2,7-Dimethoxynaphthalene was employed as matrix to investigate the structure of polymetallic porphyrins via matrix-assisted laser desorption/ionization. It was also used in the synthesis of: peri-aroylnaphthalene compounds via elective electrophilic aromatic aroylation 2-amino-1,2,3,4-tetrahydronaphthalene-6,7-diol
This compound belongs to the class of organic compounds known as naphthalenes. These are compounds containing a naphthalene moiety, which consists of two fused benzene rings.
External Descriptors
Not available
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Bewertungen
Kundenbewertungen
Application Protocols
No assay protocols are item-specific for this small-molecule reagent. For synthetic applications, see the Reaction Conditions and Synthetic Utility sections for general literature procedures (e.g., demethylation, electrophilic substitution, cross-coupling on derived halides). For materials work (thin films), typical solution processing uses 1–10 mg/mL in CHCl3, toluene, or 2-MeTHF with filtration through 0.2 µm PTFE prior to casting (general guidance). Always optimize to your system.
Biological Roles
Scope: 2,7-Dimethoxynaphthalene is a synthetic aromatic ether and does not have a known endogenous biological role.
General considerations (literature/chemistry-focused):
Bioactivity: Simple methoxylated naphthalenes can interact with lipid environments owing to hydrophobicity and π-systems, but 2,7-dimethoxynaphthalene is primarily used as a chemical/materials intermediate rather than a biochemical probe.
Metabolic susceptibility: In biological systems, aryl methyl ethers may undergo O-dealkylation by cytochrome P450 enzymes to phenols; subsequent conjugation (glucuronidation/sulfation) increases clearance. These are general pathways for anisole-like structures.
Spectroscopy: Exhibits aromatic fluorescence, which can be leveraged qualitatively in studies of hydrophobic binding environments, though more specialized fluorophores are typically preferred.
Note: Any biological testing should adhere to local regulations for research chemicals. No medical or clinical claims are implied, and this product is supplied strictly for research use only.
Buffer Applications
Not typically applicable. 2,7-Dimethoxynaphthalene is a hydrophobic aromatic ether, not a buffering agent and lacks acid/base functionality in the physiological range. For experimental work, select a buffer compatible with your downstream transformation (e.g., avoid aqueous buffers during Lewis-acid demethylation).
Green Alternatives
Opportunities to improve sustainability when working with 2,7-dimethoxynaphthalene (general guidance):
Solvent substitution:
Replace DCM/CHCl3 for routine dissolution or chromatography with 2-MeTHF, CPME, or toluene/ethyl acetate systems when feasible.
For high-temperature EAS, consider anisole or mesitylene as lower-toxicity aromatic solvents versus chlorinated aromatics.
Demethylation chemistry:
Classical BBr3/CH2Cl2 is effective but hazardous. Alternatives include AlCl3 with thiols (less volatile halogenated waste) or catalytic demethylation using iodide in ionic liquids; evaluate performance vs waste profile.
Oxidative demethylation strategies (e.g., DDQ or benign oxidants under photoredox) may be applicable but often require optimization; assess total E-factor.
Energy and workup:
Use flow chemistry for exothermic demethylations to improve heat transfer and reduce solvent volumes.
Favor crystallization-based isolations over silica chromatography to cut solvent usage.
Comparison snapshot (general):
DCM/BBr3: High efficacy; low temp; high hazard and halogenated waste.
2-MeTHF/AlCl3–thiol: Moderate efficacy; ambient to reflux; odorous thiols, Al waste.
Choose the option balancing safety, regulatory context, and performance for your application.
Pharmaceutical Uses
This product is offered for research use only. It is not an approved excipient or active ingredient specification in this listing.
General context (non-clinical):
Synthetic intermediate: Methoxylated naphthalenes can serve as intermediates toward phenolic naphthalenes, which are then elaborated into ligands, dyes, or polymeric materials relevant to device fabrication or discovery chemistry.
Materials/formulation R&D: The compound’s aromaticity and electron-donating substituents can be useful in studying structure–property relationships (solubility, glass transition in blends) in non-biological formulations.
No therapeutic or clinical usage is stated or implied. Consult regulatory guidance before any use beyond laboratory research.
Physical Properties
Item-specific specifications:
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Literature/general properties (for reference only; not item-specific specifications):
Aggregate state: Typically a crystalline aromatic ether solid.
Volatility: Low (aromatic dialkyl ether); sublimation not prominent under ambient conditions.
Solubility profile (qualitative):
Poorly soluble in water (aromatic ethers are generally hydrophobic).
Soluble in common organic solvents such as dichloromethane, chloroform, toluene, THF, and hot alcohols (literature/general behavior of dimethoxynaphthalenes).
Acid-base: Neutral compound; no ionizable groups in the physiological pH range.
UV/fluorescence: Exhibits aromatic UV absorption and faint blue fluorescence typical of naphthalene derivatives (qualitative, literature behavior).
Notes:
For exact melting point, boiling point, density, water/peroxide/metal limits, and refractive index for this specific lot, please consult the product CoA/SDS. We do not state item-specific numerical specs here unless explicitly provided.
Quality and Grades
Item-specific grade/purity:
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Guidance (general):
Research grade aromatic building blocks such as 2,7-dimethoxynaphthalene are commonly supplied at high chemical purity suitable for synthesis and materials research. If your application is chromatography-sensitive (e.g., OLED emissive layer studies, photophysics), consider requesting low-UV/low-fluorescent impurity data.
Stabilizers: Not typically required for this compound; it is an air-stable aromatic ether. If any stabilizer is used for a specific lot, it will be disclosed on the CoA/SDS.
Trace analysis: For metal-catalyzed couplings downstream, residual metals and halides in this starting material are usually minimal; however, if ppm-level specs are critical, request elemental analysis (ICP-MS) on the lot you purchase.
Documentation: A detailed CoA will provide assay, identification (NMR/IR/HRMS), and impurity profile. For photonic applications, ask for residual polycyclic aromatic hydrocarbon content and water content if processing in moisture-sensitive steps.
Bottom line: Use the CoA/Spec Sheet for lot-specific acceptance criteria. Contact technical support for HPLC/GC trace data or material qualification needs.
Reaction and Applications
Focus: 2,7-Dimethoxynaphthalene is an electron-rich, symmetrical aryl diether useful as a precursor to 2,7-dihydroxynaphthalene and as a scaffold for functional organic materials.
Representative applications (literature/general):
O-Demethylation to diol: Conversion to 2,7-dihydroxynaphthalene using BBr3, BCl3/thiols, AlCl3/thiophenol, or HI/AcOH systems. The diol is a versatile intermediate for diester/diaryl ether formation and polymer monomers (e.g., naphthalene-based polyesters or polyarylates).
Electrophilic aromatic substitution (EAS): Methoxy groups activate the naphthalene ring, directing ortho/para to each OMe. Nitration, sulfonation, and Friedel–Crafts acylations can be executed with regioselectivity influenced by the 2,7-pattern.
Cross-coupling on pre-functionalized analogs: Bromination/iodination at positions activated by OMe allows subsequent Suzuki, Buchwald–Hartwig, or Kumada couplings to build conjugated systems (OLED/OPV building).
Oxidations: Stepwise oxidation toward naphthoquinone frameworks after demethylation (via diol to quinone transformations) for redox-active materials.
Materials science: Useful as a donor-rich unit in organic semiconductors and fluorescent probes; methoxy groups tune HOMO/LUMO and enhance solubility.
Practical tips:
Maintain anhydrous conditions for Lewis-acidic demethylation; employ slow addition at low temperature to control exotherm.
For EAS, control temperature to avoid over-substitution; monitor regioisomer distribution by 1H NMR (OMe singlets as diagnostics).
Purification: Recrystallization from toluene/ethanol or column chromatography on deactivated silica (trace base) to minimize demethylation on acid sites.
Reaction Conditions
General literature conditions (guidance only; not item-specific):
O-Demethylation to 2,7-dihydroxynaphthalene:
Reagent: BBr3 (1.5–3.0 equiv per OMe) in anhydrous CH2Cl2.
Temperature: −78 to 0 °C for addition; then 0–25 °C for 2–16 h.
Workup: Careful MeOH/H2O quench at 0 °C; extract; neutralize.
Typical outcome: High conversion to diol with minimal overbromination when rigorously anhydrous (literature).
Alternative demethylation:
HI (57%) in AcOH or sealed-tube conditions at 80–120 °C (longer times; halide waste stream).
AlCl3 (3–6 equiv) with thiophenol or ethanethiol in DCM or toluene; 0–25 °C to reflux.
Electrophilic substitution:
Nitration: Mild mixed-acid at 0–25 °C affords regioisomeric nitro derivatives; control equivalents and temperature to limit polysubstitution.
Friedel–Crafts acylation: Acyl chloride/AlCl3 in DCM or nitrobenzene; 0–80 °C depending on acyl reactivity.
Cross-coupling on pre-halogenated derivatives:
Suzuki–Miyaura: Pd(PPh3)4 or Pd(dppf)Cl2; base (K2CO3, Cs2CO3); solvent (dioxane/H2O, toluene/EtOH/H2O, or 2-MeTHF/H2O); 60–110 °C.
Buchwald–Hartwig amination: Pd2(dba)3 or Pd(OAc)2 with BINAP/BrettPhos; NaOtBu or Cs2CO3; toluene/1,4-dioxane; 80–110 °C.
Note: Conditions vary with substrate and scale. Monitor by TLC/UPLC and confirm identity by NMR/HRMS.
Safety and Handling
Item-specific hazard data:
Signal Word: Not specified for this item; refer to SDS.
H-Statements: Not specified for this item; refer to SDS.
GHS Classification/Pictograms: Not specified for this item; refer to SDS.
General safety guidance for aromatic ethers (literature/typical):
Likely hazards: May cause skin/eye irritation and respiratory irritation as dust; harmful if swallowed is possible for polyaromatic ethers. Non-volatile but combustible organic solid.
PPE: Use lab coat, safety goggles, and suitable gloves (e.g., nitrile). Handle solids in a fume hood to minimize dust inhalation.
Incompatibilities: Strong oxidizing agents; strong Lewis/Brønsted acids can cleave aryl methyl ethers under forcing conditions (e.g., BBr3, HBr).
Fire safety: Combustible; use CO2, dry chemical, or foam. Avoid dust accumulation near ignition sources.
First aid (overview; defer to SDS):
Inhalation: Move to fresh air; seek medical attention for persistent symptoms.
Skin: Wash with soap/water; remove contaminated clothing.
Eyes: Rinse cautiously with water for several minutes; seek medical advice if irritation persists.
Ingestion: Rinse mouth; do not induce vomiting; seek medical attention.
Always consult the product SDS for authoritative hazard classifications, exposure limits, and spill/fire response procedures.
Solvent Selection
Applicability: As a nonpolar-to-moderately polar aromatic ether solid, solvent choice affects dissolution, crystallization, and reaction setup.
General solvent behavior (literature/typical):
Polarity class: Nonpolar aromatic ether; π-stacking favored; no H-bond donors.
Limited: Hexanes (improves with heat), acetonitrile (varies with temperature).
Poor: Water.
Dielectric environment: Reactions benefitting from moderate polarity and Lewis basicity (e.g., demethylation quench) often use DCM or 1,2-dichloroethane. Higher-boiling aromatics (toluene/xylene) enable electrophilic substitutions at elevated temperature.
When to choose which solvent (practical tips):
Spectroscopic prep and thin-film casting: CHCl3/DCM or toluene for clean evaporation and good solvency.
Demethylation (BBr3-mediated): Dry DCM at −78 to 0 °C is common (literature). Avoid protic solvents during reagent addition.
Electrophilic substitution or SNAr on pre-halogenated derivatives: Nitrobenzene or sulfolane (for high-T), or o-dichlorobenzene for >150 °C regimes.
Crystallization: Toluene or ethanol/hexanes mixtures often give well-formed crystals; screen binary solvent systems for polymorph control.
Note: These are general guidelines. Optimize based on your specific transformation and consult the Reaction Conditions section.
Storage and Reconstitution
Item-specific (from Product Data):
Storage Conditions: Room temperature.
Shipped In: Normal.
General guidance (for stable handling of aromatic ethers):
Keep container tightly closed in a dry, well-ventilated place. Protect from prolonged light exposure if conducting photophysical measurements to avoid baseline drift from trace impurities.
Hygroscopicity: Not strongly hygroscopic, but store desiccated to prevent clumping and to ensure accurate weighing.
Reconstitution: Not applicable; this is a solid reagent. For solution preparation, dissolve in an appropriate dry organic solvent (e.g., DCM, toluene, THF) immediately before use for moisture-sensitive transformations (e.g., BBr3 demethylation).
Freeze–thaw: Not relevant. If preparing stock solutions, store in amber vials under inert gas at room temperature or refrigerated depending on solvent stability; use within days to weeks as dictated by solvent.
Always refer to the CoA/SDS for any lot-specific storage notes or stability data.
Structure and Identity
Concise description: 2,7-Dimethoxynaphthalene is a symmetrical dimethoxy-substituted polycyclic aromatic ether derived from naphthalene.
Item-specific (from Product Data):
SKU: D135470
CAS: 3469-26-9
PubChem CID: 77021
InChIKey: 283583 (as provided)
Storage: Room temperature; shipped under normal conditions
Literature/Computed identifiers (general reference values, not item-specific):
Core: Naphthalene (fused bicyclic aromatic system; two benzene rings fused in an ortho arrangement).
Substitution pattern: Methoxy groups at the 2- and 7-positions (para across the long axis of naphthalene, providing C2 symmetry).
Functional groups: Two anisole-type aryl methyl ethers (Ar–O–CH3).
2D description: One planar polyaromatic scaffold (naphthalene) bearing two methoxy substituents at opposing ring carbons on each ring, producing a symmetrical, electron-rich aromatic ether.
Stereochemistry: None (achiral, no stereocenters).
Synthetic Utility
Key reactivity motifs (general literature):
Aryl methyl ethers (Ar–O–Me):
Readily demethylated to phenols (BBr3, HI/AcOH, AlCl3/thiols), enabling rapid access to 2,7-dihydroxynaphthalene.
Serve as strong π-donors, accelerating EAS and steering regioselectivity (ortho/para activation relative to OMe). On naphthalene, substitution patterns are governed by ring activation and resonance stabilization.
Naphthalene scaffold:
Amenable to halogenation at activated sites; subsequent Pd-catalyzed couplings (Suzuki–Miyaura, Buchwald–Hartwig, Kumada) diversify the 2,7-axis for conjugated systems.
Oxidation/reduction sequences can convert the ring to partially saturated or quinonoid derivatives.
Retrosynthetic value:
2,7-Dimethoxynaphthalene is a convergent precursor to symmetric 2,7-disubstituted naphthalenes via O-demethylation then re-alkylation/acylation/etherification or via cross-coupling after directed halogenation.
Practical considerations:
Stability: Air- and moisture-stable; tolerates standard handling.
Purification: Recrystallization is often efficient due to planarity and strong π–π interactions; if using silica, add 0.1–1% triethylamine to mitigate acid-catalyzed demethylation.
Analysis: 1H NMR shows two methoxy singlets (often equivalent by symmetry) and characteristic naphthalene aromatic multiplets; 13C NMR displays anisole-type ipso carbons downfield (~155–160 ppm, literature).
Target Specificity
Not applicable. This product is a small-molecule aromatic ether, not a biological targeting reagent (e.g., antibody, ligand with defined biomolecular target profile). No antigen/epitope, clone, or species reactivity information is relevant.
Häufig gestellte Fragen
What is the purity of this product, and how is it determined?
This product is supplied at ≥98% purity, determined by HPLC. Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 3469-26-9, the molecular formula is C12H12O2, and the molecular weight is 188.23 g/mol. InChIKey PPKHAIRFQKFMLE-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Wir verwenden Cookies, um die ordnungsgemäße Funktion der Website sicherzustellen und, soweit zulässig, Ihr Nutzererlebnis zu verbessern. Sie können Ihre Einstellungen jederzeit unter „Einstellungen“ verwalten. Weitere Informationen finden Sie in unserer Cookie-Richtlinie.
Dürfen wir Sie über Rabattaktionen informieren?
Später erinnern
Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.