Coumachlor is an anticoagulant rodenticide. It forms complex with zirconium. Coumachlor was used as internal standard for simultaneous enantioseparation of (+/-)-warfarin by chiral capillary electrochromatography with electrospray ionization mass spectrometry.
Spezifikationen
Synonyme
3-((alpha-Acetonyl)-4-chlorbenzyl)-4-hydroxycumarin | 3-(1-(4-Cloro-fenil)-3-oxo-butil)-4-idrossicumarina | 3-(1-(P-CHLOROPHENYL)-2-ACETYLETHYL)-4-HYDROXYCOUMARIN | 3-(1-(4-Chlor-phenyl)-3-oxo-butyl)-4-hydroxy-cumarin [German] | 3-(1-(4-Chloorfenyl)-3-oxo-butyl)-4-hydroxy-cumarine [Dutch] | 3-(1-Acetyl-2-(p-chlorophenyl)ethyl)-4-hydroxyco Show more
This compound belongs to the class of organic compounds known as 4-hydroxycoumarins. These are coumarins that contain one or more hydroxyl groups attached to C4-position the coumarin skeleton.
External Descriptors
Coumarin rodenticides
1. Djoumbou Feunang Y, Eisner R, Knox C, Chepelev L, Hastings J, Owen G, Fahy E, Steinbeck C, Subramanian S, Bolton E, Greiner R, and Wishart DS. ClassyFire: Automated Chemical Classification With A Comprehensive, Computable Taxonomy. Journal of Cheminformatics, 2016, 8:61.
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Bewertungen
Kundenbewertungen
Application Protocols
No item-specific tested applications are provided. For common research uses:
Preparation of analytical standards
Dissolve accurately weighed solid in dry DMSO, ACN, or MeOH to prepare a primary stock (e.g., 1–10 mg/mL). Filter (0.2 µm PTFE) if needed.
Prepare serial dilutions in solvent or solvent/water (with appropriate modifier) for LC–MS calibration; verify stability over the assay timeframe.
Biochemical assays (mechanistic studies)
Prepare concentrated DMSO stocks and dilute into assay buffer to ≤1% organic co-solvent to avoid enzyme inhibition artifacts; confirm solubility and lack of precipitation.
These are general guidelines only. For validated protocols, consult the primary literature relevant to Coumachlor and your assay system.
Biological Roles
General/literature context for 4‑hydroxycoumarin derivatives (including Coumachlor; CAS 81‑82‑3):
Mechanistic class
Vitamin K cycle antagonist: inhibits the regeneration of reduced vitamin K required for post-translational gamma-carboxylation of specific proteins. The canonical molecular target in vertebrates is the vitamin K epoxide reductase complex (VKOR). Specific binding parameters for Coumachlor should be obtained from primary literature.
Research applications
Tool compound in studies of VKORC1/VKORC1L1 function, resistance mutations, and comparative potency across species.
Analytical marker in environmental fate/toxicology investigations of anticoagulant rodenticides (sorption, degradation, bioaccumulation assessments).
ADME considerations (non-clinical, literature)
Members of this class tend to be lipophilic, protein-bound, and may undergo hepatic metabolism (hydroxylation, conjugation). Exact pathways and kinetics for Coumachlor are matrix- and species-dependent and should be sourced from primary reports.
Note: This information is provided solely for biochemical context in research. No medical or clinical claims are made. For handling and exposure guidance, consult the SDS.
Buffer Applications
Coumachlor is a neutral/weakly acidic aromatic small molecule and is not a buffer component. It does not form a conventional buffering system. For aqueous work, prepare solutions in suitable organic co-solvents (e.g., DMSO, ACN, ethanol) and dilute into buffered media as required, ensuring solubility and avoiding precipitation.
Green Alternatives
While Coumachlor itself is an active research analyte and not a solvent or reagent typically replaced for process greening, you can still improve the sustainability profile of workflows involving this compound:
Solvent selection (greener options)
Prefer EtOAc, IPA, or MeTHF over chlorinated solvents when feasible for extractions and purification. DMSO and ethanol are favorable for stock solutions when compatible with the method.
Sample preparation
Use micro-scale extraction and miniaturized SPE to reduce solvent volumes.
Consider aqueous-organic systems (ACN/water) for LC sample prep to minimize halogenated solvent use.
Waste minimization
Implement closed-loop solvent recovery for ACN/EtOAc.
Where matrix allows, use direct-injection LC–MS with on-line cleanup to reduce solvents compared to offline LLE.
Tradeoffs
Some greener solvents (EtOAc, MeTHF) may offer lower solubility than DCM/CHCl3 for highly lipophilic analytes; method re-optimization may be needed.
DMSO is green-leaning but can interfere with certain detectors and assays at higher percentages; verify compatibility.
Adopt a solvent selection guide (e.g., GSK/ACS green solvent guides) to balance performance with environmental impact.
Pharmaceutical Uses
No pharmacopeial or excipient roles are provided for this item. In a research-only context, Coumachlor (CAS 81‑82‑3) may be used as:
An analytical reference standard for method development/validation related to coumarin anticoagulant residues.
A tool compound to probe vitamin K cycle enzyme interactions in biochemical assays.
This product is supplied strictly for research use only (per Product Data). No clinical or therapeutic use is implied or permitted. For any regulated-use applications (calibration standards, compliance testing), consult the CoA for purity, identity confirmation, and traceability.
Physical Properties
Item-specific numerical specifications are not provided in the Product Data for this SKU. Consult the CoA/Spec Sheet for definitive specifications.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Melting point (literature/general for 4‑hydroxycoumarin rodenticide analogs): typically crystalline solids with moderate MP ranges; exact MP for Coumachlor should be verified from primary sources for this CAS (81-82-3).
Boiling point: Not applicable (decomposes before distillation is meaningful for most coumarin solids); specific value not provided for this item.
Density: Not specified for this item; refer to CoA/Spec Sheet.
Solubility (general/literature trends):
Poorly soluble in water for most 4‑hydroxycoumarin derivatives.
Soluble in organic solvents such as acetone, ethanol, methanol, acetonitrile, DMSO, chlorinated solvents; exact solubility should be validated experimentally.
pKa (general for 4‑hydroxycoumarins): phenolic OH typically weakly acidic; exact pKa for Coumachlor should be sourced from primary literature/databases.
LogP/partitioning: members of this class are generally lipophilic; numerical logP for Coumachlor is not provided here.
Refractive index/UV cutoff: Not specified for this item; refer to CoA/Spec Sheet.
Always rely on the product’s CoA/SDS for property confirmation before method development.
Quality and Grades
Grade/Purity: Not specified for this item; refer to CoA/Spec Sheet.
Guidance on interpretation (general):
Research-grade solids of this class are typically offered with assay and chromatographic purity determined by HPLC/GC and identity by NMR/HRMS. When available, the CoA will list assay, residual solvents, and related substances limits.
If designated as “analytical reference standard” in other contexts, additional documentation (purity by quantitative NMR, water content by Karl Fischer, and certified value with uncertainty) may be provided; this is not specified for this item.
Stabilizers: None are indicated in the Product Data. If stabilizers or anti-oxidants are present, they will be declared on the CoA/label; absence here should not be taken as confirmation—verify in the CoA.
What to verify before use:
Identity (NMR/LC–MS retention match), assay/purity, residual solvent content, and any polymorph information if relevant to your application.
For quantitative work, confirm purity on your instrument setup (e.g., orthogonal HPLC method) and correct for water/volatile content if reported.
Reaction and Applications
Manufacturer-specific application notes were not provided. The following summarizes typical uses for 4‑hydroxycoumarin chloroaryl derivatives (general/literature):
Analytical reference and method development
Employed as a system suitability or retention marker in chromatographic methods for anticoagulant rodenticides.
Used to develop/validate LC–MS/MS methods in complex matrices (environmental, food safety), including extraction and cleanup workflows.
Biochemical studies
Probe compound for investigating vitamin K epoxide reductase (VKOR) pathway inhibition and structure–activity relationships within the coumarin class.
Synthetic context
Starting point for O‑alkylation, acylation, or protective-group manipulations on the phenolic OH.
Platform for preparing labeled analogs (e.g., 13C/2H) for quantitative analytical standards.
Practical tips
Handle as a light-sensitive, aromatic solid; minimize prolonged exposure to strong base to avoid undesired lactone opening or salt formation.
For analytical stocks, prepare in dry DMSO or ACN at known concentration, aliquot, and store protected from light to maintain integrity.
For extractions, leverage strong partitioning into mid-polar organics (EtOAc/MeCN) and, if needed, mild basification to form the phenolate for phase-transfer—then re-acidify prior to analysis.
Reaction Conditions
No item-specific reaction conditions are provided. The following are general, literature-guided considerations for transforming 4‑hydroxycoumarin chloroaryl derivatives:
O‑Alkylation/acylation of the phenol
Base: K2CO3, Cs2CO3, or NaH in polar aprotic solvents (DMF, DMSO, acetone, MeCN).
Temperature: 0–60°C typically; monitor to avoid lactone opening.
Cross-coupling on aryl chloride (if accessible)
Catalysts: Pd(0/II) systems with biaryl phosphines or NHC ligands; Ni catalysis as alternative.
Conditions: bases such as K3PO4/Cs2CO3; solvents like toluene, dioxane, MeCN; 60–110°C depending on substrate activation.
Protection strategies
Phenol protection (e.g., benzyl, TBDMS) under mild conditions to enable multi-step manipulations.
Purification
Normal-phase silica using EtOAc/hexanes or DCM/MeOH mixtures; reverse-phase preparative LC with ACN/H2O + 0.1% acid/base modifiers for analytical standards.
Stability
Avoid prolonged exposure to strong base or high temperatures that can induce lactone hydrolysis or rearrangement. Protect from light to minimize photodegradation.
Specific temperatures, equivalents, and yields should be optimized experimentally for the exact structure and are not specified for this item.
Safety and Handling
Hazard classifications and statements are not provided in the Product Data for this item. Refer to the product SDS for authoritative safety information.
GHS information
Signal Word: Not specified for this item; refer to CoA/Spec Sheet/SDS.
H-Statements: Not specified for this item; refer to SDS.
Pictograms: Not specified for this item; refer to SDS.
GHS Classification: Not specified for this item; refer to SDS.
General hazards (class-based, literature)
4‑Hydroxycoumarin derivatives can act as vitamin K cycle antagonists; avoid ingestion, inhalation, and skin exposure. Handle in a chemical fume hood.
Potential for environmental toxicity (rodenticide class); prevent release to the environment.
PPE and handling
Use lab coat, nitrile gloves, and splash goggles; avoid aerosol/dust generation.
Employ closed transfer where feasible; decontaminate work surfaces after use.
Storage and incompatibilities
Storage: Room temperature per Product Data; keep tightly closed in a dry, well-ventilated place, protected from light.
Incompatibilities (general): strong oxidizers; strong bases/acids may affect the phenolic/lactone functionality.
First-aid overview (consult SDS)
Inhalation: move to fresh air; seek medical advice.
Skin/eye contact: rinse with water for several minutes; remove contaminated clothing; obtain medical attention.
Ingestion: rinse mouth; do NOT induce vomiting; seek immediate medical advice.
Solvent Selection
Coumarin-based aromatic solids like Coumachlor are generally non-volatile and lipophilic with a weakly acidic phenolic OH. For dissolution and processing, consider the following (general/literature guidance):
Preferred solvents for stock solutions
DMSO: excellent solvency; commonly used for analytical stocks and bioassays.
Acetone, acetonitrile, ethanol, methanol: good solvency; choose based on downstream compatibility.
Dichloromethane, chloroform, ethyl acetate: effective for workups and chromatography; ensure appropriate ventilation.
Aqueous systems
Poor water solubility is typical. Aqueous dissolution may be improved via co-solvents (≤1–5% DMSO/MeOH/EtOH), surfactants, or pH adjustment (partial ionization of the phenolic OH under basic conditions).
Polarity and partitioning
Expect strong partitioning into organic phases; this informs extraction and cleanup strategies.
Quick comparison (general)
DMSO vs MeOH: DMSO affords higher solubility; MeOH is more volatile and LC-friendly.
ACN vs EtOAc: ACN is miscible with water (HPLC-friendly); EtOAc is greener and useful for LLE but less miscible with water.
Always verify solvent purity and compatibility with your analytical or preparative method. For specific solubility values of this SKU, consult the CoA or measure empirically.
Storage and Reconstitution
Storage conditions (from Product Data): Store at room temperature. Protect from light and moisture in a tightly closed container. Ship at ambient temperature (Normal), as indicated.
Reconstitution
For analytical stocks: dissolve in dry DMSO, ACN, MeOH, or ethanol. Sonication and gentle warming (≤40°C) can assist dissolution; avoid prolonged heating.
For aqueous work: dilute organic stock into buffered media with vigorous mixing; keep final organic solvent content low to prevent precipitation.
Stability
General guidance: Aromatic 4‑hydroxycoumarins are typically stable as solids under dry, dark conditions. Avoid strong bases and oxidants.
If long-term storage of solutions is required, prepare aliquots and store protected from light at low temperature (e.g., 2–8°C) to minimize degradation; verify stability by LC before critical use.
Packaging and labeling
Use amber vials to limit photodegradation. Record concentration, solvent, and date of preparation on all stock solutions.
For any item-specific stability limits, retest dates, or impurity specifications, consult the CoA/Spec Sheet.
Structure and Identity
Coumachlor is a 4-hydroxycoumarin–class aromatic compound often discussed within the family of vitamin K cycle antagonists (coumarin anticoagulants).
Item-specific identifiers
CAS: 81-82-3
SKU: C122447
Product Name: Coumachlor
InChIKey: Not specified for this item; refer to CoA/Spec Sheet. (Product Data lists “61294,” which is not a standard InChIKey.)
SMILES: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Formula: Not specified for this item; refer to CoA/Spec Sheet.
Molecular Weight: Not specified for this item; refer to CoA/Spec Sheet.
Structural class and features (general/literature)
Core ring system: coumarin (1-benzopyran-2-one) bearing a phenolic hydroxyl at the 4-position (4-hydroxycoumarin scaffold).
Typical substitution: aryl/alkyl-aryl side chain at C-3 of the coumarin nucleus; “Coumachlor” denotes a chloroaryl-containing member of this class.
Functional groups: lactone (coumarin), phenolic OH (weakly acidic), and aryl chloride on the pendant ring.
2D description: fused benzene–pyrone ring (coumarin) with a 4-hydroxyl; a substituted chlorophenyl moiety extends from C-3 via a benzylic linkage.
Note: Precise constitutional assignment (e.g., regiochemistry of the chloro substituent and exact side-chain structure) should be confirmed against the item’s CoA/Spec Sheet for definitive structural identifiers.
Synthetic Utility
From a synthetic perspective (general/literature for 4‑hydroxycoumarins):
Functional handles
Phenolic OH: amenable to O‑alkylation, O‑acylation, carbonate/carbamate formation, and temporary protection (e.g., benzyl, silyl) for multistep sequences.
Aromatic chloride (on the pendant ring): potential for cross-coupling (e.g., Suzuki–Miyaura, Buchwald–Hartwig after activation) to access analog libraries; reactivity depends on ring electronics and position.
Activated lactone: conditions that open/close the lactone must be controlled; strong base can lead to ring opening or enolate chemistry at C‑3.
Library synthesis
Diversification around the aryl chloride enables SAR studies versus VKOR and related targets.
Late-stage O‑functionalization can modulate solubility and analytical response.
Isotopic labeling
Introduction of 2H/13C at benzylic or ring positions yields internal standards for LC–MS quantitation.
Caution: When designing routes, consider the compound’s sensitivity to strong base and potential for E/Z or tautomeric equilibria involving the 4‑hydroxy/4‑oxo forms. Verify structural assignments by NMR (phenolic vs lactone signals) and HRMS.
Target Specificity
Not applicable. This product is a small-molecule reagent, not an antibody or biologic. No antigen/epitope, clone, isotype, or species reactivity data apply.
Häufig gestellte Fragen
What is the purity of this product?
This product is supplied at ≥98% purity (chemical assay). Lot-specific values are stated on the Certificate of Analysis.
How should this product be stored?
Store at room temperature.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 81-82-3, the molecular formula is C19H15ClO4, and the molecular weight is 342.77 g/mol. InChIKey DEKWZWCFHUABHE-UHFFFAOYSA-N.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.
Wir verwenden Cookies, um die ordnungsgemäße Funktion der Website sicherzustellen und, soweit zulässig, Ihr Nutzererlebnis zu verbessern. Sie können Ihre Einstellungen jederzeit unter „Einstellungen“ verwalten. Weitere Informationen finden Sie in unserer Cookie-Richtlinie.
Dürfen wir Sie über Rabattaktionen informieren?
Später erinnern
Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.