Trypan Blue Staining Solution (5%) - BioReagent

Cat. No.: T1528888
DISPONIBLE À COMMANDE
QUALITÉ & PURETÉ BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
Storage
Store at 2-8°C
Shipped In
Wet ice
★
Taille
Allemagne (EU)
USA*
Prix
Qté
50ml
T1528888-50ml
Sur commande · 8–12 semaines
86,69€
100ml
T1528888-100ml
Sur commande · 8–12 semaines
138,75€
Enter a quantity for the sizes you want to add.

Vue d’ensemble

Trypan Blue is an anionic active dye and the most commonly used reagent for identifying dead cells in cell and tissue culture. The staining principle is based on the fact that viable cells possess intact membranes that exclude the dye, preventing its entry; whereas cells that have lost viability or membrane integrity exhibit increased permeability, allowing Trypan Blue to penetrate and stain the cells blue to pale blue. This enables a simple and rapid distinction between live and dead cells. Trypan Blue can also be phagocytosed by macrophages, making it applicable for in vivo macrophage staining. After staining, cell viability can be quantified by direct microscopic counting or image-based counting, using the formula: Cell Viability (%) = (Total Cells − Blue-Stained Cells) ÷ Total Cells × 100%. The procedure is straightforward, requiring only 3–5 minutes of staining at room temperature. Note: Prolonged staining should be avoided, as extended incubation may lead to dye uptake by viable cells, resulting in underestimated viability. Trypan Blue is potentially toxic and classified as a suspected carcinogen; appropriate personal protective equipment (lab coat and disposable gloves) should be worn during handling. For research use only. Not for clinical diagnosis.

Spécifications

Spécifications et pureté
BioReagent
Conditions de stockage de stockage
Store at 2-8°C
Expédié en
Wet ice
Ce produit nécessite l'expédition en chaîne froide. Les services terrestres et autres services économiques ne sont pas disponibles.
Grade
BioReagent
Product Line
Produits biologiques

Données avancées

Certificats (CoA, COO, BSE/TSE et tableau d'analyse)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Calculateurs de solution
Avis

Avis des clients

Application Protocols

Manufacturer-tested applications, recommended dilutions, and step-by-step protocols are not provided for this item. Refer to the product CoA/Spec Sheet and SDS for any item-specific handling notes.

General literature guidance (not item-specific; validate in your lab):

  • Prepare the cell suspension in an appropriate isotonic buffer or medium.
  • Mix an aliquot of the 5% stock with the cell suspension to achieve a common final dye concentration (e.g., 0.2–0.4%). Gently pipette to mix.
  • Incubate briefly (about 1–3 minutes) at room temperature.
  • Load onto a hemocytometer and count under brightfield; score blue-stained cells as non-viable.
  • Calculate viability: viable (%) = 100 × [1 − (non-viable/total)].

Note: The above is provided for context only and does not replace manufacturer instructions. Optimize parameters (dilution, incubation time) per cell type and application.

Biological Roles

Trypan Blue is not a biomolecule and does not play a physiological role. Its relevance in biology stems from its interaction with cellular membranes in viability assays.

  • Principle (general): Trypan Blue is excluded by cells with intact plasma membranes. Cells with compromised membranes (non-viable) permit dye entry, staining the cytoplasm dark blue. This differential permeability underpins the classic dye-exclusion test.
  • Membrane integrity readout: The assay reports on late-stage cell death events (loss of membrane integrity) rather than early apoptotic signaling; thus, it may underestimate early apoptosis relative to annexin V or mitochondrial potential assays.
  • Compatibility: Widely applicable to many cultured mammalian and microbial cells in suspension; adherent cells require detachment prior to staining. Highly pigmented cells or debris can confound visualization.
  • Interferences (general):
    • High protein or serum content may alter background coloration.
    • Extreme pH/osmolarity can affect cell integrity during mixing, biasing viability estimates.
  • Comparison to fluorescent viability dyes: Non-fluorescent and read by brightfield microscopy, enabling rapid, low-cost assessments without specialized optics; however, it is less sensitive and not multiplexable with fluorescence-based readouts.

Note: These are general, literature-based characteristics of Trypan Blue as a reagent. This product is a 5% aqueous solution intended for research use only.

Buffer Applications

This product is a staining solution, not a buffering agent. It does not serve as a primary pH buffer system. For viability assays, it is typically mixed with cell suspensions prepared in appropriate isotonic buffers or media. If buffer composition (pH, osmolarity) is critical to your assay, consult the item’s CoA/Spec Sheet for any formulation details or prepare dilutions in a validated buffer (e.g., balanced salt solution) suitable for your cells.

Green Alternatives

Context: This product is an aqueous dye solution; environmental considerations focus on hazard profile, waste minimization, and substitution with dyes of lower toxicological concern where feasible.

Potential alternatives (general literature; selection depends on detection method):

  • Erythrosin B or Evans Blue (non-fluorescent, visible dyes) — may offer different hazard profiles; verify performance and safety data.
  • Propidium iodide (PI), 7-AAD, SYTOX dyes (fluorescent membrane-impermeant probes) — enable lower working concentrations and sensitive detection, but introduce fluorescence waste streams and require specialized instrumentation.
  • Trypan Red or Acid Blue variants — structural analogs with different regulatory and safety statuses; evaluate case-by-case.

Sustainability and safety trade-offs:

  • Aqueous matrices avoid volatile organic compounds; minimize solvent emissions.
  • Some azo dyes have concerning toxicology; consider switching to non-azo alternatives if acceptable for your assay.
  • Fluorescent probes can reduce dye mass used but may increase EHS complexity due to mutagenicity warnings for intercalating dyes.

Operational “greener” practices:

  • Prepare only the volume needed for the session to limit waste.
  • Segregate dye-containing aqueous waste for proper disposal; avoid drain disposal unless permitted by local regulations.
  • Use refillable dispensing bottles and secondary containment to prevent spills and staining.

Note: Selection of alternatives must balance safety, assay performance, and instrument availability.

Pharmaceutical Uses

Not applicable. This product is supplied as a laboratory staining solution for research use only and is not intended for pharmaceutical formulation, clinical diagnostics, or therapeutic applications. No pharmacopeial monograph or excipient status is claimed for this item. For any process-related or regulated use, obtain detailed specifications and regulatory documentation; otherwise, restrict use to non-clinical laboratory research.

Physical Properties

Item-specific properties (5% aqueous solution):

  • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
  • Density, pH, refractive index, osmolarity: Not specified for this item; refer to CoA/Spec Sheet.
  • Solubility: Freely miscible with water (general for aqueous solutions). Compatibility with organic solvents is limited and not typically relevant to use.

Literature properties for the dye (general, not item-specific specifications):

  • Form: Deep blue, water-soluble anionic diazo dye (typically supplied as sodium salt)
  • Aqueous solubility (dye): High due to multiple sulfonate groups (qualitative, literature)
  • LogP (octanol/water): Not commonly reported; ionic character suggests very low partition into nonpolar phases (qualitative, literature)
  • pKa: Not typically applicable; the dye is present as sulfonate salts (strong acids fully dissociated in water) (literature)
  • UV-Vis: Broad absorption in the visible region with λmax typically around the blue/orange complementary range (literature qualitative; exact λmax depends on ionic strength and pH)

Practical notes:

  • Because the product is a prepared aqueous solution, boiling/melting points and precise physical constants are generally not relevant to routine use. For assay-critical parameters (pH, conductivity, ionic strength), consult the item’s CoA/Spec Sheet.
Quality and Grades
  • Grade: BioReagent

    • Meaning: BioReagent grade denotes suitability for common biochemical and cell biology workflows, emphasizing consistency, low bioburden/endotoxin where applicable, and performance in standard lab assays. It does not imply clinical/diagnostic suitability.
    • Implication for this item: Prepared as a staining solution for viability/exclusion assays and microscopy/counting tasks in research settings.
  • Purity/assay details: Not specified for this item; refer to CoA/Spec Sheet.

  • Stabilizers/preservatives: Not specified for this item; refer to CoA/Spec Sheet.

  • UV-Vis or absorbance profile control: Not specified for this item; refer to CoA/Spec Sheet.

  • Batch-to-batch consistency: For colored indicators/dyes, consistent absorbance at a defined pathlength and concentration is critical for reproducibility. BioReagent grade is typically controlled for color strength and solution clarity; verify with the lot-specific CoA.

  • Suitability notes:

    • Intended for research use only (as stated). Not for diagnostic or therapeutic use.
    • If your workflow is sensitive to ionic strength or endotoxin, confirm these parameters on the CoA or request additional testing.
Reaction and Applications

Primary use: Trypan Blue Staining Solution (5%) is used for cell viability assessment via dye-exclusion. Intact cellular membranes exclude the dye; compromised membranes allow uptake, yielding blue-stained non-viable cells.

Key application domains (research use):

  • Manual cell counting with hemocytometers (e.g., improved Neubauer) to quantify total and non-viable cells.
  • Rapid viability checks during cell culture workflows (thawing, passaging, transfection setup, seeding for assays).
  • Assessment of cytotoxic effects of treatments in basic research.

Working concentration guidance (general, literature-based; not item-specific instructions):

  • Common final working concentrations are around 0.2–0.4% Trypan Blue. With a 5% stock, this typically corresponds to ~1:12.5 to 1:25 dilutions into the cell suspension or buffer. Adjust based on cell type and counting method.

Practical considerations:

  • Mix gently and incubate briefly (e.g., 1–3 minutes) to allow dye exclusion to equilibrate; prolonged exposure can increase background or affect cell integrity (general observation).
  • Avoid CO2-independent media with extreme pH or high protein content that can alter color perception; perform counts promptly after mixing.
  • For adherent cells, detach carefully to avoid membrane damage that could inflate non-viable counts.
  • Validate the dye-to-cell suspension ratio for your specific cell type and density to prevent under- or over-staining.

Note: No manufacturer application details were provided for this SKU beyond research use. Optimize conditions empirically and consult the CoA/SDS for any item-specific constraints.

Reaction Conditions

Not applicable in the sense of chemical reactions. This product is used in biological staining workflows rather than as a reactant or catalyst. For practical use conditions in viability assays (incubation times, dilution ratios), see the Reaction & Applications section (general literature guidance) and verify with your internal SOPs. No manufacturer-validated reaction conditions are provided for this SKU.

Safety and Handling

Safety classification for this specific item:

  • GHS classification, signal word, pictograms, and H-statements: Not specified for this item; refer to SDS.

General safety information (literature/typical for trypan blue solutions; consult SDS for authoritative guidance):

  • Hazards: Trypan Blue is a synthetic azo dye; some sources flag potential mutagenic/carcinogenic concerns in certain test systems. Treat as a hazardous laboratory chemical. Avoid inhalation, ingestion, and skin/eye contact.
  • PPE: Use lab coat, gloves (nitrile recommended), and safety glasses or face shield when splashes are possible.
  • Engineering controls: Handle in a well-ventilated area; use a fume hood for procedures generating aerosols or splashes.
  • First aid (general):
    • Skin: Remove contaminated clothing; wash with soap and water.
    • Eyes: Rinse cautiously with water for several minutes; remove contact lenses if present and easy; continue rinsing.
    • Ingestion/Inhalation: Seek medical attention; provide SDS to responders.
  • Handling notes:
    • Dye can cause persistent staining of skin, benchtops, and instruments; protect work surfaces.
    • Avoid mixing with strong oxidizers and strong acids/bases unless validated.
    • Prevent environmental release; collect liquid waste in appropriately labeled hazardous waste containers.
  • Fire safety: Aqueous solutions are not readily flammable; however, packaging and dried residues may burn. Use extinguishing media suitable for surrounding materials.

Always defer to the product-specific SDS and institutional safety procedures.

Solvent Selection

Applicability: This product is itself an aqueous staining solution; solvent selection primarily concerns compatibility of the solution with your sample matrix.

  • Polarity/miscibility: Water-based; fully miscible with aqueous buffers and saline. Mixing with organic solvents is not typical and may precipitate dye or alter staining behavior.
  • Buffer compatibility (general): Commonly combined with isotonic saline or balanced salt solutions during cell counting to maintain osmotic balance. Specific buffer composition for this item is not specified; verify compatibility with your cells or samples.
  • When to choose this product: When a high-strength stock solution (5%) of Trypan Blue is required for flexible dilution to working concentrations for dye-exclusion assays.
  • Alternatives and considerations:
    • Lower-percentage ready-to-use solutions can simplify workflow but reduce flexibility in achieving custom final dye concentrations.
    • DNA-intercalating or membrane-impermeant fluorescent dyes (e.g., propidium iodide, SYTOX family) may be preferred for flow cytometry or fluorescence microscopy, but they require different detection modalities.

Practical tips:

  • Avoid introducing significant volumes of the 5% solution into delicate biological systems without adjusting for osmolarity; prepare appropriate dilutions in isotonic media or buffer as needed.
  • Filter-compatibility: If sterile conditions are required, use low-protein-binding 0.22–0.45 μm filters; note that dye adsorption to some membranes can occur.
Storage and Reconstitution
  • Storage conditions (item-specific): Store at 2–8°C (from Product Data). Protect from light to minimize photodegradation and color changes. Do not freeze unless the CoA explicitly supports freeze–thaw stability.
  • Shipping: Shipped on wet ice (from Product Data).
  • Stability/shelf life: Not specified for this item; refer to CoA/Spec Sheet.
  • Preservatives/bioburden: Not specified for this item; refer to CoA/Spec Sheet.
  • Reconstitution: Not applicable — supplied as a ready-to-use 5% aqueous solution. Mix by gentle inversion before use to ensure homogeneity; avoid vigorous shaking that can introduce bubbles and complicate counting.
  • Packaging/handling:
    • Store tightly closed to prevent evaporation and contamination.
    • If sterility is required for your workflow, aseptically dispense and consider sterile filtration (0.22–0.45 μm) into sterile containers; confirm that filtration is compatible with the dye.
    • Record first open date; follow good laboratory practice for in-use dating based on your quality system.

Always consult the lot-specific CoA and SDS for definitive storage guidance and stability information.

Structure and Identity

Overview: This product is an aqueous Trypan Blue Staining Solution at 5% concentration (basis not specified by supplier). Trypan Blue is a diazo anionic dye commonly used for cell viability assessment by dye-exclusion.

  • Product form: Ready-to-use aqueous staining solution (5%)
  • Active component: Trypan Blue dye (literature identity below)
  • Concentration basis: Not specified for this item; refer to CoA/Spec Sheet.
  • CAS, SMILES, InChIKey (item): Not specified for this item; refer to CoA/Spec Sheet.

Literature identity for the dye (general reference, not item-specific):

  • Common name: Trypan Blue (Direct Blue 14)
  • Molecular formula (dye, literature): C34H24N6Na4O14S4
  • Molecular weight (dye, literature): ~960.8 g/mol (tetra‑sodium salt)
  • Structural features (dye):
    • Bis-azo chromophore linking two substituted naphthalene sulfonate rings
    • Four sulfonate groups (as sodium salts) confer high water solubility and anionic character
    • Extensive conjugation across azo linkages affords intense blue color
  • 2D description (dye): Two naphthalene rings each bearing sulfonate and amino substituents are connected via two –N=N– azo bridges to a central diaminodiphenyl core, forming a symmetric, highly conjugated anionic structure.

Note: The above structural data pertain to the dye itself (literature) and are provided for context; the sold item is a 5% aqueous staining solution.

Synthetic Utility

Not applicable. Trypan Blue Staining Solution (5%) is a prepared aqueous dye solution used for biological staining and does not serve as a synthetic building block or reagent in organic or inorganic synthesis. For synthetic chemistry applications requiring azo dyes or sulfonated aromatics, procure solid dye intermediates or specific reagents intended for synthesis.

Target Specificity

Not applicable. This product is not an antibody, probe with defined molecular target, nor a ligand with specified receptor selectivity. Its functional readout is based on exclusion from intact cells and uptake by membrane-compromised (non-viable) cells.

Besoin d'aide pour choisir la qualité ?

Notre guide de sélection des qualités couvre la pureté, le statut du stabilisant et l'adéquation à l'application pour toutes les variantes de notre catalogue.

Voir le guide des qualités BioReagent →

Souhaitez-vous que nous vous envoyions un message lorsque des réductions seront disponibles?

Me rappeler plus tard

Merci ! Veuillez vérifier votre boîte de réception e-mail pour confirmer.

Oups ! Les notifications sont désactivées.