Determine the necessary mass, volume, or concentration for preparing a solution.
ELISA wash buffer (10x) was developed as a high performance washing solution for use in all ELISA formats. The optimised formulation of pH stabilizers, salts and detergents increases the efficiency of washing stages during ELISA, leading to a reduction in background noise and an increased specific signal.
Instructions for Use:
1. Dilute the required volume with deionised water (1 part to 9 parts water) and mix.
2. Use at each ELISA wash step for a total of 2-4 washes. Fill each well with the diluted wash buffer (approximately 400ul), taking care not to submerge the plate as this can cross-contaminate the wells. The buffer may be dispensed manually or by an automated system.
3. Between washes, aspirate or dump the buffer. After the final wash blot the plate on paper towels to remove any excess liquid.
Find and download the COA for your product by matching the lot number on the packaging.
| Lot Number | Certificate Type | Date | Article |
|---|---|---|---|
| Certificate of Analysis | Jul 07, 2026 | E1372410 | |
| Certificate of Analysis | Jul 07, 2026 | E1372410 | |
| Certificate of Analysis | Jun 22, 2026 | E1372410 |
Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.
Voir le guide des qualités Sterile-filtered → Voir le guide des qualités BioReagent → Voir le guide des qualités for Protein analysis → Voir le guide des qualités for ELISA →