Chromium etchant - standard

Cat. No.: C476102

GRADE & PURITY standard

Storage

Room temperature

Descripción general

Chromium etchant is a chromium based solution that removes the excess metal from the substrate. These etchants are majorly used in metal finishing and electronic industry. It has an etch rate of 4 mm/s and can be used to etch nickel, copper, and chromium based excess metals.Ceric ammonium nitrate-based etchant. Etch rate of 40 Å/sec @ room temp. Etches cleanly with only a deionized water rinse needed.The product can etch Al, Cr, Cu, Ni, GaAs. It can surface oxidize Si, Ta/TaN, however, it has no effect on Au, Si3N4, SiO2, Ti, and W surfacesFor use at room temperature or elevated temperature. Etches cleanly, eliminating need for an intermediate rinse. Etching temperature varies with regard to film thickness. Etch times range from 15 to 60 seconds at room temperature. Note, chromium etchants should be handled in a well ventilated hood.

Characteristic

High purity; 0.2 micron filtration; Excellent photoresist compatibility; Uniform etch rates and patterns.

Specifications

Especificaciones y pureza

standard

Condiciones de almacenamiento de almacenamiento

Room temperature