Sperm Vitality Detection Solution (HOS Method) - BioReagent,Biological Stain,for microscopy

Cat. No.: S1506743
DISPONIBLE À COMMANDE
QUALITÉ & PURETÉ BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Biological Stain ? Biological stain grade — dyes characterized for staining cells and tissues. Use in histology and microscopy where staining consistency matters. for Microscopy ? Microscopy grade — reagents/stains suited to sample prep and imaging. Use in microscopy where clarity and low background are needed.
Storage
Store at -20°C
Shipped In
Ice chest + Ice pads
★
Taille
Allemagne (EU)
USA*
Prix
Qté
10ml
S1506743-10ml
Sur commande · 8–12 semaines
43,30€
Enter a quantity for the sizes you want to add.

Vue d’ensemble

  Clinically, the integrity of the sperm membrane can be assessed to evaluate sperm vitality. When sperm are placed in a hypo-osmotic solution, water molecules enter the sperm through the membrane, causing an increase in sperm volume and swelling. This swelling is particularly evident in the tails of normal sperm. In contrast, sperm with impaired membranes or dead sperm typically do not swell.

  Sperm Vitality Detection Solution (HOS Method), also known as Sperm Hypo-osmotic Swelling Solution, is composed of sodium citrate, D-fructose, and other components. Utilizing the principle of hypo-osmotic swelling described above, it effectively analyzes sperm survival rates. This kit is intended for research use only and is not suitable for clinical diagnosis or other purposes.

Procedure

1. Take a clean small test tube and add 1 mL of Sperm Hypo-osmotic Swelling Solution. Pre-warm at 37°C for 5 minutes.

2. Add 0.1 mL of liquefied semen sample. Mix gently and incubate at 37°C for 30 to 60 minutes.

3. Observe under a phase-contrast microscope. Sperm exhibiting swelling are identified by changes in tail morphology and are considered viable.

Viable Sperm
Dead Sperm
Tail morphology shows changes
No change

4. Count 200 sperm and calculate the percentage of swollen sperm (viable sperm) among them.

  Reference Range: Within 30-60 minutes after ejaculation, over 70% of sperm should be motile. In the Hypo-osmotic Swelling Test, over 60% of sperm should exhibit tail swelling.

Precautions

  1. Sperm vitality should be assessed immediately after semen liquefaction. It is best to perform the test within 30 minutes, and under no circumstances should it exceed 1 hour after liquefaction. Delays may lead to sperm deactivation due to dehydration or temperature changes, resulting in inaccurate results.

  2. To avoid repeated freeze-thaw cycles, which may compromise the reagent's efficacy, aliquot the solution into 1 mL portions after the first thaw and store frozen.

  3. Use the reagent promptly after opening the vial to prevent potential effects on subsequent experimental results.

  4. For your safety and health, please wear a lab coat and disposable gloves during operation.

Spécifications

Spécifications et pureté
BioReagent,Biological Stain,for microscopy
Stabilité et stockage
Store at -20℃ long term (12 months). Avoid freeze/thaw cycle.
Conditions de stockage de stockage
Store at -20°C
Expédié en
Ice chest + Ice pads
Ce produit nécessite l'expédition en chaîne froide. Les services terrestres et autres services économiques ne sont pas disponibles.
Grade
Biological Stain, BioReagent, pour la microscopie
Product Line
Produits biologiques

Données avancées

Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDateArticle
ZJ25F1230171ZJ25F1230171Certificate of AnalysisOct 10, 2026 S1506743
FAQ et articles
Calculateurs de solution
Avis

Avis des clients

Foire aux questions

How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What does Biological Stain mean?
Biological Stain indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Besoin d'aide pour choisir la qualité ?

Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.

Voir le guide des qualités BioReagent → Voir le guide des qualités Biological Stain → Voir le guide des qualités for Microscopy →

Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?

Me rappeler plus tard

Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.

Oups ! Les notifications sont désactivées.