This compound belongs to the class of organic compounds known as oligopeptides. These are organic compounds containing a sequence of between three and ten alpha-amino acids joined by peptide bonds.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Propriétés chimiques et physiques
Poids moléculaire
275.260 g/mol
XLogP3
-4.400
Hydrogen Bond Donor Count
5
Hydrogen Bond Acceptor Count
7
Rotatable Bond Count
8
Exact Mass
275.112 Da
Monoisotopic Mass
275.112 Da
Topological Polar Surface Area
159.000 Ų
Heavy Atom Count
19
Formal Charge
0
Complexity
370.000
Isotope Atom Count
0
Defined Atom Stereocenter Count
2
Undefined Atom Stereocenter Count
0
Defined Bond Stereocenter Count
0
Undefined Bond Stereocenter Count
0
The total count of all stereochemical bonds
0
Covalently-Bonded Unit Count
1
Calculateurs de solution
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Avis
Avis des clients
Application Protocols
No validated application protocols are provided in the Product Data for this item.
General preparation (non–item-specific)
Prepare a stock solution in water, buffer, or DMSO (as solubility permits). Typical screening concentrations: 1–100 mM. Filter-sterilize (0.22 μm) for cell-free biochemical assays if required.
For analytical workflows, prepare calibration standards gravimetrically; document solvent, pH, and temperature. Store working standards refrigerated and remake periodically to control for degradation.
For assay- or instrument-specific SOPs, develop and validate conditions (linearity, accuracy, precision, stability) with your laboratory quality system. Always consult the SDS and CoA for substance-specific constraints.
Biological Roles
Item-specific
No biological role or pathway information is provided in the Product Data for Norophthalamic acid.
General context (non–item-specific)
Without definitive structural information, specific biochemical pathways, enzymatic interactions, or metabolic fates cannot be ascribed. If this reagent is intended as a biochemical standard or probe, consult the primary literature or the CoA for verified identity and stereochemistry before attributing function.
For compounds bearing carboxyl groups and possible amide/amine functionality, common biological themes include participation in acid–base equilibria at physiological pH, potential transport via amino acid or peptide transporters (if structurally analogous), and susceptibility to peptidases or amidases. These are broad considerations and should not be taken as substance-specific claims.
For any biological experiments, validate purity, confirm identity (NMR/HRMS), and perform pilot stability checks in your exact matrix (buffer, serum, media) to rule out rapid hydrolysis, adsorption, or degradation.
Buffer Applications
This product is not supplied or promoted as a dedicated buffering agent, and no pKa information is provided.
General guidance (non–item-specific)
If using an organic acid as a buffering component, buffer capacity is centered near its pKa (±1 pH unit). In the absence of a verified pKa, employing this material as the principal buffer is not recommended.
Prefer established biological buffers (e.g., phosphate pH 6–8, HEPES pH 6.8–8.2, MOPS pH 6.5–7.9, acetate pH 3.6–5.6) with known ionic strength and temperature coefficients.
If you must prepare a solution of this reagent: dissolve in water or buffer, measure pH, and adjust cautiously with NaOH/HCl as required for your application; document concentration, pH, and ionic strength.
For electrophoresis, chromatography, or cell culture work, select validated buffer systems with well-characterized behavior to ensure reproducibility.
Green Alternatives
This product is a research reagent, not a solvent. Green chemistry considerations most often pertain to the choice of solvent and coupling reagents when using it in synthesis or analysis.
Greener choices (general guidance)
Solvent selection: Prefer water or aqueous buffers when feasible; among organics, choose lower-toxicity, biorenewable, and higher-boiling recoverable solvents (e.g., ethanol, isopropanol, 2-MeTHF) over chlorinated or highly toxic options.
Coupling chemistry: For amide formation, consider water-compatible carbodiimides (EDC) with green additives, or enzyme-catalyzed ligations, to reduce hazardous byproducts compared with DCC or SOCl2-based routes.
Workup/waste: Minimize halogenated solvent use; employ in-line purification (SCX/SAX cartridges) to reduce silica waste where applicable.
Acyl activation: SOCl2 (hazardous, corrosive) vs. CDI (milder, less noxious byproducts CO2/imidazole) — trade-off: CDI may require strictly anhydrous conditions and can be costlier.
Solvents for dissolution: DMSO (effective but persistent) vs. ethanol/water mixtures (greener, may require pH adjustment). Select based on downstream assay compatibility.
Adopt solvent recovery and microscale optimization to reduce environmental footprint while maintaining performance.
Pharmaceutical Uses
Regulatory/usage status
Research Use Only (per Product Data). Not for human or veterinary use. No pharmacopeial status is provided.
General formulation context (non–item-specific)
Without a defined monograph or excipient designation, this compound is not typically used as a pharmaceutical excipient. If evaluated in pre-formulation research, it would be as a model compound, impurity marker, or synthetic intermediate rather than as a finished dosage form component.
For any formulation screening in R&D, consider: solubility in biorelevant media (FaSSIF/FeSSIF), pH-dependent ionization (requires known pKa), and stability (hydrolysis/oxidation). These parameters are not specified here and must be determined experimentally if needed.
Always segregate GMP activities from R&D use and rely on validated suppliers/specifications for clinical development.
Physical Properties
Item-specific (from Product Data)
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
Boiling point / Melting point: Not specified for this item; refer to CoA/Spec Sheet.
Density, refractive index, pKa, logP, solubility: Not specified for this item; refer to CoA/Spec Sheet.
General/literature context (non–item-specific)
Many low-molecular-weight organic acids and acid-containing biomolecule analogs are crystalline solids with moderate-to-high water solubility in their ionized form (basic pH) and reduced solubility near/below their pKa.
If amide or peptide-like linkages are present, decomposition precedes boiling; therefore, a sharp melting point is more informative than any boiling behavior. Aqueous solubility often improves with mild basification (e.g., 0.1–1.0 M NaOH) or with polar aprotic co-solvents (DMSO) when water alone is insufficient.
Typical IR bands (general): 2500–3300 cm⁻¹ (broad O–H of acids), ~1710–1730 cm⁻¹ (C=O acid), ~1640–1690 cm⁻¹ (amide C=O, if present). NMR chemical shifts: downfield carboxylic proton (if non-exchanging), carbonyl carbons ~165–180 ppm in 13C NMR.
Practical notes (general)
For solubility screening, test: H2O, PBS (pH 7.4), 10–50 mM NaOH, MeOH, EtOH, and DMSO; adjust pH to improve dissolution when appropriate.
Record the exact solvent system and pH used; this information is essential for method transfer and reproducibility.
Quality and Grades
Item-specific (from Product Data)
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Shipped in: Not specified for this item; refer to CoA/Spec Sheet.
What grade means (general guidance)
Research grade materials are intended for laboratory R&D only and may not meet pharmacopeial monographs. When available, specifications often include assay (HPLC or qNMR), identity (NMR/IR/MS), and impurity profiles (residual solvents, inorganic content).
If an HPLC or LC–MS purity is provided on the CoA, note detection wavelength(s) and method, since UV cutoff and chromophore dependence can affect apparent assay.
Stabilizers: None are indicated for this item. If a stabilizer is listed on your CoA (e.g., to prevent hydrolysis), consider its impact on downstream reactions or bioassays.
Recommended verifications before use
Confirm identity by orthogonal methods when critical (e.g., 1H/13C NMR, HRMS).
Review water content (Karl Fischer), residual solvents, and inorganic residue if your application is moisture- or catalysis-sensitive. If such limits are absent: Not specified for this item; refer to CoA/Spec Sheet.
Document lot-specific data to ensure reproducibility across campaigns.
Reaction and Applications
Item-specific (from Product Data)
Manufacturer-supplied application notes: None provided beyond Research Use Only.
General applications (non–item-specific)
As an organic acid or acid-containing small molecule, common research uses may include: analytical reference standard calibration, mechanistic or biochemical assays, or serving as a starting material/intermediate for derivatization (e.g., esterification, amidation) in synthetic studies.
Functional group transformations (general):
Conversion to acid chlorides (e.g., with oxalyl chloride, thionyl chloride) for subsequent acylations.
Carbodiimide-mediated couplings (EDC/HOBt or DIC/HOBt) or uronium/phosphonium reagents (HATU, PyBOP) to form amides with amines.
Formation of esters via Fischer esterification (acidic alcohol media) or via DCC/DMAP protocols under milder conditions.
Analytical applications (general): develop LC–MS or HPLC methods using water/ACN gradients with formic acid or ammonium acetate modifiers; confirm identity by HRMS and NMR.
Practical tips
If the compound is multifunctional (e.g., additional amines/amides), use selective protection strategies to control chemoselectivity (Boc/Fmoc for amines; tBu/benzyl esters for acids).
For sensitive bioassays, prepare fresh aqueous stocks, filter-sterilize (0.22 μm), and minimize freeze–thaw cycles.
Reaction Conditions
Item-specific
No reaction condition data are provided for this item.
General conditions for common transformations (non–item-specific)
Amide coupling: HATU (1.1–1.5 eq), base (DIPEA 2–4 eq), DMF or MeCN, 0–25 C, 0.5–4 h; or EDC (1.2–1.5 eq) with HOBt/HOAt (caution with dry HOAt) and base in DMF, rt to 25 C, 1–12 h. Aqueous: EDC (1.2–2 eq) + NHS (1.2–2 eq) in MES buffer pH 5–6 for active ester formation, then amine coupling at pH 7.5–8.5.
Esterification: Steglich (DCC 1.2 eq, DMAP 0.1 eq, CH2Cl2, 0–25 C) or Fischer (ROH, catalytic H2SO4 or p-TsOH, reflux). Remove urea by filtration in Steglich reactions.
Acid chloride formation: SOCl2 or (COCl)2 (2–5 eq) with catalytic DMF, CH2Cl2 or toluene, 0–25 C; quench cautiously; proceed in situ to acylation to minimize degradation.
Analytical LC conditions: Water/ACN gradients with 0.1% formic acid (ESI+) or ammonium acetate (ESI±). If highly polar, consider HILIC or ion-pairing (e.g., HFBA) while balancing MS compatibility.
These are generalized literature conditions; optimize stoichiometry, temperature, and time based on your substrate’s functional groups and stability.
Safety and Handling
Item-specific (from Product Data)
GHS classification, signal word, pictograms, and H-statements: Not specified for this item; refer to SDS.
Storage conditions: Room temperature (per Product Data).
General safety guidance (non–item-specific)
Handle in a well-ventilated area using standard laboratory PPE: lab coat, gloves (nitrile recommended), and safety glasses or face shield. Avoid inhalation of dust or aerosols; prevent contact with skin and eyes.
Potential hazards typical of organic acids/biomolecule analogs may include irritation to eyes/skin/respiratory tract. Until specific hazards are confirmed, treat as harmful if swallowed and avoid ingestion and inhalation.
Incompatibilities (general): strong oxidizers; strong bases/acids (depending on formulation) can cause decomposition or exothermic neutralization. Avoid reactive acylation or reducing agents unless intended for synthesis.
First aid (overview): In case of skin/eye contact, rinse with water for at least 15 minutes and remove contaminated clothing. If inhaled, move to fresh air. If ingested, rinse mouth; seek medical attention. Always follow your institution’s emergency procedures.
Spill/cleanup: Avoid dust generation. Sweep up inertly or adsorb solutions with suitable material; place in chemical waste. Decontaminate with water and mild detergent where appropriate.
Disposal: Dispose of contents/container in accordance with local/regional regulations. Consult the SDS for authoritative, substance-specific information.
Solvent Selection
Item-specific (from Product Data)
No solvent or solubility specifications are provided for this item.
General strategy for dissolving small organic acids/biomolecule analogs (non–item-specific)
Start with water and common biological buffers (e.g., PBS, Tris, HEPES) near neutral pH; adjust pH slightly basic (pH 8–9) to deprotonate carboxyl groups and enhance solubility if compatible with your use.
If water/buffer is insufficient, introduce miscible co-solvents: MeOH, EtOH, isopropanol, acetonitrile. For challenging cases, DMSO is often effective (prepare a concentrated DMSO stock and dilute into aqueous media with vigorous mixing to avoid precipitation).
Avoid strong acidic conditions for prolonged periods if amide or peptide-like linkages are suspected, as hydrolysis rates increase under harsh pH and temperature.
Quick comparison (general)
Water/buffer: biocompatible, best for bioassays; pH control required.
MeOH/EtOH: greener, volatile; good for analytical/sample prep.
Acetonitrile: excellent for LC; lower viscosity; less green than alcohols.
DMSO: powerful co-solvent; consider assay interference and final DMSO % limits.
Always document exact solvent composition and pH for method transfer.
Storage and Reconstitution
Item-specific (from Product Data)
Storage conditions: Room temperature.
Shipped in: Not specified for this item; refer to CoA/Spec Sheet.
General guidance (non–item-specific)
Keep container tightly closed in a dry, well-ventilated place. Protect from excessive heat, light, and moisture. If hygroscopic or sensitive to hydrolysis (unknown here), promptly re-cap after use and consider desiccation.
Reconstitution: Dissolve in water or appropriate buffer; adjust pH if necessary to aid dissolution. If aqueous solubility is limited, prepare a concentrated DMSO stock (e.g., 100–1000 mM) and dilute into the final medium with strong mixing to avoid precipitation. Record final DMSO percentage to ensure assay compatibility.
Solution stability: In the absence of item-specific data, prepare fresh solutions for critical experiments. For longer-term storage of solutions, aliquot and freeze at −20 to −80 C to minimize freeze–thaw cycles; verify stability by LC–MS/HPLC before use.
Packaging and labeling: Note lot number, concentration, solvent system, and date of preparation on all secondary containers for traceability.
Always defer to the lot-specific CoA and SDS for authoritative storage and handling instructions.
Structure and Identity
Item-specific (from Product Data)
Product name: Norophthalamic acid (SKU: N978035)
CAS: 16305-88-7
PubChem CID: 5489007
InChIKey: 322754 (as provided)
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Notes on identity and structure (general)
No structural descriptors (SMILES, full InChI, stereochemistry) are provided in the Product Data. Please consult the Certificate of Analysis (CoA) or reach out to Aladdin Scientific for structure-confirming identifiers and spectral data.
The trivial name suggests an organic acid; however, without definitive identifiers, specific functional groups and stereochemical configuration cannot be asserted here.
Describing the 2D structure (general guidance)
In the absence of a provided structure, 2D features (ring systems, substituent pattern, number/position of carboxyls, potential amide/amine content) cannot be detailed. For planning analytical confirmation, consider: 1H/13C NMR, HRMS (ESI), IR (carboxyl/amide stretches), and, if chiral centers are expected, optical rotation or chiral HPLC.
Synthetic Utility
Item-specific
No structural or functional group specification is provided; utility described below is general to organic acids/acid-containing small molecules.
General synthetic roles (non–item-specific)
Acyl donor: Carboxylic acids can be transformed into activated species (acid chlorides, anhydrides, mixed carbonates, CDI adducts) to acylate nucleophiles (amines, alcohols, thiols) with control over chemoselectivity via protecting groups.
Amide synthesis: EDC/HOBt, HATU/DIPEA, or PyBOP/DIPEA in DMF/MeCN often provide efficient couplings at 0–25 C. For aqueous systems, EDC with NHS can furnish NHS-esters that react with amines at physiological pH.
Ester formation: Fischer esterification (ROH/H+, reflux) or Steglich esterification (DCC/DMAP, rt) for acid-sensitive substrates.
Derivatization for analytics: Formation of UV- or fluorophore-tagged esters/amides to enhance chromatographic detection and MS ionization efficiency.
Protecting group tactics: Convert acids to tBu esters (removable with TFA) or benzyl esters (hydrogenolysis) to mask reactivity during multistep sequences.
Integrate orthogonal protection (e.g., Boc vs. Fmoc for amines) and monitor reactions by LC–MS to avoid overacylation when multiple nucleophiles are present.
Target Specificity
Not applicable. This product is a small-molecule research reagent, not an antibody, protein, or nucleic acid probe.
Item-specific target/epitope/clone/isotype data: Not specified for this item; refer to CoA/Spec Sheet.
Foire aux questions
What is the purity of this product?
This product is supplied at ≥97% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 16305-88-7, the molecular formula is C10H17N3O6, and the molecular weight is 275.260 g/mol. InChIKey RPVCUZZJCXVVDW-WDSKDSINSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Nous utilisons des cookies pour garantir le bon fonctionnement du site et, lorsque cela est autorisé, pour améliorer votre expérience. Vous pouvez gérer vos préférences à tout moment dans les Paramètres. Pour en savoir plus, consultez notre Politique relative aux cookies.
Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?
Me rappeler plus tard
Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.