Sperm Nuclear Protein Staining Solution (Eosin-Aniline Blue Method) - BioReagent,Biological Stain,for microscopy

Cat. No.: S1511569
DISPONIBLE À COMMANDE
QUALITÉ & PURETÉ BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Biological Stain ? Biological stain grade — dyes characterized for staining cells and tissues. Use in histology and microscopy where staining consistency matters. for Microscopy ? Microscopy grade — reagents/stains suited to sample prep and imaging. Use in microscopy where clarity and low background are needed.
Synonyms
Sperm Nucleo Protein Stain
Storage
Store at 2-8°C,Protected from light,Room temperature
Shipped In
Normal
Application
Cell Staining
★
Taille
Allemagne (EU)
USA*
Prix
Qté
20T
S1511569-20T
Sur commande · 8–12 semaines
242,88€
Enter a quantity for the sizes you want to add.

Vue d’ensemble

Under normal conditions, the basic proteins (nuclear proteins) bound to sperm nucleus DNA undergo a natural maturation process from histones to protamines. The mature protamines provide special protection for sperm genes (DNA). The gradual replacement of histones by protamines is referred to as sperm nucleoprotein transition, which has important physiological significance. The sperm nucleus carries all the paternal genetic information, and these genes can only be expressed after fertilization. Before fertilization, sperm genes are tightly condensed under the special protection of protamines, with no DNA transcription. However, abnormal nucleoprotein transition can lead to male infertility or early embryonic death and miscarriage. The mechanisms are as follows: ① Sperm DNA becomes unstable and susceptible to damage, making conception difficult; ② Once fertilized, the sperm nucleus cannot decondense normally due to abnormal nucleoprotein transition, thus interfering with the fusion of male and female pronuclei; ③ The embryo fails to develop normally, resulting in embryonic death and miscarriage. Therefore, the amount of histones serves as an important indicator of sperm maturity.

Sperm Nucleoprotein Staining Solution (Eosin‑Aniline Blue Method). The principle is that under acidic conditions, aniline blue can specifically bind to lysine residues rich in histones in the sperm nucleus to form a violet‑blue compound. The maturity of spermatozoa is judged according to the staining intensity. This product is for research use only and not intended for clinical diagnosis or other applications.

Product Components and Storage Conditions:

S1511569
Component
20T
Storage
S1511569A
10× Wash Buffer Concentrate
10mL
RT
S1511569B
Fixative Solution
10mL
2-8℃. Store in the dark.
S1511569C
Aniline Blue Stain
10mL
RT
S1511569D
10× Elution Buffer Concentrate
10mL
RT
S1511569E
Eosin Counterstain
10mL
RT

Materials Required:

1. Distilled water, fresh semen sample, graded ethanol, xylene or eco-friendly dewaxing solution, eco-friendly clearing solution, neutral balsam

2. EP tubes, pipettes or pipettors, centrifuge, incubator, adhesive microscope slides

 Protocol (For Reference Only):

1. Prepare working wash solution: Dilute the 10× Wash Buffer Concentrate with distilled water at a ratio of 1:10.

2. Prepare working elution solution: Dilute the 10× Elution Buffer Concentrate with distilled water at a ratio of 1:10.

3. Transfer 0.2–0.5 mL of liquefied semen into an EP tube, add 1–1.5 mL working wash solution, and mix by repeated pipetting. Centrifuge at 2000 rpm for 5 min at room temperature, discard the supernatant, and retain the sperm pellet. Repeat this step 3 times.

4. Add 0.1–0.2 mL working wash solution to the EP tube from Step 3 to prepare a sperm suspension.

5. Apply 15 μL of the sperm suspension evenly onto an adhesive microscope slide and air-dry.

6. Add 2–3 drops of fixative solution onto the smear, fix at room temperature for 5–15 min, rinse with distilled water for 5–10 min, and decant excess water.

7. Add 2–4 drops of aniline blue staining solution, stain at room temperature for 5 min, rinse with distilled water for 5 min, and decant excess water.

8. Insert the slide vertically into a container with working elution solution, fully immersing the smear. Incubate at room temperature for 2–5 min.

9. Rinse with distilled water for 1–5 min and decant excess water.

10. Add 2–4 drops of counterstain, stain at room temperature for 2–5 min, rinse with distilled water for 1–5 min.

11. Dry the slide rapidly and examine microscopically. For long-term storage, dehydrate sequentially in 70%, 80%, 95%, and 100% ethanol for 2 min each, clear in xylene or dewaxing/clearing solution, and mount with neutral balsam.

Staining Results:

Sperm with immature nucleoprotein: violet blue or dark blue

Sperm with mature nucleoprotein: red (light blue or colorless without eosin counterstaining)


   


Precautions: 

1. When rinsing the slides with distilled water, control the flow rate carefully to avoid washing off the sperm on the smear area.

2. When adding the staining solution, ensure it fully covers the smear area and mix evenly by pipetting.

3. After discarding excess water, prevent the smear from drying out.

4. For your safety and health, please wear a lab coat and disposable gloves during operation.

Spécifications

Synonymes
Sperm Nucleo Protein Stain
Spécifications et pureté
BioReagent,Biological Stain,for microscopy
Stabilité et stockage
Each component has a shelf life of 1 year under corresponding storage conditions.
Conditions de stockage de stockage
Store at 2-8°C,Protected from light,Room temperature
Expédié en
Normal
Grade
Biological Stain, BioReagent, pour la microscopie
Product Line
Produits biologiques

Données avancées

Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDateArticle
ZJ26F0433810ZJ26F0433810Certificate of AnalysisApr 03, 2026 S1511569
Propriétés chimiques et physiques
SensibilitéLight-sensitive
FAQ et articles
Calculateurs de solution
Avis

Avis des clients

Foire aux questions

What does Biological Stain mean?
Biological Stain indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at 2–8 °C, protected from light. The material is light-sensitive — keep it in its original opaque or amber container.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?

Me rappeler plus tard

Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.

Oups ! Les notifications sont désactivées.