Determine the necessary mass, volume, or concentration for preparing a solution.
Detection Wavelength
λmax (chromogenic wavelength) = 666 nm, ε/H₂O₂ (molar absorption coefficient per H₂O₂ molecule) = 9×10⁴
Principle
Hydrogen peroxide is an important intermediate metabolite in the analysis of trace components in organisms, food quality monitoring, environmental substance detection and other applications.DA-64 and DA-67 are water-soluble oxidative chromogenic reagents that enable highly sensitive detection of hydrogen peroxide in the presence of peroxidase.
Traditional water-soluble hydrogen peroxide chromogenic reagents suffer from low molar absorption coefficients of the chromophores. Although some reagents offer high sensitivity, they are difficult to handle due to poor solubility.DA-64 and DA-67 achieve both water solubility and high sensitivity.
In the past, luminescent or fluorescent reagents had to be used to achieve high sensitivity.Now, by using DA-64 and DA-67, the target analytes detected by instruments can be measured with a simple colorimeter.
This product is less affected by coexisting substances and is especially suitable for the detection of biological samples.
Application Examples
Quantitative Determination of H₂O₂
1、Preparation of Chromogenic SolutionDissolve 4.08 mg DA-67 and 1 mL of 100 units/mL peroxidase (POD) in PIPES buffer (0.1 mol/L, pH 7, containing 0.5% Triton X-100), and adjust the volume to 100 mL (100 μmol/L DA-67 solution).
2、Mix 3 mL of the above solution with 10 μL of sample solution (H₂O₂: 0–5 mmol/L), and incubate at 37 °C for 5 minutes.
3、Measure the absorbance at 666 nm using a spectrophotometer.Use the absorbance difference relative to the blank (sample solution replaced with distilled water) as the detection value, and determine the H₂O₂ content in the sample using a separately prepared calibration curve.
Detection of POD Activity
1、Preparation of Chromogenic SolutionDissolve 4.08 mg DA-67 and 1 mL of 2% H₂O₂ in Mcllvaine buffer (0.05 mol/L citric acid, 0.1 mol/L disodium phosphate, pH 5.7), and adjust the volume to 100 mL (100 mmol/L DA-67 solution).
2、Mix 2 mL of the above solution with 2 mL of sample solution (1 fmol–1 pmol POD per tube), and incubate at 37 °C.
3、Measure the absorbance at 666 nm using a spectrophotometer.Use the absorbance difference after subtracting the blank (sample solution replaced with distilled water) as the detection value, and determine the POD content in the sample using a separately prepared calibration curve.
Usage
Colorimetric quantitative determination of hydrogen peroxide
Features
Combines high sensitivity and water solubility
Find and download the COA for your product by matching the lot number on the packaging.
| Lot Number | Certificate Type | Datum | Artikel |
|---|---|---|---|
| Certificate of Analysis | Oct 09, 2026 | D1520424 | |
| Certificate of Analysis | Oct 09, 2026 | D1520424 | |
| Certificate of Analysis | Oct 09, 2026 | D1520424 |
| Löslichkeit | Soluble in water (10 mg/25 mL), directly dissolved in water at a concentration of 1 mmol/L or higher. |
|---|