This compound belongs to the class of organic compounds known as ketones. These are organic compounds in which a carbonyl group is bonded to two carbon atoms R2C=O (neither R may be a hydrogen atom). Ketones that have one or more alpha-hydrogen atoms undergo keto-enol tautomerization, the tautomer being an enol.
External Descriptors
Oxygenated hydrocarbons
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Bewertungen
Kundenbewertungen
Application Protocols
Not applicable. No immunoassay or bioanalytical application protocols (e.g., WB, IHC, IF, FC) are associated with this solvent/reagent. For synthetic or process protocols, refer to the Reaction Conditions and Synthetic Utility sections.
Biological Roles
This product is a simple aliphatic ketone used primarily as a chemical solvent/reagent. It does not serve a canonical biological role (e.g., metabolite, cofactor, buffer) in laboratory biochemistry. Any toxicological or metabolic information for 2-hexanone (e.g., biotransformation to 2-hexanol or conjugates) is literature background and not a purpose of this product listing. For research use only; not for food, drug, or clinical applications.
Buffer Applications
2-Hexanone is not a buffering agent and is not used to prepare aqueous buffer systems. If present in biochemical workflows, it would typically be as an extraction or reaction solvent in a separate organic phase. For pH control, select conventional buffers (e.g., phosphate, Tris, HEPES) appropriate to your system.
Green Alternatives
Greener solvent selection considers safety, environmental impact, and lifecycle. 2-Hexanone offers moderate polarity and a mid-range boiling point but is a flammable VOC with limited water miscibility.
Greener candidates for similar roles (literature-based comparison)
| Option | Boiling point | Polarity | Pros | Cons |
|---|---|---|---|---|
| 2-MeTHF | ~80 °C | medium | Bio-based, lower toxicity profile, good for organometallics | Lower bp; ether peroxide risk; water co-solubility can matter |
| CPME | ~106 °C | low–medium | Broad solubility, low peroxide formation vs THF | Lower polarity than ketones; cost |
| Ethyl acetate | ~77 °C | medium | Readily biodegradable, low toxicity | Lower bp; hydrolyzes under strong base |
| Propylene carbonate | ~242 °C | high | Non-flammable, high polarity | Very high bp/viscosity; limited in some reactions |
| Cyclopentanone | ~131 °C | medium | Ketone functionality retained; higher bp than MEK | More odorous; availability/cost |
Selection notes
For enolate or reductive amination chemistry, cyclopentanone or greener esters (EtOAc) may substitute depending on reactivity.
For extractions or as a refluxing medium <110 °C, CPME or 2-MeTHF can offer greener profiles with careful peroxide control.
2-Hexanone is not an approved excipient and is generally avoided in pharmaceutical formulations due to volatility and flammability. In process development, aliphatic ketones can sometimes be used as process solvents or crystallization media; however, solvent selection must comply with regulatory guidelines for residual solvents (e.g., ICH Q3C). This product is supplied strictly for research and laboratory use; not for formulation, API manufacturing, or clinical use.
Physical Properties
Item-specific (from Product Data)
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Literature/general reference values (not item-specific; typical for 2-hexanone)
Physical state: colorless, volatile liquid with ketonic odor (literature)
Molecular weight: 100.16 g/mol (literature)
Boiling point: ~127–129 °C at 1 atm (literature)
Melting point: ~−60 °C (literature)
Density: ~0.81–0.82 g/mL at 20–25 °C (literature)
Refractive index: n20 D ~1.409 (literature)
Vapor pressure: on the order of a few mmHg at 25 °C (literature)
Flash point (closed cup): ~55–60 °C (literature)
Solubility: slightly soluble in water; miscible with many organic solvents (alcohols, ethers, hydrocarbons) (literature)
LogP (octanol/water): ~1.3–1.6 (literature)
pKa: not appreciably acidic/basic; conjugate acid pKa << 0 (literature)
Notes
All numerical values above are typical literature data for 2-hexanone; they are not product specifications. For exact specifications and acceptance limits, consult the CoA/Specification sheet for SKU H105744.
Quality and Grades
Item-specific (from Product Data)
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Interpreting common grades (general guidance)
Analytical/Reagent grade: tight limits on nonvolatile residue, acidity/alkalinity, and GC purity; suitable for quantitative analysis.
HPLC/UV grade solvents: tightly controlled UV absorbance and trace impurities for chromatographic applications.
Anhydrous or “sure-seal” variants: controlled water content, often packaged under inert atmosphere for moisture-sensitive reactions.
Stabilizers and inhibitors
2-Hexanone typically does not require peroxidation inhibitors (unlike ethers), but quality specs may include peroxide and aldehyde limits, acidity, or water content. For this catalog item, specific stabilizers/limits are Not specified for this item; refer to CoA/Spec Sheet.
Practical notes for method development
For photochemical or trace-analysis work, confirm UV cutoff/absorbance specs on the CoA.
For base- or acid-catalyzed transformations (e.g., enolate chemistry), verify residual acidity/basicity and water content.
If using as an internal standard or solvent in GC, check GC purity profile and residue on evaporation specs.
Contact Aladdin Scientific with your required acceptance criteria; we can help match a grade aligned to your application.
Reaction and Applications
As a linear aliphatic methyl ketone, 2-hexanone serves both as a reagent substrate and as a medium-polar aprotic solvent.
As a reagent/substrate (literature examples)
Enolate chemistry: α-deprotonation with strong base (e.g., LDA, NaH) enables C–C bond formation via alkylation or aldol reactions.
Baeyer–Villiger oxidation: conversion to the corresponding ester (cleavage migrates the more substituted group; here butyl migration favored).
Reduction: NaBH4 or catalytic hydrogenation yields secondary alcohol (2-hexanol); selectivity tunable via catalyst/conditions.
Imination/reductive amination: formation of imines/oximes with amines/hydroxylamine followed by reduction to amines.
α-Halogenation and subsequent substitution/elimination sequences.
As a solvent (literature guidance)
Supports nucleophilic substitutions, condensations, and metal-catalyzed couplings where moderate polarity and a 120–130 °C reflux are beneficial.
Often blended with less polar hydrocarbons to tune solubility or with polar co-solvents (e.g., alcohols) to assist salt dissolution.
Practical considerations
Avoid strong base at ambient for prolonged times to limit self-condensation/aldol impurities; run enolate steps cold and quench promptly.
Control water content for moisture-sensitive steps; 3Å sieves efficiently suppress hydrate/enol formation.
Monitor for competitive N- vs O-alkylation in enolate alkylations; use counterion/solvent/crown effects to bias selectivity.
Representative literature applications
Use in reductive amination of aliphatic amines at elevated temperature.
Substrate in BV oxidation to n-butyl acetate derivatives.
Medium for SNAr or Pd-catalyzed cross-couplings when higher reflux is required than acetone/MEK allow.
Reaction Conditions
General literature guidance for 2-hexanone as reagent/solvent (not item-specific; optimize per system):
Enolate alkylation
Base: LDA (1.0–1.2 equiv) in THF or 2-hexanone/THF mix at −78 to −20 °C
Electrophiles: primary alkyl halides, Michael acceptors
Quench: cold NH4Cl or AcOH; typical isolated yields 60–85% depending on electrophile/stereocontrol (literature ranges)
Reductive amination
Condense with amine (0.9–1.1 equiv) + trace acid; reduce with NaBH3CN or catalytic H2 (Pd/C) in alcohol/ketone mixture
Oxidant: mCPBA (1.2–1.5 equiv) or peracetic acid in DCM/CHCl3 at 0–25 °C
Product: primarily n-butyl acetate via butyl migration (literature selectivity)
As solvent
Reflux window: ~125–129 °C; suited to SNAr, condensations, and some Pd-catalyzed couplings
Drying: 3Å/4Å sieves overnight or distill from CaCl2; maintain anhydrous if water-sensitive.
Values above are representative literature conditions intended for planning; adjust for scale, substrate electronics, and safety constraints.
Safety and Handling
Item-specific (from Product Data)
GHS Classification: Not specified for this item; refer to SDS.
Signal Word: Not specified for this item; refer to SDS.
H-Statements: Not specified for this item; refer to SDS.
Pictograms: Not specified for this item; refer to SDS.
Storage: Protected from light, Room temperature (per Product Data)
Typical hazards (literature/SDS from analogous products; not item-specific)
Flammable liquid (often GHS Flam. Liq. 3); may cause eye/skin irritation and drowsiness or dizziness (STOT SE 3); harmful if inhaled at high vapor concentrations.
Vapor–air mixtures may form explosive atmospheres near the flash point; use only with adequate ventilation away from ignition sources.
Handling & PPE (good laboratory practice)
Use in a fume hood. Avoid inhalation and skin/eye contact.
Wear safety glasses or splash goggles, lab coat, and appropriate chemically resistant gloves (e.g., nitrile). Consider flame-resistant lab coat when working near ignition sources.
Incompatibilities (general)
Strong oxidizers (risk of exotherm), strong bases/acids for prolonged contact (may catalyze aldol/self-condensation), reactive metals.
First aid (general guidance; defer to SDS)
Inhalation: move to fresh air; seek medical attention if symptoms persist.
Skin/eyes: rinse with water for at least 15 minutes; remove contaminated clothing.
Ingestion: rinse mouth; do not induce vomiting; seek medical attention.
Always consult the item-specific SDS for authoritative hazard and response information.
Solvent Selection
2-Hexanone is a medium-polar, aprotic ketone solvent offering a useful balance of solvency and boiling point.
Polarity/miscibility (literature)
Polarity class: medium-polar aprotic; Hildebrand δT in the 17–19 MPa^1/2 range (typical for aliphatic ketones).
Miscibility: miscible with many organics (alcohols, ethers, chlorinated solvents, hydrocarbons); only slightly soluble in water.
Dielectric constant: moderate (lower than acetone/MEK; higher than pure hydrocarbons).
When to choose 2-hexanone
Need a higher boiling ketone than acetone/MEK (bp ~127–129 °C) to support elevated-temperature reactions or extractions without rapid loss.
Desire an aprotic medium that stabilizes polar transition states yet is less coordinating than amides.
As an alternative to toluene/heptane when a bit more polarity is needed to dissolve polar substrates or salts (with a co-solvent).
Comparisons (literature, qualitative)
vs. MEK (bp 80 °C): 2-hexanone evaporates slower; better for reflux >100 °C; slightly poorer water miscibility.
vs. Cyclohexanone (bp 155 °C): lower viscosity and easier removal; less hydrogen-bond accepting strength.
vs. Ethyl acetate: less prone to hydrolysis under basic conditions; higher bp; weaker H-bond donation/acceptance profile than esters.
Practical tips
Drying: molecular sieves (3Å/4Å) or distillation from CaCl2 (literature practice).
Degassing: standard sparging or freeze–pump–thaw if oxygen/moisture sensitive components are present.
Storage and Reconstitution
Item-specific (from Product Data)
Storage conditions: Protected from light, Room temperature.
Shipping: FedEx DG Service.
General guidance (literature/good practice)
Keep container tightly closed under ambient, dry conditions. Store away from ignition sources and oxidizers.
If frequent air exposure is expected, consider using septum-capped bottles to minimize vapor loss and moisture ingress.
For stringent water control, store over activated 3Å/4Å molecular sieves; verify water content as needed before moisture-sensitive use.
No reconstitution is required; this is supplied as a neat liquid. If dilution is needed, use compatible anhydrous solvents (e.g., hydrocarbons, ethers, alcohols) as dictated by your process.
Do not freeze; viscosity increases at low temperature may impede handling but no benefit is gained.
Always refer to the item-specific SDS and CoA/Spec Sheet for packaging details, shelf-life, and any stabilizer notes specific to SKU H105744.
Structure and Identity
Brief overview: 2-Hexanone (also known as methyl butyl ketone, MBK) is a linear aliphatic methyl ketone featuring an sp2-hybridized carbonyl carbon at C-2 on a six-carbon chain.
Item-specific (from Product Data)
SKU: H105744
CAS: 591-78-6
CID: 11583
InChIKey: 304230 (note: format appears non-standard; consult CoA/SDS for confirmation)
Storage: Protected from light, Room temperature
Shipped in: FedEx DG Service
Research Use: For research use only
Literature/Computed (general reference; not item-specific)
Functional groups: one saturated aliphatic ketone (R–CO–R′)
Hybridization: carbonyl C sp2; adjacent carbons sp3
Conformation: flexible n-alkyl chain; no stereocenters; no rings or heteroatoms beyond carbonyl O
Enol/enolate: capable of keto–enol tautomerism; forms enolates at the α-positions under basic conditions
2D description: a six-carbon chain with the carbonyl between C1 (methyl) and C3 (the remaining butyl segment), i.e., CH3–CO–(CH2)3–CH3
Synthetic Utility
From a retrosynthetic and functional group standpoint, 2-hexanone is a versatile node in aliphatic frameworks.
Functional group behavior (literature)
Carbonyl reactivity: nucleophilic additions (hydrides, organometallics) to yield secondary alcohols; imine/oxime formation with amines/oximes.
α-Carbon chemistry: enolate/enoate pathways enable C–C bond constructions (alkylation, aldol, Michael additions after transformation).
Oxidation/oxidative rearrangement: Baeyer–Villiger to esters; α-oxidation to α-hydroxyketones (via peracids or dioxiranes).
Halogenation: α-halogenation paves routes to elimination/substitution manifolds.
Strategic applications
Homologation and chain editing through enolate formation followed by electrophile introduction (e.g., CH3CO(CH2)3CH3 → diversify at C-α).
Building block for secondary alcohols of defined stereochemistry via chiral reductions or CBS catalysts.
Precursor to amines via oxime formation and reduction (Beckmann or via reductive amination).
Solvent-based utility
As a mid-bp solvent, enables reactions at 100–125 °C without pressure equipment; useful where acetone/MEK boil too low and DMF/DMAc are too polar.
Note: Choose base, counterion, and temperature to control enolate geometry and chemoselectivity; monitor for self-condensation under basic, warm conditions.
Target Specificity
Not applicable. This product is a small-molecule solvent/reagent and is not an antibody, probe, or biologic with defined binding targets. No antigen/epitope or species reactivity applies.
Häufig gestellte Fragen
What is the purity of this product?
This product is supplied at ≥98% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature, protected from light. The material is light-sensitive — keep it in its original opaque or amber container.
How is this product shipped?
This product is classified as dangerous goods and ships via FedEx DG Service. Ground and other economy services are not available, and delivery to some destinations or address types may be restricted.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 591-78-6, the molecular formula is C6H12O, and the molecular weight is 100.16 g/mol. InChIKey QQZOPKMRPOGIEB-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Wir verwenden Cookies, um die ordnungsgemäße Funktion der Website sicherzustellen und, soweit zulässig, Ihr Nutzererlebnis zu verbessern. Sie können Ihre Einstellungen jederzeit unter „Einstellungen“ verwalten. Weitere Informationen finden Sie in unserer Cookie-Richtlinie.
Dürfen wir Sie über Rabattaktionen informieren?
Später erinnern
Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.