QUALITÄT & REINHEITBioReagent?BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility.
For the determination of total psychrotrophic bacterial counts in milk and dairy products
Spezifikationen
Spezifikationen & Reinheit
BioReagent
Storage
Room temperature
Verschickt in
Normal
Note
BioReagent
Product Line
Biologische Produkte
Erweiterte Daten
Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:
Lösungsrechner
Molarity Calculator
Determine the necessary mass, volume, or concentration for preparing a solution.
Dilution Calculator
Determine the dilution needed to prepare a stock solution.
Reconstitution Calculator
Bewertungen
Kundenbewertungen
Application Protocols
Item‑specific validated protocols are not provided. The following describes general, non‑specification guidance for preparing and using agar media in research settings. Always defer to the CoA/Spec Sheet and internal SOPs.
General plate preparation (literature/general)
Weigh dehydrated medium per the label’s g/L instruction (Not specified for this item).
Add to purified water; heat with stirring to dissolve. Adjust final volume as needed.
Autoclave per SOP. Cool to ~45–50 °C. If required, aseptically add sterile supplements.
Pour 20–25 mL per 90‑mm plate (or volume per SOP). Allow to solidify. Store plates inverted in sealed sleeves.
Use in microbiology workflows
Streak for isolation using sterile loops. Incubate at organism‑appropriate temperature and atmosphere (aerobic/CO2/microaerophilic) per your method.
Include positive and negative control strains to verify selectivity and recovery. Perform growth‑promotion tests at defined inoculum levels.
Record lot number, preparation date, and any supplements added for traceability.
Quality checks
Inspect plates for clarity, uniform gel strength, and absence of contamination or excessive surface moisture before use.
All parameters above are general; item‑specific concentrations, pH, and performance criteria are Not specified for this item.
Biological Roles
Not applicable as a single molecule. CVT Agar Medium is a formulated microbiological growth matrix and does not possess intrinsic biochemical “roles” like a defined metabolite. Instead, it provides:
Nutritional support (general): Amino acids, peptides, carbohydrates, and minerals (depending on formulation) to enable microbial growth and colony formation.
Physical support: A semi‑solid agar surface that spatially separates colonies for isolation and morphological observation.
Selectivity (formulation‑dependent): Literature CVT formulations often incorporate antibiotics to inhibit competing flora; whether this specific item includes such agents is Not specified.
For organism‑specific metabolic pathways, consult the medium’s exact formulation on the CoA/Spec Sheet and align with the nutritional requirements of your target microbe.
Buffer Applications
This product is not a conventional buffer system. While many culture media include inherent buffering capacity to stabilize pH during microbial growth, CVT Agar Medium is intended for plating/isolation rather than as a standalone buffer.
If your workflow requires defined buffering (e.g., for enzyme assays), use a dedicated buffer (phosphate, HEPES, MOPS) prepared separately.
The exact buffering components and target pH of this item are Not specified; refer to CoA/Spec Sheet.
Green Alternatives
For microbiological media, “green alternatives” focus on sustainable preparation and waste minimization rather than solvent replacement.
Strategies (general guidance)
Energy efficiency: Use validated autoclave cycles matched to load size to reduce energy and water usage. Avoid over‑sterilization that can degrade media and increase waste.
Water stewardship: Prepare only the volume required for near‑term use. Use closed transfer to minimize spills and rework. Where permitted, capture autoclave condensate/effluent for appropriate treatment.
Packaging choices: Choose bulk dehydrated media to reduce single‑use plastics from pre‑poured plates if your workflow allows in‑house pouring.
Waste reduction: Plan plate pouring to match experimental throughput. Segregate clean vs biohazard waste streams to limit the volume requiring high‑temperature treatment.
Safer chemistries: If the application allows, prefer media without heavy‑metal inhibitors or volatile/irritant components. For antibiotic‑supplemented media, evaluate narrower‑spectrum alternatives to reduce environmental antibiotic load in waste (subject to biosafety and experimental requirements).
Comparison table (conceptual)
Conventional approach: Prepare surplus plates “just in case,” long autoclave cycles, broad‑spectrum antibiotic cocktails.
Greener approach: Right‑sized batches, optimized sterilization, and minimal/selective supplements validated for the target organisms.
These practices are general; item‑specific composition and disposal requirements are Not specified—consult SDS and institutional EHS.
Pharmaceutical Uses
No therapeutic or clinical claims are made. For research use only.
Potential roles (manufacturing QC/research context, general): Agar media are commonly used in environmental monitoring, bioburden testing, and microbial identification in pharmaceutical labs. Whether this specific CVT Agar Medium is validated or compendial for any QC use is not specified.
Pharmacopeial status: Not specified for this item; consult relevant pharmacopeias and your quality unit. CVT‑type selective media are generally not compendial unless explicitly stated.
Validation: If considered for GMP support activities, perform full method suitability and growth‑promotion testing with documented acceptance criteria. Rely on the lot‑specific CoA.
This product is supplied as BioReagent grade for laboratory research; it is not designated for diagnostic or clinical use.
Physical Properties
Item‑specific physicochemical specifications are not provided in the Product Data for SKU C1528525.
Appearance: Not specified for this item; refer to CoA/Spec Sheet.
Form: Complex mixture (typical products may be supplied as dehydrated powder or pre‑poured plates; exact form is Not specified for this item).
Solubility (literature/general): Dehydrated culture media are typically reconstituted in purified water before sterilization; agar components hydrate upon heating and form a gel on cooling (~35–45 °C). Exact reconstitution mass/volume for this item is Not specified.
pH (literature/general): Finished media often target pH ~6.8–7.4 at 25 °C, but the precise pH range and tolerance for this item are Not specified.
Melting/solidification (literature/general): Agar gels liquefy near 85–95 °C and solidify near 35–45 °C; exact transition behavior depends on formulation and ionic strength.
Density, refractive index, osmolality: Not specified for this item; refer to CoA/Spec Sheet.
Important
Do not treat literature values as specifications. For method development and QC, use the lot‑specific CoA to confirm reconstitution mass, pH setpoint, sterilization conditions, and any supplementing instructions.
Quality and Grades
Grade: BioReagent (per Product Data). In common laboratory parlance, BioReagent grade denotes material suitable for biological research applications, with manufacturing and QC controls aligned to reproducible performance in life‑science workflows. It is not a clinical/diagnostic grade.
What this means in practice
Performance focus: Emphasis on microbial growth performance, selectivity, and clarity/gel strength (as applicable); exact acceptance criteria for this item are Not specified—refer to CoA/Spec Sheet for lot‑specific QC parameters (e.g., growth promotion testing, pH of finished medium).
Purity profile: For formulated media, “purity” is not expressed as a single numerical assay; rather, control of raw‑material bioburden, endotoxin (if relevant), and functional growth tests are common. Specific limits for this item are Not specified.
Stabilizers/preservatives: Some prepared media may include stabilizers or antimicrobial supplements; none are specified for this item.
Suitability: For research use only (per Product Data). Not for use in humans or animals, therapeutics, or diagnostic procedures.
Documentation and traceability
Lot‑specific Certificate of Analysis (CoA) should define reconstitution mass, target pH, sterility test, and growth‑promotion organisms (if applicable). Request and retain CoA for regulated work, method validation, and audit trails.
Reaction and Applications
This product is a culture medium for microbiology, not a chemical reagent for synthetic reactions. Applications relate to microbial cultivation and isolation.
Intended use (general, literature): CVT‑designated agar formulations in the literature commonly denote selective media in which antibiotic combinations (e.g., colistin, vancomycin, trimethoprim) suppress background flora while permitting the growth of target organisms. However, the exact selectivity profile and component list for this specific item are Not specified; consult the CoA/Spec Sheet for the definitive formulation and growth‑promotion claims.
Typical laboratory workflows:
Preparation of sterile agar plates for streaking, isolation, and colony morphology assessment.
Use in environmental monitoring, basic research on microbial physiology, or method development where a CVT‑type selectivity is desired and documented for the specific lot.
Supplementation (if applicable): Many selective media are supplied as a base to which sterile antibiotic solutions are added after autoclaving and cooling to ~45–50 °C. Whether this product requires supplementation is Not specified.
Practical considerations:
Verify medium pH post‑autoclave if your SOP requires it; adjust only with sterile, validated solutions.
Document lot numbers and plate preparation dates for traceability; some supplements are light/temperature sensitive.
Perform in‑house growth‑promotion tests with relevant control strains to confirm selectivity and recovery under your conditions.
Note: For research use only; not validated for clinical diagnostics.
Reaction Conditions
Not applicable to chemical reactions. For microbiological preparation (general guidance only; item‑specific values are Not specified):
Reconstitution: Disperse dehydrated medium in purified water at the label‑specified concentration (g/L). Heat with stirring to dissolve completely.
Sterilization: Autoclave per SOP (e.g., 121 °C; time depends on volume). Avoid excessive sterilization that can cause caramelization or component degradation.
Supplement addition: If antibiotics or selective agents are used, sterile‑filter and add aseptically to the molten medium cooled to ~45–50 °C.
Plate pouring: Dispense into sterile Petri dishes in a clean area; allow to solidify and dry to the desired surface moisture before use.
These are general laboratory practices; consult the CoA/Spec Sheet for precise instructions for this item.
Safety and Handling
Safety information specific to this catalog item is not provided; always consult the SDS for authoritative guidance.
GHS classification, signal word, pictograms, H‑statements: Not specified for this item; refer to SDS.
General hazards (general knowledge): Dehydrated culture media can generate dust—avoid inhalation. Some CVT‑type media in the literature contain antibiotics or selective agents; handle as potentially irritating or sensitizing. Once inoculated, plates/broths become biohazardous and must be handled using appropriate biosafety practices (BSL level suitable for the organism).
PPE: Laboratory coat, safety glasses, and disposable gloves. Use a certified biological safety cabinet when handling infectious materials or creating aerosols.
Incompatibilities: Avoid contact with strong oxidizers. Keep dry until use; moisture uptake can alter performance.
Thermal handling: Use heat‑resistant gloves when melting/dispensing agar (~100 °C). Prevent boil‑over during sterilization.
Sterilization: Autoclave according to internal SOPs (e.g., 121 °C, time per volume). If antibiotics/supplements are required, sterile‑filter and add aseptically after cooling the base medium to ~45–50 °C (general practice; item‑specific directions Not specified).
Spill & disposal: Sweep up powders with minimal dust; dispose of inoculated media by autoclaving before discarding per institutional biohazard procedures.
First aid (overview): If dust is inhaled, move to fresh air. In case of eye/skin contact, rinse with water. Seek medical attention if irritation persists. Always follow SDS.
Solvent Selection
As a microbiological medium, CVT Agar Medium is intended to be reconstituted with purified water rather than used as a reaction solvent.
Primary solvent: Water (Type 1/Type 2 or equivalent laboratory‑grade). The exact reconstitution ratio (g/L) is Not specified for this item; follow the CoA/label.
Dissolution behavior (general): Dehydrated media disperse in cold water but typically require heating to near boiling with agitation to fully dissolve agar. Avoid scorching; use gentle swirling and heat to clarity.
Sterilization: Autoclave the hydrated medium per SOP. If antibiotic/selective supplements are required, sterile‑filter those solutions and add aseptically to the medium cooled to ~45–50 °C to minimize thermal degradation (general practice; item‑specific instructions Not specified).
Container compatibility: Use heat‑resistant borosilicate glass or validated autoclavable polymers. Avoid aluminum foil contact with strongly buffered or chloride‑rich media during prolonged heating.
Comparison (general guidance)
Water vs buffers: Plain water is preferred for initial reconstitution so the medium’s built‑in buffering is preserved. External buffers can distort pH/ionic strength and growth performance unless validated.
Alternative gelling systems: If low‑melting or high‑clarity gels are required, specialized media (e.g., agarose or gellan gum formulations) may be considered; such alternatives are not part of this item.
Storage and Reconstitution
Storage conditions (per Product Data): Room temperature. Keep container tightly closed, protected from moisture and excessive heat. Avoid direct sunlight. Shipped under normal conditions.
Reconstitution and handling (general guidance; item‑specific values Not specified)
Use purified water. Disperse powder gradually with agitation to minimize clumping. Heat to near boiling until fully dissolved.
Sterilize by autoclaving according to SOPs suitable for your vessel volume. Do not over‑sterilize.
If adding heat‑labile supplements (e.g., antibiotics), cool the sterile base to ~45–50 °C before aseptic addition.
Pour plates in a clean environment; allow to solidify. Let surfaces equilibrate/dry to reduce excess condensation.
Storage after preparation (general)
Plates: Store inverted in sealed sleeves or wrapped, typically at 2–8 °C if medium/supplements are perishable; exact shelf life for this item is Not specified. Warm to room temperature before use to minimize condensation.
Broth (if prepared): Store refrigerated and use within the validated hold time; dispose if turbidity or contamination is observed.
Stability and specifications
Exact shelf life, pH setpoint, and reconstitution mass for SKU C1528525 are Not specified for this item; refer to CoA/Spec Sheet.
Research use note: For research use only (per Product Data).
Structure and Identity
CVT Agar Medium is a complex, multi‑component microbiological growth medium. As a formulated mixture, it does not have a single defined molecular structure.
Item type: Dehydrated or prepared culture medium for microbiology (formulation details not provided for this catalog item).
Chemical identity: Mixture (selective/supplemented agar conceptually implied by “CVT,” but the exact composition and any supplements are Not specified for this item; refer to CoA/Spec Sheet.)
Functional constituents (general knowledge): may include agar as a gelling agent, peptones/infusions as nutrient sources, salts/buffers, and optionally selectivity agents or antibiotics depending on formulation. Exact components are Not specified for this item; refer to CoA/Spec Sheet.
Molecular formula: Not applicable to mixtures.
Molecular weight (formula weight): Not applicable to mixtures.
SMILES/InChI/InChIKey: Not applicable (mixture).
Structural features (2D description): Heterogeneous matrix of low‑molecular‑weight nutrients dispersed within a polysaccharide gel (agar) upon hydration and solidification.
Notes
CVT designations in the literature often indicate antibiotic‑supplemented media (e.g., combinations such as colistin/vancomycin/trimethoprim), but the presence and concentration of any supplements in this product are not specified; consult the lot‑specific documentation.
Synthetic Utility
Not applicable. CVT Agar Medium is not used as a reagent or building block in chemical synthesis. It serves as a microbiological growth substrate. For synthetic chemistry applications, refer to solvent and reagent sections of the catalog.
Target Specificity
No target specificity is provided in the Product Data. Some literature CVT media are designed to suppress commensal organisms and favor recovery of particular bacteria through antibiotic supplementation, but the exact target profile for this product is Not specified. Refer to the CoA/Spec Sheet and any growth‑promotion claims for organism coverage.
Benötigen Sie Hilfe bei der Auswahl der Qualität?
Unser Leitfaden zur Qualitätsauswahl behandelt Reinheit, Stabilisatorstatus und Anwendungseignung für alle Varianten in unserem Katalog.
Wir verwenden Cookies, um die ordnungsgemäße Funktion der Website sicherzustellen und, soweit zulässig, Ihr Nutzererlebnis zu verbessern. Sie können Ihre Einstellungen jederzeit unter „Einstellungen“ verwalten. Weitere Informationen finden Sie in unserer Cookie-Richtlinie.
Dürfen wir Sie über Rabattaktionen informieren?
Später erinnern
Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.
Products are supplied to verified businesses, institutions, and qualified professionals for research and development use only. Not for use in humans, animals, diagnosis, or therapy.