trans-ACBD (trans-1-Aminocyclobutane-1,3-dicarboxylic acid) is a very potent and selective NMDA receptor agonist that modulates glutamatergic neurotransmission.
Spécifications
Conditions de stockage de stockage
Store at -20°C
Expédié en
Ice chest + Ice pads
Ce produit nécessite l'expédition en chaîne froide. Les services terrestres et autres services économiques ne sont pas disponibles.
Noms et identifiants
Poids moléculaire
159.14
Données avancées
Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculateurs de solution
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Avis
Avis des clients
Application Protocols
No tested application protocols are supplied for this item. The following are general, non-binding examples tailored to amino-dicarboxylate research reagents. Adjust to your system and consult the SDS.
Example: Aqueous stock preparation (research use only)
Weigh the compound quickly. Add water or buffer (e.g., HEPES, pH 7.4). If dissolution is incomplete, titrate with small aliquots of 1 M NaOH to reach full dissolution, recording final pH. Filter through 0.22 µm if sterility is needed. Store aliquots at −20 °C.
Example: Transporter uptake assay setup (general)
Plate cells expressing the transporter of interest. Equilibrate in uptake buffer (e.g., HEPES-buffered saline). Add serial dilutions of the compound (vehicle ≤1% DMSO if used). Incubate at 37 °C for a defined period, wash rapidly, and quantify uptake via LC-MS or radiolabeled tracer displacement.
Example: Derivatization for HPLC detection
React aliquots with FMOC-Cl under basic conditions to form UV-active derivatives; inject on reversed-phase LC with a phosphate or volatile ammonium buffer.
These are illustrative only. Optimize concentrations, incubation times, and detection modalities for your specific application.
Biological Roles
Item-specific biological function claims are not provided, and this product is designated for research use only.
General/literature context for trans-aminocycloalkane dicarboxylates
These molecules are often designed as conformationally restricted analogues of L-glutamate. They can serve as probes for excitatory amino acid transporters (EAAT1–5) and for distinguishing receptor/transporter engagement in biochemical assays (research use only).
The trans stereochemistry constrains side-chain orientations, enabling SAR studies on substrate recognition by transporters and enzymatic systems.
In cell-based systems, uptake kinetics and competitive inhibition parameters are typically determined to characterize transporter interactions; exact values are compound- and system-dependent and are not specified for this item.
Use limitations
No clinical, diagnostic, or therapeutic uses are implied. All in vitro/in vivo work must be conducted under appropriate IACUC/IRB approvals where applicable and in accordance with institutional policies.
Recommendation
Verify stereochemistry and salt form on the CoA/SDS before quantitative biological studies. Prepare fresh solutions, control pH/osmolality, and include vehicle controls to isolate compound-specific effects.
Buffer Applications
This material is not a classical buffering agent supplied with a defined pKa window like HEPES or phosphate. It is generally used as an analyte or ligand rather than as a buffer component.
Practical notes (general)
If used in biological assays, dissolve in an appropriate buffer (e.g., phosphate-, HEPES-, or Tris-based) and adjust pH to maintain compound stability and solubility. Avoid exceeding recommended organic co-solvent content for cells or enzymes.
For LC methods, volatile buffers (ammonium formate/acetate) at controlled pH can aid in retention and MS compatibility.
Item-specific buffer capacity/pKa values: Not specified for this item; refer to CoA/Spec Sheet or determine experimentally.
Green Alternatives
As a polar amino-dicarboxylic acid–type compound, the primary green chemistry considerations center on solvent systems and protection chemistry rather than replacement of the active itself.
Greener handling strategies (general)
Prefer water-based media for stock solutions and reactions where feasible (e.g., EDC coupling in buffered aqueous/ethanol systems).
Use ethanol or isopropanol as co-solvents instead of DMF/DMSO when solubility allows.
Minimize protecting-group steps by employing aqueous coupling or enzyme-catalyzed transformations to reduce waste.
Comparison of solvent options (general guidance)
Water/EtOH: Low hazard, renewable content; may require pH control and yields can be sensitive to ionic strength.
DMSO/DMF: Excellent solvating power but higher EHS burden; limit volumes and ensure proper waste segregation.
Acetonitrile: Useful for LC and some couplings; moderate EHS profile; recover/recycle where possible.
Operational improvements
Microscale reaction development to reduce solvent usage.
Employ in-line pH monitoring to prevent over-titration during dissolution.
Explore flow chemistry for peptide-like couplings to improve mass efficiency.
Note: No compound-specific green certification is claimed here. Tailor green choices to your process constraints and consult your EHS team.
Pharmaceutical Uses
No pharmacopeial status or excipient role is specified for this item. It is sold for research use only.
General considerations
Similar amino-dicarboxylate analogues may be used in discovery settings as reference standards, transporter substrates/inhibitors in ADME assays, or as components in mechanistic pharmacology studies (non-clinical).
If used in formulation feasibility studies (non-clinical), common approaches include preparing isotonic, pH-controlled aqueous solutions; however, no item-specific formulation guidance or regulatory monograph is provided here.
Compliance note
Do not use in human or veterinary applications. For any GLP/GMP needs, request lot-specific documentation and suitability statements from Aladdin Scientific.
Physical Properties
The following item-specific physical constants are not provided in the current listing.
Item-specific values
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Melting point: Not specified for this item; refer to CoA/Spec Sheet.
Boiling point: Not applicable for most amino-dicarboxylic acids (they decompose before boiling); item-specific value Not specified for this item; refer to CoA/Spec Sheet.
Density: Not specified for this item; refer to CoA/Spec Sheet.
Refractive index: Not applicable to solids; Not specified for this item; refer to CoA/Spec Sheet.
Solubility: Not specified for this item; refer to CoA/Spec Sheet.
LogP: Not specified for this item; refer to CoA/Spec Sheet.
pKa values: Not specified for this item; refer to CoA/Spec Sheet.
General/literature context for trans-aminocycloalkyl dicarboxylates
State: Typically crystalline solids; often exist as zwitterions near neutral pH (literature).
Solubility trends: Frequently moderately to highly soluble in water when converted to appropriate salt forms (e.g., as sodium salts) or when pH-adjusted; low solubility in nonpolar organic solvents (literature).
Thermal behavior: Many amino dicarboxylates show decomposition upon heating rather than sharp boiling transitions (literature).
Recommendation
For precise properties used in method development (e.g., HPLC retention, DSC/TGA onset), consult the item-specific CoA and SDS. Empirical small-scale solubility screening (water, buffered saline at varying pH, MeOH/H2O mixtures) is advisable before scaling.
Quality and Grades
Item-specific grade/purity is not listed in the current product data.
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
General guidance on grades (context for small-molecule libraries)
Research grade: Suitable for discovery chemistry, assay development, and mechanistic studies. Purity typically assessed by HPLC/UPLC and NMR; exact thresholds vary by supplier/spec.
Screening/compound library entries: Often provided with QC documentation (LC-MS purity, HRMS or NMR confirmation). If your application is sensitive (e.g., electrophysiology), request detailed impurity profiles and counterion information.
Stabilizers/additives: Amino dicarboxylic acids are typically shipped neat without stabilizers; if a salt form or hydrate is provided, this should be clearly indicated on the CoA.
What to look for on the CoA
Identity confirmation (1H/13C NMR, MS, elemental analysis as applicable).
Purity method and detection wavelength(s) used for HPLC/UPLC.
Water content (KF) if relevant to your protocol; if critical, request lot-specific value.
Residual solvent levels (GC) and salt/counterion content if supplied as a salt.
Note: Match the listed CAS and stereochemical designation (trans) with the CoA to ensure you receive the intended isomer.
Reaction and Applications
Use-cases depend on whether you employ the free acid/zwitterion in bioassay or derivatize it for synthesis.
Research applications (general/literature)
Neurochemical probe: trans-aminocycloalkane dicarboxylates have been used as conformationally restricted glutamate analogues to interrogate excitatory amino acid transporters (EAATs) and receptors in vitro (research use only).
Reference tool: Useful as standards or controls for transporter uptake assays, binding studies, and structure–activity relationship work.
Synthetic/derivatization applications (general)
Protection strategies: Boc/Fmoc protection of the amine and esterification (Me/Et) of carboxyls enable coupling into peptidomimetics and prodrugs.
Coupling: HATU/HBTU/EDC-mediated couplings to amines; mixed anhydride or acid chloride routes after protection.
Chiral resolution/confirmation: Diastereomeric salt formation or chiral HPLC to confirm “trans” configuration.
Practical tips
Weigh rapidly under low humidity to minimize water uptake if hygroscopic (check CoA).
For bioassays, prepare fresh aqueous stocks, filter-sterilize (0.22 µm) if sterility is required, and document pH.
For analytics, derivatize (e.g., OPA, FMOC-Cl) to enhance UV/fluorescence detection if direct detection is weak.
Item-specific application notes from manufacturer: Not provided in this listing; consult the product page or contact Aladdin Scientific for assay examples.
Reaction Conditions
The listing provides no item-specific reaction parameters. The following are general, literature-informed conditions relevant to amino-dicarboxylate chemistry:
Amide couplings: HATU (1.0–1.2 eq), DIPEA (2–3 eq) in DMF/MeCN or mixed aqueous media; 0–25 °C, 0.5–16 h. Monitor by LC-MS.
Esterifications: For fully protected substrates, MeOH/HCl (Fischer) at ambient–reflux or DCC/DMAP in CH2Cl2; durations vary by sterics.
Protecting group installs: Boc2O (1.1–1.5 eq) with NaHCO3/triethylamine in dioxane/water; Fmoc-OSu in aqueous Na2CO3/acetone-water.
Deprotections: Boc removal with TFA in CH2Cl2 at 0–25 °C; benzyl esters via hydrogenolysis (H2/Pd-C) under mild conditions.
Analysis and QC
Employ 1H/13C NMR in D2O or DMSO-d6 (pH adjusted) to assess coupling completion and integrity of stereochemistry.
Use chiral or ion-exchange HPLC to track diastereomeric purity and salt content when relevant.
Note: Conditions should be optimized to the exact structure and protecting pattern of your material. Start with small-scale trials and consult the CoA/SDS for stability constraints. No yield expectations are provided for this specific item.
Safety and Handling
Authoritative safety information must be taken from the product SDS. The listing does not include item-specific hazard classification.
Item-specific hazard data
GHS Classification: Not specified for this item; refer to SDS.
Signal Word: Not specified for this item; refer to SDS.
Hazard (H) statements: Not specified for this item; refer to SDS.
Pictograms: Not specified for this item; refer to SDS.
General laboratory precautions for amino acid–like zwitterionic solids (informational)
PPE: Wear lab coat, safety glasses, and appropriate chemically resistant gloves. Avoid inhalation of dust and contact with skin/eyes.
Handling: Use in a well-ventilated area or fume hood. Minimize dust generation. For weighing, use antistatic measures and a clean spatula.
Incompatibilities: Strong oxidizers and strong mineral acids/bases may cause degradation; avoid prolonged exposure to extremes of pH unless intended (general guidance).
First aid (overview): If on skin/eyes, rinse with water for several minutes; if inhaled, move to fresh air; if ingested, rinse mouth with water. Seek medical advice; provide the SDS to responders.
Spills: Collect solids with minimal dusting; for aqueous spills, absorb with inert material. Dispose of in accordance with institutional and local regulations.
Special notes
No evidence of peroxide formation or flammability concerns typical of volatile organic solvents; nonetheless, standard hygiene and contamination control are required.
Solvent Selection
This product is a small, polar, amino-dicarboxylate–type compound (by naming convention). Solvent choice hinges on ionic state and intended use.
General recommendations (literature/context)
Aqueous systems: Most practical for dissolution; adjust pH with NaOH/KOH or appropriate buffers to form soluble carboxylates while controlling the amine protonation state.
Mixed solvents: Water with methanol, ethanol, or DMSO can facilitate stock solutions; limit DMSO in biological assays to ≤1–2% v/v final.
Nonpolar solvents: Typically poor solubility; generally not recommended unless converting to protected derivatives.
Polarity and miscibility (general)
Predominantly hydrophilic; favors water and polar protic solvents.
For analytical injections, aqueous mobile phases with ion-pairing or low-strength organic modifiers may be needed to control retention.
When to choose alternatives
If strictly anhydrous conditions are required (e.g., for coupling steps), prepare protected derivatives (Boc/Fmoc on amine, esterified acids) soluble in organic solvents.
For membrane-permeation studies where low solubility is limiting, consider salt screening (e.g., sodium/potassium salts) or co-solvent systems.
Item-specific solubility data: Not specified for this item; refer to CoA/Spec Sheet. Validate solubility experimentally at your working pH/ionic strength.
Storage and Reconstitution
Provided item-specific conditions
Storage: Store at −20 °C (as provided in product data).
Shipping: Shipped in ice chest with ice pads.
Research Use Note: For research use only.
General handling guidance for amino-dicarboxylate solids
Upon receipt: Allow the sealed container to equilibrate to room temperature before opening to minimize condensation. Reseal promptly after use.
Long-term storage: Keep tightly closed in a dry, inert atmosphere if possible. Protect from repeated freeze–thaw of aqueous solutions by preparing single-use aliquots.
Reconstitution (general recommendations)
Solvent: Use water or appropriate buffer. Adjust pH (e.g., with NaOH) to improve solubility if needed. Record final pH and ionic strength.
Concentration: Determine empirically based on solubility and intended application; item-specific solubility Not specified for this item; refer to CoA/Spec Sheet.
Sterility: For cell-based work, 0.22 µm filter-sterilize freshly prepared solutions.
Stability notes
Aqueous solutions are generally more prone to degradation than the solid. Store solutions at −20 °C in aliquots, avoid light exposure when possible, and discard if precipitation, discoloration, or pH drift is observed.
Always defer to the lot-specific CoA/SDS for definitive storage and stability guidance.
Structure and Identity
This item is listed as “trans-ACBD.” In research literature, the shorthand “t‑ACBD” commonly refers to a trans-configured aminocyclobutane dicarboxylic acid (a conformationally restricted glutamate analogue). However, the definitive structural identifiers for this SKU are not provided here.
Item-specific identifiers
CAS: 117488-23-0 (as provided) — verify against the CoA for exact synonym mapping.
Molecular formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular weight: Not specified for this item; refer to CoA/Spec Sheet.
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
InChIKey: Not specified for this item; refer to CoA/Spec Sheet.
Structural features (general/literature context)
“trans-ACBD” naming typically denotes a bicyclic or cycloalkyl amino dicarboxylate framework with a defined trans stereochemistry at substituents on a small ring (literature), frequently used as a glutamatergic system probe.
Functional groups (literature/general): primary amine (zwitterionic at neutral pH), two carboxylic acids (or carboxylates), chiral centers defining trans relationship.
2D description in words (general)
A four-membered (cyclobutane) ring bearing one amino substituent and two carboxyl-derived substituents arranged in a trans relationship across the ring carbons (literature). Please cross-check the exact ring positions and stereodescriptors on the product CoA to ensure alignment with this SKU.
Important note
Where exact identifiers are required for regulatory filings or spectral assignment, rely on the item’s CoA/SDS/Spec Sheet rather than generalized literature shorthand.
Synthetic Utility
From a synthetic standpoint (general/literature), a trans-aminocycloalkyl dicarboxylate offers multiple handles:
Bifunctional acid component: Two carboxyl groups enable divergent coupling to distinct amines/alcohols, facilitating linker elaboration and dendritic growth.
Chiral amine: After protection (Boc/Fmoc/CBz), the amine participates in peptide couplings, urea/thiourea formations, or reductive aminations (post-decarboxylation strategies).
Conformational constraint: The cyclobutane ring embeds rigidity into peptidomimetics, often improving receptor selectivity in SAR campaigns.
Carbodiimide-mediated couplings (EDC/HOBt, HATU/HBTU) to form amide linkages.
Ester formation via Fischer or Mitsunobu conditions (on protected frameworks).
Late-stage deprotections: Hydrogenolysis (CBz/Bn esters) or acidolysis (Boc) under conditions compatible with the ring system.
Caveats
Small-ring strain can influence reactivity and stability; avoid harsh conditions that promote ring opening.
Optimize base strength to prevent epimerization at stereocenters; use mild bases and low temperatures during coupling.
Item-specific reactivity data: Not specified for this item; confirm with small-scale trials and analytical monitoring (LC-MS/NMR).
Target Specificity
No target specificity data are provided for this SKU (e.g., no transporter, receptor, antibody, or enzyme specificity metrics).
General/literature context
Compounds in the trans-aminocycloalkane dicarboxylate class are often examined as substrates or inhibitors of excitatory amino acid transporters (EAATs) or as conformationally restricted glutamate analogues in receptor/transporter studies. However, no item-specific Ki/IC50/EC50 values or selectivity profiles are available here.
For project planning
If you require defined activity/selectivity data, request literature references and lot-level QC or consider running a small pilot screen (e.g., uptake assays in EAAT-expressing cells) to establish internal benchmarks.
Foire aux questions
How should this product be stored?
Store at ?20 °C. Freezer storage is required to maintain the specified shelf life.
How is this product shipped?
This product ships in an insulated container with ice pads. Unpack on arrival and transfer it to the storage condition stated above.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 117488-23-0, the molecular formula is C6H9NO4, and the molecular weight is 159.14 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Nous utilisons des cookies pour garantir le bon fonctionnement du site et, lorsque cela est autorisé, pour améliorer votre expérience. Vous pouvez gérer vos préférences à tout moment dans les Paramètres. Pour en savoir plus, consultez notre Politique relative aux cookies.
Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?
Me rappeler plus tard
Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.