-neutral buffers (pH 6.5–7.5; e.g., phosphate, HEPES) to limit glycosidic hydrolysis. Avoid strong acidic or basic buffers for extended periods.
  • Solubilization: pre-dissolve in a small volume of methanol or DMSO, then add to buffer with vigorous mixing. Typical final organic content in assays is kept ≤1–2% v/v to maintain biological compatibility.
  • Filtration: use 0.22 µm syringe filters (RC, PES, or PTFE depending on solvent composition) to clarify solutions without heat exposure.
  • Storage: prepare single-use aliquots to avoid repeated freeze–thaw; discard buffer solutions if precipitation, discoloration, or pH drift is observed.
Green Alternatives

Context: Eleuthoside B is a solid analyte/research standard, not a process solvent. Greenness considerations focus on solvent choices and sourcing rather than substituting the molecule itself.

Greener handling strategies (general):

  • Prefer water and bio-based ethanol for dissolution when feasible; use small percentages of DMSO as a co-solvent to achieve target concentrations.
  • Minimize chlorinated solvents (e.g., CH2Cl2) in workups/purifications; reverse-phase aqueous chromatography often suffices.
  • For derivatization or protection chemistry, choose greener reagents/solvents (ethyl acetate, CPME) and catalytic methods when possible.

Comparison of common solvent options (general):

  • Water: best EHS profile; may need warming or co-solvent due to limited direct solubility at RT.
  • Ethanol (bio-derived): good solvency, low toxicity, easy removal.
  • Methanol: effective but more toxic than ethanol; use in closed systems with recovery.
  • DMSO: excellent solvency; low volatility reduces emissions but complicates waste streams.

Sourcing and waste:

  • Consider purchasing only the quantity needed to reduce long-term storage and potential degradation waste.
  • Segregate aqueous organic waste (MeOH/H2O, ACN/H2O) for proper recycling or disposal.

Process intensification (analytical workflows):

  • Use micro-scale sample prep (SPE, micro-LC) to cut solvent consumption.
  • Validate shorter LC gradients and higher-efficiency columns to reduce mobile-phase use without compromising resolution.
Pharmaceutical Uses

No therapeutic or clinical claims are made. Eleuthoside B is supplied strictly for research use.

Relevant non-clinical, formulation-related contexts (general):

  • Reference standard: used in quality control and standardization studies of botanical raw materials and finished products (e.g., quantification in Eleutherococcus extracts) using HPLC/LC–MS.
  • Excipient status: not recognized as a standard excipient; instead, it is a small-molecule analyte/marker.
  • Method development: supports validation of analytical methods (specificity, linearity, accuracy, precision, robustness) for plant-derived product testing in compliance with compendial or regulatory guidance.
  • Stability-indicating methods: serves to establish degradation pathways (acid/base hydrolysis, oxidative stress) and to optimize packaging/storage of plant matrices.

If formulating for research studies:

  • Use aqueous ethanol or buffered aqueous solutions for short-term preparations. Avoid extremes of pH and elevated temperature. Document solvent composition precisely for reproducibility.

Item-specific pharmacopeial status, residual solvent limits, and impurity profiles: Not specified for this item; refer to CoA/Spec Sheet.

Physical Properties

Item-specific specifications:

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • Other specs (mp, bp, density, UV cutoff, water/peroxide/metal content): Not specified for this item; refer to CoA/Spec Sheet.

Literature/general properties for syringin (commonly reported identity for eleuthoside B; for reference only):

  • Typical physical form: off-white to pale solid (phenylpropanoid O-glycoside).
  • Solubility: high solubility in polar protic/aqueous solvents (water, methanol, ethanol), sparingly soluble in nonpolar solvents (e.g., hexane, toluene). Aqueous solubility can improve with gentle warming or pH adjustment away from extreme acidic/basic conditions to avoid hydrolysis.
  • Partitioning: expected low logP due to sugar moiety; behaves as a polar neutral compound with multiple H-bond donors/acceptors.
  • Thermal behavior: glycosidic bonds may hydrolyze upon prolonged heating in acid/base; avoid strong acid/base and elevated temperatures in aqueous media during handling.
  • Spectroscopy: strong UV absorbance in the 260–330 nm region typical of substituted phenylpropanoids; multiple diagnostic 1H/13C NMR signals for aromatic methoxy groups, anomeric proton (~4.5–5.5 ppm), and sugar resonances (literature).

Practical handling notes:

  • Prepare analytical stock solutions in methanol, ethanol, or DMSO; for bioassays, dilute into buffered aqueous media immediately before use to minimize hydrolysis.
  • Filter sterilization (0.22 µm PTFE/RC) is preferred over heat sterilization.
Quality and Grades

Item-specific grade/purity: Not specified for this item; refer to CoA/Spec Sheet.

How to interpret grades for this compound class (general guidance):

  • Analytical/reference grade: intended as a reference standard (e.g., for HPLC/LC–MS quantitation of plant extracts). Emphasis is on assay purity (by qNMR/HPLC), low related substances, and documented identity via orthogonal methods (NMR, HRMS), often with a detailed CoA.
  • Research grade: suitable for discovery chemistry and screening; typical documentation includes HPLC purity and basic spectroscopic identification.

UV profile and chromatography: For LC assay work, low-UV solvents (LC–MS-grade acetonitrile/water with 0.1% formic acid) facilitate detection in the phenylpropanoid UV band (approx. 260–330 nm, literature). If “HPLC grade” is listed on the CoA, it usually implies low baseline drift and minimal non-volatile residues.

Stabilizers: None are typically added for this class; if a stabilizer is present, it will be declared on the label/CoA and should be considered in quantitative analyses.

What is specific to this item:

  • Storage conditions are explicitly provided: Store at −20°C; shipped on cold packs (see Storage & Reconstitution). All other quality-defining parameters (assay, water, residual solvents, identity methods) are Not specified for this item; refer to CoA/Spec Sheet.
Reaction and Applications

Research applications (non-clinical):

  • Reference standard: frequently used as a marker compound in phytochemical profiling of Eleutherococcus and other species; suitable for method development and validation (HPLC/LC–MS, TLC), including calibration curve preparation and recovery studies.
  • Metabolomics: serves as a representative phenylpropanoid glycoside to benchmark extraction efficiency, ionization behavior (ESI+), and fragmentation pathways (losses of sugar, methoxy rearrangements; literature).
  • Stability studies: model substrate to study acid/base/enzymatic glycosidic hydrolysis, yielding the aglycone (sinapyl alcohol derivatives) and glucose; relevant to processing and storage of botanical matrices.

Chemical reactivity (general for O-aryl β-D-glucosides):

  • Glycosidic bond cleavage: susceptible to Bronsted acid catalysis (aqueous or organic) and glycosidase enzymes (β-glucosidases). Neutral, anhydrous conditions maximize stability.
  • Phenolic/allylic transformations: the aglycone supports O-methyl ether stability; demethylation (e.g., BBr3) transforms methoxy groups to phenols on the aglycone after deprotection. Allylic oxidation (e.g., with MnO2) or reduction/hydrogenation can be studied post-deglycosylation.
  • Derivatization for analytics: formation of per-acetates or silyl ethers enhances GC compatibility (after hydrolysis), while benzoate/acetate derivatization of sugar hydroxyls improves lipophilicity for certain separations.

Practical tips:

  • Avoid strong acid or base during purification; use RP-HPLC with volatile modifiers (formic acid, ammonium acetate).
  • For enzymatic studies, select specific β-glucosidases and monitor by LC–MS for aglycone release and sugar formation.
  • Maintain low temperatures and protect from light/air during sample prep to reduce oxidative artifacts.
Reaction Conditions

General conditions relevant to this compound class (phenolic O-β-D-glucosides; literature-based guidance):

  • Glycosidic hydrolysis (acidic): dilute mineral acids (e.g., 0.1–1 M HCl or TFA) in water or aqueous MeOH, 25–60°C, 0.5–6 h, monitored by HPLC/LC–MS. Milder conditions (pH 2–3) at ambient temperature reduce side reactions.
  • Enzymatic cleavage: β-glucosidase (e.g., almond β-glucosidase) in citrate/phosphate buffer, pH 5–6, 25–37°C, 1–24 h. Monitor for aglycone release; enzyme load and time depend on substrate/enzyme source.
  • Per-O-acetylation: Ac2O/pyridine or DMAP-catalyzed acylation in DCM/MeCN, 0–25°C, 1–3 h, providing peracetates amenable to further transformations and improved chromatographic behavior.
  • Demethylation of anisole motifs (post-deglycosylation): BBr3 (1–3 eq per OMe) in DCM at −78 to 0°C, 1–6 h; quench carefully. Alternative reagents (AlCl3/thiols) may be used depending on functional group tolerance.
  • Oxidation/reduction on the allylic chain: MnO2 (allylic oxidation) in DCM/EtOAc at RT; hydrogenation (H2, Pd/C, 1–3 bar) to saturate the C=C; or hydroboration–oxidation (BH3·THF then H2O2/NaOH) to convert the alkene to alcohols.

Chromatography and analytics:

  • RP-HPLC: C18, 5 µm, 4.6 × 150 mm; mobile phase water (0.1% FA)/acetonitrile gradient; detection 270–320 nm and MS. Retention increases with decreasing aqueous content.
  • TLC: silica gel; EtOAc:MeOH 9:1 to 7:3; visualize with anisaldehyde–H2SO4.

Note: The above are typical literature conditions for related substrates and should be optimized for your specific sample and objectives.

Safety and Handling

Regulatory/GHS information for this catalog item:

  • Signal word: Not specified for this item; refer to SDS.
  • H-statements: Not specified for this item; refer to SDS.
  • GHS classification and pictograms: Not specified for this item; refer to SDS.

General laboratory precautions (good practice for phenolic glycosides and analytical standards):

  • PPE: wear lab coat, safety glasses, and suitable gloves (nitrile). Avoid inhalation of dust and contact with skin/eyes. Handle powders in a chemical fume hood to minimize dust exposure.
  • Storage incompatibilities: avoid strong oxidizers, strong acids/bases (risk of glycosidic hydrolysis), and prolonged exposure to moisture. Protect from light to minimize potential oxidative degradation of phenylpropanoid moieties.
  • First-aid overview: in case of contact, rinse affected area with water for 15 minutes; remove contaminated clothing. If inhaled, move to fresh air. If ingested, rinse mouth and seek medical advice. Always follow your institution’s safety protocols.
  • Spill and disposal: collect spills with inert absorbent, avoid dust generation, and dispose of waste in accordance with local regulations and your institution’s hazardous waste procedures.
  • Stability considerations: aqueous solutions are best prepared fresh; extended storage of solutions may lead to hydrolysis or oxidation. Avoid heating in acidic/basic media.

Authoritative source: Consult the product-specific SDS for definitive hazard classification, exposure controls, and emergency measures.

Solvent Selection

Use-case driven selection (for weighing, stock preparation, analytics):

  • Polar protic solvents (preferred): water, methanol, ethanol. These efficiently solvate phenolic glycosides via H-bonding. For analytical stocks, methanol or 50:50 MeOH:H2O are common.
  • Polar aprotic solvents: DMSO is excellent for high-concentration stocks; DMF also dissolves well but is less favored for bioassays. Acetonitrile has moderate solubility; often used as a chromatographic mobile-phase component rather than a primary solvent.
  • Nonpolar solvents: poor solubility is expected; avoid unless part of a biphasic system with a polar co-solvent.

Miscibility and handling (literature-based, general):

  • Aqueous buffers: dissolve first in a small volume of MeOH or DMSO, then dilute into buffer with vigorous mixing to minimize local supersaturation. Maintain neutral pH to reduce hydrolysis.
  • Chromatography: reverse-phase LC (C18) with water–acetonitrile (0.1% formic acid) provides robust retention and peak shape. For NP TLC, use EtOAc/MeOH gradients and visualize with anisaldehyde/sulfuric spray.

Quick comparison (general):

  • DMSO: maximum solubility; compatible with small injection volumes in bioassays.
  • Methanol/ethanol: volatile, LC-friendly; easier to remove after preparative steps.
  • Water: greenest option; may require warming or co-solvent.

Tip: Prepare concentrated stocks in DMSO (e.g., 10–50 mg/mL), store at −20°C in aliquots, and thaw immediately before dilution to working concentrations.

Storage and Reconstitution

Item-specific handling (from Product Data):

  • Storage conditions: Store at −20°C.
  • Shipping: Shipped in an ice chest with ice pads to maintain a cold chain.
  • Research use only.

General best practices for phenolic glycoside standards:

  • Upon receipt: allow container to equilibrate to room temperature in a desiccator before opening to avoid condensation. If supplied as a solid, promptly subdivide into single-use aliquots under dry conditions.
  • Protection: store in airtight, light-protective containers (amber vials) with desiccant. Minimize headspace oxygen when feasible.
  • Reconstitution: dissolve in dry methanol, ethanol, or DMSO to prepare concentrated stocks (e.g., 10–50 mg/mL). For aqueous use, dilute the organic stock into buffer immediately before experiments. Avoid strong acid/base to reduce glycosidic hydrolysis.
  • Stability: aqueous solutions are short-lived; prepare fresh on the day of use. Monitor for discoloration or precipitation as indicators of degradation.
  • Freeze–thaw: avoid repeated cycles by aliquoting; thaw on ice and return unused portions to −20°C promptly.

Item-specific details such as exact solubility limits, stabilizers, and shelf-life: Not specified for this item; refer to CoA/Spec Sheet.

Structure and Identity

Item-specific identifiers (from Product Data):

  • CAS: 194851-33-7
  • InChIKey: 272128 (Not a standard InChIKey format; item-specific details Not specified for this item; refer to CoA/Spec Sheet.)
  • SMILES: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.

Literature context (for reference only; verify against the item’s CoA before use):

  • Eleuthoside B is widely reported in the natural-products literature as syringin (a phenylpropanoid β-D-glucoside of sinapyl alcohol). It features a 1,3,5-trisubstituted aromatic ring bearing two methoxy groups and one phenoxy substituent that is O-glycosylated with a β-D-glucopyranose. The aglycone carries a propenyl alcohol side chain (allylic primary alcohol). Stereochemistry resides at the sugar anomeric center (β-configuration) and the multiple chiral centers of D-glucopyranose.

2D structural description (general):

  • Aromatic core: 1,3,5-trisubstituted anisole-like ring (two OMe groups para to each other and phenoxy substituent).
  • Linkage: Phenolic oxygen forms a glycosidic bond to the anomeric carbon of β-D-glucose.
  • Side chain: A C3 propenyl chain terminated by a primary alcohol (allylic), conjugated to the aromatic ring via the benzylic position.

Notes:

  • Identity and exact stereochemical/analytical identifiers for this catalog item must be confirmed via the product’s CoA/SDS. The above literature description is provided to aid general understanding and planning only.
Synthetic Utility

From a synthetic chemistry perspective (general for phenylpropanoid β-D-glucosides):

  • Protecting-group chemistry: the sugar hydroxyls offer a platform for selective acylation (e.g., per-O-acetylation) facilitating purification and modification. The phenolic oxygen is masked as a glycoside, which can be leveraged to carry the aglycone through transformations that would otherwise affect a free phenol.
  • Glycosidic manipulation: acid-catalyzed hydrolysis or enzymatic β-glucosidase cleavage releases the aglycone (sinapyl alcohol derivative) for further elaboration (e.g., oxidation to aldehydes/acids, cross-coupling after appropriate activation).
  • Aromatic modifications: post-deglycosylation, demethylation of anisole motifs (BBr3, AlCl3/thiols) affords catechols/phenols; subsequent O-alkylation or O-acylation diversifies the scaffold. The allylic side chain enables oxidation (MnO2, SeO2), reduction (Pd/C H2), or olefin functionalization (epoxidation, hydroboration/oxidation) once the glycoside is removed or adequately protected.
  • Chemoenzymatic routes: transglycosylation using glycosyltransferases or glycosidases can install alternative sugars or anomeric configurations, offering access to libraries for SAR or analytical standards.

Retrosynthetic value:

  • As a naturally glycosylated handle, eleuthoside B can be a starting point to access sinapyl-based derivatives via selective bond disconnections (glycosidic bond, O-methyl ethers) under mild conditions.

Note: Reaction choices should be validated experimentally; maintain anhydrous/neutral conditions if preserving the glycosidic linkage is required.

Target Specificity

Not applicable. This product is a small molecule standard/compound, not an antibody, enzyme, or targeted biological reagent. No antigen/epitope, species reactivity, clone, or isotype information applies.

Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?

Me rappeler plus tard

Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.

Oups ! Les notifications sont désactivées.