Plain Broth - BioReagent

Cat. No.: P1528356

QUALITÉ & PURETÉ BioReagent

Storage

Room temperature

Shipped In

Normal

Vue d’ensemble

Contains 0.1% potassium dihydrogen phosphate, for enrichment of pathogenic Aeromonas hydrophila, and may also be used for enrichment of other bacteria

Spécifications

Spécifications et pureté

BioReagent

Conditions de stockage de stockage

Room temperature

Expédié en

Normal

Grade

BioReagent

Product Line

Produits biologiques

Application Protocols

Item-specific tested applications and conditions are not provided in the listing. The following is general, literature-based guidance for preparing and using a plain/nutrient broth. Adjust per your CoA/Spec Sheet and method requirements.

• Broth preparation (general)

  1. Weigh the vendor-specified mass of medium per liter (Not specified for this item; refer to CoA/Spec Sheet).
  2. Add to ~80–90% of the final volume of purified water with stirring; warm gently to dissolve.
  3. Adjust pH if directed by the specification.
  4. Bring to final volume; dispense into appropriate vessels (tubes/flasks/bottles) with headspace for aeration if needed.
  5. Sterilize (e.g., autoclave 121 °C for ~15 min) unless using sterile filtration for heat-labile components.

• Inoculation and incubation (general)

  • Inoculate with a standardized cell density (e.g., OD600 or McFarland standard). Incubate at organism-appropriate temperature (often 30–37 °C) with shaking for aerobes.
  • For growth curves, measure OD600 at defined intervals; blank with uninoculated sterile broth from the same lot.

• Quality controls

  • Include sterility controls and growth-promotion testing with reference strains when required.

• Disposal

  • Deactivate cultures by autoclaving or chemical disinfectants before disposal per institutional biosafety procedures.

Biological Roles

Plain Broth is a functional matrix that supports microbial metabolism; it is not a single biomolecule with a defined biological role.

• Functional role (general/literature)

  • Supplies peptides, amino acids, vitamins, minerals, and simple carbon/nitrogen sources in proportions suitable for growth of many non-fastidious bacteria.
  • Facilitates cell division, biomass accumulation, and expression of housekeeping metabolic pathways under aerobic or anaerobic regimens, depending on vessel and headspace.
  • Serves as a neutral, non-selective background for assessing intrinsic growth characteristics, stress responses, and effects of additives (e.g., antibiotics, inducers).

• Use in experimental biology

  • Inoculum expansion prior to analytical assays (e.g., enzyme activity, metabolite profiling) where defined media are not essential.
  • Baseline medium for comparative studies, enabling detection of phenotype changes upon supplementation.

• Limits

  • As an undefined medium, it can introduce variability in metabolite pools and gene expression compared with chemically defined media; select media type based on study goals (e.g., metabolomics often prefers defined compositions).

Item-specific biochemical composition and growth-promotion specifications are Not specified for this item; refer to CoA/Spec Sheet.

Buffer Applications

Plain Broth is not a dedicated buffering system. While many nutrient broths exhibit modest intrinsic buffering near neutral pH due to phosphates, amino acids, and peptides, they are not suitable substitutes for defined buffers when precise pH control is required.

• Item-specific buffer details: Not specified for this item; refer to CoA/Spec Sheet.

• General guidance (literature)

  • For pH-critical experiments, overlay Plain Broth with a defined buffering system (e.g., phosphate, MOPS, HEPES) at an appropriate ionic strength and pKa.
  • Monitor pH pre- and post-sterilization; autoclaving can shift pH, and active growth often acidifies media.
  • If downstream assays are pH sensitive, consider defined media formulated with explicit buffering capacity.

Green Alternatives

While culture media are not classical organic solvents or reagents, sustainability considerations still apply to microbiology workflows.

• Resource and waste considerations (general)

  • Prepare only the volume needed to minimize disposal of unused sterile broth.
  • Prefer energy-efficient sterilization cycles and load autoclaves fully to improve throughput per cycle.
  • Where method-permitted, sterile filtration can avoid autoclave energy use; balance against filter waste and cost.

• Packaging and logistics

  • Selecting dehydrated media over prefilled single-use bottles can reduce shipping mass and plastic waste; reconstitute on demand.
  • Consolidate orders and select room-temperature shipping (as specified for this item) to reduce cold-chain footprint.

• Comparative view (general)

  • Plain (nutrient) broth vs enriched/selective media:
    • Plain broth typically has fewer specialized components, which may lower upstream sourcing impact, but may require supplementation for demanding organisms (trade-off between simplicity and performance).

• Lab practices

  • Use reusable glassware where feasible; validate cleaning/sterilization protocols.
  • Implement media “expiry after opening” controls to reduce spoilage and remake cycles.

Note: No item-specific eco-labels or certifications are provided for this SKU; optimization suggestions above are general best practices.

Pharmaceutical Uses

No therapeutic claims are made. In pharmaceutical and biotechnology laboratories, plain/nutrient broths can be used as general-purpose media within non-clinical research and quality-control contexts.

• Item-specific regulatory status: Not specified for this item; refer to CoA/Spec Sheet for any available compliance notes.

• General/literature roles

  • Growth promotion testing (GPT) controls, environmental isolates maintenance, and bioburden method development where non-selective media are appropriate.
  • Upstream inoculum preparation for process development strains (non-GMP research). For GMP or compendial testing, select media explicitly compliant with USP/EP/JP specifications and document lot-specific GPT.
  • Vehicle for evaluating excipient or disinfectant interference on microbial viability in method suitability studies.

• Practical notes

  • Document lot numbers, preparation parameters, sterility checks, and GPT outcomes per QA requirements.
  • Transition to pharmacopeial media for release/stability testing as mandated by methods; plain broth may serve for feasibility work and preliminary optimization.

Physical Properties

As a complex culture medium, Plain Broth does not possess a single set of compound-specific physical constants.

• Item-specific physical data

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • pH (as supplied or at use concentration): Not specified for this item; refer to CoA/Spec Sheet.
  • Solubility: Not specified for this item; refer to CoA/Spec Sheet.
  • Density, refractive index, boiling point, melting point: Not applicable/Not specified for this item; refer to CoA/Spec Sheet.

• General/literature guidance (typical media behavior; not item specification)

  • Form: Often provided as a dehydrated powder intended to be reconstituted with purified water; some suppliers offer ready-to-use liquids.
  • Solubility: Components are generally water-soluble; gentle warming and agitation aid dissolution.
  • Typical working concentration: Common nutrient/“plain” broths are prepared at ~10–15 g/L (literature), but required mass and target pH depend on the exact formulation and vendor specification.
  • Typical preparation pH: Near neutral (e.g., ~6.8–7.4 at 25 °C, literature) before sterilization; autoclaving may shift pH slightly.

Always consult the CoA/Spec Sheet for SKU-specific preparation mass per liter, target pH, and any clarifying/filtration notes.

Quality and Grades

• Item-specific grade

  • Grade/Purity: BioReagent (as listed). This denotes suitability for general biological research workflows and routine microbiology where high lot-to-lot consistency is important.

• What BioReagent grade implies (general guidance)

  • Manufactured to meet performance criteria relevant to life science applications (e.g., reliable growth support for non-fastidious organisms, clarity after dissolution when prepared correctly, and reproducibility across lots).
  • Typically supported by certificate of analysis (CoA) parameters such as pH at use concentration, appearance, and growth performance tests against specified strains; however, exact QC metrics for this SKU are Not specified for this item; refer to CoA/Spec Sheet.

• Stabilizers/additives

  • Any stabilizers, enrichment factors, or selective agents are Not specified for this item; refer to CoA/Spec Sheet.

• Practical considerations

  • For regulated testing or method-driven microbiology (e.g., pharmacopeial methods), verify that this lot meets the medium specifications called out in your method (pH, composition, sterility, growth promotion tests). If a specific pharmacopeial compliance is needed, confirm via the CoA or select a medium explicitly labeled for that standard.

Reaction and Applications

This product functions as a microbiological growth medium rather than a chemical reagent for synthetic reactions.

• Item-specific application scope

  • Manufacturer Applications: Not specified in the listing beyond “For research use only.” Use cases therefore follow standard practices for plain/nutrient broths.

• General/literature applications (non-item-specific)

  • Routine cultivation and maintenance of many non-fastidious bacteria under aerobic or facultative conditions.
  • Inoculum preparation for downstream assays (e.g., antimicrobial susceptibility testing bases, colony-forming unit standardization).
  • Growth kinetics studies (OD600 monitoring), media optimization screens, and teaching labs.
  • As a base matrix for supplementation (e.g., carbohydrates, buffers, or selective agents) to create tailored media.

• Practical tips

  • Reconstitution: Dissolve the prescribed mass per liter in purified water; adjust pH if directed by CoA; sterilize (autoclave or filter) as recommended. Item-specific mass and target pH are Not specified for this item; refer to CoA/Spec Sheet.
  • Asepsis: Minimize contamination—work near a flame or in a biosafety cabinet as appropriate.
  • Inoculation: Standardize inoculum using McFarland standards or OD measurements for reproducibility.
  • Incubation: Temperature and time depend on organism (e.g., mesophiles ~30–37 °C, literature). Agitation (150–250 rpm in baffled flasks) improves aeration for aerobes.
  • Documentation: Record lot number and preparation details; verify sterility controls and growth-promotion controls as required by your QA system.

Reaction Conditions

Chemical reaction parameters are not applicable. The relevant “conditions” pertain to microbial cultivation and should be adapted to the organism and objective.

• Item-specific conditions: Not specified for this item; refer to CoA/Spec Sheet for preparation mass per liter, target pH, and sterilization guidance.

• General/literature cultivation parameters

  • Preparation: Dissolve the specified mass in purified water, adjust pH near neutral if directed, and sterilize (e.g., autoclave 121 °C, ~15 min). Some workflows may require sterile filtration to preserve heat-labile additives.
  • Inoculum: Standardize to a defined OD600 or McFarland standard for reproducibility.
  • Incubation temperature: Commonly 30–37 °C for mesophiles; psychrophiles or thermophiles require organism-specific temperatures.
  • Aeration: For aerobes, shake flasks at 150–250 rpm (baffled) with ≤20–30% fill volume to enhance oxygen transfer; use vented caps. For anaerobes, deoxygenate and use appropriate reducing systems.
  • Duration: From hours to overnight for fast growers; monitor OD600 to avoid overgrowth when metabolites are endpoints.
  • Quality controls: Include sterility controls (uninoculated broth) and growth-promotion controls with reference strains as required by your QA system.

These are general guidelines and should be validated for each organism and application.

Safety and Handling

• Item-specific hazard and GHS information

  • Signal word: Not specified for this item; refer to SDS.
  • Hazard statements (H-codes): Not specified for this item; refer to SDS.
  • GHS classification and pictograms: Not specified for this item; refer to SDS.

• General laboratory precautions (not item-specific; consult SDS for authoritative guidance)

  • PPE: Lab coat, safety glasses, and appropriate gloves. Avoid inhalation of powders/aerosols and contact with eyes/skin.
  • Hygiene: Handle in a clean area to avoid microbial contamination of workspaces; disinfect benches before/after use.
  • Microbiological risk: While the dry medium itself is typically low hazard, once reconstituted and inoculated it can support prolific microbial growth. Treat all used media and cultures as biohazardous; employ BSL-appropriate practices.
  • Incompatibilities: Avoid contact with strong oxidizers and reactive chemicals that may degrade organic constituents. Maintain sterile technique to prevent unintended growth.
  • First aid (general): In case of eye/skin contact, rinse with water. If inhaled, move to fresh air. If ingested, rinse mouth. Seek medical attention if symptoms persist.
  • Spills: For powder, avoid dust generation; gently sweep with minimal disturbance. For liquids, absorb with inert material and disinfect.
  • Waste: Autoclave or chemically disinfect used cultures and media prior to disposal per institutional biosafety procedures.

Defer to the product SDS and institutional biosafety policies for definitive safety instructions.

Solvent Selection

This product is a culture medium, not a solvent; traditional solvent-selection criteria (polarity, dielectric constant) are not directly applicable.

• Item-specific notes

  • Intended diluent: Purified/deionized water (typical for microbiological media; confirm exact preparation instructions on the CoA/Spec Sheet).

• General/literature guidance for reconstitution

  • Water quality: Use ASTM Type 1 or Type 2 water to minimize inhibitory ions or disinfectant residues. Avoid tap water or residual sanitizer carryover.
  • Dissolution: Add medium gradually to water with stirring to avoid clumping; gentle warming (≤50 °C) can aid dissolution without degrading heat-labile components.
  • Sterilization: Autoclave at 121 °C for ~15 minutes (literature) or sterile-filter if composition is heat-labile; follow vendor-specific directions.

• When to choose “Plain Broth” vs alternatives (general)

  • Plain/nutrient broth: For routine culture maintenance, inoculum expansion, and non-selective growth of many non-fastidious bacteria.
  • Buffered or enriched broths (e.g., tryptic soy broth, LB, or selective/enrichment broths): Prefer when specific nutritional profiles, pH buffering, or selectivity are required by organisms or methods.

Always consult the item’s specific preparation mass per liter and sterilization method: Not specified for this item; refer to CoA/Spec Sheet.

Storage and Reconstitution

• Item-specific storage and shipping

  • Storage Conditions: Room temperature (as listed).
  • Shipped In: Normal (as listed).

• Shelf life and stability

  • Item-specific expiry and stability after opening: Not specified for this item; refer to CoA/Spec Sheet.

• Reconstitution and sterilization (general/literature guidance; not item-specific)

  • Water: Use purified/deionized water. Dissolve the vendor-specified mass per liter (Not specified for this item; refer to CoA/Spec Sheet).
  • pH: Adjust to the specified target at 25 °C if directed. Expect small shifts after autoclaving.
  • Sterilize by autoclaving at 121 °C for ~15 minutes, unless sterile filtration is recommended to preserve heat-labile components. Cool to handling temperature before use.
  • Storage of prepared broth: If sterility is maintained, many broths can be stored refrigerated (2–8 °C) for a limited time (literature). Validate holding times and avoid repeated thermal cycling.

• Handling

  • Work aseptically to prevent contamination. Label with lot number, preparation date, and pH. Inspect for turbidity or precipitate indicative of contamination or instability before use.

For all composition, preparation mass, and pH targets specific to SKU P1528356, consult the CoA/Spec Sheet.

Structure and Identity

Plain Broth is an undefined, multi-component culture medium used for general microbial cultivation. As a complex mixture, it does not have a single molecular structure.

• Item-specific identifiers
  • CAS: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
  • Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
  • InChIKey: Not applicable (complex mixture).
  • SMILES: Not applicable (complex mixture).
• Structural features (general/literature)
  • Typically classified as an “undefined” or “complex” medium, historically derived from digests/extracts supplying peptides, amino acids, vitamins, minerals, and simple carbon sources.
  • No discrete 2D/3D molecular structure; instead, a heterogeneous distribution of low- to mid-molecular-weight organic components with inorganic salts, if present.
• Nomenclature context (general)
  • Also known in the literature as “nutrient broth” or “plain nutrient broth,” commonly used for routine culture maintenance, inoculum preparation, and growth curve studies.

Note: Exact composition and any stabilizers, enrichments, or additives for SKU P1528356 are Not specified for this item; refer to CoA/Spec Sheet.

Synthetic Utility

This product is not a synthetic organic reagent; classical transformations (e.g., coupling, reductions) are not applicable.

• General applicability in biocatalysis workflows (literature)

  • Serves as a non-selective growth medium to expand microbial biomass prior to whole-cell biocatalysis or enzyme expression in organisms that do not require specialized media.
  • Can be supplemented with inducers, trace metals, or co-substrates to prepare inocula for biotransformations; however, defined media often give tighter control over metabolic state.

• Retrosynthetic value

  • Not applicable; there is no discrete functional group chemistry to leverage.

For chemical synthesis needs, select appropriate reagents and solvents from dedicated categories; use Plain Broth for biological culture phases only.

Target Specificity

Not applicable. This product is not a biological targeting reagent (e.g., antibody, ligand, probe). No antigen/epitope or species specificity applies.