Modified Martin Medium - BioReagent

Cat. No.: M1528261
DISPONIBLE À COMMANDE
QUALITÉ & PURETÉ BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Room temperature
Shipped In
Normal
★
Taille
Allemagne (EU)
USA*
Prix
Qté
250g
M1528261-250g
Sur commande · 8–12 semaines
60,65€
Enter a quantity for the sizes you want to add.

Vue d’ensemble

For fungal sterility testing of pharmaceuticals

Spécifications

Spécifications et pureté
BioReagent
Conditions de stockage de stockage
Room temperature
Expédié en
Normal
Grade
BioReagent
Product Line
Produits biologiques

Données avancées

Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculateurs de solution
Avis

Avis des clients

Application Protocols

The following is general, literature-based guidance for preparing and using selective fungal media. It is not specific to this item; consult the CoA/Spec Sheet for exact directions.

• Materials: Dehydrated medium; purified water; sterile bottles; autoclave; optional selective supplements; sterile filters (0.22 µm) for heat-labile agents; Petri dishes. • Preparation:

  1. Weigh the manufacturer-recommended mass of powder per liter (Not specified for this item; refer to CoA/Spec Sheet).
  2. Suspend in purified water with stirring; heat to dissolve. Adjust pH only if instructed by the manufacturer.
  3. Autoclave at 121°C for 15 minutes unless otherwise directed. Cool to ~50°C.
  4. Aseptically add filter-sterilized, heat-labile supplements if required; mix gently to avoid bubbles.
  5. Pour plates; allow to solidify. Dry surface if excessive condensation forms. • Sample processing (environmental/plant materials): Prepare serial dilutions in sterile buffer; plate appropriate volumes using spread or pour plate methods. Include negative controls. • Incubation: Invert plates and incubate at 20–30°C. Examine daily for colony development and select morphotypes for subculture. • QC/verification: Run growth promotion with a known target strain and inhibition check with a common bacterial contaminant.

Item-specific volumes, concentrations, and supplement identities: Not specified for this item; refer to CoA/Spec Sheet.

Biological Roles

This product is not a single biomolecule but a nutrient matrix designed to support or select for specific microorganisms.

Literature/general functional roles of components in modified Martin-type selective media: • Carbon/energy sources: Carbohydrates (e.g., simple sugars or polysaccharides) support fungal primary metabolism, sporulation, and hyphal extension. • Nitrogen sources: Peptones/yeast derivatives supply amino acids, peptides, vitamins, and trace growth factors essential for many filamentous fungi and oomycetes. • Mineral balance and buffering: Inorganic salts maintain osmotic balance and provide cofactors (e.g., K+, Mg2+, PO43−) important for enzymatic activity. • Selective agents: Dyes and/or antibiotics restrict bacterial proliferation and, in some formulations, limit rapid-spreading mycelia to facilitate colony isolation. These agents modulate membrane integrity, translation, or nucleic acid processes in non-target organisms. • Gelling agent (when agar-based): Provides a semi-solid matrix for colonial morphology, sporulation structures, and isolation streaking.

Item-specific composition and target organism spectrum are Not specified for this item; refer to CoA/Spec Sheet. Users should validate growth/selectivity with relevant control strains.

Buffer Applications

This product is a complete/selective culture medium rather than a dedicated buffering reagent. It is not typically used to prepare defined buffer systems for biochemical assays.

• Practical note: Many culture media contain inherent buffering capacity from phosphates or organic components, which stabilizes pH during incubation. However, if a defined buffer is required for enzymology or extraction, use a dedicated buffering system (e.g., phosphate, citrate, Tris) prepared separately. • Item-specific buffer properties (pH targets, capacity): Not specified for this item; refer to CoA/Spec Sheet.

Green Alternatives

While culture media inherently rely on water as a green solvent, sustainability considerations focus on preparation efficiency, waste minimization, and energy use.

• Greener practices (general):

  • Right-size preparation: Prepare only the volume needed to reduce expired plate/broth waste.
  • Energy optimization: Use validated autoclave cycles (e.g., pre-vacuum, load-appropriate) to minimize energy and water consumption.
  • Post-sterile supplementation: Add heat-labile inhibitors via sterile filtration to avoid repeated autoclaving runs.
  • Reusable glassware: Prefer glass media bottles and reusable Petri dishes where facility practices allow, balancing with contamination control. • Comparative considerations (literature/general):
  • Selective fungal media families (e.g., rose bengal-based vs. chloramphenicol-based) vary in environmental and occupational profiles. Where equivalent performance is achievable, choose supplements with lower toxicity/sensitization potential and better environmental fate.
  • Powdered media vs. pre-poured plates: Powder reduces transport mass/volume and packaging waste but requires on-site sterilization; pre-poured plates save energy on-site but increase shipping bulk and refrigeration needs. Select based on local resource profile. • Packaging and disposal: Empty containers are typically nonhazardous; inoculated media must be autoclaved before disposal per local biosafety and environmental regulations.
Pharmaceutical Uses

No therapeutic claims. This product is intended for research use only (from Product Data: For research use only).

General/literature context in pharmaceutical and industrial microbiology: • Environmental monitoring and bioburden testing: Selective fungal media are often incorporated into environmental surveillance workflows to detect and enumerate molds/yeasts from air, surfaces, and raw materials. • Raw material/microbial limit tests: May be used, where appropriate and validated, to recover objectionable fungi from non-sterile products. • Process hygiene studies: Useful for isolating environmental isolates for identification and trend analysis.

Item-specific pharmacopeial status, compliance (e.g., USP/EP), and validated methods: Not specified for this item; refer to CoA/Spec Sheet and your quality unit before use in GMP settings.

Physical Properties

Item-specific physical parameters are not provided in the Product Data. See below for general, literature-based characteristics of dehydrated culture media; these are not specifications for this item.

• Physical state (item): Dehydrated powdered medium (appearance: Not specified for this item; refer to CoA/Spec Sheet.). • Solubility (literature/general): Designed to be water-soluble; dissolves in purified/deionized water with heating and stirring. • pH of prepared medium (literature/general): Selective fungal media are often adjusted to mildly acidic pH; exact pH target for this item is Not specified for this item; refer to CoA/Spec Sheet. • Osmolality/ionic strength (literature/general): Determined by salts and peptone/carbohydrate content; not specified for this item. • Melting/boiling points, density, refractive index: Not applicable/not specified for this item; refer to CoA/Spec Sheet. • Color/clarity (literature/general): Prepared medium may be translucent to slightly opalescent; color depends on included dyes/antibiotics; item-specific appearance is not specified. • Typical preparation concentration (literature/general): Manufacturer-defined; Not specified for this item; refer to CoA/Spec Sheet.

Quality and Grades

• Supplied grade: BioReagent (from Product Data). In Aladdin’s catalog, BioReagent-grade products are suitable for laboratory research workflows, including microbiology and cell-based assays, where consistent performance and low bioburden are important. • What this implies (general):

  • Manufactured for reproducible growth performance when prepared per instructions.
  • Suitable for routine culture work, environmental isolations, and method development. • Growth performance testing (general literature): Culture media quality is often assessed by growth-promotion and selectivity tests using defined microbial panels. Specific acceptance criteria, test strains, and lot-release data for this item: Not specified for this item; refer to CoA/Spec Sheet. • Additives/stabilizers: Not specified for this item; refer to CoA/Spec Sheet. If included, heat-labile supplements are typically provided separately or indicated for post-sterilization addition. • Documentation: For regulated or validated workflows, request the lot-specific CoA/Spec Sheet for composition details, recommended preparation concentration, target pH, and performance data.
Reaction and Applications

This product is used for microbiological culture, not chemical synthesis. The term “applications” here refers to microbiological workflows.

Literature/general applications of Modified Martin-type media: • Selective isolation: Frequently employed to isolate filamentous fungi and certain oomycetes from soil, plant, water, and environmental samples by suppressing fast-growing bacteria via selective agents. • Enumeration and diversity studies: Useful for CFU counts, recovery of slow-growing colonies, and morphological observation under selective pressure. • Plant pathology and environmental microbiology: Employed in baiting and recovery protocols from plant tissues, rhizosphere soil, or irrigation water. • Method development: Tuning selectivity by adjusting supplements (e.g., antibiotics, dyes) and incubation temperature to favor target taxa while minimizing contaminants. • Teaching/QA labs: Demonstrates principles of selective/differential media and recovery from complex matrices.

Item-specific validated organisms and supplements are Not specified for this item; refer to CoA/Spec Sheet. Users should confirm suitability with control strains and local sample types and, if needed, adjust supplement panels according to the intended targets.

Reaction Conditions

Chemical reaction conditions do not apply. Instead, below are general, literature-based preparation and handling conditions for dehydrated selective media. These are guidelines only and are not specifications for this item.

• Reconstitution: Disperse the manufacturer-recommended mass of powder in purified water with stirring. Heat to near boiling to fully dissolve; avoid scorching. • Sterilization: Autoclave at 121°C for 15 minutes (standard gravity or pre-vacuum cycles as validated). For heat-labile selective agents, sterilize the base medium only; cool to ~45–55°C and aseptically add filter-sterilized supplements. • Plating: Pour into sterile plates at ~45–50°C to a uniform depth (commonly ~20–25 mL for 90-mm plates; adjust per protocol). Allow to solidify on a level surface and dry plates as needed to remove surface moisture. • Incubation (selective fungal recovery, literature/general): 20–30°C is typical for many environmental fungi/oomycetes; exact temperature/time depend on target organisms and regulatory method. • Quality checks: Include uninoculated sterility controls and positive-control strains to confirm growth promotion and selectivity each lot/batch.

Item-specific preparation concentration, target pH after sterilization, and supplement list: Not specified for this item; refer to CoA/Spec Sheet.

Safety and Handling

• GHS/Classification: Not specified for this item; refer to SDS for authoritative hazard and precautionary statements. • Common laboratory precautions (general):

  • Avoid creating dust/aerosols when handling dehydrated medium; dust may cause mechanical respiratory or eye irritation.
  • Wear appropriate PPE: lab coat, safety glasses, and nitrile gloves. Use a dust mask/respirator if dust generation cannot be avoided (per institutional risk assessment).
  • Handle antibiotics-containing media carefully; some supplements can be sensitizers. Prepare in a fume hood when weighing antibiotic powders. • Incompatibilities/conditions to avoid (general): Moisture uptake (caking, degradation); store tightly closed. Avoid excessive heat before reconstitution. When autoclaving, do not overfill flasks to prevent boil-over/foaming. • Autoclaving cautions (general): Many selective agents (e.g., certain antibiotics) are heat-labile and are typically filter-sterilized and added after autoclaving and cooling to ~45–55°C. Follow the item’s CoA/Spec Sheet for heat-stable vs heat-labile components. • First-aid overview (general): If inhaled, move to fresh air. In case of eye contact, rinse cautiously with water for several minutes. If on skin, wash with soap and water. If ingested, rinse mouth and seek medical advice. Always consult the SDS for detailed guidance. • Biohazard note: Once inoculated, plates/broths contain viable microorganisms and must be handled and disposed of as biohazardous waste according to local regulations.
Solvent Selection

This product is a culture medium; the relevant solvent is purified water.

• Primary solvent: Water of appropriate quality for microbiological media preparation (e.g., Type II or better; low TOC; free of inhibitory residual disinfectants). • Compatibility (general): Fully water-soluble upon heating and stirring. Avoid hard/untreated tap water due to variable ions/chloramines that can inhibit growth or precipitate components. • Practical guidance:

  • Use freshly produced deionized or distilled water. If using RO water, ensure adequate polishing (activated carbon, ion exchange) to remove residual oxidants.
  • Degassing is generally unnecessary. Bring to a gentle boil to fully dissolve agar-containing formulations.
  • For heat-labile selective agents, prepare sterile water for subsequent aseptic supplementation via filter-sterilized stock solutions. • When to choose alternatives: Not typically applicable; the medium is formulated for aqueous preparation only. If non-aqueous solvents are contemplated (e.g., dissolving a hydrophobic supplement), prepare a concentrated stock in a compatible solvent (ethanol, DMSO) and add at low final percentages that are known not to inhibit target organisms (literature/general). Validate empirically.
Storage and Reconstitution

• Storage (from Product Data): Room temperature. Keep container tightly closed in a dry place. Protect from humidity to prevent clumping/degradation. • Shipping (from Product Data): Shipped under normal conditions. • Shelf life: Not specified for this item; refer to CoA/Spec Sheet. Inspect for caking, discoloration, or odor before use. • Reconstitution (general guidance): Dissolve the manufacturer-recommended mass in purified water with stirring and heat until fully dissolved. Target pH, concentration, and any required supplements are Not specified for this item; refer to CoA/Spec Sheet. • Sterilization (general): Autoclave base medium at 121°C for 15 min unless otherwise stated. Add heat-labile selective agents via sterile filtration after cooling to ~45–55°C, with aseptic technique. • Prepared media storage (general): Store sealed plates or bottled broth at 2–8°C, protected from light if dye-containing. Allow plates to equilibrate to room temperature and dry condensation before use. Typical in-lab shelf life for many prepared selective media is on the order of weeks; exact stability for this item is Not specified for this item; refer to CoA/Spec Sheet. • Freeze–thaw: Not applicable for dehydrated powder. Avoid freezing prepared agar plates to prevent cracking and loss of performance.

Structure and Identity

• Product type: Dehydrated microbiological culture medium (complex mixture), not a single defined compound. • SKU: M1528261; Product Name: Modified Martin Medium; Grade: BioReagent (from Product Data). • Chemical identifiers (molecular formula, MW, SMILES, InChIKey, CAS, CID): Not specified for this item; refer to CoA/Spec Sheet. • Structural features: Not applicable to a complex medium. This product comprises multiple organic/inorganic components blended as a powdered medium. • 2D/functional description (literature/general): Modified Martin media are commonly formulated as selective media intended to favor growth of filamentous fungi and/or oomycetes while suppressing fast-growing bacteria. Selectivity is typically achieved by inclusion of specific inhibitors (e.g., dyes and/or antibiotics) alongside nutrient sources (carbon, nitrogen, minerals) and, when supplied as agar, a gelling agent. Exact composition and proportions vary by manufacturer and formulation and are not specified here.

Synthetic Utility

Not a synthetic organic reagent. As a microbiological medium, it has no direct role in chemical synthesis.

Related, literature-based utility in bioprocess and biocatalysis: • Strain maintenance: Selective recovery of environmental fungal/oomycete strains that may later serve as sources of enzymes, secondary metabolites, or biocatalysts. • Pre-screening: Isolation plates for obtaining axenic colonies prior to fermentation optimization or metabolite discovery workflows. • Phenotypic assays: Supports morphological and growth-rate comparisons under selective pressure to infer resistance/tolerance traits.

Item-specific composition enabling any specialized synthetic application is Not specified for this item; refer to CoA/Spec Sheet.

Target Specificity

No antibody or molecular targeting information applies. For selective media, “specificity” refers to microbial selectivity, not molecular binding.

• Literature/general note: Modified Martin-type media are typically designed to favor recovery of filamentous fungi and/or oomycetes while suppressing bacterial contaminants using dyes and/or antibiotics. The precise spectrum (which taxa are favored or inhibited) depends on the exact formulation and supplement panel. • Item-specific target organisms and inhibitory spectrum: Not specified for this item; refer to CoA/Spec Sheet and validate with control organisms relevant to your workflow.

Besoin d'aide pour choisir la qualité ?

Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.

Voir le guide des qualités BioReagent →

Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?

Me rappeler plus tard

Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.

Oups ! Les notifications sont désactivées.