4-(4-Ethylphenoxy)benzaldehyde - ≥98% , CAS No.61343-85-9

CAS: 61343-85-9 Cat. No.: E1293165 Summenformel: C15H14O2 Molekulargewicht: 226.27
Zu bestellen verfügbar
QUALITÄT & REINHEIT ≥98%
Storage
Room temperature
Shipped In
Normal
★
Größe
Deutschland (EU)
USA*
Preis
Menge
5g
E1293165-5g
Auf Bestellung · 8–12 Wochen
1.240,78€
Enter a quantity for the sizes you want to add.

Spezifikationen

Spezifikationen & Reinheit
≥98%
Storage
Room temperature
Verschickt in
Normal
Reinheit
≥98%
Namen und Kennungen
SMILES
CCC1=CC=C(C=C1)OC2=CC=C(C=C2)C=O
IUPAC Name
4-(4-ethylphenoxy)benzaldehyde
InChIKey
SAXOBSDCTFFTIR-UHFFFAOYSA-N
InChI
1S/C15H14O2/c1-2-12-3-7-14(8-4-12)17-15-9-5-13(11-16)6-10-15/h3-11H,2H2,1H3
Molekulargewicht
226.27

Erweiterte Daten

Taxonomic Classification

Taxonomy Tree

KingdomOrganic compounds
SuperclassBenzenoids
KlasseBenzene and substituted derivatives
SubclassDiphenylethers
Intermediate Tree Nodes Not available
Direct ParentDiphenylethers
Alternative Parents Diarylethers  Phenoxy compounds  Phenol ethers  Benzoyl derivatives  Benzaldehydes  Organic oxides  Hydrocarbon derivatives  
Molecular FrameworkAromatic homomonocyclic compounds
Substituents Diphenylether - Diaryl ether - Phenoxy compound - Phenol ether - Benzoyl - Benzaldehyde - Aryl-aldehyde - Ether - Organic oxygen compound - Organic oxide - Hydrocarbon derivative - Organooxygen compound - Aldehyde - Aromatic homomonocyclic compound
BeschreibungThis compound belongs to the class of organic compounds known as diphenylethers. These are aromatic compounds containing two benzene rings linked to each other through an ether group.
External Descriptors Not available
3D-Struktur
Interaktives chemisches Strukturmodell





Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Chemische und physikalische Eigenschaften
Molekulargewicht226.27
XLogP33.700
Hydrogen Bond Donor Count0
Hydrogen Bond Acceptor Count2
Rotatable Bond Count4
Exact Mass226.099 Da
Monoisotopic Mass226.099 Da
Topological Polar Surface Area26.300 Ų
Heavy Atom Count17
Formal Charge0
Complexity223.000
Isotope Atom Count0
Defined Atom Stereocenter Count0
Undefined Atom Stereocenter Count0
Defined Bond Stereocenter Count0
Undefined Bond Stereocenter Count0
The total count of all stereochemical bonds0
Covalently-Bonded Unit Count1
Lösungsrechner
Bewertungen

Kundenbewertungen

Application Protocols

Not applicable. No tested bioanalytical applications (e.g., WB, IHC, IF, FC) or procedural protocols are provided for this small-molecule reagent. For synthetic uses, follow standard organic chemistry protocols appropriate to aldehydes and aryl ethers; consult literature examples cited in the Reaction Conditions and Synthetic Utility sections.

Biological Roles

This product is a synthetic aromatic aldehyde intended for research and synthesis; no intrinsic biological role is assigned.

  • General considerations (literature/general)

    • Aldehydes can form Schiff bases with amines in biomolecules; this underlies common bioconjugation and derivatization chemistries but also potential nonspecific reactivity.
    • The aryl ether and para-ethyl substituent contribute to hydrophobicity; such motifs are widespread in small-molecule probes and materials, but specific biochemical activity depends on broader scaffold context.
  • Applicability

    • Not designed as a biochemical reagent or standard buffer component. Any use in biological assays should be preceded by compatibility and cytotoxicity assessments appropriate to the system.
  • Compliance

    • For research use only; not for diagnostic or therapeutic use.
Buffer Applications

This compound is not a buffering agent and is not typically used to prepare biological buffers or electrophoresis systems. If used in biochemical experiments (e.g., as a synthetic intermediate or probe precursor), dissolve in a compatible organic co-solvent and add to buffered systems at low percentages, validating solubility and compatibility in advance.

Green Alternatives
  • Greener solvent choices (literature/general)

    • Replace chlorinated solvents (e.g., CH2Cl2) with ethyl acetate, 2-MeTHF, cyclopentyl methyl ether (CPME), or toluene where performance allows.
    • For imine/oxime formations, ethanol or isopropanol can often substitute for aprotic solvents.
  • Comparison highlights (general)

    | Task | Conventional | Greener alternative | Trade-offs | |---|---|---|---| | Wittig/HWE | THF/DCM | 2-MeTHF/CPME | Similar reactivity; phase behavior differs; ensure base compatibility | | Reductive amination | MeOH/THF | EtOH/i-PrOH | Comparable kinetics; catalyst solubility may change | | Oxidation (Dess–Martin) | DCM | EtOAc/MeCN | Reagent stability varies; monitor carefully | | Purification | Hexanes/DCM | Heptane/EtOAc | Slightly lower elution strength; adjust gradient |

  • Process intensification

    • Use water-tolerant catalysts and solvent recycling when feasible.
    • Adopt continuous-flow for exothermic additions to the aldehyde, reducing solvent volumes.
  • Note

    • No item-specific green metrics are provided; evaluate EHS, cost, and performance trade-offs in your process.
Pharmaceutical Uses
  • Role: Not an excipient. As an aryl aldehyde, it may serve as a synthetic intermediate in API or agrochemical routes where para-formyl aryl–aryl ether motifs are required.

  • Formulation context (general)

    • If carried through to medicinal chemistry SAR, stock solutions are commonly prepared in DMSO, MeCN, or EtOH and diluted into assay media at low organic percentages.
    • No pharmacopeial monograph is indicated for this specific compound.
  • Regulatory note

    • For research use only; not for human or veterinary therapeutic use. Any GMP relevance would require separate qualification and specifications not provided here.
Physical Properties
  • Item-specific (Product Data)

    • Appearance: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
    • Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
  • Literature/computed values (for reference; not item specifications)

    • Empirical formula (computed from structure): C15H14O2
    • Formula weight (computed): ~226.27 g/mol
    • General solubility profile (literature): expected to be sparingly soluble in water and readily soluble in common organic solvents (e.g., dichloromethane, ethyl acetate, THF, toluene, acetonitrile, alcohols), consistent with a moderately lipophilic aryl aldehyde ether.
    • Functional group spectroscopic cues (general): aldehyde C=O stretch typically ~1690–1720 cm−1 (IR); characteristic aldehydic proton ~9.7–10.1 ppm (1H NMR); two distinct para-disubstituted aromatic patterns.
    • Lipophilicity: aromatic ether plus ethyl substituent suggests moderate logP (qualitative; exact value not confirmed here).
  • Not provided in Product Data (consult CoA/Spec Sheet)

    • Melting point, boiling point, density, refractive index, pKa/logP, UV–Vis cutoff/extinction.
Quality and Grades
  • Item-specific (Product Data)

    • Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
  • Interpretation and guidance

    • Without an explicit grade, users should consult the CoA for assay, chromatographic purity profile, and any residual solvent or metal screening.
    • UV quality: If using in photochemical or analytical applications, check UV–Vis baseline and impurities on the CoA; aromatic aldehydes often exhibit strong UV absorbance.
    • Stabilizers: No stabilizers are indicated in the Product Data. If stabilization (e.g., acid scavengers) is required for your workflow, validate compatibility experimentally.
    • Aldehyde integrity: For reactions sensitive to trace oxidation, verify by NMR/LC–MS that the aldehyde has not partially oxidized to the corresponding acid; a quick pre-run through a short silica plug can refresh material prior to critical steps.
  • Documentation

    • For lot-specific specifications (purity method, water, residual solvents, metals), refer to the CoA/Spec Sheet; these are not specified here.
Reaction and Applications
  • Typical research uses (literature/general)

    • Carbonyl transformations: Wittig/Horner–Wadsworth–Emmons olefination to build styrenes or diaryl ethenes; Knoevenagel condensations with active methylene compounds; oxime/hydrazone formation; reductive amination to benzylic amines.
    • Nucleophilic additions: Organometallic (Grignard, organolithium, organozinc) additions to furnish secondary alcohols after workup; control over ortho/para directing effects from the phenoxy group in subsequent functionalizations.
    • Protection/derivatization: Acetalization (ethylene glycol, acid catalysis) to mask the aldehyde during cross-couplings or directed metalations on the rings.
    • Materials intermediates: The push–pull aryl ether with para-ethyl substituent is a convenient motif in liquid-crystal, polymer, and OLED precursor synthesis where electron distribution can be tuned by the –O–aryl/–CHO pattern.
  • Practical considerations

    • Moisture/oxygen: Keep anhydrous to avoid competing imine hydrolysis and base-promoted side reactions; minimize exposure to air to limit oxidation to the acid.
    • Base sensitivity: Strong base can induce side reactions at the aldehyde; favor non-nucleophilic bases (DIPEA, DBU) when needed.
    • Purification: Aldehydes can streak on silica; adding a few percent Et3N to the eluent or pre-treating silica can sharpen bands.
  • Manufacturer Applications

    • None provided in Product Data; the above reflects common literature practices for aryl aldehydes/aryl ethers.
Reaction Conditions

General literature guidance (not item specifications); optimize for your system.

  • Wittig olefination

    • Solvent: THF, toluene, or DCM; Temperature: −78 to rt depending on ylide reactivity; Base: n-BuLi/NaHMDS for ylide generation; Typical times: 1–6 h; Workup: aqueous NH4Cl then silica.
  • Horner–Wadsworth–Emmons (HWE)

    • Solvent: THF/DMF; Base: NaH, K2CO3, or t-BuOK; Temperature: 0 °C to rt; E-selectivity favored with stabilized phosphonates; 2–12 h.
  • Reductive amination (two-step)

    • Imine formation: carbonyl + amine in EtOH/MeCN with AcOH catalyst, 0.5–2 h; Reduction: NaBH3CN or H2/Pd-C in alcohol at rt to 50 °C.
  • Nucleophilic addition (Grignard/organolithium)

    • Solvent: anhydrous THF/Et2O/2-MeTHF; Temperature: −78 to 0 °C for controlled addition; Quench: saturated NH4Cl; Typical yields good with strict anhydrous technique.
  • Oxime/hydrazone formation

    • Solvent: EtOH or toluene; Catalyst: AcOH or p-TsOH; Water removal: Dean–Stark for toluene; 1–4 h to completion.
  • Oxidation to acid

    • Reagents: Oxone/NaClO2 or KMnO4 under controlled conditions; Solvent: MeCN/H2O or acetone/H2O; Temperature: 0–25 °C.
  • Notes

    • Protect aldehyde as acetal when performing strong base metalations or cross-couplings on the aryl rings.
    • Monitor reactions by TLC/UPLC; aldehyde often displays strong UV at 254 nm.
Safety and Handling
  • Item-specific (Product Data)

    • GHS Classification, Signal Word, Pictograms, and H-Statements: Not specified for this item; refer to SDS.
    • Storage: Room temperature; shipped in normal conditions.
  • General safety guidance for aryl aldehydes and aryl ethers (literature; not item-specific)

    • Hazards: Many aromatic aldehydes are irritants to skin, eyes, and respiratory tract; may cause sensitization in some individuals. Avoid inhalation of dust/vapors and contact with skin/eyes.
    • PPE: Use chemical-resistant gloves, lab coat, and safety goggles; handle in a fume hood.
    • Incompatibilities: Strong bases (can induce Cannizzaro in non-enolizable aldehydes; for this enolizable aryl aldehyde, base-catalyzed side reactions/aldol may occur); strong oxidizers (oxidation to the corresponding benzoic acid derivative); strong reducing agents (can reduce to benzyl alcohol). Avoid prolonged exposure to air/oxygen if oxidation is a concern.
    • Handling tips: Keep containers tightly closed, minimize headspace, and protect from light to limit oxidative degradation of the aldehyde.
    • First aid (overview; defer to SDS): Inhalation—fresh air; Skin—wash with soap and water; Eyes—rinse with water for several minutes; Ingestion—rinse mouth, seek medical advice.
  • Waste: Dispose according to institutional and local regulations for organic aldehydes/ethers.

Solvent Selection
  • Polarity and miscibility (literature/general)

    • 4-(4-Ethylphenoxy)benzaldehyde is a moderately lipophilic aromatic aldehyde–ether. It is typically soluble in medium-polar to nonpolar organic solvents (DCM, EtOAc, THF, toluene, MeCN, alcohols) and poorly soluble in water.
    • For chromatographic purification, hexanes/EtOAc or toluene/EtOAc gradients provide good selectivity for aryl aldehydes.
  • Choosing solvents by task

    • Nucleophilic additions (e.g., Grignard, organozinc): Use anhydrous ethers (THF, 2-MeTHF) or toluene; strictly exclude moisture.
    • Olefination (Wittig/HWE): THF, toluene, or CH2Cl2 depending on ylide/phosphonate basicity.
    • Oxime/hydrazone formation and reductive amination: Alcohols or MeCN with catalytic acid; azeotropic removal of water (toluene) can drive equilibria.
    • Oxidation/reduction: DCM/MeCN for mild oxidations; alcohols/THF for catalytic hydrogenations of imine intermediates.
  • Small comparison (general)

    • DCM vs EtOAc: DCM offers faster kinetics and better solubility for many aryl aldehydes but is less green; EtOAc is greener and often adequate for imine/oxime formation.
    • THF vs 2-MeTHF: 2-MeTHF provides comparable performance with improved safety/greenness and easier phase separations.
  • Note: No item-specific solubility specs are available; confirm solvent choice on small scale.

Storage and Reconstitution
  • Item-specific (Product Data)

    • Storage Conditions: Room temperature
    • Shipped In: Normal conditions
  • General guidance for aldehyde-containing aromatics (literature/general)

    • Protect from light and moisture; store in a tightly closed container. If long-term storage is planned, consider inert-atmosphere (nitrogen/argon) and a desiccator to minimize oxidation to the corresponding acid.
    • Avoid prolonged exposure to bases and oxidants in storage areas.
    • If solid, break up any caking gently before weighing; if liquid/oily, warm slightly to homogenize before aliquoting.
    • For solution preparation, use dry, oxygen-free solvents when sensitive transformations are intended. Prepare stock solutions fresh or store aliquots at 2–8 °C, protected from air, if necessary.
  • Stability

    • No item-specific stability data are provided. Check integrity periodically by 1H NMR/LC–MS if stored for extended periods.
  • Note

    • For research use only; consult the SDS and CoA/Spec Sheet for lot-specific guidance.
Structure and Identity

4-(4-Ethylphenoxy)benzaldehyde is a para-formylated diphenyl ether bearing a para-ethyl substituent on the non-formyl ring.

  • Item-specific (Product Data)

    • CAS: 61343-85-9
    • InChIKey: 331234 (as provided)
    • Storage: Room temperature; shipped under normal conditions
    • Research Use: For research use only
  • Literature/computed identifiers and features (for reference; not item specifications)

    • Molecular formula (computed from structure): C15H14O2
    • Molecular weight (computed): ~226.27 g/mol
    • SMILES (literature): CCc1ccc(Oc2ccc(cc2)C=O)cc1
    • Structural features: two phenyl rings linked by an ether oxygen (aryl–O–aryl); one ring carries a para-aldehyde (–CHO); the other bears a para-ethyl group; no stereocenters.
    • 2D description: A planar aryl ether core with the aldehyde carbonyl para to the ether on one ring; the other ring is para-ethyl substituted. Electron-withdrawing –CHO and electron-donating –O–aryl/ethyl create an anisotropic, push–pull aryl system.
  • Notes

    • If precise elemental analysis or spectral identifiers are required for your lot, refer to the CoA/Spec Sheet.
Synthetic Utility
  • Functional group leverage

    • Aldehyde: gateway to alcohols (NaBH4/Luche, organometallics), alkenes (Wittig/HWE), imines/enamines (amination), carboxylic acids (oxidation), cyanohydrins, and acetals (protection).
    • Aryl ether: modulates electronics, directing para/ortho substitution on the phenyl ring; robust under many conditions, yet can be cleaved under harsh nucleophilic or reductive conditions if required.
    • Para-ethyl group: increases lipophilicity and can influence packing in materials targets; tolerant of many transformations.
  • Strategic uses (literature/general)

    • Divergent synthesis: From a single aldehyde, access libraries of diaryl alkenes via Wittig/HWE with varied phosphoranes/phosphonates.
    • Late-stage functionalization: Electrophilic bromination/iodination on the rings (controlled by –O– directing effects) provides handles for cross-coupling.
    • Orthogonal protection: Temporary acetalization enables metalation/coupling on the rings without carbonyl interference.
  • Purification/analysis tips

    • Monitor aldehyde integrity by 1H NMR (formyl ~9.8–10.0 ppm) and IR (C=O ~1700 cm−1). Oxidized acid impurity is readily spotted by disappearance of the aldehydic proton and emergence of broad acid signals.
Target Specificity

Not applicable. This product is a small-molecule chemical, not a biological targeting reagent (e.g., antibody, enzyme inhibitor standard with defined target). No target specificity information is provided in the Product Data.

Häufig gestellte Fragen

How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
How should this product be stored?
Store at room temperature.
What is the purity of this product?
This product is supplied at ≥98% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 61343-85-9, the molecular formula is C15H14O2, and the molecular weight is 226.27 g/mol. InChIKey SAXOBSDCTFFTIR-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Dürfen wir Sie über Rabattaktionen informieren?

Später erinnern

Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.

Hoppla! Benachrichtigungen sind deaktiviert.