JYBL-Ⅳ Decalcifying Solution - BioReagent

Cat. No.: J1529417
DISPONIBLE À COMMANDE
QUALITÉ & PURETÉ BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
Application
855
★
Taille
Allemagne (EU)
USA*
Prix
Qté
500ml
J1529417-500ml
Sur commande · 8–12 semaines
43,30€
Enter a quantity for the sizes you want to add.

Vue d’ensemble

During tissue sectioning, some tissues contain bone or calcified foci. Calcified tissues are not suitable for direct paraffin embedding and sectioning, because the density difference between calcium and paraffin makes it difficult to obtain intact sections. For calcified tissues, it is best to fix first and then decalcify, or perform both simultaneously, followed by downstream procedures such as dehydration, clearing, paraffin infiltration, embedding, and sectioning. Many reagents are available for decalcification, including organic acids, inorganic acids, ethylenediaminetetraacetic acid (EDTA), and electrolytic decalcification.

JYBL-IV Decalcifying Solution is mainly composed of formaldehyde, formic acid, etc., and does not contain strong acids. It is particularly suitable for decalcification of bone tissue biopsy specimens. Its advantages are:

① rapid action when heated at 37°C, completing within 2–3 hours;

② minimal damage to tissue structure;

③ complete decalcification.

This decalcifying solution is suitable for decalcification of bone tissue biopsy samples, and the decalcification endpoint can be determined by chemical methods. This reagent is intended for research use only and is not suitable for clinical diagnosis or other applications.

Product Series Overview

Cat. No.Product NameMain ComponentsDecalcification TimeTissue Damage RiskCore AdvantagesApplicable Specimen Types
J1525466JYBL-Ⅰ Decalcifying SolutionDilute acid, formaldehyde, formic acid24–36 hRelatively lowBalanced speed and tissue preservationRoutine bone tissue specimens
J1529419JYBL-Ⅱ
Decalcifying Solution
Dilute acid, formaldehyde, formic acidApprox. 24 h (faster than Ⅰ)Moderate (slightly higher than Ⅰ)Faster decalcification than ⅠRoutine bone tissue specimens
J1529418JYBL-Ⅲ Decalcifying SolutionFormaldehyde, 50% formic acidRoom temperature: 2–3 daysRelatively minimal (formic acid is the mildest)Minimal tissue damage; superior morphology preservationSpecial bone tissue specimens
J1529417JYBL-Ⅳ Decalcifying SolutionFormaldehyde, formic acid (acid-free formulation)37°C incubation: 2–3 hRelatively low; temperature control requiredFastest decalcification; designed for bone marrow biopsyBone marrow biopsy specimens

Materials Required (Self-Prepared):

1.Distilled water or PBS

2.Heating apparatus or microwave oven, and dedicated decalcification container (glass)

Operating Instructions (For Reference Only):

1.For bone tissue decalcification, the specimen should not be too thick; generally approximately 3–5 mm.

2.After fixation, wash the tissue 3 times with distilled water or PBS, 20 minutes each time.

3.Transfer the tissue to 20–30 volumes of JYBL-IV Decalcifying Solution, and decalcify at 37°C for 2–3 hours; for routine decalcification, extend the decalcification time, generally 2–3 days.

4.Rinse several times with distilled water.

5.Proceed with routine dehydration and embedding.

Precautions:

1.For bone tissue blocks of 5 mm thickness, routine decalcification generally takes 2–3 days.

2.Moderate heating can accelerate decalcification, but the temperature should generally not exceed 37–40°C. Excessive temperatures may cause loosening and disintegration of bone tissue; temperatures above 60°C must not be used.

3.Decalcification should be thorough to prevent under-decalcification or over-decalcification. The degree of decalcification should be controlled to ensure that tissue sectioning is not affected while shortening the decalcification time as much as possible, to avoid tissue damage caused by prolonged decalcification.

4.Avoid using metal containers for decalcification; glass containers are recommended.

5.Bone tissue should be fixed before decalcification, or fixation and decalcification performed simultaneously. Decalcification should not be performed before fixation, in order to reduce tissue damage.

6.Check the degree of decalcification periodically. Over-decalcification will increase tissue damage and affect staining results.

7.For your safety and health, please wear a lab coat and disposable gloves during handling.

Appendix:

Determination of Decalcification Endpoint (Physical Method): Use methods such as needling, pinching, or clamping. Decalcification can be terminated when the bone tissue becomes soft or when no resistance is felt upon needling. Physical detection methods may cause certain damage to tissue structure; therefore, excessive force or repeated testing should be avoided.

Spécifications

Spécifications et pureté
BioReagent
Stabilité et stockage
Store at Room temperature. long term (12 months).
Conditions de stockage de stockage
Room temperature
Expédié en
Normal
Grade
BioReagent
Product Line
Produits biologiques

Données avancées

Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDateArticle
ZJ26F1040099ZJ26F1040099Certificate of AnalysisOct 23, 2026 J1529417
FAQ et articles
Calculateurs de solution
Avis

Avis des clients

Besoin d'aide pour choisir la qualité ?

Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.

Voir le guide des qualités BioReagent →

Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?

Me rappeler plus tard

Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.

Oups ! Les notifications sont désactivées.