EB Solution (10 mg/mL) - BioReagent, Suitable for electrophoresis, 10 mg/ml in DMF , CAS No.1239-45-8

CAS: 1239-45-8 Cat. No.: E1526364 Summenformel: C21H20BrN3 Molekulargewicht: 394.32 EG-Nummer: 214-984-6
Zu bestellen verfügbar
QUALITÄT & REINHEIT BioReagent ? BioReagent grade — tested suitable for life-science and molecular-biology use. Use for cell culture, assays, and biochemical work needing biological compatibility. Suitable for electrophoresis ? Electrophoresis grade — low ionic/UV impurities for clean gel runs. Use in agarose/PAGE electrophoresis where impurities distort bands. 10 mg/mL in water (solubilized with DFM)
Synonyms
10 mg/ml Ethidium Bromide Aqueous Solution
Storage
Protected from light,Room temperature
Shipped In
Normal
Application
978
★
Größe
Deutschland (EU)
USA*
Preis
Menge
10ml
E1526364-10ml
Auf Bestellung · 8–12 Wochen
34,62€
Enter a quantity for the sizes you want to add.

Übersicht

Ethidium Bromide (molecular formula: C₂₁H₂₀BrN₃, molecular weight: 394.31) is a highly sensitive fluorescent dye used for visualizing DNA in agarose and polyacrylamide gels. It emits an orange-red fluorescence signal when excited by a 302 nm UV transilluminator. EB is toxic; all EB-containing solutions must be decontaminated before disposal to prevent environmental pollution.  EB Solution (10 mg/mL) is prepared with sterile double-distilled water and is widely applied in electrophoresis of DNA and RNA samples.

Required Materials:

1. Electrophoresis running buffer (e.g., TAE, TBE)

2. Microwave oven

3. UV analyzer or gel documentation imaging system

Operating Protocol:

1. Melt 50 mL agarose gel solution (commonly 0.8-2% concentration) in a microwave oven.

2. Add 50–100 μL Ethidium Bromide stock solution (10 mg/mL) and mix gently to avoid air bubbles.

3. Pour the gel when cooled to 50–60°C (touchable without scalding). After complete solidification, remove the comb, submerge the gel in electrophoresis buffer, and load samples for electrophoresis.

4. Observe, photograph and document the results under a UV analyzer or gel imaging system.

Precautions:

1. Gel thickness should not exceed 0.5 cm; excessive thickness will reduce detection sensitivity.

2. Avoid prolonged UV exposure when recovering DNA fragments via gel electrophoresis.

3. EB is toxic and irritates the skin and eyes. Handle with extreme caution.

4. For personal safety, wear a lab coat, disposable gloves and a face mask during operation.

5. This product is for scientific research use by qualified professionals only. It must not be used for clinical diagnosis or treatment, food or pharmaceutical production, nor stored in residential premises.

Spezifikationen

Synonyme
10 mg/ml Ethidium Bromide Aqueous Solution
Spezifikationen & Reinheit
BioReagent, Suitable for electrophoresis, 10 mg/mL in water (solubilized with DFM)
Stabilität und Lagerung
Store at room temperature long term (12 months).Store in the dark.
Storage
Protected from light,Room temperature
Verschickt in
Normal
Note
BioReagent, Für die Elektrophorese geeignet
Product Line
Biologische Produkte
Namen und Kennungen
Isomere SMILES
CC[N+]1=C2C=C(C=CC2=C3C=CC(=CC3=C1C4=CC=CC=C4)N)N.[Br-]
WGK Deutschland
3
RTECS
SF7950000
UN-Nummer
2810
Verpackungsgruppe
III
Molekulargewicht
394.32
Reaxys
3642536
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=3642536&ln=

Erweiterte Daten

Zertifikate (CoA, COO, BSE/TSE und Analyse-Diagramm)
C of A & Other Certificates(BSE/TSE, COO):
Analytical Chart:

Find and download the COA for your product by matching the lot number on the packaging.

1 results found

Lot NumberCertificate TypeDatumArtikel
ZJ26F1040236ZJ26F1040236Certificate of AnalysisOct 28, 2026 E1526364
Chemische und physikalische Eigenschaften
EmpfindlichkeitLight-sensitive
Schmelzpunkt (°C)260-262°C
Sicherheit und Gefahren (GHS)
Piktogramm(e)
GHS06,   GHS08
Signal
Danger
Gefahrenhinweise

H341:Suspected of causing genetic defects

H302:Harmful if swallowed

H330:Fatal if inhaled

Sicherheitshinweise

P405:Store locked up.

P501:Dispose of contents/container to an approved waste disposal plant.

P264:Wash hands [and …] thoroughly after handling.

P260:Do not breathe dust/fume/gas/mist/vapors/spray.

P284:[In case of inadequate ventilation] Wear respiratory protection.

P281:Use personal protective equipment as required.

P271:Use only outdoors or in a well-ventilated area.

P270:Do not eat, drink or smoke when using this product.

P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P403+P233:Store in a well-ventilated place. Keep container tightly closed.

P330:Rinse mouth.

P320:Specific treatment is urgent (see ... on this label).

P203:Obtain, read and follow all safety instructions before use.

P301+P317:IF SWALLOWED: Get medical help.

P318:if exposed or concerned, get medical advice.

P316:Get emergency medical help immediately.

WGK Deutschland
3
RTECS
SF7950000
Reaxys
3642536
Reaxys-RN_link_address
https://www.reaxys.com/reaxys/secured/hopinto.do?context=S&query=IDE.XRN=3642536&ln=
Klasse
6.1
Merck-Index
4731
FAQs und Artikel
Citations of This Product
Lösungsrechner
Bewertungen

Kundenbewertungen

Häufig gestellte Fragen

What does suitable for electrophoresis mean?
suitable for electrophoresis indicates that the product has been processed and tested for electrophoresis and blotting. Typical specifications include low or undetectable nuclease/protease activity, low endotoxin, controlled microbial limits and high lot-to-lot reproducibility.
What does BioReagent mean?
BioReagent indicates that the product has been processed and tested for biological and biochemical applications. Specifications may include endotoxin limits, microbial controls, sterility, low DNase/RNase/protease activity, and verified biological activity where relevant.
How should this product be stored?
Store at room temperature, protected from light. The material is light-sensitive — keep it in its original opaque or amber container.
How is this product shipped?
This product ships under standard ambient conditions. No temperature-controlled packaging is required.
What are the CAS number, molecular formula and molecular weight?
The CAS Number is 1239-45-8, the molecular formula is C21H20BrN3, and the molecular weight is 394.32 g/mol.
What documentation is provided?
Available product documentation, including Certificates of Analysis (COA), Safety Data Sheets (SDS), and specification sheets, is shown in the product document area. Document availability and access follow the current site policy.

Dürfen wir Sie über Rabattaktionen informieren?

Später erinnern

Vielen Dank! Bitte überprüfen Sie Ihren E-Mail-Posteingang, um zu bestätigen.

Hoppla! Benachrichtigungen sind deaktiviert.